Prakash Ankitha Arvan
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Prakash Ankitha Arvan has a total of 3 co-authors. Here are the top co-authors by number of shared publications:
Madasamy Arockiasamy
Professor and Director, Center for Infrastructure and Constructed Facilities, Dept. of Civil, Environmental, and Geomatics Engineering, Florida Atlantic Univ., Boca Raton, FL 33431-0991
4 shared publications- Madasamy Arockiasamy
Center for Infrastructure and Constructed Facilities, Department of Civil, Environmental and Geomatics Engineering, Florida Atlantic University, Boca Raton, FL 33431-0991, USA
2 shared publications - Rahul Dev Raju
Department of Ocean and Mechanical Engineering, Florida Atlantic University, Boca Raton, FL 33431, USA
1 shared publication
Latest Publications
- Open Access
- 7 July 2022
- Published by MDPI AG in Geotechnics
- Vol. 2 (3) , 570-598
Energy-Based Approach: Analysis of a Laterally Loaded Pile in Multi-Layered Non-Linear Elastic Soil Strata
Several studies have been reported in published literature on analytical solutions for a laterally loaded pile installed in a homogeneous single soil layer. However, piles are rarely installed in an ideal homogeneous single soil layer. The present study describes a new continuum-based analysis or energy-based approach for predicting the pile displacement responses subjected to static lateral loads and moments considering the soil non-linearity. This analytical analysis treats the pile as an elastic Euler–Bernoulli beam and the soil as a three-dimensional (3D) continuum in which the non-linear elastic properties are described by a modulus degradation relationship. The principle of virtual work was applied to the energy equation of a pile–soil system in order to obtain the governing differential equation for the pile and soil displacements. An iterative procedure was adopted to solve the equations numerically using a finite difference method (FDM). The pile displacement response was obtained using the software MATLAB R2021a, and the results from the energy-based method were compared with those obtained from the field test data as well as the finite element analysis (FEA) based on the software ANSYS Workbench 2021R1. The present study investigated the effect of explicit incorporation of soil properties and layering through a parametric study in order to understand the importance of predicting appropriate pile displacement responses in a linear elastic soil system. The responses indicated that the effect of soil layers and their thicknesses, pile properties and the variation in soil moduli have a direct impact on the displacements of piles subjected to lateral loading. Hence, a proper emphasis has to be given to account for the soil non-linearity. Considering the effect of soil non-linearity, it is observed that the results obtained from the energy-based method agreed well with the field measured values and those obtained from the FEA. The results indicated a difference of approximately less than 7% between the proposed method and the FEA. The approach presented in this study can be further extended to piles embedded in multi-layered soil strata subjected to the combined action of axial loads, lateral loads and moments. Furthermore, the same approach can be extended to study the response of the soil to group piles.
- 7 July 2022
- Published by MDPI AG in Geotechnics
- Vol. 2 (3) , 570-598
Open AccessEnergy-Based Approach: Analysis of a Laterally Loaded Pile in Multi-Layered Non-Linear Elastic Soil Strata
Several studies have been reported in published literature on analytical solutions for a laterally loaded pile installed in a homogeneous single soil layer. However, piles are rarely installed in an ideal homogeneous single soil layer. The present study describes a new continuum-based analysis or energy-based approach for predicting the pile displacement responses subjected to static lateral loads and moments considering the soil non-linearity. This analytical analysis treats the pile as an elastic Euler–Bernoulli beam and the soil as a three-dimensional (3D) continuum in which the non-linear elastic properties are described by a modulus degradation relationship. The principle of virtual work was applied to the energy equation of a pile–soil system in order to obtain the governing differential equation for the pile and soil displacements. An iterative procedure was adopted to solve the equations numerically using a finite difference method (FDM). The pile displacement response was obtained using the software MATLAB R2021a, and the results from the energy-based method were compared with those obtained from the field test data as well as the finite element analysis (FEA) based on the software ANSYS Workbench 2021R1. The present study investigated the effect of explicit incorporation of soil properties and layering through a parametric study in order to understand the importance of predicting appropriate pile displacement responses in a linear elastic soil system. The responses indicated that the effect of soil layers and their thicknesses, pile properties and the variation in soil moduli have a direct impact on the displacements of piles subjected to lateral loading. Hence, a proper emphasis has to be given to account for the soil non-linearity. Considering the effect of soil non-linearity, it is observed that the results obtained from the energy-based method agreed well with the field measured values and those obtained from the FEA. The results indicated a difference of approximately less than 7% between the proposed method and the FEA. The approach presented in this study can be further extended to piles embedded in multi-layered soil strata subjected to the combined action of axial loads, lateral loads and moments. Furthermore, the same approach can be extended to study the response of the soil to group piles.
- Open Access
- 6 July 2022
- Published by MDPI AG in Geotechnics
- Vol. 2 (3) , 549-569
Energy-Based Approach: Analysis of a Vertically Loaded Pile in Multi-Layered Non-Linear Soil Strata
Numerous studies have been reported in the published literature on analytical solutions for a vertically loaded pile installed in a homogeneous single soil layer. However, piles are rarely installed in an ideal homogeneous single soil layer. This study presents an analytical model based on the energy-based approach to obtain displacements in an axially loaded pile embedded in multi-layered soil considering soil non-linearity. The developed analytical model incorporating Euler-Bernoulli beam theory proved to be an effective way in estimating the load-displacement responses of piles embedded in multi-layered non-linear elastic soil strata. The differential equations are solved analytically and numerically using the variational principle of mechanics. A parametric study investigated the effect of explicit incorporation of soil properties and layering in order to understand the importance of predicting appropriate pile displacement responses in linear elastic soil system. It is clear from the results that the analyses which consider the soil as a single homogeneous layer will not be able to produce an accurate estimation of the pile stiffnesses. Therefore, it is highly important to account for the effect of soil layering and the non-linear response. The pile displacement response is obtained using the software MATLAB R2019a and the results from the energy-based method are compared with those obtained from the field test data as well as the Finite Element Analysis (FEA) based on the software ANSYS 2019R3. The non-linear elastic constitutive relationship which described the variation of secant shear modulus with strain through a power law has shown reasonably accurate predictions when compared to the published field test data and the FEA. The developed mathematical framework is also more computationally efficient than the three-dimensional (3D) FEA.
- 6 July 2022
- Published by MDPI AG in Geotechnics
- Vol. 2 (3) , 549-569
Open AccessEnergy-Based Approach: Analysis of a Vertically Loaded Pile in Multi-Layered Non-Linear Soil Strata
Numerous studies have been reported in the published literature on analytical solutions for a vertically loaded pile installed in a homogeneous single soil layer. However, piles are rarely installed in an ideal homogeneous single soil layer. This study presents an analytical model based on the energy-based approach to obtain displacements in an axially loaded pile embedded in multi-layered soil considering soil non-linearity. The developed analytical model incorporating Euler-Bernoulli beam theory proved to be an effective way in estimating the load-displacement responses of piles embedded in multi-layered non-linear elastic soil strata. The differential equations are solved analytically and numerically using the variational principle of mechanics. A parametric study investigated the effect of explicit incorporation of soil properties and layering in order to understand the importance of predicting appropriate pile displacement responses in linear elastic soil system. It is clear from the results that the analyses which consider the soil as a single homogeneous layer will not be able to produce an accurate estimation of the pile stiffnesses. Therefore, it is highly important to account for the effect of soil layering and the non-linear response. The pile displacement response is obtained using the software MATLAB R2019a and the results from the energy-based method are compared with those obtained from the field test data as well as the Finite Element Analysis (FEA) based on the software ANSYS 2019R3. The non-linear elastic constitutive relationship which described the variation of secant shear modulus with strain through a power law has shown reasonably accurate predictions when compared to the published field test data and the FEA. The developed mathematical framework is also more computationally efficient than the three-dimensional (3D) FEA.
- 1 May 2022
- Published by American Society of Civil Engineers (ASCE) in Practice Periodical on Structural Design and Construction
- Vol. 27 (2) , 03122001
Behavior, Performance, and Evaluation of Prestressed Concrete/Steel Pipe/Steel H-Pile to Pile Cap Connections
Better understanding of the connection between piles and pile caps/footings is needed so that future designs and design reviews can be adequately performed. This review paper presented discussions on the published experimental and analytical studies on prestressed concrete piles, steel H-piles, or steel pipe piles with cast-in-place (CIP) or precast footings, and/or pile cap connections with a focus on (1) pile embedment to achieve a fully fixed or pinned moment connection; (2) behavior of the pile embedment length when not treated by a special connection detail; and (3) reinforcement details to decrease the embedment length and develop fixity with a plain pile. The length of the pile embedment contributing to achieving a full fixity condition has a critical impact on substructure cost involving pile-to-pile cap (PTPC) connections. The design procedures involving piles subjected to lateral loading require a proper understanding of the fixity and ductility levels provided by the PTPC connections. Discussions on finite-element analyses (FEAs) were presented, including behavior predictions of the connections at both global and local levels. The study points to the need for modifications to the design of the PTPC connections in the existing standard codes/specifications.
- 1 May 2022
- Published by American Society of Civil Engineers (ASCE) in Practice Periodical on Structural Design and Construction
- Vol. 27 (2) , 03122001
Behavior, Performance, and Evaluation of Prestressed Concrete/Steel Pipe/Steel H-Pile to Pile Cap Connections
Better understanding of the connection between piles and pile caps/footings is needed so that future designs and design reviews can be adequately performed. This review paper presented discussions on the published experimental and analytical studies on prestressed concrete piles, steel H-piles, or steel pipe piles with cast-in-place (CIP) or precast footings, and/or pile cap connections with a focus on (1) pile embedment to achieve a fully fixed or pinned moment connection; (2) behavior of the pile embedment length when not treated by a special connection detail; and (3) reinforcement details to decrease the embedment length and develop fixity with a plain pile. The length of the pile embedment contributing to achieving a full fixity condition has a critical impact on substructure cost involving pile-to-pile cap (PTPC) connections. The design procedures involving piles subjected to lateral loading require a proper understanding of the fixity and ductility levels provided by the PTPC connections. Discussions on finite-element analyses (FEAs) were presented, including behavior predictions of the connections at both global and local levels. The study points to the need for modifications to the design of the PTPC connections in the existing standard codes/specifications.
- Open Access
- 30 November 2021
- Published by Springer Nature in Research Square
Energy-Based Approach for the Analysis of a Vertically Loaded Pile in Multi-layered Non-linear Soil Strata
Numerous studies have been reported in published literature on analytical solutions for a vertically loaded pile installed in a homogeneous single soil layer. However, piles are rarely installed in an ideal homogeneous single soil layer. This study presents an energy-based approach to obtain displacements in an axially loaded pile embedded in multi-layered soil considering soil non-linearity. A simple power law based on published literature is used where the soil is assumed to be nonlinear-elastic and perfectly plastic. A Tresca yield surface is assumed to develop the soil stiffness variation with different strain levels that defines the non-linearity of the soil strata. The pile displacement response is obtained using the software MATLAB R2019a and the results from the energy-based method are compared with those obtained from the field test data as well as the finite element analysis based on the software ANSYS 2019R3. It is observed that the results obtained from the energy-based method are in better agreement with the field measured values than those obtained from the FEA. The approach presented in this study can be extended to piles embedded in multi-layered soil strata subjected to different cases of lateral loads as well as the combined action of lateral and axial loads. Furthermore, the same approach can be extended to study the response of the soil to group piles.
- 30 November 2021
- Published by Springer Nature in Research Square
Open AccessEnergy-Based Approach for the Analysis of a Vertically Loaded Pile in Multi-layered Non-linear Soil Strata
Numerous studies have been reported in published literature on analytical solutions for a vertically loaded pile installed in a homogeneous single soil layer. However, piles are rarely installed in an ideal homogeneous single soil layer. This study presents an energy-based approach to obtain displacements in an axially loaded pile embedded in multi-layered soil considering soil non-linearity. A simple power law based on published literature is used where the soil is assumed to be nonlinear-elastic and perfectly plastic. A Tresca yield surface is assumed to develop the soil stiffness variation with different strain levels that defines the non-linearity of the soil strata. The pile displacement response is obtained using the software MATLAB R2019a and the results from the energy-based method are compared with those obtained from the field test data as well as the finite element analysis based on the software ANSYS 2019R3. It is observed that the results obtained from the energy-based method are in better agreement with the field measured values than those obtained from the FEA. The approach presented in this study can be extended to piles embedded in multi-layered soil strata subjected to different cases of lateral loads as well as the combined action of lateral and axial loads. Furthermore, the same approach can be extended to study the response of the soil to group piles.