Influence of Low TiO2 Nanoparticle Loading on Electrospun sPEEK Fiber Morphology and Chemistry and on the Tensile Properties of Corresponding Solution-Cast Membranes
Open Access
Abstract
Polymer matrix composites (PMCs) have garnered importance due to their unique combination of mechanical, thermal, and functional properties. However, their performance depends on overcoming challenges related to dispersion, bonding, and processing. Electrospinning is an advanced technique for producing nanofiber or microfiber PMCs. One of the key challenges in electrospun PMCs is the uniform dispersion of reinforcement materials like nanoparticles within the polymer matrix. A Taguchi orthogonal design () was used to evaluate the effects of needle-to-collector distance, applied voltage, and flow rate on mean fiber diameter and deposition quality. Scanning electron microscopy (SEM) and Fourier-transform infrared spectroscopy (FT-IR) were used to characterize electrospun neat sulfonated poly(ether ether ketone) (sPEEK) and sPEEK/TiO2 fibers, whereas tensile tests were performed on solution-cast membranes prepared from the corresponding formulations. The lowest observed run mean diameter was 204.6695 nm at 8 kV, 1.25 mL h−1, and a needle-to-collector distance of 12 cm; this run was also selected for deposition quality. Neat sPEEK membranes exhibited a mean tensile strength of 35.3 MPa, a mean apparent tensile modulus of 476 MPa, and a mean elongation at fracture of 18%. Among the TiO2-containing formulations, increasing the TiO2 content from 0.04 to 0.10 wt.% was associated with higher mean apparent tensile modulus and tensile strength and lower mean elongation at fracture. The 0.10 wt.% formulation exhibited the highest mean apparent tensile modulus and tensile strength.
Keywords
Funding Information
- Universidad de las Fuerzas Armadas ESPE (ESPE-CA-RES-2022-019/ECMEMC)
This publication has 66 references indexed in Scilit:
- Effect of hybrid carbon nanofillers at percolation on electrical and mechanical properties of glass fiber reinforced epoxyJournal of Applied Polymer Science, 2022
- How Nanofibers Carry the Load: Toward a Universal and Reliable Approach for Tensile Testing of Polymeric Nanofibrous MembranesMacromolecular Materials and Engineering, 2021
- Mechanical Properties of Electrospun Fibers—A Critical ReviewAdvanced Engineering Materials, 2021
- Hydrophilic TiO2 decorated carbon nanotubes/sulfonated poly(ether ether ketone) composite proton exchange membranes for fuel cellsPolymer Engineering & Science, 2020
- Nano oxides incorporated sulfonated poly(ether ether ketone) membranes with improved selectivity and stability for vanadium redox flow batteryJournal of Solid State Electrochemistry, 2016
- Novel sulfonated poly (ether ether ketone)/silica coated carbon nanotubes high‐performance composite membranes for direct methanol fuel cellPolymers for Advanced Technologies, 2015
- Using an additive to control the electrospinning of fibres of poly(ε‐caprolactone)Polymer International, 2010
- Mechanical behavior of electrospun fiber mats of poly(vinyl chloride)/polyurethane polyblendsJournal of Polymer Science Part B: Polymer Physics, 2003
- Sulfonation of poly(ether ether ketone)(PEEK): Kinetic study and characterizationJournal of Applied Polymer Science, 2001
- Electrostatic fiber spinning from polymer melts. I. Experimental observations on fiber formation and propertiesJournal of Polymer Science: Polymer Physics Edition, 1981