Blaine M. Wruck
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Blaine M. Wruck has a total of 6 co-authors. Here are the top co-authors by number of shared publications:
- Erdem Coleri
School of Civil & Construction Engineering, Oregon State University, Corvallis, OR
3 shared publications - Vikas Kumar
School of Civil & Construction Engineering, Oregon State University, Corvallis, OR
2 shared publications James Batti
School of Civil and Construction Engineering, Oregon State University, Corvallis, OR
1 shared publicationMostafa Estaji
School of Civil and Construction Engineering, Oregon State University, Corvallis, OR
1 shared publication- Richard Villarreal
School of Civil and Construction Engineering, Oregon State University, Corvallis, OR
1 shared publication - Shashwath Sreedhar
School of Civil & Construction Engineering, Oregon State University, Corvallis, OR
1 shared publication
Latest Publications
- 1 September 2022
- Published by SAGE Publications in Transportation Research Record: Journal of the Transportation Research Board
- Vol. 2677 (3) , 535-550
Impact of Emulsion Type, Application Rate, and Adverse Construction Conditions on Tack Coat Performance
The tack coat is a bonding agent applied between new and existing asphalt pavement layers. Roadway construction operations inherently introduce adverse conditions, such as dust on the pavement surface and nonuniform coverage (streaking), which can compromise tack coat bond quality. Climatic conditions such as heavy rainfall also create issues late in the construction season. Newly developed engineered tack coat emulsions, which utilize stiff asphalt binders and polymer modifiers, are purported to improve interlayer bonding characteristics and reduce the propensity of early fatigue cracking and pavement failure. This study evaluates engineered tack coats against conventionally used tack coats in a laboratory setting to identify their benefits when subjected to different pavement surface types, application rates, and commonly experienced adverse roadway construction conditions. Monotonic direct shear testing was employed to characterize interlayer bonding using two response parameters, interlayer shear strength and interlayer bond energy. This study advances the knowledge of engineered tack coat performance under real-world conditions and also employs a laboratory sample preparation methodology that is representative of pavement construction in the field.
- 1 September 2022
- Published by SAGE Publications in Transportation Research Record: Journal of the Transportation Research Board
- Vol. 2677 (3) , 535-550
Impact of Emulsion Type, Application Rate, and Adverse Construction Conditions on Tack Coat Performance
The tack coat is a bonding agent applied between new and existing asphalt pavement layers. Roadway construction operations inherently introduce adverse conditions, such as dust on the pavement surface and nonuniform coverage (streaking), which can compromise tack coat bond quality. Climatic conditions such as heavy rainfall also create issues late in the construction season. Newly developed engineered tack coat emulsions, which utilize stiff asphalt binders and polymer modifiers, are purported to improve interlayer bonding characteristics and reduce the propensity of early fatigue cracking and pavement failure. This study evaluates engineered tack coats against conventionally used tack coats in a laboratory setting to identify their benefits when subjected to different pavement surface types, application rates, and commonly experienced adverse roadway construction conditions. Monotonic direct shear testing was employed to characterize interlayer bonding using two response parameters, interlayer shear strength and interlayer bond energy. This study advances the knowledge of engineered tack coat performance under real-world conditions and also employs a laboratory sample preparation methodology that is representative of pavement construction in the field.
- 29 November 2021
- Published by SAGE Publications in Transportation Research Record: Journal of the Transportation Research Board
- Vol. 2676 (4) , 255-266
Quantifying In Situ Tack Coat Performance Using the TackBond Tester for Quality Control
In light of the various quality assurance (QA) issues pertaining to tack coats that occur during construction, there is a need for a means of verifying interlayer bond quality in situ. Despite the immense use of tack coat as a constituent in paving, there are no construction specifications with provisions for the quantification of tack coat bond quality in laboratory or field settings. In this study, a construction QA process for tack coat bond performance was proposed. A novel field tack coat bond strength test device, TackBond, was developed and used for this purpose. The performance of engineered (new tack coat technologies that are tracking less) and conventional tack coats was also evaluated in the laboratory and the field using the developed TackBond test system. The TackBond device was improved in this study by adding features that render it more practical, portable, accurate, and better suited for a variety of pavement surface conditions. Engineered tack coat performance was compared with that of tack coats used conventionally on both milled and overlay surface types. The suitability of the TackBond Test device for capturing the true response of each tack coat was first evaluated by comparing results from TackBond laboratory tests with monotonic direct shear tests (DST) on laboratory-produced samples. Strong correlations between the two test types were achieved. Results of field and laboratory TackBond tests showed that the in situ QA control process developed in this study could be effectively used to improve the in situ tack coat bond performance.
- 29 November 2021
- Published by SAGE Publications in Transportation Research Record: Journal of the Transportation Research Board
- Vol. 2676 (4) , 255-266
Quantifying In Situ Tack Coat Performance Using the TackBond Tester for Quality Control
In light of the various quality assurance (QA) issues pertaining to tack coats that occur during construction, there is a need for a means of verifying interlayer bond quality in situ. Despite the immense use of tack coat as a constituent in paving, there are no construction specifications with provisions for the quantification of tack coat bond quality in laboratory or field settings. In this study, a construction QA process for tack coat bond performance was proposed. A novel field tack coat bond strength test device, TackBond, was developed and used for this purpose. The performance of engineered (new tack coat technologies that are tracking less) and conventional tack coats was also evaluated in the laboratory and the field using the developed TackBond test system. The TackBond device was improved in this study by adding features that render it more practical, portable, accurate, and better suited for a variety of pavement surface conditions. Engineered tack coat performance was compared with that of tack coats used conventionally on both milled and overlay surface types. The suitability of the TackBond Test device for capturing the true response of each tack coat was first evaluated by comparing results from TackBond laboratory tests with monotonic direct shear tests (DST) on laboratory-produced samples. Strong correlations between the two test types were achieved. Results of field and laboratory TackBond tests showed that the in situ QA control process developed in this study could be effectively used to improve the in situ tack coat bond performance.
- Open Access
- 6 March 2020
- Published by SAGE Publications in Transportation Research Record: Journal of the Transportation Research Board
- Vol. 2674 (3) , 317-328
Investigation of Tack Coat Bond Damage Mechanism in Asphalt Surfaced Pavements under Dynamic Truck Loads
Bonding created by the tack coat allows the pavement system to carry heavy truck loads as a monolithic structure and improves the structural integrity. In Oregon and throughout the U.S.A., CSS-1H is the most commonly used tack coat type. However, field observations have revealed that new engineered tack coats, although more expensive, outperform the conventional types in relation to shear resistance. In this study, the impact of these new engineered emulsions on in-situ bond performance was quantified by laboratory testing and numerical modeling. Bonding damage performance of all tack coats was experimentally determined by using direct shear tests. Full-scale moving truck load models were developed and calibrated using the load-displacement parameters obtained from the laboratory shear tests. The impact of adverse construction conditions, such as dust, rain, and tack coat coverage, on tack coat bond damage under heavy truck loads was determined. It was concluded that the presence of dust had relatively the lowest contribution to shear damage. Rain during construction had the highest impact on the damage behavior and tack coat application on a wet surface increases the potential for damage by 20.1%. A 50% coverage of tack coat during construction resulted in 12.8% higher damage levels compared with 100% tack coat coverage of the surface area. Moving load models for heavy trucks caused 2.44 times more bonding damage at the bonded interface compared with the damage created by smaller trucks (F450).
- 6 March 2020
- Published by SAGE Publications in Transportation Research Record: Journal of the Transportation Research Board
- Vol. 2674 (3) , 317-328
Open AccessInvestigation of Tack Coat Bond Damage Mechanism in Asphalt Surfaced Pavements under Dynamic Truck Loads
Bonding created by the tack coat allows the pavement system to carry heavy truck loads as a monolithic structure and improves the structural integrity. In Oregon and throughout the U.S.A., CSS-1H is the most commonly used tack coat type. However, field observations have revealed that new engineered tack coats, although more expensive, outperform the conventional types in relation to shear resistance. In this study, the impact of these new engineered emulsions on in-situ bond performance was quantified by laboratory testing and numerical modeling. Bonding damage performance of all tack coats was experimentally determined by using direct shear tests. Full-scale moving truck load models were developed and calibrated using the load-displacement parameters obtained from the laboratory shear tests. The impact of adverse construction conditions, such as dust, rain, and tack coat coverage, on tack coat bond damage under heavy truck loads was determined. It was concluded that the presence of dust had relatively the lowest contribution to shear damage. Rain during construction had the highest impact on the damage behavior and tack coat application on a wet surface increases the potential for damage by 20.1%. A 50% coverage of tack coat during construction resulted in 12.8% higher damage levels compared with 100% tack coat coverage of the surface area. Moving load models for heavy trucks caused 2.44 times more bonding damage at the bonded interface compared with the damage created by smaller trucks (F450).