Mojtaba Ayaz Khoshhava
Mojtaba Ayaz Khoshhava has a total of 8 co-authors. Here are the top co-authors by number of shared publications:
- Hossein Abootorabi Zarchi
Ferdowsi University of Mashhad
6 shared publications - Gholamreza Arab Markadeh
Department of Engineering, Shahrekord University, Shahrekord, Iran
4 shared publications - Hamidreza Mosaddegh Hesar
Department of Electrical Engineering, Faculty of Engineering, Ferdowsi University of Mashhad, Mashhad, Iran
4 shared publications - Xiaodong Liang
University of Saskatchewan
2 shared publications - Amir Khazaee
Department of Electrical and Computer Engineering, Toronto Metropolitan University, Toronto, ON, Canada
1 shared publication - Kamal Al-Haddad
Department of Ecole de Technologie Superieure, University of Quebec, Montreal, QC, Canada
1 shared publication
Latest Publications
- 6 June 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Industrial Electronics
- Vol. 71 (12) , 15509-15520
Intelligent Efficient Control for Brushless Doubly-Fed Induction Machines
In this article, a novel high-efficient control based on brain emotional learning for a brushless doubly-fed induction machine (BDFIM) drive is proposed without requiring a detailed machine model. The step change of the control winding (CW) flux for a given torque and speed is the basis of the proposed controller. The control algorithm detects a steady-state condition by monitoring the speed continuously and then adjusts the CW reference flux’s magnitude to determine the minimum total stator current. The stator current is the sum of the current magnitudes at power and control windings of a BDFIM. This model-free intelligent controller has a simple structure and is independent of the machine parameters and robust to disturbances. The proposed control scheme is assessed by a TMS320F2833 microcontroller synchronized with a personal computer for a 3-kW prototype D132s-BDFIM.
- 6 June 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Industrial Electronics
- Vol. 71 (12) , 15509-15520
Intelligent Efficient Control for Brushless Doubly-Fed Induction Machines
In this article, a novel high-efficient control based on brain emotional learning for a brushless doubly-fed induction machine (BDFIM) drive is proposed without requiring a detailed machine model. The step change of the control winding (CW) flux for a given torque and speed is the basis of the proposed controller. The control algorithm detects a steady-state condition by monitoring the speed continuously and then adjusts the CW reference flux’s magnitude to determine the minimum total stator current. The stator current is the sum of the current magnitudes at power and control windings of a BDFIM. This model-free intelligent controller has a simple structure and is independent of the machine parameters and robust to disturbances. The proposed control scheme is assessed by a TMS320F2833 microcontroller synchronized with a personal computer for a 3-kW prototype D132s-BDFIM.
- 27 July 2023
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Industrial Electronics
- Vol. 71 (6) , 5641-5652
Vector Control of Brushless Doubly-Fed Induction Machines Based on Highly Efficient Nonlinear Controllers
Recent advancement in design and control of brushless doubly-fed induction machine (BDFIM) has substantially improved its performance. In this article, two high efficient vector control schemes are proposed for the BDFIM drive based on Lyapunov nonlinear techniques. The first scheme aims for speed control with a one-level structure without an inner loop controller, and the rotor speed error is delivered to a backstepping speed controller. The second scheme has a two-level structure with a backstepping controller and a model reference controller for torque and speed control, respectively. To enhance the performance, the proposed control schemes are based on a novel maximum torque per Ampere (MTPA) control strategy, and their stability is proven by Lyapunov control theory. The proposed controllers are validated experimentally on a 3-kW prototype D132-BDFIM by a TMS320F2833 microcontroller synchronized with a personal computer, and show superior performance over optimal proportional-integral controllers under changing reference speed and load torque.
- 27 July 2023
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Industrial Electronics
- Vol. 71 (6) , 5641-5652
Vector Control of Brushless Doubly-Fed Induction Machines Based on Highly Efficient Nonlinear Controllers
Recent advancement in design and control of brushless doubly-fed induction machine (BDFIM) has substantially improved its performance. In this article, two high efficient vector control schemes are proposed for the BDFIM drive based on Lyapunov nonlinear techniques. The first scheme aims for speed control with a one-level structure without an inner loop controller, and the rotor speed error is delivered to a backstepping speed controller. The second scheme has a two-level structure with a backstepping controller and a model reference controller for torque and speed control, respectively. To enhance the performance, the proposed control schemes are based on a novel maximum torque per Ampere (MTPA) control strategy, and their stability is proven by Lyapunov control theory. The proposed controllers are validated experimentally on a 3-kW prototype D132-BDFIM by a TMS320F2833 microcontroller synchronized with a personal computer, and show superior performance over optimal proportional-integral controllers under changing reference speed and load torque.
- 28 June 2023
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Industrial Electronics
- Vol. 71 (6) , 5564-5575
A Novel Highly Efficient Torque-Sharing Algorithm for Dual Stator Winding Induction Machines for Various Speed Regions
This paper proposes a novel and highly efficient torque-sharing algorithm for DSWIMs. This algorithm introduces three modes of operation for DSWIMs based on the command speed and the required load power. Implementing this algorithm makes the accurate flux calculation and control possible in very low speed regions, including zero speed. In higher speed regions, if one of the winding sets is able to supply the required power solely, the other is switched off to augment the overall efficiency. In higher required powers, both winding sets cooperate to supply the load torque and the required electromagnetic torque division between the two winding sets is fulfilled based on their power ratings. This guarantees for overloading avoidance in various operation conditions. Moreover, the optimal flux condition is guaranteed in various speed regions free of the torque -sharing. In addition, this algorithm is general and can be implemented in direct torque control and field-oriented control schemes in various reference frames. The proposed algorithm has been experimentally implemented in a 3.3kW vector controlled DSWIM drive system. In this flux and speed control system, the flux is controlled such that a search based Maximum Torque per Ampere (MTPA) algorithm is realized. The proposed MTPA strategy is insensitive to DSWIM parameters and the load variations. The experimental results confirm the functionality of the proposed DSWIM drive system in various operation conditions.
- 28 June 2023
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Industrial Electronics
- Vol. 71 (6) , 5564-5575
A Novel Highly Efficient Torque-Sharing Algorithm for Dual Stator Winding Induction Machines for Various Speed Regions
This paper proposes a novel and highly efficient torque-sharing algorithm for DSWIMs. This algorithm introduces three modes of operation for DSWIMs based on the command speed and the required load power. Implementing this algorithm makes the accurate flux calculation and control possible in very low speed regions, including zero speed. In higher speed regions, if one of the winding sets is able to supply the required power solely, the other is switched off to augment the overall efficiency. In higher required powers, both winding sets cooperate to supply the load torque and the required electromagnetic torque division between the two winding sets is fulfilled based on their power ratings. This guarantees for overloading avoidance in various operation conditions. Moreover, the optimal flux condition is guaranteed in various speed regions free of the torque -sharing. In addition, this algorithm is general and can be implemented in direct torque control and field-oriented control schemes in various reference frames. The proposed algorithm has been experimentally implemented in a 3.3kW vector controlled DSWIM drive system. In this flux and speed control system, the flux is controlled such that a search based Maximum Torque per Ampere (MTPA) algorithm is realized. The proposed MTPA strategy is insensitive to DSWIM parameters and the load variations. The experimental results confirm the functionality of the proposed DSWIM drive system in various operation conditions.
- Open Access
- 15 June 2022
- Published by Institution of Engineering and Technology (IET) in IET Electric Power Applications
- Vol. 16 (10) , 1223-1231
Model‐based online efficiency control of induction motor drives based on nonlinear technique
To accomplish benefits such as high accuracy and fast response, the model‐based loss minimisation algorithms (LMAs) are introduced in the literature, as one of the main available techniques for minimising power losses in electrical motors. They are appropriate for dynamic applications, which necessitate very fast update of the control variable. This study proposes a novel real‐time LMA based on super‐twisting sliding mode controller (SMC) for induction motor (IM) drives, while keeping a good dynamic response. In this regard, a loss minimisation criterion for the efficiency optimisation is proposed and scrutinised. It is shown analytically that LMA will be realised if the nonlinear controller forces this criterion to zero. Moreover, a super‐twisting SMC integrated with the iron loss is proposed which directly regulates both the power loss‐minimising criterion and the electromagnetic torque by choosing those as control outputs. The stability of the super‐twisting SMC is also verified through the Lyapunov's stability principle. The complete closed‐loop control of the proposed LMA‐based IM drive is successfully implemented in real‐time using a digital signal processor board TMS320F28335 for a laboratory 3‐phase IM drive of 2.2 kW. The performance and functionality of the proposed scheme are assessed through experimental results.
- 15 June 2022
- Published by Institution of Engineering and Technology (IET) in IET Electric Power Applications
- Vol. 16 (10) , 1223-1231
Open AccessModel‐based online efficiency control of induction motor drives based on nonlinear technique
To accomplish benefits such as high accuracy and fast response, the model‐based loss minimisation algorithms (LMAs) are introduced in the literature, as one of the main available techniques for minimising power losses in electrical motors. They are appropriate for dynamic applications, which necessitate very fast update of the control variable. This study proposes a novel real‐time LMA based on super‐twisting sliding mode controller (SMC) for induction motor (IM) drives, while keeping a good dynamic response. In this regard, a loss minimisation criterion for the efficiency optimisation is proposed and scrutinised. It is shown analytically that LMA will be realised if the nonlinear controller forces this criterion to zero. Moreover, a super‐twisting SMC integrated with the iron loss is proposed which directly regulates both the power loss‐minimising criterion and the electromagnetic torque by choosing those as control outputs. The stability of the super‐twisting SMC is also verified through the Lyapunov's stability principle. The complete closed‐loop control of the proposed LMA‐based IM drive is successfully implemented in real‐time using a digital signal processor board TMS320F28335 for a laboratory 3‐phase IM drive of 2.2 kW. The performance and functionality of the proposed scheme are assessed through experimental results.
- 5 May 2021
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Energy Conversion
- Vol. 36 (4) , 3231-3240
Sensor-less Speed and Flux Control of Dual Stator Winding Induction Motors Based on Super Twisting Sliding Mode Control
this paper proposes a direct speed and flux control system for Dual Stator Winding Induction Machines (DSWIMs) based on Super Twisting Sliding Mode Control (STSMC). The proposed nonlinear controller is designed such that the Lyapunov stability condition is satisfied. Furthermore, a novel torque-sharing algorithm is introduced for DSWIMs. This algorithm enables them to operate in a wide speed region, including zero speed, such that the required electromagnetic torque is supplied by two winding sets based on their power ratings. In addition, a Sliding Mode Control (SMC) based full order observer is proposed for DSWIMs. This observer, which is able to estimate the winding fluxes, flux angles and rotor speed with high-accuracy, guarantees the optimal flux condition. The functionality of the proposed sensor-less DSWIM drive scheme is evaluated through some experimental tests performed on a 3.3kW DSP-based DSWIM drive system. The experimental results confirm the effectiveness of the proposed control method, torque sharing algorithm and the full order observer in various speed regions.
- 5 May 2021
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Energy Conversion
- Vol. 36 (4) , 3231-3240
Sensor-less Speed and Flux Control of Dual Stator Winding Induction Motors Based on Super Twisting Sliding Mode Control
this paper proposes a direct speed and flux control system for Dual Stator Winding Induction Machines (DSWIMs) based on Super Twisting Sliding Mode Control (STSMC). The proposed nonlinear controller is designed such that the Lyapunov stability condition is satisfied. Furthermore, a novel torque-sharing algorithm is introduced for DSWIMs. This algorithm enables them to operate in a wide speed region, including zero speed, such that the required electromagnetic torque is supplied by two winding sets based on their power ratings. In addition, a Sliding Mode Control (SMC) based full order observer is proposed for DSWIMs. This observer, which is able to estimate the winding fluxes, flux angles and rotor speed with high-accuracy, guarantees the optimal flux condition. The functionality of the proposed sensor-less DSWIM drive scheme is evaluated through some experimental tests performed on a 3.3kW DSP-based DSWIM drive system. The experimental results confirm the effectiveness of the proposed control method, torque sharing algorithm and the full order observer in various speed regions.
- 6 March 2020
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Industrial Electronics
- Vol. 68 (4) , 2931-2941
Iron Loss Modeling in Dual Stator Winding Induction Machines With Unequal Pole Pairs and Squirrel Cage Rotor
this paper pertains to Dual Stator Winding Induction Machines (DSWIMs) modelling and proposes an equivalent electrical circuit for DSWIMs that considers the iron loss effect. It is proved that the iron loss in DSWIMs is comprised of two independent parts resulting from their winding sets. Accordingly, the proposed model is comprised of two distinct parts and it is based on the assumption of independent operation of DSWIM winding sets. This model is valid in dynamic and steady-state operation conditions. The dq0 form of the proposed model is derived in an arbitrary reference frame. In addition, based on this model the iron loss estimation in DSWIMs is presented. The proposed model is simulated in MATLAB/SIMULINK based on the parameters obtained from IEEE standard characterization tests performed on a 3.3kW DSWIM and also some experimental tests are executed via a DSP-based DSWIM drive system. Comparison of the simulation and experimental results confirm the validity of the proposed model both in steady-state and transient conditions. Moreover, this comparison clarifies that the proposed iron loss estimation method can account the iron loss with high accuracy.
- 6 March 2020
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Industrial Electronics
- Vol. 68 (4) , 2931-2941
Iron Loss Modeling in Dual Stator Winding Induction Machines With Unequal Pole Pairs and Squirrel Cage Rotor
this paper pertains to Dual Stator Winding Induction Machines (DSWIMs) modelling and proposes an equivalent electrical circuit for DSWIMs that considers the iron loss effect. It is proved that the iron loss in DSWIMs is comprised of two independent parts resulting from their winding sets. Accordingly, the proposed model is comprised of two distinct parts and it is based on the assumption of independent operation of DSWIM winding sets. This model is valid in dynamic and steady-state operation conditions. The dq0 form of the proposed model is derived in an arbitrary reference frame. In addition, based on this model the iron loss estimation in DSWIMs is presented. The proposed model is simulated in MATLAB/SIMULINK based on the parameters obtained from IEEE standard characterization tests performed on a 3.3kW DSWIM and also some experimental tests are executed via a DSP-based DSWIM drive system. Comparison of the simulation and experimental results confirm the validity of the proposed model both in steady-state and transient conditions. Moreover, this comparison clarifies that the proposed iron loss estimation method can account the iron loss with high accuracy.
- 4 December 2019
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Power Electronics
- Vol. 35 (7) , 6658-6662
Optimal Reference Frame Angle Approach for Air-Gap Flux Minimization in Dual Stator Winding Induction Machines
Dual Stator Winding Induction Machines (DSWIMs) which have two sets of three phase windings with unequal pole pairs in their stator and a standard squirrel cage rotor, have overcame the narrow speed operation region and circulating current problems exists in other types of dual winding machines. These advantages are resulted from the independent operation of their winding sets. The independent operation of winding sets will be guaranteed if the flux saturation is avoided. This paper proposes a novel reference frame angel determination technique which not only guarantees the flux saturation avoidance but also results in flux optimization in DSWIMs. Despite the pervious methods, the proposed method doesn't require position or speed sensor and it is easily applicable in various control schemes and in different reference frames. This method is implemented in a flux and torque vector control system for driving a 3.3kW DSWIM. The experimental results confirm the effectiveness of the proposed method. Moreover, by implementing the proposed method, the torque sharing between two winding sets is properly done according to the power rating of each of them.
- 4 December 2019
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Power Electronics
- Vol. 35 (7) , 6658-6662
Optimal Reference Frame Angle Approach for Air-Gap Flux Minimization in Dual Stator Winding Induction Machines
Dual Stator Winding Induction Machines (DSWIMs) which have two sets of three phase windings with unequal pole pairs in their stator and a standard squirrel cage rotor, have overcame the narrow speed operation region and circulating current problems exists in other types of dual winding machines. These advantages are resulted from the independent operation of their winding sets. The independent operation of winding sets will be guaranteed if the flux saturation is avoided. This paper proposes a novel reference frame angel determination technique which not only guarantees the flux saturation avoidance but also results in flux optimization in DSWIMs. Despite the pervious methods, the proposed method doesn't require position or speed sensor and it is easily applicable in various control schemes and in different reference frames. This method is implemented in a flux and torque vector control system for driving a 3.3kW DSWIM. The experimental results confirm the effectiveness of the proposed method. Moreover, by implementing the proposed method, the torque sharing between two winding sets is properly done according to the power rating of each of them.