Prem Sagar
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Research Interests
Prem Sagar has a total of 22 co-authors. Here are the top co-authors by number of shared publications:
Amit Handa
Department of Mechanical Engineering, I.K. Gujral Punjab Technical University, Kapurthala, India
7 shared publications- Amit Handa
Department of Mechanical Engineering, I.K. Gujral Punjab Technical University, Kapurthala, India
5 shared publications Mukesh Kumar
Department of Mechanical Engineering, The Technological Institute of Textile & Sciences, Bhiwani, Haryana, India
3 shared publicationsShivali Singla
Baba Hira Singh Bhattal Institute of Engineering and Technology, Lehragaga, India
3 shared publicationsSushma Sangwan
Sumit Dhariwal Memorial Group of institutions, Hisar, India
3 shared publicationsA. Handa
Department of Mechanical Engineering I.K. Gujral Punjab Technical University Kapurthala India
2 shared publications
Latest Publications
- 10 February 2026
- Published by SAGE Publications in Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science
- Vol. 240 (9) , 3100-3123
Soft computing-based hybrid heuristic optimization of wear performance in friction stir-processed composites
Soft computing methods are now powerful aids for optimizing the parameters of material processing and improving wear resistance. This research proposes a hybrid heuristic method for optimizing Friction Stir Processing (FSP) parameters for improved wear properties. This research started by examining the key processing parameters of tool rotation speed, traverse speed, and number of passes using a face-centered central composite design (FCCCD) under response surface methodology (RSM).To determine and optimally wear resistance, an integrated computational approach using RSM, Genetic Algorithm (GA), Artificial Neural Networks (ANN), and Adaptive Neuro-Fuzzy Inference System (ANFIS) was used. The GA-ANN model obtained an accuracy of 95.48%, while the GA-ANFIS model yielded an accuracy of 92.9%, confirming that the two models proved to be appropriate predictive models of wear behavior. Microstructural analysis using Field Emission Scanning Electron Microscopy (FESEM) showed that when using the optimized conditions for FSP, the reinforcement particles dispersed uniformly, reduced the formation of wear debris, and improved wear resistance and tribological properties. The morphology of the worn surfaces demonstrated a change from severe delamination and deep plowing for the lower performing surface to a refined abrasive to explain the reduction in material loss and improved performance. Furthermore, three-dimensional response surface plots illustrated the significant role of rotational speed and the number of passes on wear resistance, underlining the importance of parameter selection for superior tribological performance.
- 10 February 2026
- Published by SAGE Publications in Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science
- Vol. 240 (9) , 3100-3123
Soft computing-based hybrid heuristic optimization of wear performance in friction stir-processed composites
Soft computing methods are now powerful aids for optimizing the parameters of material processing and improving wear resistance. This research proposes a hybrid heuristic method for optimizing Friction Stir Processing (FSP) parameters for improved wear properties. This research started by examining the key processing parameters of tool rotation speed, traverse speed, and number of passes using a face-centered central composite design (FCCCD) under response surface methodology (RSM).To determine and optimally wear resistance, an integrated computational approach using RSM, Genetic Algorithm (GA), Artificial Neural Networks (ANN), and Adaptive Neuro-Fuzzy Inference System (ANFIS) was used. The GA-ANN model obtained an accuracy of 95.48%, while the GA-ANFIS model yielded an accuracy of 92.9%, confirming that the two models proved to be appropriate predictive models of wear behavior. Microstructural analysis using Field Emission Scanning Electron Microscopy (FESEM) showed that when using the optimized conditions for FSP, the reinforcement particles dispersed uniformly, reduced the formation of wear debris, and improved wear resistance and tribological properties. The morphology of the worn surfaces demonstrated a change from severe delamination and deep plowing for the lower performing surface to a refined abrasive to explain the reduction in material loss and improved performance. Furthermore, three-dimensional response surface plots illustrated the significant role of rotational speed and the number of passes on wear resistance, underlining the importance of parameter selection for superior tribological performance.
- 19 February 2025
- Published by Taylor & Francis
- p. 70-84
Friction Stir Processing for Surface Modification and Compositing
There has been significant interest in the innovative manufacturing technique known as friction stir processing (FSP) due to its remarkable ability to enhance and customize the surfaces of composite materials. FSP plays a pivotal role in refining the microstructure and improving the mechanical properties of surface composites, which opens up new possibilities in material engineering. This chapter covers the ideas, uses, and developments of FSP for surface modification and compositing in great detail. It provides a comprehensive overview of the entire process, including its mechanism, tools, variables, and operational parameters. Moreover, the chapter highlights several FSP applications across various industries, from aerospace to automotive and beyond. The conclusion of the chapter addresses future trends and challenges in the field of FSP for surface engineering.
- 19 February 2025
- Published by Taylor & Francis
- p. 70-84
Friction Stir Processing for Surface Modification and Compositing
There has been significant interest in the innovative manufacturing technique known as friction stir processing (FSP) due to its remarkable ability to enhance and customize the surfaces of composite materials. FSP plays a pivotal role in refining the microstructure and improving the mechanical properties of surface composites, which opens up new possibilities in material engineering. This chapter covers the ideas, uses, and developments of FSP for surface modification and compositing in great detail. It provides a comprehensive overview of the entire process, including its mechanism, tools, variables, and operational parameters. Moreover, the chapter highlights several FSP applications across various industries, from aerospace to automotive and beyond. The conclusion of the chapter addresses future trends and challenges in the field of FSP for surface engineering.
- 30 June 2024
- Published by IGI Global Scientific Publishing
- p. 180-199
Unveiling the Impact of Processing Parameters on Microstructure and Mechanical Properties of Hybrid Composites Developed via Friction Stir Processing
The combination of two or more different reinforcement materials to produce hybrid composites is gaining significant attention in the field of materials science. These materials have become exceedingly adaptable engineering materials with specific properties for numerous applications. The fabrication process or input parameters have a significant impact on the microstructure and mechanical characteristics of these composites. The complex relationship among the processing parameters and the microstructural and mechanical properties of hybrid composites is thoroughly explored in this chapter. The introductory section clarifies the importance of combining various reinforcements to achieve desired performance characteristics by outlining the basic ideas behind hybrid composites. It also underlines how important processing variables like tool rotation speed, tool transverse speed, tilt angle, and reinforcement concentration are in determining the microstructure characteristics of these novel hybrid materials.
- 30 June 2024
- Published by IGI Global Scientific Publishing
- p. 180-199
Unveiling the Impact of Processing Parameters on Microstructure and Mechanical Properties of Hybrid Composites Developed via Friction Stir Processing
The combination of two or more different reinforcement materials to produce hybrid composites is gaining significant attention in the field of materials science. These materials have become exceedingly adaptable engineering materials with specific properties for numerous applications. The fabrication process or input parameters have a significant impact on the microstructure and mechanical characteristics of these composites. The complex relationship among the processing parameters and the microstructural and mechanical properties of hybrid composites is thoroughly explored in this chapter. The introductory section clarifies the importance of combining various reinforcements to achieve desired performance characteristics by outlining the basic ideas behind hybrid composites. It also underlines how important processing variables like tool rotation speed, tool transverse speed, tilt angle, and reinforcement concentration are in determining the microstructure characteristics of these novel hybrid materials.
- 1 June 2024
- Published by Wiley in Materialwissenschaft und Werkstofftechnik
- Vol. 55 (6) , 758-772
Magnesium‐based nanocomposites developed through multi‐pass friction stir processing and strengthening mechanisms exploration
In the current experimental work, using secondary phase hard nano titanium carbide (TiC) particles as reinforcement, two different magnesium metal matrices i. e., AZ31B/TiC and AZ61 A/TiC composite materials were synthesized by friction stir processing. Using the traditional testing approach for the developed materials, the simultaneous gain in metallurgical, mechanical, electrical, and tribological characteristics compared to the base substrate was examined. The microstructure study results for AZ31B/TiC and AZ61 A/TiC composites showed a uniform distribution of reinforced particles as well as an evolution in grain size, from 82 μm to 4.2 μm and from 74 μm to 3.7 μm, respectively, which consequently contribute in a significant gain in the microhardness of both composites i. e., around 2.2 times and 2.67 times respectively, greater than the base metal. When compared to monolithic alloys, the synthesized AZ31B/TiC and AZ61 A/TiC composites showed improvements in the areas of tensile strength, compressive strength, and coefficient of friction up to 1.81 times, and 1.64 times, 1.74 times and 1.58 times, and 57.92 % and 58.47 %, respectively. Furthermore, these improvements in characteristics also increase the final strengthening of the nanocomposite and reduce electrical conductivity.
- 1 June 2024
- Published by Wiley in Materialwissenschaft und Werkstofftechnik
- Vol. 55 (6) , 758-772
Magnesium‐based nanocomposites developed through multi‐pass friction stir processing and strengthening mechanisms exploration
In the current experimental work, using secondary phase hard nano titanium carbide (TiC) particles as reinforcement, two different magnesium metal matrices i. e., AZ31B/TiC and AZ61 A/TiC composite materials were synthesized by friction stir processing. Using the traditional testing approach for the developed materials, the simultaneous gain in metallurgical, mechanical, electrical, and tribological characteristics compared to the base substrate was examined. The microstructure study results for AZ31B/TiC and AZ61 A/TiC composites showed a uniform distribution of reinforced particles as well as an evolution in grain size, from 82 μm to 4.2 μm and from 74 μm to 3.7 μm, respectively, which consequently contribute in a significant gain in the microhardness of both composites i. e., around 2.2 times and 2.67 times respectively, greater than the base metal. When compared to monolithic alloys, the synthesized AZ31B/TiC and AZ61 A/TiC composites showed improvements in the areas of tensile strength, compressive strength, and coefficient of friction up to 1.81 times, and 1.64 times, 1.74 times and 1.58 times, and 57.92 % and 58.47 %, respectively. Furthermore, these improvements in characteristics also increase the final strengthening of the nanocomposite and reduce electrical conductivity.
- 26 February 2024
- Published by ASME International in Journal of Engineering Materials and Technology
- Vol. 146 (3) , 1-28
Investigation on Mechanical and Fracture Behavior of Magnesium Composite Reinforced With Hybrid Fly Ash Particulates Synthesized via Friction Stir Processing Route
Utilizing waste materials like fly ash in the creation of lightweight magnesium metal matrix composites with a high strength-to-weight ratio is encouraged by the rising demand for in-expensive reinforcements. In the current study, friction stir processing (FSP) was employed to synthesize magnesium surface composites via incorporating hybrid reinforcement particles, including nano titanium carbide and fly ash. The synthesized composite material underwent examination through microscopic images of the stir zone and assessments of microhardness, tensile strength, compressive strength, electrical and thermal conductance, and wear behavior. The results revealed a notable refinement in grain size and a simultaneous improvement in mechanical properties. Notably, there was a substantial increase in wear resistance attributed to the increased hardness and uniform dispersion of hybrid reinforcements within the surface composite. The results demonstrate that the inclusion of reinforcements in magnesium-based alloy led to an enhancement in fracture toughness, mitigation of crack propagation, and an overall improvement in fracture resistance to catastrophic failure.
- 26 February 2024
- Published by ASME International in Journal of Engineering Materials and Technology
- Vol. 146 (3) , 1-28
Investigation on Mechanical and Fracture Behavior of Magnesium Composite Reinforced With Hybrid Fly Ash Particulates Synthesized via Friction Stir Processing Route
Utilizing waste materials like fly ash in the creation of lightweight magnesium metal matrix composites with a high strength-to-weight ratio is encouraged by the rising demand for in-expensive reinforcements. In the current study, friction stir processing (FSP) was employed to synthesize magnesium surface composites via incorporating hybrid reinforcement particles, including nano titanium carbide and fly ash. The synthesized composite material underwent examination through microscopic images of the stir zone and assessments of microhardness, tensile strength, compressive strength, electrical and thermal conductance, and wear behavior. The results revealed a notable refinement in grain size and a simultaneous improvement in mechanical properties. Notably, there was a substantial increase in wear resistance attributed to the increased hardness and uniform dispersion of hybrid reinforcements within the surface composite. The results demonstrate that the inclusion of reinforcements in magnesium-based alloy led to an enhancement in fracture toughness, mitigation of crack propagation, and an overall improvement in fracture resistance to catastrophic failure.
- 21 February 2024
- Published by SAGE Publications in Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science
- Vol. 238 (15) , 7676-7689
Synthesis and characterization of magnesium-titanium carbide nanocomposites via friction stir processing: An in-depth parameter investigation
Magnesium Metal Matrix Composites (MMMCs) possess remarkable mechanical and metallurgical properties that have garnered the interest of researchers worldwide. The current research endeavors to synthesize nanocomposites based on magnesium (Mg), specifically AZ31B, by employing Friction Stir Processing (FSP) and integrating nano-titanium carbide (TiC) as a reinforcing element. Additionally, the impact of various FSP parameters, encompassing transverse speeds (35 and 70 mm/min) and tool rotation speeds (850 and 1700 rpm), on the metallurgical, wear, and mechanical properties of the developed MMMCs was investigated. The microstructural analysis revealed that employing the FSP technique led to a uniform dispersion of nano-TiC reinforcement particles within the base matrix of the AZ31B Mg alloy. This concurrent distribution played a crucial role in both refining and evolving the grain sizes, subsequently leading to improvements in the composites’s mechanical and wear characteristics. To be more specific, the grain size witnessed a reduction by nearly 18 times, the microhardness increased by approximately 2.54 times, and the ultimate tensile strength (UTS) showed a 2.08-fold increase when compared to the base alloy. Furthermore, in contrast to the base material characterized by an adhesive wear mechanism, the presence of scratches indicates that the abrasive wear mechanism predominated in the case of the AZ31B/TiC nanocomposite. The outcome of the results depicts that the nanocomposite fabricated at a tool rotation speed of 1700 rpm and 70 mm/min transverse shows better mechanical and tribological characteristics than other developed composites and the base alloy.
- 21 February 2024
- Published by SAGE Publications in Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science
- Vol. 238 (15) , 7676-7689
Synthesis and characterization of magnesium-titanium carbide nanocomposites via friction stir processing: An in-depth parameter investigation
Magnesium Metal Matrix Composites (MMMCs) possess remarkable mechanical and metallurgical properties that have garnered the interest of researchers worldwide. The current research endeavors to synthesize nanocomposites based on magnesium (Mg), specifically AZ31B, by employing Friction Stir Processing (FSP) and integrating nano-titanium carbide (TiC) as a reinforcing element. Additionally, the impact of various FSP parameters, encompassing transverse speeds (35 and 70 mm/min) and tool rotation speeds (850 and 1700 rpm), on the metallurgical, wear, and mechanical properties of the developed MMMCs was investigated. The microstructural analysis revealed that employing the FSP technique led to a uniform dispersion of nano-TiC reinforcement particles within the base matrix of the AZ31B Mg alloy. This concurrent distribution played a crucial role in both refining and evolving the grain sizes, subsequently leading to improvements in the composites’s mechanical and wear characteristics. To be more specific, the grain size witnessed a reduction by nearly 18 times, the microhardness increased by approximately 2.54 times, and the ultimate tensile strength (UTS) showed a 2.08-fold increase when compared to the base alloy. Furthermore, in contrast to the base material characterized by an adhesive wear mechanism, the presence of scratches indicates that the abrasive wear mechanism predominated in the case of the AZ31B/TiC nanocomposite. The outcome of the results depicts that the nanocomposite fabricated at a tool rotation speed of 1700 rpm and 70 mm/min transverse shows better mechanical and tribological characteristics than other developed composites and the base alloy.
- 4 January 2024
- Published by SAGE Publications in Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering
- Vol. 239 (5) , 2915-2928
Synergistic effect of hybrid reinforcement on magnesium-based composites for enriching mechanical and tribological characteristics
The exceptional mechanical, microstructural, and tribological characteristics of friction stir processed (FSP) hybrid and mono nanocomposite materials resulted in growing research interest. In the presented work, the base matrix of magnesium-based AZ31B alloy was reinforced with fly ash (FA) and nano-titanium carbide (n-TiC) particulates using FSP and resulting in both hybrid and mono composite surfaces. The microstructures and homogeneous distribution of reinforcing particulates of the synthesized composites were investigated with optical microscopy (OM) and field emission scanning electron microscopy (FESEM). In addition, for the synthesized nanocomposites, mechanical and tribological characteristics were investigated including using tensile and compression strength, micro/nano-hardness, and wear characteristics. The OM and FESEM data indicate that owing to the significant impact of the FSP process, grain refinement and the homogenous dispersion of the FA and n-TiC nanoparticles for both mono and hybrid composites were achieved. Overall, the new nano-hybrid composites have better mechanical properties due to improved interfacial bonding and homogeneous dispersion of hybridized n-TiC/FA reinforcements. The results indicate that the AZ31B/FA/TiC hybrid nanocomposite has better mechanical and tribological characteristics than the base alloy and the mono composite materials. More specifically, the grain size was reduced nearly 20 times, microhardness was 1.72 times higher, ultimate tensile strength was 2.42 times higher, compressive strength was 2.57 times higher, and wear rate was, about 80% higher when contrasted to the base alloy. Lastly, it is expected that this composite can offer a remarkable solution for crafting high-performance automotive parts.
- 4 January 2024
- Published by SAGE Publications in Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering
- Vol. 239 (5) , 2915-2928
Synergistic effect of hybrid reinforcement on magnesium-based composites for enriching mechanical and tribological characteristics
The exceptional mechanical, microstructural, and tribological characteristics of friction stir processed (FSP) hybrid and mono nanocomposite materials resulted in growing research interest. In the presented work, the base matrix of magnesium-based AZ31B alloy was reinforced with fly ash (FA) and nano-titanium carbide (n-TiC) particulates using FSP and resulting in both hybrid and mono composite surfaces. The microstructures and homogeneous distribution of reinforcing particulates of the synthesized composites were investigated with optical microscopy (OM) and field emission scanning electron microscopy (FESEM). In addition, for the synthesized nanocomposites, mechanical and tribological characteristics were investigated including using tensile and compression strength, micro/nano-hardness, and wear characteristics. The OM and FESEM data indicate that owing to the significant impact of the FSP process, grain refinement and the homogenous dispersion of the FA and n-TiC nanoparticles for both mono and hybrid composites were achieved. Overall, the new nano-hybrid composites have better mechanical properties due to improved interfacial bonding and homogeneous dispersion of hybridized n-TiC/FA reinforcements. The results indicate that the AZ31B/FA/TiC hybrid nanocomposite has better mechanical and tribological characteristics than the base alloy and the mono composite materials. More specifically, the grain size was reduced nearly 20 times, microhardness was 1.72 times higher, ultimate tensile strength was 2.42 times higher, compressive strength was 2.57 times higher, and wear rate was, about 80% higher when contrasted to the base alloy. Lastly, it is expected that this composite can offer a remarkable solution for crafting high-performance automotive parts.
- 8 December 2023
- Published by Taylor & Francis in Canadian Metallurgical Quarterly
- Vol. 63 (4) , 1150-1168
Enhanced strength ductility and wear resistance in a friction stir processing engineered AZ31B/TiC magnesium-based nanocomposites
- 8 December 2023
- Published by Taylor & Francis in Canadian Metallurgical Quarterly
- Vol. 63 (4) , 1150-1168
Enhanced strength ductility and wear resistance in a friction stir processing engineered AZ31B/TiC magnesium-based nanocomposites