Sheng Chen
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Sheng Chen has a total of 11 co-authors. Here are the top co-authors by number of shared publications:
- Yongbo Zhao
Xidian University
10 shared publications Xiaojiao Pang
National Laboratory of Radar Signal Processing, Xidian University, Xi’an, China
5 shared publicationsYili Hu
National Laboratory of Radar Signal Processing, Xidian University, Xi’an, China
3 shared publications- Yili Hu
National Lab of Radar Signal Processing, Xidian University, Xi’an 710071, China
3 shared publications - Yili Hu
National Laboratory of Radar Signal Processing, Xidian University, Xi’an 710071, China
2 shared publications - Ben Niu
National Key Laboratory of Radar Signal Processing, Xidian University, Xi’an 710071, China
1 shared publication
Latest Publications
- 1 June 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE) in Journal of Systems Engineering and Electronics
- Vol. 35 (3) , 589-598
Beamspace Maximum Likelihood Algorithm Based on Sum and Difference Beams for Elevation Estimation
Beamspace super-resolution methods for elevation estimation in multipath environment has attracted significant attention, especially the beamspace maximum likelihood (BML) algorithm. However, the difference beam is rarely used in super-resolution methods, especially in low elevation estimation. The target airspace information in the difference beam is different from the target airspace information in the sum beam. And the use of difference beams does not significantly increase the complexity of the system and algorithms. Thus, this paper applies the difference beam to the beamformer to improve the elevation estimation performance of BML algorithm. And the direction and number of beams can be adjusted according to the actual needs. The theoretical target elevation angle root means square error (RMSE) and the computational complexity of the proposed algorithms are analyzed. Finally, computer simulations and real data processing results demonstrate the effectiveness of the proposed algorithms.
- 1 June 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE) in Journal of Systems Engineering and Electronics
- Vol. 35 (3) , 589-598
Beamspace Maximum Likelihood Algorithm Based on Sum and Difference Beams for Elevation Estimation
Beamspace super-resolution methods for elevation estimation in multipath environment has attracted significant attention, especially the beamspace maximum likelihood (BML) algorithm. However, the difference beam is rarely used in super-resolution methods, especially in low elevation estimation. The target airspace information in the difference beam is different from the target airspace information in the sum beam. And the use of difference beams does not significantly increase the complexity of the system and algorithms. Thus, this paper applies the difference beam to the beamformer to improve the elevation estimation performance of BML algorithm. And the direction and number of beams can be adjusted according to the actual needs. The theoretical target elevation angle root means square error (RMSE) and the computational complexity of the proposed algorithms are analyzed. Finally, computer simulations and real data processing results demonstrate the effectiveness of the proposed algorithms.
- Open Access
- 15 November 2022
- Published by MDPI AG in Remote Sensing
- Vol. 14 (22) , 5761
BoxPaste: An Effective Data Augmentation Method for SAR Ship Detection
Data augmentation is a crucial technique for convolutional neural network (CNN)-based object detection. Thus, this work proposes BoxPaste, a simple but powerful data augmentation method appropriate for ship detection in Synthetic Aperture Radar (SAR) imagery. BoxPaste crops ship objects from one SAR image using bounding box annotations and pastes them on another SAR image to artificially increase the object density in each training image. Furthermore, we dive deep into the characteristics of the SAR ship detection task and draw a principle for designing a SAR ship detector—light models may perform better. Our proposed data augmentation method and modified ship detector attain a 95.5% Average Precision (AP) and 96.6% recall on the SAR Ship Detection Dataset (SSDD), 4.7% and 5.5% higher than the fully convolutional one-stage (FCOS) object detection baseline method. Furthermore, we also combine our data augmentation scheme with two current detectors, RetinaNet and adaptive training sample selection (ATSS), to validate its effectiveness. The experimental results demonstrate that our newly proposed SAR-ATSS architecture achieves 96.3% AP, employing ResNet-50 as the backbone. The experimental results show that the method can significantly improve detection performance.
- 15 November 2022
- Published by MDPI AG in Remote Sensing
- Vol. 14 (22) , 5761
Open AccessBoxPaste: An Effective Data Augmentation Method for SAR Ship Detection
Data augmentation is a crucial technique for convolutional neural network (CNN)-based object detection. Thus, this work proposes BoxPaste, a simple but powerful data augmentation method appropriate for ship detection in Synthetic Aperture Radar (SAR) imagery. BoxPaste crops ship objects from one SAR image using bounding box annotations and pastes them on another SAR image to artificially increase the object density in each training image. Furthermore, we dive deep into the characteristics of the SAR ship detection task and draw a principle for designing a SAR ship detector—light models may perform better. Our proposed data augmentation method and modified ship detector attain a 95.5% Average Precision (AP) and 96.6% recall on the SAR Ship Detection Dataset (SSDD), 4.7% and 5.5% higher than the fully convolutional one-stage (FCOS) object detection baseline method. Furthermore, we also combine our data augmentation scheme with two current detectors, RetinaNet and adaptive training sample selection (ATSS), to validate its effectiveness. The experimental results demonstrate that our newly proposed SAR-ATSS architecture achieves 96.3% AP, employing ResNet-50 as the backbone. The experimental results show that the method can significantly improve detection performance.
- 29 April 2022
- Published by Zhejiang University Press in Frontiers of Information Technology & Electronic Engineering
- Vol. 23 (6) , 937-949
Target height and multipath attenuation joint estimation with complex scenarios for very high frequency radar
Low-angle estimation for very high frequency (VHF) radar is a difficult problem due to the multipath effect in the radar field, especially in complex scena
- 29 April 2022
- Published by Zhejiang University Press in Frontiers of Information Technology & Electronic Engineering
- Vol. 23 (6) , 937-949
Target height and multipath attenuation joint estimation with complex scenarios for very high frequency radar
Low-angle estimation for very high frequency (VHF) radar is a difficult problem due to the multipath effect in the radar field, especially in complex scena
- Open Access
- 15 April 2022
- Published by MDPI AG in Remote Sensing
- Vol. 14 (8) , 1917
Beamspace Scene Classification Algorithm for Low-Angle Estimation in MIMO Radar
This paper discusses the issue of low-angle estimation in multiple-input, multiple-output (MIMO) radar. Due to the low amount of data transmission, storage, and computation required for beamspace super-resolution algorithms in low-angle estimation, the method has gained considerable interest in recent years. This paper develops a beamspace scene classification (BSC) algorithm to enhance the performance of low-angle estimation in MIMO radar. The proposed BSC algorithm solves an initial angle estimate and the multipath coefficient estimate using the 3D beamspace data, and further constructs the beamspace data required for transmitting and receiving sides to reduce the data dimensions. It is additionally used to provide three estimation schemes with closed-form solutions for three multipath scenes (obtaining two estimations for transmitting and receiving sides). Finally, it fuses the estimates of the two sides by the minimum variance criterion. As a result, the proposed method achieves high estimation accuracy while requiring few processing resources. Moreover, the computational complexity of the proposed algorithm is examined in this study, with the results demonstrating that the proposed method is superior for engineering applications.
- 15 April 2022
- Published by MDPI AG in Remote Sensing
- Vol. 14 (8) , 1917
Open AccessBeamspace Scene Classification Algorithm for Low-Angle Estimation in MIMO Radar
This paper discusses the issue of low-angle estimation in multiple-input, multiple-output (MIMO) radar. Due to the low amount of data transmission, storage, and computation required for beamspace super-resolution algorithms in low-angle estimation, the method has gained considerable interest in recent years. This paper develops a beamspace scene classification (BSC) algorithm to enhance the performance of low-angle estimation in MIMO radar. The proposed BSC algorithm solves an initial angle estimate and the multipath coefficient estimate using the 3D beamspace data, and further constructs the beamspace data required for transmitting and receiving sides to reduce the data dimensions. It is additionally used to provide three estimation schemes with closed-form solutions for three multipath scenes (obtaining two estimations for transmitting and receiving sides). Finally, it fuses the estimates of the two sides by the minimum variance criterion. As a result, the proposed method achieves high estimation accuracy while requiring few processing resources. Moreover, the computational complexity of the proposed algorithm is examined in this study, with the results demonstrating that the proposed method is superior for engineering applications.
- 1 April 2022
- Published by Elsevier in Digital Signal Processing
- Vol. 122
A beamspace maximum likelihood algorithm for target height estimation for a bistatic MIMO radar
- 1 April 2022
- Published by Elsevier in Digital Signal Processing
- Vol. 122
A beamspace maximum likelihood algorithm for target height estimation for a bistatic MIMO radar
- 25 February 2022
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Signal Processing Letters
- Vol. 29 (10709908) , 742-746
Beamspace Phase Solving Algorithm for Elevation Angle Estimation
This letter discusses the elevation angle estimation problem for a scene containing a direct and a reflected signal. Beamspace processing is an excellent candidate to reduce the computational burden of elevation angle estimation without affecting the multipath phase that contains the reflection coefficient phase and the phase difference between the direct and the reflected signals. In addition, the multipath phase is a function of the target elevation angle. With these considerations, we solve the multipath phase problem without searching within 3D beamspace data and therefore obtain the target elevation angle with a very low computational burden. Under the same prior information, the proposed algorithm manages an estimation accuracy similar to the ones requiring a search under the condition of a certain signal-to-noise ratio. Our evaluation results demonstrate the suitability of the proposed algorithm for engineering applications.
- 25 February 2022
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Signal Processing Letters
- Vol. 29 (10709908) , 742-746
Beamspace Phase Solving Algorithm for Elevation Angle Estimation
This letter discusses the elevation angle estimation problem for a scene containing a direct and a reflected signal. Beamspace processing is an excellent candidate to reduce the computational burden of elevation angle estimation without affecting the multipath phase that contains the reflection coefficient phase and the phase difference between the direct and the reflected signals. In addition, the multipath phase is a function of the target elevation angle. With these considerations, we solve the multipath phase problem without searching within 3D beamspace data and therefore obtain the target elevation angle with a very low computational burden. Under the same prior information, the proposed algorithm manages an estimation accuracy similar to the ones requiring a search under the condition of a certain signal-to-noise ratio. Our evaluation results demonstrate the suitability of the proposed algorithm for engineering applications.
- Open Access
- 15 December 2021
- Published by Hindawi Limited in International Journal of Antennas and Propagation
- Vol. 2021, 1-10
Incoherent Integration Detection Method of Airborne Phased Array Radar in a Multipath Environment
Airborne phased array radar (PAR) suffers from multipath problems when flying over a calm sea surface. The existence of a multipath phenomenon will cause the electromagnetic echo of the same target to be reflected back to the airborne PAR from two paths, namely, direct path (DP) and multipath. Compared with the ground-based radar, the target echo received by airborne PAR in the multipath environment has two important characteristics: one is that the DP signal and the multipath signal exist in different range bins, and the other is that the radar cross section (RCS) in the DP direction may be smaller than that in the multipath direction. Considering these two characteristics, this paper first proposes a target pairing algorithm for matching the DP range and multipath range of the same target in signal detection, and then, combined with the cell-averaging constant false alarm rate (CA-CFAR) detection model, an incoherent integration detection method for airborne PAR in the multipath environment is proposed. In the target pairing process, the geometric structure relationship of the airborne PAR model can be fully utilized. After a successful target pairing process, the energy of the multipath signal will be incoherently accumulated into the corresponding DP range bin, so as to improve the probability of DP range bin data passing the detection threshold. In essence, the proposed method makes full use of multipath energy to improve the detection capability of airborne PAR in the multipath environment. Finally, the detection probability of the proposed method is given, and the detection performance is analyzed.
- 15 December 2021
- Published by Hindawi Limited in International Journal of Antennas and Propagation
- Vol. 2021, 1-10
Open AccessIncoherent Integration Detection Method of Airborne Phased Array Radar in a Multipath Environment
Airborne phased array radar (PAR) suffers from multipath problems when flying over a calm sea surface. The existence of a multipath phenomenon will cause the electromagnetic echo of the same target to be reflected back to the airborne PAR from two paths, namely, direct path (DP) and multipath. Compared with the ground-based radar, the target echo received by airborne PAR in the multipath environment has two important characteristics: one is that the DP signal and the multipath signal exist in different range bins, and the other is that the radar cross section (RCS) in the DP direction may be smaller than that in the multipath direction. Considering these two characteristics, this paper first proposes a target pairing algorithm for matching the DP range and multipath range of the same target in signal detection, and then, combined with the cell-averaging constant false alarm rate (CA-CFAR) detection model, an incoherent integration detection method for airborne PAR in the multipath environment is proposed. In the target pairing process, the geometric structure relationship of the airborne PAR model can be fully utilized. After a successful target pairing process, the energy of the multipath signal will be incoherently accumulated into the corresponding DP range bin, so as to improve the probability of DP range bin data passing the detection threshold. In essence, the proposed method makes full use of multipath energy to improve the detection capability of airborne PAR in the multipath environment. Finally, the detection probability of the proposed method is given, and the detection performance is analyzed.
- Open Access
- 9 June 2021
- Published by Institution of Engineering and Technology (IET) in IET Radar, Sonar & Navigation
- Vol. 15 (10) , 1173-1180
Direction of arrival estimation of airborne multiple‐input multiple‐output radar in multipath environment
Airborne multiple‐input multiple‐output (MIMO) radar can transmit orthogonal waveforms to increase the range of the detection target. However, in a multipath environment, airborne MIMO radar also has energy radiated to the target through multipath directions, which makes the multipath phenomenon of airborne MIMO radar complicated. Because the direct path signal and the multipath signals of the airborne radar are at different range gates, the characteristics of data between the direct path signal and the multipath signals of the airborne MIMO radar can be used to propose a method for estimating the reflection coefficient amplitude (RCA). Considering that the target echoes data at different range gates can be used to estimate the elevation angle of the target, a direction of arrival (DOA) estimation method using data fusion at low signal‐to‐noise ratio (SNR) is proposed. Moreover, at high SNR, the signal path corresponding to the maximum target echo power is selected for DOA estimation based on the estimated multipath RCA. The proposed method makes full use of all target echo data of airborne MIMO radar in a multipath environment and is suitable for practical applications. Finally, simulation experiments verify that the proposed method can effectively improve the DOA estimation accuracy.
- 9 June 2021
- Published by Institution of Engineering and Technology (IET) in IET Radar, Sonar & Navigation
- Vol. 15 (10) , 1173-1180
Open AccessDirection of arrival estimation of airborne multiple‐input multiple‐output radar in multipath environment
Airborne multiple‐input multiple‐output (MIMO) radar can transmit orthogonal waveforms to increase the range of the detection target. However, in a multipath environment, airborne MIMO radar also has energy radiated to the target through multipath directions, which makes the multipath phenomenon of airborne MIMO radar complicated. Because the direct path signal and the multipath signals of the airborne radar are at different range gates, the characteristics of data between the direct path signal and the multipath signals of the airborne MIMO radar can be used to propose a method for estimating the reflection coefficient amplitude (RCA). Considering that the target echoes data at different range gates can be used to estimate the elevation angle of the target, a direction of arrival (DOA) estimation method using data fusion at low signal‐to‐noise ratio (SNR) is proposed. Moreover, at high SNR, the signal path corresponding to the maximum target echo power is selected for DOA estimation based on the estimated multipath RCA. The proposed method makes full use of all target echo data of airborne MIMO radar in a multipath environment and is suitable for practical applications. Finally, simulation experiments verify that the proposed method can effectively improve the DOA estimation accuracy.
- Open Access
- 26 April 2021
- Published by Institution of Engineering and Technology (IET) in IET Radar, Sonar & Navigation
- Vol. 15 (6) , 655-665
Joint design of transmit beamspace and reduced‐dimension receiver filter for MIMO radar STAP
In this article, the problem of the transmit beamspace (TB) matrix design in multiple‐input multiple‐output (MIMO) radar is considered. To reduce the computational burden and to focus the energy within optimal spatial sector, a joint design method of the TB matrix and a reduced‐dimension space‐time adaptive processing (STAP) filter is proposed based on the maximum signal‐to‐clutter‐plus‐noise ratio (SCNR). Firstly, the signal model of the reduced‐dimension STAP for TB‐based MIMO radar is established. Then, using the maximum SCNR as the design metric, the joint design model of the TB matrix and the reduced‐dimension STAP filter is presented. Furthermore, the cyclic optimisation method is exploited to deal with the non‐convex joint design problem with the energy constraint. Finally, simulation experiments demonstrate the joint design method of the TB matrix and the STAP filter not only has better output SCNR performance but also owns lower computational burden when compared with the other existing methods.
- 26 April 2021
- Published by Institution of Engineering and Technology (IET) in IET Radar, Sonar & Navigation
- Vol. 15 (6) , 655-665
Open AccessJoint design of transmit beamspace and reduced‐dimension receiver filter for MIMO radar STAP
In this article, the problem of the transmit beamspace (TB) matrix design in multiple‐input multiple‐output (MIMO) radar is considered. To reduce the computational burden and to focus the energy within optimal spatial sector, a joint design method of the TB matrix and a reduced‐dimension space‐time adaptive processing (STAP) filter is proposed based on the maximum signal‐to‐clutter‐plus‐noise ratio (SCNR). Firstly, the signal model of the reduced‐dimension STAP for TB‐based MIMO radar is established. Then, using the maximum SCNR as the design metric, the joint design model of the TB matrix and the reduced‐dimension STAP filter is presented. Furthermore, the cyclic optimisation method is exploited to deal with the non‐convex joint design problem with the energy constraint. Finally, simulation experiments demonstrate the joint design method of the TB matrix and the STAP filter not only has better output SCNR performance but also owns lower computational burden when compared with the other existing methods.
- 20 April 2021
- Published by Elsevier in Digital Signal Processing
- Vol. 114, 103072
A reduced-dimension RML method for transmit beamspace-based MIMO radar
- 20 April 2021
- Published by Elsevier in Digital Signal Processing
- Vol. 114, 103072
A reduced-dimension RML method for transmit beamspace-based MIMO radar