Thayset Mariño Peacok

This study introduces a novel, non-invasive X-ray absorption analysis (XRA) method to evaluate the photonic absorption process of granular activated carbon (GAC) in hospital water purification systems. By leveraging digital radiographic images, this innovative technique monitors the deterioration and oxidation of the GAC filter, predicts its remaining lifetime, and estimates its water dechlorinating capacity. Analyzing the entire GAC filter and making a reuse possible, the new XRA method provides valuable insights into the filter’s condition, enhancing water purification efficiency and costs without analyzing subsamples. Complementary analytical techniques on subsamples, taken at various depths, did not yield valuable additional information of the GAC filter exhaustion condition, nor additionally make a reuse impossible.

The chemical regeneration of exhausted granular activated carbon (GAC) from a water treatment plant to produce dialysis water used in hemodialysis treatments for chronic renal disease patients from a general Hospital of Ciego de Avila province, Cuba, was investigated. Activated carbon (AC) exhausted mainly by inorganics (Ca (Ca-chelates), Mg and Na) was regenerated using hydrochloric acid and acetic acid (one regeneration cycle). Solutions of 5%, 10%, 15% and 20%(v/v) as well as four contact times (2 h, 4 h, 6 h and 48 h) for hydrochloric acid and three contact times (2 h, 4 h and 6 h) for acetic acid at 25°C and 1 atm in a dosage of 1 g GAC/10 mL were used. Inductively Coupled Plasma-Atomic Emission Spectroscopy (ICP-AES), thermogravimetric analysis (TGA), X-ray absorption technique (XRA) and Scanning Electronic Microscopy (SEM) were used to evaluate the effect of the regeneration on exhausted GAC. Batch and scaled column experiments were developed. Breakthrough curves were obtained to assess the AC’s performances after chemical regeneration. The removal/adsorption capacity towards free chlorine (as disinfection agent) and hardness ions (expressed in mg CaCO3/L) was estimated using the area under the breakthrough curves from scaled columns experiments. The hydrochloric acid arises as the best acidic regenerator; using a concentration of 20%(v/v), regenerated GACs using hydrochloric acid showed the highest desorption rate of inorganics as well as a free chlorine removal performance of around 30% concerning the virgin GAC sample. A new GAC management scheme is proposed for GACs used in the medical industry to improve the sustainability and economics of the water treatment process.

A mathematical tool has been developed to evaluate the economic advantages of in-situ chemical regeneration of fixed-bed industrial adsorbers of granular activated carbon for cooling water treatment systems in Cuban power plants. Two scenarios of activated carbon (AC) management in a power plant were compared by applying the proposed model. The economic profit by implementing the regeneration strategy as a function of the number of regeneration cycles was determined and optimized. Breakthrough curves were obtained to assess the adsorption performance of the AC after progressive saturation–chemical regeneration cycles using synthetic water and hydrochloric acid, respectively. For the first saturation cycle, the breakthrough time was 272 min and after 10 cycles, it was reduced to 58 min, indicating a decrease of the adsorption capacity of 21%. The AC adsorption performance in terms of saturation time as a function of the number of regeneration cycles was considered one of the tool parameters. The proposed tool allows to determine the optimal number of regeneration cycles for a maximum economic profit in the regeneration strategy. It was demonstrated, using the proposed tool, that after an optimum of seven regeneration cycles, the power plant expends only 26% of the total investment. The simplicity of the tool permits a rapid way to find the most profitable number of regeneration cycles by combining economic, technical and adsorption efficiency parameters in one function, thus improving the AC management strategy at an industrial scale with corresponding environmental and economic advantages, including sustainability.