Guanzhi Wang
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Guanzhi Wang has a total of 46 co-authors. Here are the top co-authors by number of shared publications:
- Rangachary Mukundan
Lawrence Berkeley National Laboratory, Berkeley, CA 94720, USA
7 shared publications Xiong Peng
Energy Conversion Group, Lawrence Berkeley National Laboratory
7 shared publications- Adam Zev Weber
Lawrence Berkeley National Laboratory
2 shared publications Andrew Tricker
Lawrence Berkeley National Laboratory
2 shared publicationsArthur Dizon
Lawrence Berkeley National Laboratory
2 shared publications- Douglas I. Kushner
Lawrence Berkeley National Laboratory
2 shared publications
Latest Publications
- 24 November 2025
- Published by The Electrochemical Society in ECS Meeting Abstracts
- Vol. MA2025-02 (42) , 2102
Microporous Layer Design to Enable Differential Pressure Operation with Thin PEMs in Water Electrolyzers
Proton-exchange membrane water electrolyzers (PEMWEs) offer many benefits to produce hydrogen at high purity, pressure and flexibility. The levelized-cost of produced hydrogen is highly contingent on operational efficiency of PEMWEs due to high shares of electricity price in determining hydrogen production cost. One of the most straightforward ways to boost PEMWE efficiency is to significantly reduce PEM thickness, therefore minimizing ohmic loss. Currently, relatively high-thickness (>125 µm) of PEMs are used in commercial water electrolyzers. Directly reducing thickness of PEMs in PEMWEs will lead to concerns of high hydrogen crossover and device failure, especially under differential pressures (30 bar). In this talk, we will demonstrate an effective strategy to enable differential pressure operation using thin PEMs (~ 50 µm) by designing microporous layers with various structures. A well-designed microporous layer can provide better support to PEM and minimize membrane creeping and catalyst layer deformation. We also intend to correlate microporous layer structural features with root causes of performance loss in thin-membrane PEMWEs under differential pressure operations. Lastly, a stable PEMWE operated at 3 A/cm 2 and 30 bar differential pressure will be demonstrated.
- 24 November 2025
- Published by The Electrochemical Society in ECS Meeting Abstracts
- Vol. MA2025-02 (42) , 2102
Microporous Layer Design to Enable Differential Pressure Operation with Thin PEMs in Water Electrolyzers
Proton-exchange membrane water electrolyzers (PEMWEs) offer many benefits to produce hydrogen at high purity, pressure and flexibility. The levelized-cost of produced hydrogen is highly contingent on operational efficiency of PEMWEs due to high shares of electricity price in determining hydrogen production cost. One of the most straightforward ways to boost PEMWE efficiency is to significantly reduce PEM thickness, therefore minimizing ohmic loss. Currently, relatively high-thickness (>125 µm) of PEMs are used in commercial water electrolyzers. Directly reducing thickness of PEMs in PEMWEs will lead to concerns of high hydrogen crossover and device failure, especially under differential pressures (30 bar). In this talk, we will demonstrate an effective strategy to enable differential pressure operation using thin PEMs (~ 50 µm) by designing microporous layers with various structures. A well-designed microporous layer can provide better support to PEM and minimize membrane creeping and catalyst layer deformation. We also intend to correlate microporous layer structural features with root causes of performance loss in thin-membrane PEMWEs under differential pressure operations. Lastly, a stable PEMWE operated at 3 A/cm 2 and 30 bar differential pressure will be demonstrated.
- 22 November 2024
- Published by The Electrochemical Society in ECS Meeting Abstracts
- Vol. MA2024-02 (45) , 3192
(Invited) Ionomer-Free Nano-Channeled Electrodes for Proton-Exchange-Membrane Water Electrolyzers
Clean hydrogen, produced through water electrolysis using renewables, is a promising means of decarbonization for hard-to-abate sectors, including transportation, industry, and chemical sectors. Proton-exchange-membrane (PEM) water electrolyzers are one of the leading electrolysis technologies amongst other types of electrolyzers available today with their compact design and rapid response time, which align well with the requirements of renewable energy integration. However, cost remains a major challenge in further adoption of this technology. Specifically, the high cost and limited availability of iridium catalysts used in the anode for oxygen evolution reaction are predicted to become the bottleneck at the gaga-watt (GW) scale, necessitating catalyst loading reduction and recycling processes. In this work, we present the ionomer-free nano-channeled porous transport electrodes (PTEs) aimed at reducing the cost of PEM water electrolyzers. The nano-channeled PTEs demonstrate superior current density (> 9 A/cm2 below 3 V) and reduces overpotential by 190 mV compared to baseline ionomer-free PTEs. In addition, nano-channeled electrodes show minimal degradation after 100k cycles of accelerated stress tests. Decay rate of 11.66 µV/h was achieved over 2000 h operation at 1.8 A/cm2. These results highlight the significance of the localized transport dynamics at the electrode interface in PEM water electrolyzers.
- 22 November 2024
- Published by The Electrochemical Society in ECS Meeting Abstracts
- Vol. MA2024-02 (45) , 3192
(Invited) Ionomer-Free Nano-Channeled Electrodes for Proton-Exchange-Membrane Water Electrolyzers
Clean hydrogen, produced through water electrolysis using renewables, is a promising means of decarbonization for hard-to-abate sectors, including transportation, industry, and chemical sectors. Proton-exchange-membrane (PEM) water electrolyzers are one of the leading electrolysis technologies amongst other types of electrolyzers available today with their compact design and rapid response time, which align well with the requirements of renewable energy integration. However, cost remains a major challenge in further adoption of this technology. Specifically, the high cost and limited availability of iridium catalysts used in the anode for oxygen evolution reaction are predicted to become the bottleneck at the gaga-watt (GW) scale, necessitating catalyst loading reduction and recycling processes. In this work, we present the ionomer-free nano-channeled porous transport electrodes (PTEs) aimed at reducing the cost of PEM water electrolyzers. The nano-channeled PTEs demonstrate superior current density (> 9 A/cm2 below 3 V) and reduces overpotential by 190 mV compared to baseline ionomer-free PTEs. In addition, nano-channeled electrodes show minimal degradation after 100k cycles of accelerated stress tests. Decay rate of 11.66 µV/h was achieved over 2000 h operation at 1.8 A/cm2. These results highlight the significance of the localized transport dynamics at the electrode interface in PEM water electrolyzers.
- 22 November 2024
- Published by The Electrochemical Society in ECS Meeting Abstracts
- Vol. MA2024-02 (45) , 3113
Quantifying H2 Crossover in PEM Water Electrolyzers Operating at High Differential Pressure
Large-scale deployment of proton exchange membrane water electrolyzers (PEMWEs) is crucial for producing clean and economically viable hydrogen to create hydrogen-based energy ecosystems that can replace existing carbon-intensive processes. Efficient operation of PEMWEs requires the use of thinner membranes to reduce ohmic losses as well as the differential pressure operation to increase the overall system efficiency. The high differential pressure operation of PEMWEs with thin membranes results in significant hydrogen crossover from cathode to anode. This crossover-H2 has considerable implications on PEMWE performance, durability, as well as operational safety. In this work, we develop a method to accurately quantify hydrogen crossover rates in PEMWEs operating at high differential pressure. Our analysis shows that crossover-H2 is oxidized at the anode catalyst layer resulting in measurable hydrogen oxidation reaction (HOR) currents. We combine this HOR current measurement with online gas chromatography with thermal conductivity detector to determine H2 concentration in the anode outlet and also calculate H2 crossover rates at various operating current and differential pressures (up to 30 bar). Further, we use this methodology to evaluate the effect of porous transport layer (PTL) coatings (Pt, Ir, and Au) on the HOR current as well as the hydrogen crossover rate in PEMWEs. Acknowledgment: This research is supported by the U.S. Department of Energy (DOE) Hydrogen and Fuel Cell Technologies Office (HFTO) through the Hydrogen from Next-generation Electrolyzers of Water (H2NEW) consortium.
- 22 November 2024
- Published by The Electrochemical Society in ECS Meeting Abstracts
- Vol. MA2024-02 (45) , 3113
Quantifying H2 Crossover in PEM Water Electrolyzers Operating at High Differential Pressure
Large-scale deployment of proton exchange membrane water electrolyzers (PEMWEs) is crucial for producing clean and economically viable hydrogen to create hydrogen-based energy ecosystems that can replace existing carbon-intensive processes. Efficient operation of PEMWEs requires the use of thinner membranes to reduce ohmic losses as well as the differential pressure operation to increase the overall system efficiency. The high differential pressure operation of PEMWEs with thin membranes results in significant hydrogen crossover from cathode to anode. This crossover-H2 has considerable implications on PEMWE performance, durability, as well as operational safety. In this work, we develop a method to accurately quantify hydrogen crossover rates in PEMWEs operating at high differential pressure. Our analysis shows that crossover-H2 is oxidized at the anode catalyst layer resulting in measurable hydrogen oxidation reaction (HOR) currents. We combine this HOR current measurement with online gas chromatography with thermal conductivity detector to determine H2 concentration in the anode outlet and also calculate H2 crossover rates at various operating current and differential pressures (up to 30 bar). Further, we use this methodology to evaluate the effect of porous transport layer (PTL) coatings (Pt, Ir, and Au) on the HOR current as well as the hydrogen crossover rate in PEMWEs. Acknowledgment: This research is supported by the U.S. Department of Energy (DOE) Hydrogen and Fuel Cell Technologies Office (HFTO) through the Hydrogen from Next-generation Electrolyzers of Water (H2NEW) consortium.
- 22 November 2024
- Published by The Electrochemical Society in ECS Meeting Abstracts
- Vol. MA2024-02 (45) , 3178
Investigation of Degradation Mechanism of Liquid Alkaline Water Electrolyzer Under Dynamic Operation Condition
Liquid alkaline water electrolyzers (LAWEs) occupy a pivotal position in the realm of large-scale green hydrogen production1. However, LAWEs face a notable challenge in terms of pronounced electrode degradation under dynamic operating conditions, particularly the induced reverse current phenomenon experienced during transit start-up/shut-down operation2. In this study, in order to comprehend the degradation mechanism of LAWE under dynamic operational conditions, a three-electrode LAWE membrane electrode assembly (MEA) setup is designed to decouple the anode and cathode polarization behavior and track the anode/cathode performance during reverse current operation. Combined with post-mortem characterization, it is demonstrated that the anode performance is improved during reverse current operation due to the continuous formation of OER-active species NiOOH/Ni(OH)2. While severe cathode degradation is found, resulting from the irreversible oxidation of Ni metal to Ni(OH)2, which leads to worsened activity towards HER, decreased conductivity and significant strain-induced mechanical degradation. This research offers a comprehensive examination of the electrode degradation mechanism in LAWE, providing valuable insights to enhance its adaptability to dynamic operations, and contribute to the widespread application of green hydrogen production through electrolysis. Acknowledgement The authors acknowledge the Department of Energy-Office of Energy Efficiency and Renewable Energy-Hydrogen and Fuel Cell Technologies Office (DOE-EERE-HFTO) and the H2 from Next-generation Electrolyzers of Water (H2NEW) consortium for funding under Contact Number DE-AC02-05CH11231. References: Ayers, N. Danilovic, R. Ouimet, M. Carmo, B. Pivovar and M. Bornstein, Annu. Rev. Chem. Biomol. Eng. 2019, 10, 219-239. Kim, S. Jung, K. Kim, H. Kim, J. Kwon, J. Lee, H. Cho, Y. Kim, JACS Au, 2022, 2, 2491-2500.
- 22 November 2024
- Published by The Electrochemical Society in ECS Meeting Abstracts
- Vol. MA2024-02 (45) , 3178
Investigation of Degradation Mechanism of Liquid Alkaline Water Electrolyzer Under Dynamic Operation Condition
Liquid alkaline water electrolyzers (LAWEs) occupy a pivotal position in the realm of large-scale green hydrogen production1. However, LAWEs face a notable challenge in terms of pronounced electrode degradation under dynamic operating conditions, particularly the induced reverse current phenomenon experienced during transit start-up/shut-down operation2. In this study, in order to comprehend the degradation mechanism of LAWE under dynamic operational conditions, a three-electrode LAWE membrane electrode assembly (MEA) setup is designed to decouple the anode and cathode polarization behavior and track the anode/cathode performance during reverse current operation. Combined with post-mortem characterization, it is demonstrated that the anode performance is improved during reverse current operation due to the continuous formation of OER-active species NiOOH/Ni(OH)2. While severe cathode degradation is found, resulting from the irreversible oxidation of Ni metal to Ni(OH)2, which leads to worsened activity towards HER, decreased conductivity and significant strain-induced mechanical degradation. This research offers a comprehensive examination of the electrode degradation mechanism in LAWE, providing valuable insights to enhance its adaptability to dynamic operations, and contribute to the widespread application of green hydrogen production through electrolysis. Acknowledgement The authors acknowledge the Department of Energy-Office of Energy Efficiency and Renewable Energy-Hydrogen and Fuel Cell Technologies Office (DOE-EERE-HFTO) and the H2 from Next-generation Electrolyzers of Water (H2NEW) consortium for funding under Contact Number DE-AC02-05CH11231. References: Ayers, N. Danilovic, R. Ouimet, M. Carmo, B. Pivovar and M. Bornstein, Annu. Rev. Chem. Biomol. Eng. 2019, 10, 219-239. Kim, S. Jung, K. Kim, H. Kim, J. Kwon, J. Lee, H. Cho, Y. Kim, JACS Au, 2022, 2, 2491-2500.
- 9 August 2024
- Published by The Electrochemical Society in ECS Meeting Abstracts
- Vol. MA2024-01 (34) , 1785
Effectiveness of Gas Recombination Catalyst Layers in Mitigating H2 Crossover in PEM Water Electrolyzers Operating at High Differential Pressure
Gigawatt-scale deployment of proton exchange membrane water electrolyzers (PEMWE) to produce green hydrogen at $1/kg of H2, the US department of energy’s (DOE) ultimate cost target, requires the use of thinner membranes to reduce ohmic losses at high current densities as well as differential pressure operation to improve the overall system efficiency.1 High differential pressure operation results in significant hydrogen crossover through PEMs leading to safety concerns due to the formation of a flammable gas mixtures at anode (> 4% H2 in O2).2 Therefore, the successful deployment of PEMWEs at scale relies on successful implementation strategies to reduce the hydrogen concentration at anode to enable safe operation at high efficiency. These strategies include incorporating gas recombination catalyst (GRC) in the membrane, PTL or downstream in the anode gas outlet. However, the impact of GRC layers on PEMWE performance and hydrogen crossover rates at high differential pressure is not well understood. In this work, we employ in-operando gas chromatography coupled with thermal conductivity detector along with PEMWEs operating at differential pressures (up to 30 bar) to quantify hydrogen crossover rates through PEM at differential pressure. Using this setup, we evaluate the effectiveness of gas recombination layers incorporated in PEMWE membrane electrode assemblies (MEA) in mitigating the risk of formation of the flammable gas mixture. Further, we will also discuss implications of high differential pressure operation on PEMWE performance, durability, and operational safety. References: (1) Ayers, K.; Danilovic, N.; Harrison, K.; Xu, H. PEM Electrolysis, a Forerunner for Clean Hydrogen. Electrochem Soc Interface 2021, 30 (4), 67–72. https://doi.org/10.1149/2.F16214IF. (2) Bernt, M.; Schröter, J.; Möckl, M.; Gasteiger, H. A. Analysis of Gas Permeation Phenomena in a PEM Water Electrolyzer Operated at High Pressure and High Current Density. J Electrochem Soc 2020, 167 (12), 124502. https://doi.org/10.1149/1945-7111/abaa68.
- 9 August 2024
- Published by The Electrochemical Society in ECS Meeting Abstracts
- Vol. MA2024-01 (34) , 1785
Effectiveness of Gas Recombination Catalyst Layers in Mitigating H2 Crossover in PEM Water Electrolyzers Operating at High Differential Pressure
Gigawatt-scale deployment of proton exchange membrane water electrolyzers (PEMWE) to produce green hydrogen at $1/kg of H2, the US department of energy’s (DOE) ultimate cost target, requires the use of thinner membranes to reduce ohmic losses at high current densities as well as differential pressure operation to improve the overall system efficiency.1 High differential pressure operation results in significant hydrogen crossover through PEMs leading to safety concerns due to the formation of a flammable gas mixtures at anode (> 4% H2 in O2).2 Therefore, the successful deployment of PEMWEs at scale relies on successful implementation strategies to reduce the hydrogen concentration at anode to enable safe operation at high efficiency. These strategies include incorporating gas recombination catalyst (GRC) in the membrane, PTL or downstream in the anode gas outlet. However, the impact of GRC layers on PEMWE performance and hydrogen crossover rates at high differential pressure is not well understood. In this work, we employ in-operando gas chromatography coupled with thermal conductivity detector along with PEMWEs operating at differential pressures (up to 30 bar) to quantify hydrogen crossover rates through PEM at differential pressure. Using this setup, we evaluate the effectiveness of gas recombination layers incorporated in PEMWE membrane electrode assemblies (MEA) in mitigating the risk of formation of the flammable gas mixture. Further, we will also discuss implications of high differential pressure operation on PEMWE performance, durability, and operational safety. References: (1) Ayers, K.; Danilovic, N.; Harrison, K.; Xu, H. PEM Electrolysis, a Forerunner for Clean Hydrogen. Electrochem Soc Interface 2021, 30 (4), 67–72. https://doi.org/10.1149/2.F16214IF. (2) Bernt, M.; Schröter, J.; Möckl, M.; Gasteiger, H. A. Analysis of Gas Permeation Phenomena in a PEM Water Electrolyzer Operated at High Pressure and High Current Density. J Electrochem Soc 2020, 167 (12), 124502. https://doi.org/10.1149/1945-7111/abaa68.
- 9 August 2024
- Published by The Electrochemical Society in ECS Meeting Abstracts
- Vol. MA2024-01 (34) , 1706
Understanding Performance Limitation of Liquid Alkaline Water Electrolyzers
Green hydrogen production via water electrolysis powered by renewable energy is a critical technology in the pursuit of a net-zero emission economy1. Liquid alkaline water electrolyzers (LAWEs), being the most commercially mature electrolyzer technology, play a pivotal role in large-scale green hydrogen production2. The utilization of earth-abundant and cost-effective nickel and iron-based materials as cell components of LAWEs reduces capital cost of large-scale electrolyzer cells3. However, LAWEs suffer from low operational efficiency, primarily due to low intrinsic activity of unoptimized electrode materials, as well as high ohmic resistance introduced by separators and gas bubbles within thick electrodes. Herein, we used a lab-scale LAWE cell in combination with various electrode configurations to gain a deeper understanding of the limiting factors affecting conventional LAWE performance. Our results show that the electrochemical active surface area (ECSA), chemical compositions, and pore structure of the electrodes are key design parameters to achieve high efficiencies for advanced LAWEs. Besides, particular attention should be paid to the micro-gaps in between electrode and separator, which can be minimized through using electrodes with lower surface porosity and smaller pore size. Consequently, these enabled us to build LAWEs that are capable of sustaining 2 A cm-2 at 2.2 V and operating steadily at 1 A cm-2 for nearly 600 h with negligible performance decay. These findings establish essential criteria for selecting electrodes to achieve high-performance in LAWE and, in turn, expedite the adoption of LAWE technology in green hydrogen production and the transition towards a low-carbon economy. Acknowledgement The authors acknowledge the Department of Energy-Office of Energy Efficiency and Renewable Energy-Hydrogen and Fuel Cell Technologies Office (DOE-EERE-HFTO) and the H2 from Next-generation Electrolyzers of Water (H2NEW) consortium for funding under Contact Number DE-AC02-05CH11231. References: Pivovar, N. Rustagi and S. Satyapal, The Electrochemical Society Interface, 27, 47 (2018). Ayers, N. Danilovic, R. Ouimet, M. Carmo, B. Pivovar and M. Bornstein, Annual review of chemical and biomolecular engineering, 10, 219 (2019). David, C. Ocampo-Martínez and R. Sánchez-Peña, Journal of Energy Storage, 23, 392 (2019).
- 9 August 2024
- Published by The Electrochemical Society in ECS Meeting Abstracts
- Vol. MA2024-01 (34) , 1706
Understanding Performance Limitation of Liquid Alkaline Water Electrolyzers
Green hydrogen production via water electrolysis powered by renewable energy is a critical technology in the pursuit of a net-zero emission economy1. Liquid alkaline water electrolyzers (LAWEs), being the most commercially mature electrolyzer technology, play a pivotal role in large-scale green hydrogen production2. The utilization of earth-abundant and cost-effective nickel and iron-based materials as cell components of LAWEs reduces capital cost of large-scale electrolyzer cells3. However, LAWEs suffer from low operational efficiency, primarily due to low intrinsic activity of unoptimized electrode materials, as well as high ohmic resistance introduced by separators and gas bubbles within thick electrodes. Herein, we used a lab-scale LAWE cell in combination with various electrode configurations to gain a deeper understanding of the limiting factors affecting conventional LAWE performance. Our results show that the electrochemical active surface area (ECSA), chemical compositions, and pore structure of the electrodes are key design parameters to achieve high efficiencies for advanced LAWEs. Besides, particular attention should be paid to the micro-gaps in between electrode and separator, which can be minimized through using electrodes with lower surface porosity and smaller pore size. Consequently, these enabled us to build LAWEs that are capable of sustaining 2 A cm-2 at 2.2 V and operating steadily at 1 A cm-2 for nearly 600 h with negligible performance decay. These findings establish essential criteria for selecting electrodes to achieve high-performance in LAWE and, in turn, expedite the adoption of LAWE technology in green hydrogen production and the transition towards a low-carbon economy. Acknowledgement The authors acknowledge the Department of Energy-Office of Energy Efficiency and Renewable Energy-Hydrogen and Fuel Cell Technologies Office (DOE-EERE-HFTO) and the H2 from Next-generation Electrolyzers of Water (H2NEW) consortium for funding under Contact Number DE-AC02-05CH11231. References: Pivovar, N. Rustagi and S. Satyapal, The Electrochemical Society Interface, 27, 47 (2018). Ayers, N. Danilovic, R. Ouimet, M. Carmo, B. Pivovar and M. Bornstein, Annual review of chemical and biomolecular engineering, 10, 219 (2019). David, C. Ocampo-Martínez and R. Sánchez-Peña, Journal of Energy Storage, 23, 392 (2019).
- Open Access
- 1 August 2024
- Published by The Electrochemical Society in Journal of the Electrochemical Society
- Vol. 171 (8) , 084502
Modeling the Effect of Material Properties on Liquid-Alkaline Water Electrolysis
Liquid-alkaline water electrolyzers (LAWEs) use electricity to drive the conversion of water to H2 and O2 gas. These devices benefit from the use of low-cost nickel electrodes and metal-oxide separators, but suffer from lower current densities and higher cell voltages than proton-exchange-membrane water electrolyzers. Identifying the inefficiencies that result in this poor performance is key to mitigating losses and optimizing LAWEs. Here, we report an experimentally-validated 1-D continuum model of a LAWE that elucidates the gradients within the cell, simulates H2 crossover, and projects the energy improvements made possible by modulating the properties of the electrodes and separator. The model captures the Nernstian polarization losses and the distribution of gas- and liquid-phases within the electrodes, enabling quantification of energy losses associated with kinetic, ohmic, and bubble-induced (mass-transport) resistances. Simulations demonstrate that LAWE can achieve energy intensities of 50 kWh kg−1 of H2 at 1 A cm−2 using improved electrode and separator properties.
- 1 August 2024
- Published by The Electrochemical Society in Journal of the Electrochemical Society
- Vol. 171 (8) , 084502
Open AccessModeling the Effect of Material Properties on Liquid-Alkaline Water Electrolysis
Liquid-alkaline water electrolyzers (LAWEs) use electricity to drive the conversion of water to H2 and O2 gas. These devices benefit from the use of low-cost nickel electrodes and metal-oxide separators, but suffer from lower current densities and higher cell voltages than proton-exchange-membrane water electrolyzers. Identifying the inefficiencies that result in this poor performance is key to mitigating losses and optimizing LAWEs. Here, we report an experimentally-validated 1-D continuum model of a LAWE that elucidates the gradients within the cell, simulates H2 crossover, and projects the energy improvements made possible by modulating the properties of the electrodes and separator. The model captures the Nernstian polarization losses and the distribution of gas- and liquid-phases within the electrodes, enabling quantification of energy losses associated with kinetic, ohmic, and bubble-induced (mass-transport) resistances. Simulations demonstrate that LAWE can achieve energy intensities of 50 kWh kg−1 of H2 at 1 A cm−2 using improved electrode and separator properties.
- 25 July 2024
- Published by American Chemical Society (ACS) in Journal of the American Chemical Society
- Vol. 146 (31) , 21335-21347
Dynamic Bubbling Balanced Proactive CO2 Capture and Reduction on a Triple-Phase Interface Nanoporous Electrocatalyst
The formation and preservation of the active phase of the catalysts at the triple-phase interface during CO2 capture and reduction is essential for improving the conversion efficiency of CO2 electroreduction toward value-added chemicals and fuels under operational conditions. Designing such ideal catalysts that can mitigate parasitic hydrogen generation and prevent active phase degradation during the CO2 reduction reaction (CO2RR), however, remains a significant challenge. Herein, we developed an interfacial engineering strategy to build a new SnOx catalyst by invoking multiscale approaches. This catalyst features a hierarchically nanoporous structure coated with an organic F-monolayer that modifies the triple-phase interface in aqueous electrolytes, substantially reducing competing hydrogen generation (less than 5%) and enhancing CO2RR selectivity (∼90%). This rationally designed triple-phase interface overcomes the issue of limited CO2 solubility in aqueous electrolytes via proactive CO2 capture and reduction. Concurrently, we utilized pulsed square-wave potentials to dynamically recover the active phase for the CO2RR to regulate the production of C1 products such as formate and carbon monoxide (CO). This protocol ensures profoundly enhanced CO2RR selectivity (∼90%) compared with constant potential (∼70%) applied at -0.8 V (V vs RHE). We further achieved a mechanistic understanding of the CO2 capture and reduction processes under pulsed square-wave potentials via in situ Raman spectroscopy, thereby observing the potential-dependent intensity of Raman vibrational modes of the active phase and CO2RR intermediates. This work will inspire material design strategies by leveraging triple-phase interface engineering for emerging electrochemical processes, as technology moves toward electrification and decarbonization.
- 25 July 2024
- Published by American Chemical Society (ACS) in Journal of the American Chemical Society
- Vol. 146 (31) , 21335-21347
Dynamic Bubbling Balanced Proactive CO2 Capture and Reduction on a Triple-Phase Interface Nanoporous Electrocatalyst
The formation and preservation of the active phase of the catalysts at the triple-phase interface during CO2 capture and reduction is essential for improving the conversion efficiency of CO2 electroreduction toward value-added chemicals and fuels under operational conditions. Designing such ideal catalysts that can mitigate parasitic hydrogen generation and prevent active phase degradation during the CO2 reduction reaction (CO2RR), however, remains a significant challenge. Herein, we developed an interfacial engineering strategy to build a new SnOx catalyst by invoking multiscale approaches. This catalyst features a hierarchically nanoporous structure coated with an organic F-monolayer that modifies the triple-phase interface in aqueous electrolytes, substantially reducing competing hydrogen generation (less than 5%) and enhancing CO2RR selectivity (∼90%). This rationally designed triple-phase interface overcomes the issue of limited CO2 solubility in aqueous electrolytes via proactive CO2 capture and reduction. Concurrently, we utilized pulsed square-wave potentials to dynamically recover the active phase for the CO2RR to regulate the production of C1 products such as formate and carbon monoxide (CO). This protocol ensures profoundly enhanced CO2RR selectivity (∼90%) compared with constant potential (∼70%) applied at -0.8 V (V vs RHE). We further achieved a mechanistic understanding of the CO2 capture and reduction processes under pulsed square-wave potentials via in situ Raman spectroscopy, thereby observing the potential-dependent intensity of Raman vibrational modes of the active phase and CO2RR intermediates. This work will inspire material design strategies by leveraging triple-phase interface engineering for emerging electrochemical processes, as technology moves toward electrification and decarbonization.
- 3 June 2024
- Published by The Electrochemical Society in Journal of the Electrochemical Society
- Vol. 171 (6) , 064501
Understanding Performance Limitation of Liquid Alkaline Water Electrolyzers
Liquid alkaline water electrolyzers (LAWEs), being the most commercially mature electrolysis technology, play a pivotal role in large-scale hydrogen production. However, LAWEs suffer from low operational efficiency, primarily due to un-optimized electrode structure and chemical compositions. Thus, we investigated how various electrode configurations could impact LAWE performance. Our results show that Ni felt electrodes outperform the conventional Ni foam thanks to improved electrochemical active surface area (ECSA) and preferred electrode surface structure that minimizes the micro-gaps in between the electrode and separator. By comparing the stainless steel (SS) felt electrodes with Ni felt electrodes, SS not only shows better oxygen evolution reaction activity but also improved hydrogen evolution reaction activity, which is less studied in the literature. We also show that a bilayer structure with small pore radius facing the separator could further improve LAWE performance by further optimizing interfacial contact between electrode and separator. These findings enable LAWEs to sustain 2 A cm−2 at 2.2 V and operate steadily at 1 A cm−2 for nearly 600 h with negligible performance decay. Our studies establish criteria for selecting electrodes to achieve high-performance LAWE and, in turn, expedite the adoption of LAWEs in hydrogen production and the transition towards low-carbon economies.
- 3 June 2024
- Published by The Electrochemical Society in Journal of the Electrochemical Society
- Vol. 171 (6) , 064501
Understanding Performance Limitation of Liquid Alkaline Water Electrolyzers
Liquid alkaline water electrolyzers (LAWEs), being the most commercially mature electrolysis technology, play a pivotal role in large-scale hydrogen production. However, LAWEs suffer from low operational efficiency, primarily due to un-optimized electrode structure and chemical compositions. Thus, we investigated how various electrode configurations could impact LAWE performance. Our results show that Ni felt electrodes outperform the conventional Ni foam thanks to improved electrochemical active surface area (ECSA) and preferred electrode surface structure that minimizes the micro-gaps in between the electrode and separator. By comparing the stainless steel (SS) felt electrodes with Ni felt electrodes, SS not only shows better oxygen evolution reaction activity but also improved hydrogen evolution reaction activity, which is less studied in the literature. We also show that a bilayer structure with small pore radius facing the separator could further improve LAWE performance by further optimizing interfacial contact between electrode and separator. These findings enable LAWEs to sustain 2 A cm−2 at 2.2 V and operate steadily at 1 A cm−2 for nearly 600 h with negligible performance decay. Our studies establish criteria for selecting electrodes to achieve high-performance LAWE and, in turn, expedite the adoption of LAWEs in hydrogen production and the transition towards low-carbon economies.
- 1 May 2022
- Published by Elsevier in Journal of Energy Chemistry
- Vol. 68, 439-453
Atomically dispersed catalysts for small molecule electrooxidation in direct liquid fuel cells
- 1 May 2022
- Published by Elsevier in Journal of Energy Chemistry
- Vol. 68, 439-453
Atomically dispersed catalysts for small molecule electrooxidation in direct liquid fuel cells