Current Organizations / Institutes

The organizations/institutes from the scholar's latest article

Previous Organizations / Institutes

The organizations / institutes from the scholar's other articles in the past ten years


Germán Omar Barrionuevo has a total of 84 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Additive Manufacturing of Inorganic Smart Materials

    by Carolina Guerra, Iván La Fé-Perdomo, Jorge A. Ramos-Grez, Germán Omar Barrionuevo

    Additive manufacturing (AM) has emerged as a disruptive technology with the capacity to reshape conventional design and production strategies across multiple industries. Beyond the advantages of geometric freedom, rapid prototyping, and waste minimization, AM offers a unique opportunity to integrate emerging classes of materials with advanced functionalities. Among these, inorganic smart materials, often referred to as programmable or “4D materials” due to their ability to respond dynamically to external stimuli, have attracted increasing attention. These materials, including shape-memory alloys (SMAs), piezoelectric ceramics, magnetostrictive alloys, chromogenic compounds, photoactive oxides, and self-healing composites, exhibit remarkable properties such as shape recovery, energy conversion, optical modulation, and autonomous repair. This chapter examines the physical fundamentals governing these inorganic smart materials, their conventional fabrication routes, and the progress achieved in adapting them for AM technologies. Emphasis is placed on the opportunities that AM provides to tailor microstructures, manage texture, and multifunctionality in ways that are not accessible through traditional manufacturing. At the same time, key challenges such as high-energy requirements, the brittleness of ceramics, porosity control, the scalability of nanostructures, and the stability of functional responses are identified and discussed. By comparing the state-of-the-art in metals and ceramics AM processes, this book chapter highlights how layer-by-layer approaches could accelerate the deployment of smart materials in applications ranging from biomedical devices and aerospace actuators to energy-harvesting systems and intelligent infrastructure. Looking forward, the convergence of precise energy delivery, advanced feedstock design, and multimaterial integration will be critical to fully unlock the potential of 4D AM. Ultimately, the successful adoption of inorganic smart materials in AM will bridge the gap between structural performance and responsive functionality, enabling the fabrication of next-generation devices with unprecedented adaptability and efficiency.

  • Open Access

    Heat Treatment Effects on Additively Manufactured Polymer Matrix Composites

    by Germán Omar Barrionuevo, Felipe Fernández, Yuvaraj Ravishankar Chappidi, Jorge Ramos-Grez, Wilson Navas-Pinto, Jonathan D. Reyes-Ortiz, Duncan E. Cree

    Additive manufacturing (AM) of polymer matrix composites (PMCs) enables the fabrication of complex, structurally efficient parts, but the layer-wise thermal history intrinsic to processes such as material extrusion, vat photopolymerization, powder bed fusion, and direct ink writing leaves as-printed components in a metastable state: sub-equilibrium crystallinity or incomplete cure, interlayer porosity, weak interlaminar bonding, and locked-in residual stress. Post-fabrication heat treatments have positioned themselves as an attractive and straightforward strategy to address these deficiencies; however, the reported outcomes vary widely across material systems and treatment protocols. This review consolidates and analyzes the existing literature on heat treatment effects in AM-PMCs by organizing the different reported strategies into a taxonomy encompassing free and constrained annealing, pressure-assisted consolidation (including hot isostatic pressing and hot pressing), and post-curing processes for thermoset and photopolymers. The comprehensive literature review allowed identification of four coupled microstructural mechanisms, which govern the resulting property changes after the heat treatment: crystallization, interlayer/interface healing, porosity evolution, and residual stress relaxation. Post-treatment mechanical testing revealed that interlaminar shear strength exhibits the largest and most consistent improvement, while tensile and flexural performance respond differently depending on material systems and treatment conditions. Thermal and dimensional results are shown to be mechanistically coupled between heat deflection maximization temperature and shrinkage or warping minimization. Reinforcement type and matrix chemistry play a substantial role in modulating the treatment response, as continuous-fiber and carbon-fiber systems generally benefit most from pressure-assisted treatment. The present review concludes by identifying persistent gaps in protocol standardization, interlaminar or fatigue characterization, and reinforcement-treatment coupling studies, while outlining directions, including in situ consolidation and data-driven process-property modeling for future work.


  • Open Access

    Influence of Low TiO2 Nanoparticle Loading on Electrospun sPEEK Fiber Morphology and Chemistry and on the Tensile Properties of Corresponding Solution-Cast Membranes

    by Dayana Llumiquinga, Luis Criollo, Wilson Navas-Pinto, Germán Omar Barrionuevo, Jhon Luna-Jaén, Xavier Sánchez-Sánchez, Santiago D. Puma-Araujo

    Polymer matrix composites (PMCs) have garnered importance due to their unique combination of mechanical, thermal, and functional properties. However, their performance depends on overcoming challenges related to dispersion, bonding, and processing. Electrospinning is an advanced technique for producing nanofiber or microfiber PMCs. One of the key challenges in electrospun PMCs is the uniform dispersion of reinforcement materials like TiO2 nanoparticles within the polymer matrix. A Taguchi orthogonal design (L16) was used to evaluate the effects of needle-to-collector distance, applied voltage, and flow rate on mean fiber diameter and deposition quality. Scanning electron microscopy (SEM) and Fourier-transform infrared spectroscopy (FT-IR) were used to characterize electrospun neat sulfonated poly(ether ether ketone) (sPEEK) and sPEEK/TiO2 fibers, whereas tensile tests were performed on solution-cast membranes prepared from the corresponding formulations. The lowest observed run mean diameter was 204.6695 nm at 8 kV, 1.25 mL h−1, and a needle-to-collector distance of 12 cm; this run was also selected for deposition quality. Neat sPEEK membranes exhibited a mean tensile strength of 35.3 MPa, a mean apparent tensile modulus of 476 MPa, and a mean elongation at fracture of 18%. Among the TiO2-containing formulations, increasing the TiO2 content from 0.04 to 0.10 wt.% was associated with higher mean apparent tensile modulus and tensile strength and lower mean elongation at fracture. The 0.10 wt.% formulation exhibited the highest mean apparent tensile modulus and tensile strength.

  • Open Access

    Ballistic performance of UHMWPE-based laminated composites reinforced with Ti–6Al–4V alloy sheets

    by Marcel P. Zylberberg, José R.M. D’ALmeida, Germán Omar Barrionuevo, Wilson Navas-Pinto, Sérgio N. Monteiro

  • Open Access

    Welding-based algebraic models to predict microstructure features in laser powder bed fusion

    by Germán Omar Barrionuevo, Patricio Mendez, Jorge Ramos-Grez, Iván La Fé-Perdomo

    Metal additive manufacturing has matured to the point where it is used ubiquitously in all types of industries, not only as a rapid prototyping technology, but also as a complement to and even a potentially superior manufacturing method compared to conventional processes. For industries that require high precision and process control, laser powder bed fusion (LPBF) is the preferred technology for processing advanced alloys. Researchers have developed complex models to predict material behavior during laser–material interaction with high accuracy. However, these models are difficult to implement and often require specific software. Therefore, this study evaluates the applicability of algebraic models used in welding to predict variables of interest in LPBF in a simple yet effective manner. The models used are based on the fundamental equations governing heat transfer in solids. The predicted quantities include melt-pool dimensions, sub-grain microstructure, and solidification time. The models show high accuracy in predicting microstructural features in the processing of 316L stainless steel manufactured using LPBF. The scanning speed is confirmed as a dominant control parameter governing both melt-pool geometry and microstructural features. Incorporating remelting and multi-layer effects improves analytical models beyond single-track assumptions, providing a more realistic representation of LPBF thermal behavior and capturing the cyclic nature of layer-by-layer construction.

  • Open Access

    Machine Learning Approach for Mechanical Property Prediction of a Bio-Epoxy and Glass Fiber Composite Reinforced with Titanium Dioxide Nanoparticles

    by Wilson Navas-Pinto, Pablo Díaz-Leime, Germán Omar Barrionuevo, Jhon Luna-Jaén, Xavier Sánchez-Sánchez, Carlos Navas-Cárdenas, Duncan E. Cree

    Glass fiber reinforced polymers (GFRPs) have drawn significant attention given their lightweight, mechanical resistance and tunable properties through constituent selection. Due to environmental concerns, research efforts have focused on incorporating sustainable materials, such as bio-epoxy resins, to reduce the ecological impact of GFRPs. This study characterizes a GFRP containing a bio-epoxy resin matrix, various loadings of titanium dioxide (TiO2) nanoparticles, and a stabilized arrangement of glass fiber. The unreinforced composite exhibited a tensile strength and modulus of 214 MPa, and 13 GPa, respectively, and a flexural strength and modulus of 375 MPa and 14.5 GPa, respectively. The addition of TiO2 produced an improvement in mechanical response for all the composites. The formulation with 1 wt.% TiO2 showed the best tensile response with an improvement of 13% and 14% for its tensile strength, and modulus, respectively; meanwhile, the composites with 2 wt.% TiO2 attained an improvement of 19% and 40% for the flexural strength and modulus, respectively. Scanning electron microscopy (SEM) revealed significant changes in the fracture mechanism of the composites, while energy-dispersive spectroscopy (EDS) confirmed an even nanoparticle distribution. Additionally, machine learning (ML) models were developed to predict the mechanical response as a function of the TiO2 content.


  • Open Access

    Statistical Evaluation of the Mechanical Properties of Welded and Unwelded ASTM A706 Reinforcing Steel Bars of Different Commercial Brands

    by Lenin Abatta-Jacome, Daniel Rosero-Pazmiño, Jeison Rosero-Vivas, Bryan Fernando Chávez-Guerrero, Germán Omar Barrionuevo

    The future of reinforcing steel bars (rebar) is being shaped by technological advancements, sustainability initiatives, and evolving construction practices. Welding of rebar has a significant and evolving influence on construction practices, particularly with trends emphasizing speed, precision, and prefabrication. On the other hand, the variability in mechanical response depends not only on the chemical composition but also on the manufacturing and welding process. This study analyzed five commercial brands of ASTM A706 reinforcing steel rods available in the Ecuadorian market with different diameters (12, 14, 16, and 18 mm) subjected to tensile and bending tests. A total of 228 specimens were analyzed, and 114 samples were welded by shielded metal arc welding process using an E8018-C3 electrode, preparing the joint with a simple V-bevel at 45°. The tensile tests results allow for a comparison between the welded and unwelded steel bars, where it is identified that the welding process generates a slight decrease in the mechanical properties and increases the variability in the results, although it is emphasized that these variations do not affect compliance with the standards, since all the samples meet the mechanical strength requirements by being within the limits established by the ASTM A706/A706M standard.

  • Mechanical response of bio-epoxy resin composites reinforced with graphene oxide: machine learning approach for property prediction

    by Wilson Navas-Pinto, Duncan E Cree, Lee D Wilson, Germán Omar Barrionuevo, Xavier Sánchez-Sánchez

    Polymer matrix composites have become one of the most developed materials due to the possibility of tailored mechanical, physical, or thermal properties. However, important environmental concerns have arisen within conventional thermoset polymers due to the depletion of the non-renewable resources used in their production. For this reason, bio-epoxy resins have been developed by replacing a fraction of the petroleum-based components with renewable materials. In addition, machine learning algorithms have become a powerful tool to estimate material properties in nanocomposites, which might be further corroborated by experimental means. Therefore, this study developed a composite material with a bio-epoxy resin matrix reinforced with graphene oxide (GO). Experimental and theoretical densities revealed a linear relationship between the GO loading and the pore volume fraction of the composites. An estimation of various mechanical properties is listed for a bio-epoxy resin: ultimate tensile strength (UTS) (63.4 MPa), modulus of elasticity (2.74 GPa), flexural strength (95.32 MPa), and flexural modulus of elasticity (2.52 GPa). Composites including 0.1, 0.3, and 0.5 wt. % showed an improvement in the aforementioned properties, while the composites, including 0.8 and 1.2 wt. % exhibit a decrease in the overall mechanical response. Evaluation of tensile and flexural fracture surfaces revealed a noticeable strengthening mechanism in the composites after the addition of the reinforcement. Differential scanning calorimetry results demonstrated increased glass transition temperature as the GO filler loading increased. Machine learning allows the prediction of the UTS as a function of GO content with high accuracy.


  • Open Access

    Characterization of graphene oxide synthesized through a modified Hummers method

    by Wilson Navas-Pinto, Duncan E. Cree, Lee D. Wilson, Germán Omar Barrionuevo, Xavier Sánchez-Sánchez, Héctor Calvopiña

    Graphene oxide (GO) has garnered significant interest due to its exceptional and tunable properties, which make it a promising candidate for a wide range of engineering applications, including composite material fabrication and water treatment. In this study, GO was synthesized from graphite flakes using a modified Hummers method involving a reduced amount of sulfuric acid. The resulting material was characterized using scanning electron microscopy (SEM), Fourier transform infrared spectroscopy (FTIR), and X-ray photoelectron spectroscopy (XPS). These techniques enabled a clear differentiation between the morphology of the synthesized GO and that of the original graphite. The GO exhibited a substantially altered structure, with increased thickness likely due to the incorporation of oxygen-containing functional groups on its basal plane. FTIR analysis confirmed the presence of characteristic functional groups such as hydroxyl, carbonyl, and carboxyl. XPS analysis revealed that the elemental composition of the synthesized GO consisted of approximately 69.7% carbon and 29.9% oxygen, with a trace amount of sulfur attributed to the reagents used in the synthesis. The observed changes in morphology and composition suggest the successful synthesis of GO with potential for functionalization and application in diverse engineering contexts.


  • Open Access

    Predicting the Relative Density of Stainless Steel and Aluminum Alloys Manufactured by L-PBF Using Machine Learning

    by José Luis Mullo, Iván La Fé-Perdomo, Jorge Ramos-Grez, Ángel F. Moreira Romero, Alejandra Ramírez-Albán, Mélany Yarad-Jácome, Germán Omar Barrionuevo

    Metal additive manufacturing is a disruptive technology that is changing how various alloys are processed. Although this technology has several advantages over conventional manufacturing, it is still necessary to standardize its properties, which are dependent on the relative density (RD). In addition, since experimental designs are costly, one solution is using machine learning algorithms that allow the effects of variations in the processing parameters on the resulting density of the additively manufactured components to be anticipated. This work assembled a database based on data from 673 observations and 10 predictors to forecast the relative density of 316L stainless steel and AlSi10Mg components produced by laser powder bed fusion (L-PBF). LazyPredict was employed to select the algorithm that best models the variability of the inherent data. Ensemble boosting regressors offer higher accuracy, providing hyperparameter fitting and optimization advantages. The predictions’ precision for aluminum and stainless steel obtained an R2 value greater than 0.86 and 0.83, respectively. The results of the SHAP values indicated that laser power and energy density are the parameters that have the greatest impact on the predictability of the relative density of Al-Si10-Mg and SS 316L materials processed by L-PBF. This study presents a compendium of data for the additive fabrication of stainless steel and aluminum alloys, offering researchers a guide to understanding how processing parameters influence RD.