Takahiko Endo
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Takahiko Endo has a total of 126 co-authors. Here are the top co-authors by number of shared publications:
- Yasumitsu Miyata
National Institute for Materials Science
19 shared publications - Yusuke Nakanishi
Department of Advanced Materials Science, The University of Tokyo, Kashiwa, Japan
9 shared publications - Zheng Liu
National Institute of Advanced Industrial Science and Technology
9 shared publications - Susumu Okada
University of Tsukuba
7 shared publications - Jiang Pu
Department of Applied Physics, Nagoya University, Nagoya 464-8603, Japan
5 shared publications - Mina Maruyama
University of Tsukuba
5 shared publications
Latest Publications
- 23 September 2025
- Published by American Chemical Society (ACS) in Nano Letters
- Vol. 25 (40) , 14645-14652
Confined Growth of Few-Nanometer MoS2 Nanoribbons with Optical Anisotropy in Insulating Nanotubes
One-dimensional (1D) nanoribbons of transition metal dichalcogenides (TMDs) are predicted to exhibit exotic quantum phenomena that make them attractive for use in nanoscale electronic and spintronic devices. However, exploring the potential of ultranarrow TMD nanoribbons remains a challenge due to the lack of a suitable platform. Here, we report the atomically precise growth of ultranarrow MoS2 nanoribbons within boron nitride nanotubes (BNNTs). The insulating nature of BNNTs enables direct optical probing of the encapsulated species without perturbing their intrinsic properties. Atomic-resolution transmission electron microscopy reveals the preferential growth of bilayers along the zigzag direction. Raman spectra confirm that the encapsulated structures experience significant strain. Angle-resolved polarized Raman spectroscopy reveals strong optical anisotropy in the 1D geometry, markedly distinct from that of the isotropic 2D MoS2 sheets. Our approach offers an ideal platform for exploring intrinsic optical properties and device applications in ultranarrow TMD nanoribbons.
- 23 September 2025
- Published by American Chemical Society (ACS) in Nano Letters
- Vol. 25 (40) , 14645-14652
Confined Growth of Few-Nanometer MoS2 Nanoribbons with Optical Anisotropy in Insulating Nanotubes
One-dimensional (1D) nanoribbons of transition metal dichalcogenides (TMDs) are predicted to exhibit exotic quantum phenomena that make them attractive for use in nanoscale electronic and spintronic devices. However, exploring the potential of ultranarrow TMD nanoribbons remains a challenge due to the lack of a suitable platform. Here, we report the atomically precise growth of ultranarrow MoS2 nanoribbons within boron nitride nanotubes (BNNTs). The insulating nature of BNNTs enables direct optical probing of the encapsulated species without perturbing their intrinsic properties. Atomic-resolution transmission electron microscopy reveals the preferential growth of bilayers along the zigzag direction. Raman spectra confirm that the encapsulated structures experience significant strain. Angle-resolved polarized Raman spectroscopy reveals strong optical anisotropy in the 1D geometry, markedly distinct from that of the isotropic 2D MoS2 sheets. Our approach offers an ideal platform for exploring intrinsic optical properties and device applications in ultranarrow TMD nanoribbons.
- Open Access
- 23 September 2025
- Published by American Chemical Society (ACS) in ACS Nano
- Vol. 19 (39) , 34918-34927
Tunable-Diameter Nanoscrolls from Janus WSSe/WSe2 Heterostructures
Janus transition metal dichalcogenide (TMD) nanoscrolls have recently emerged as promising nanostructures for studying curvature- and chirality-dependent physical phenomena. However, systematic strategies to fabricate multilayer Janus TMD nanoscrolls with controlled diameters and to probe their structure-dependent optical behaviors are still lacking. Expanding on the previous finding that Janus TMD monolayers─with intrinsic asymmetry and built-in strain─spontaneously form nanoscrolls, we now demonstrate diameter-tunable nanoscrolls derived from Janus WSSe/WSe2 heterostructures. The incorporation of a Janus monolayer facilitates the scrolling of heterostructures and enables continuous tuning of nanoscroll diameters across a broad range─from ∼10 nm to ∼1 μm. The resulting structures exhibit uniform crystallinity and composition, as confirmed by scanning transmission electron microscopy. Optical characterizations reveal anisotropic Raman responses and strain-induced modulation of second-harmonic generation (SHG). These results indicate that Janus-based nanoscrolls provide a versatile platform for investigating structure-property relationships and developing rolled TMD systems for advanced photonic and optoelectronic applications.
- 23 September 2025
- Published by American Chemical Society (ACS) in ACS Nano
- Vol. 19 (39) , 34918-34927
Open AccessTunable-Diameter Nanoscrolls from Janus WSSe/WSe2 Heterostructures
Janus transition metal dichalcogenide (TMD) nanoscrolls have recently emerged as promising nanostructures for studying curvature- and chirality-dependent physical phenomena. However, systematic strategies to fabricate multilayer Janus TMD nanoscrolls with controlled diameters and to probe their structure-dependent optical behaviors are still lacking. Expanding on the previous finding that Janus TMD monolayers─with intrinsic asymmetry and built-in strain─spontaneously form nanoscrolls, we now demonstrate diameter-tunable nanoscrolls derived from Janus WSSe/WSe2 heterostructures. The incorporation of a Janus monolayer facilitates the scrolling of heterostructures and enables continuous tuning of nanoscroll diameters across a broad range─from ∼10 nm to ∼1 μm. The resulting structures exhibit uniform crystallinity and composition, as confirmed by scanning transmission electron microscopy. Optical characterizations reveal anisotropic Raman responses and strain-induced modulation of second-harmonic generation (SHG). These results indicate that Janus-based nanoscrolls provide a versatile platform for investigating structure-property relationships and developing rolled TMD systems for advanced photonic and optoelectronic applications.
- 25 November 2024
- Published by AIP Publishing in Applied Physics Letters
- Vol. 125 (22)
Spatial and reconfigurable control of photoluminescence from single-layer MoS2 using a strained VO2-based Fabry–Pérot cavity
We investigated the photoluminescence (PL) from single-layer MoS2 on VO2 platelets grown on SiO2, where the insulating and metallic phases can coexist above a bulk transition temperature of 340 K, due to the inhomogeneous strain. We found that the intensity of PL from MoS2 on metallic VO2 is higher than that on the insulating counterpart, resulting in spatially varying PL even at the sub-micrometer scale. In contrast to the intensity, the PL peak energies were observed to be nearly identical on insulating and metallic VO2, indicating that the influences of charge transfer, strain, and dielectric screening on MoS2 are comparable, regardless of the phase state. Thus, the observed difference in PL intensity is due to the difference in refractive indices of insulating and metallic VO2, leading to the phase-dependent Fabry–Pérot interference effect. We performed numerical simulations for the emission from MoS2 supported on the VO2-based Fabry–Pérot interferometer. The calculated emission intensity ratio on insulating and metallic VO2 well reproduces the experimental observations. These results suggest a strategy for controlling PL from two-dimensional semiconductors in a spatial and reconfigurable manner.
- 25 November 2024
- Published by AIP Publishing in Applied Physics Letters
- Vol. 125 (22)
Spatial and reconfigurable control of photoluminescence from single-layer MoS2 using a strained VO2-based Fabry–Pérot cavity
We investigated the photoluminescence (PL) from single-layer MoS2 on VO2 platelets grown on SiO2, where the insulating and metallic phases can coexist above a bulk transition temperature of 340 K, due to the inhomogeneous strain. We found that the intensity of PL from MoS2 on metallic VO2 is higher than that on the insulating counterpart, resulting in spatially varying PL even at the sub-micrometer scale. In contrast to the intensity, the PL peak energies were observed to be nearly identical on insulating and metallic VO2, indicating that the influences of charge transfer, strain, and dielectric screening on MoS2 are comparable, regardless of the phase state. Thus, the observed difference in PL intensity is due to the difference in refractive indices of insulating and metallic VO2, leading to the phase-dependent Fabry–Pérot interference effect. We performed numerical simulations for the emission from MoS2 supported on the VO2-based Fabry–Pérot interferometer. The calculated emission intensity ratio on insulating and metallic VO2 well reproduces the experimental observations. These results suggest a strategy for controlling PL from two-dimensional semiconductors in a spatial and reconfigurable manner.
- Open Access
- 3 November 2024
- Published by American Chemical Society (ACS) in ChemRxiv
Microdroplet fusion driving the mass formation of twisted bilayer molybdenum disulfide fragments via spontaneous liquid-liquid phase separation
The stacking of 2D materials has attracted attention from emergent properties by Moiré patterns, a degree of freedom that is artificially controlled. However, the current process of arranging Moiré patterns, which involves mechanically repeating the pick-up and restacking of 2D materials, is a non-scalable method. Here, we developed a method of mass producing twisted stacking structures of 2D materials using the cohesive motion of droplets formed via the liquid-liquid phase separation phenomenon, in which droplets spontaneously form in a uniform solution. The droplets move in the separated liquid matrix, induce the folding of 2D materials, and enable the mass production of twisted stacking structures.
- 3 November 2024
- Published by American Chemical Society (ACS) in ChemRxiv
Open AccessMicrodroplet fusion driving the mass formation of twisted bilayer molybdenum disulfide fragments via spontaneous liquid-liquid phase separation
The stacking of 2D materials has attracted attention from emergent properties by Moiré patterns, a degree of freedom that is artificially controlled. However, the current process of arranging Moiré patterns, which involves mechanically repeating the pick-up and restacking of 2D materials, is a non-scalable method. Here, we developed a method of mass producing twisted stacking structures of 2D materials using the cohesive motion of droplets formed via the liquid-liquid phase separation phenomenon, in which droplets spontaneously form in a uniform solution. The droplets move in the separated liquid matrix, induce the folding of 2D materials, and enable the mass production of twisted stacking structures.
- Open Access
- 25 July 2024
- Published by Wiley in Advanced Materials
- Vol. 36 (39) , e2404249
Superatomic Layer of Cubic Mo4S4 Clusters Connected by Cl Cross‐Linking
Superatomic clusters – assemblies of atoms with various sizes, shapes, and compositions – can form hierarchical architectures that exhibit emergent electronic properties not found in their individual units. In particular, cubic M4X4 clusters of chalcogenides (M = transition metal; X = chalcogen) are recognized as versatile building blocks for 3D structures with tunable morphologies and electronic properties. However, tetrahedral M4X4 clusters rarely assemble into 2D architectures, which could offer a distinct class of functional materials from their 3D analogues. Here, this work reports the preparation of 2D Mo8S8Cl11, a superatomic layer with a sandwich structure consisting of Mo4S4 clusters interconnected through Cl cross‐linking. The vapor‐phase reaction inside nanotubes promotes the selective growth of Mo8S8Cl11 nanoribbons, allowing detailed characterization via transmission electron microscopy. This methodology can be applied to the growth of layered structures containing Mo8S8Cl11 at the micrometer scale. This work has demonstrated that mono‐ and few‐layer Mo8S8Cl11 can be prepared by exfoliation of parent solids. Electronic structure calculations indicate that the 2D monolayer has quasi‐flat bands, giving rise to an indirect‐to‐direct bandgap transition under mechanical strain. Furthermore, scanning electrochemical microscopy reveals the potential of the layered structures as highly efficient catalysts for the hydrogen‐evolution reaction.
- 25 July 2024
- Published by Wiley in Advanced Materials
- Vol. 36 (39) , e2404249
Open AccessSuperatomic Layer of Cubic Mo4S4 Clusters Connected by Cl Cross‐Linking
Superatomic clusters – assemblies of atoms with various sizes, shapes, and compositions – can form hierarchical architectures that exhibit emergent electronic properties not found in their individual units. In particular, cubic M4X4 clusters of chalcogenides (M = transition metal; X = chalcogen) are recognized as versatile building blocks for 3D structures with tunable morphologies and electronic properties. However, tetrahedral M4X4 clusters rarely assemble into 2D architectures, which could offer a distinct class of functional materials from their 3D analogues. Here, this work reports the preparation of 2D Mo8S8Cl11, a superatomic layer with a sandwich structure consisting of Mo4S4 clusters interconnected through Cl cross‐linking. The vapor‐phase reaction inside nanotubes promotes the selective growth of Mo8S8Cl11 nanoribbons, allowing detailed characterization via transmission electron microscopy. This methodology can be applied to the growth of layered structures containing Mo8S8Cl11 at the micrometer scale. This work has demonstrated that mono‐ and few‐layer Mo8S8Cl11 can be prepared by exfoliation of parent solids. Electronic structure calculations indicate that the 2D monolayer has quasi‐flat bands, giving rise to an indirect‐to‐direct bandgap transition under mechanical strain. Furthermore, scanning electrochemical microscopy reveals the potential of the layered structures as highly efficient catalysts for the hydrogen‐evolution reaction.
- Open Access
- 7 May 2024
- Published by Wiley in Small Structures
- Vol. 5 (5)
Chemically Tailored Semiconductor Moiré Superlattices of Janus Heterobilayers
- 7 May 2024
- Published by Wiley in Small Structures
- Vol. 5 (5)
Open AccessChemically Tailored Semiconductor Moiré Superlattices of Janus Heterobilayers
- Open Access
- 1 March 2024
- Published by Wiley in Small Structures
- Vol. 5 (5)
Chemically Tailored Semiconductor Moiré Superlattices of Janus Heterobilayers
Janus monolayers of transition metal dichalcogenides (TMDCs) are promising building blocks for moiré superlattices because of their built‐in electric field and clean fabrication process. In particular, Janus TMDC monolayers can be chemically converted from conventional TMDC monolayers by atomic substitution, enabling the direct formation of lattice‐mismatched heterobilayers from TMDC bilayers. However, the moiré superlattices of Janus heterobilayers have not been studied experimentally. Herein, this work reports the fabrication and characterization of semiconductor moiré superlattices in chemically tailored Janus heterobilayers. The MoSSe/MoSe2 (or WSSe/WSe2) Janus heterobilayers are prepared by replacing the top layer Se atoms with S atoms in MoSe2 (or WSe2) bilayer using H2 plasma treatment. Scanning transmission electron microscopy reveals that an average moiré period of about 14 nm formed due to lattice mismatch resulting from the chalcogen substitutions. The cryogenic photoluminescence spectra show sharp, near‐infrared emissions, which are attributed to excitons trapped by moiré potentials based on comparison with theoretical calculations. The Janus‐based heterostructures provide a long‐period moiré system with built‐in potential even for nontwisted heterobilayers, allowing the functionalization of confined and correlated electron systems.
- 1 March 2024
- Published by Wiley in Small Structures
- Vol. 5 (5)
Open AccessChemically Tailored Semiconductor Moiré Superlattices of Janus Heterobilayers
Janus monolayers of transition metal dichalcogenides (TMDCs) are promising building blocks for moiré superlattices because of their built‐in electric field and clean fabrication process. In particular, Janus TMDC monolayers can be chemically converted from conventional TMDC monolayers by atomic substitution, enabling the direct formation of lattice‐mismatched heterobilayers from TMDC bilayers. However, the moiré superlattices of Janus heterobilayers have not been studied experimentally. Herein, this work reports the fabrication and characterization of semiconductor moiré superlattices in chemically tailored Janus heterobilayers. The MoSSe/MoSe2 (or WSSe/WSe2) Janus heterobilayers are prepared by replacing the top layer Se atoms with S atoms in MoSe2 (or WSe2) bilayer using H2 plasma treatment. Scanning transmission electron microscopy reveals that an average moiré period of about 14 nm formed due to lattice mismatch resulting from the chalcogen substitutions. The cryogenic photoluminescence spectra show sharp, near‐infrared emissions, which are attributed to excitons trapped by moiré potentials based on comparison with theoretical calculations. The Janus‐based heterostructures provide a long‐period moiré system with built‐in potential even for nontwisted heterobilayers, allowing the functionalization of confined and correlated electron systems.
- 17 January 2024
- Published by American Chemical Society (ACS) in ACS Nano
- Vol. 18 (4) , 2772-2781
Nanoscrolls of Janus Monolayer Transition Metal Dichalcogenides
Tubular structures of transition metal dichalcogenides (TMDCs) have attracted attention in recent years due to their emergent physical properties, such as the giant bulk photovoltaic effect and chirality-dependent superconductivity. To understand and control these properties, it is highly desirable to develop a sophisticated method to fabricate TMDC tubular structures with smaller diameters and a more uniform crystalline orientation. For this purpose, the rolling up of TMDC monolayers into nanoscrolls is an attractive approach to fabricating such a tubular structure. However, the symmetric atomic arrangement of a monolayer TMDC generally makes its tubular structure energetically unstable due to considerable lattice strain in curved monolayers. Here, we report the fabrication of narrow nanoscrolls by using Janus TMDC monolayers, which have an out-of-plane asymmetric structure. Janus WSSe and MoSSe monolayers were prepared by the plasma-assisted surface atom substitution of WSe2 and MoSe2 monolayers, respectively, and then were rolled by solution treatment. The multilayer tubular structures of Janus nanoscrolls were revealed by scanning transmission electron microscopy observations. Atomic resolution elemental analysis confirmed that the Janus monolayers were rolled up with the Se-side surface on the outside. We found that the present nanoscrolls have the smallest diameter of about 5 nm, which is almost the same as the value predicted by the DFT calculation. The difference in work functions between the S- and Se-side surfaces was measured by Kelvin probe force microscopy, which is in good agreement with the theoretical prediction. Strong interlayer interactions and anisotropic optical responses of the Janus nanoscrolls were also revealed by Raman and photoluminescence spectroscopy.
- 17 January 2024
- Published by American Chemical Society (ACS) in ACS Nano
- Vol. 18 (4) , 2772-2781
Nanoscrolls of Janus Monolayer Transition Metal Dichalcogenides
Tubular structures of transition metal dichalcogenides (TMDCs) have attracted attention in recent years due to their emergent physical properties, such as the giant bulk photovoltaic effect and chirality-dependent superconductivity. To understand and control these properties, it is highly desirable to develop a sophisticated method to fabricate TMDC tubular structures with smaller diameters and a more uniform crystalline orientation. For this purpose, the rolling up of TMDC monolayers into nanoscrolls is an attractive approach to fabricating such a tubular structure. However, the symmetric atomic arrangement of a monolayer TMDC generally makes its tubular structure energetically unstable due to considerable lattice strain in curved monolayers. Here, we report the fabrication of narrow nanoscrolls by using Janus TMDC monolayers, which have an out-of-plane asymmetric structure. Janus WSSe and MoSSe monolayers were prepared by the plasma-assisted surface atom substitution of WSe2 and MoSe2 monolayers, respectively, and then were rolled by solution treatment. The multilayer tubular structures of Janus nanoscrolls were revealed by scanning transmission electron microscopy observations. Atomic resolution elemental analysis confirmed that the Janus monolayers were rolled up with the Se-side surface on the outside. We found that the present nanoscrolls have the smallest diameter of about 5 nm, which is almost the same as the value predicted by the DFT calculation. The difference in work functions between the S- and Se-side surfaces was measured by Kelvin probe force microscopy, which is in good agreement with the theoretical prediction. Strong interlayer interactions and anisotropic optical responses of the Janus nanoscrolls were also revealed by Raman and photoluminescence spectroscopy.
- 20 December 2023
- Published by IOP Publishing in Japanese Journal of Applied Physics
- Vol. 63 (1) , 01SP15
Characterization of band alignment at a metal–MoS2 interface by Kelvin probe force microscopy
Transition metal dichalcogenides, such as MoS2, have garnered considerable attention because of their significant potential in device applications. A limiting factor in their development is the formation of a Schottky barrier with strong Fermi-level pinning at the metal–MoS2 interface. Herein, we report Kelvin probe force microscopy (KPFM) measurements of the work function (WF) modulation at this interface. We found an increase in the WF at the metal–MoS2 interface, depending on the layer number and the contact metal used, indicating the formation of a Schottky barrier. These variations potentially arise from the layer-number-dependent strength of Fermi-level pinning in MoS2. Visualization and calculation of WF modulation at metal–MoS2 interfaces using the KPFM method can help understand the structure and properties of such interfaces.
- 20 December 2023
- Published by IOP Publishing in Japanese Journal of Applied Physics
- Vol. 63 (1) , 01SP15
Characterization of band alignment at a metal–MoS2 interface by Kelvin probe force microscopy
Transition metal dichalcogenides, such as MoS2, have garnered considerable attention because of their significant potential in device applications. A limiting factor in their development is the formation of a Schottky barrier with strong Fermi-level pinning at the metal–MoS2 interface. Herein, we report Kelvin probe force microscopy (KPFM) measurements of the work function (WF) modulation at this interface. We found an increase in the WF at the metal–MoS2 interface, depending on the layer number and the contact metal used, indicating the formation of a Schottky barrier. These variations potentially arise from the layer-number-dependent strength of Fermi-level pinning in MoS2. Visualization and calculation of WF modulation at metal–MoS2 interfaces using the KPFM method can help understand the structure and properties of such interfaces.
- Open Access
- 20 September 2023
- Published by American Chemical Society (ACS) in ACS Omega
- Vol. 8 (41) , 38386-38393
Remote Excitation of Tip-Enhanced Photoluminescence with a Parallel AgNW Coupler
Tip-enhanced photoluminescence (TEPL) microscopy allows for the correlation of scanning probe microscopic images and photoluminescent spectra at the nanoscale level in a similar way to tip-enhanced Raman scattering (TERS) microscopy. However, due to the higher cross-section of fluorescence compared to Raman scattering, the diffraction-limited background signal generated by far-field excitation is a limiting factor in the achievable spatial resolution of TEPL. Here, we demonstrate a way to overcome this drawback by using remote excitation TEPL (RE-TEPL). With this approach, the excitation and detection positions are spatially separated, minimizing the far-field contribution. Two probe designs are evaluated, both experimentally and via simulations. The first system consists of gold nanoparticles (AuNPs) through photoinduced deposition on a silver nanowire (AgNW), and the second system consists of two offset parallel AgNWs. This latter coupler system shows a higher coupling efficiency and is used to successfully demonstrate RE-TEPL spectral mapping on a MoSe2/WSe2 lateral heterostructure to reveal spatial heterogeneity at the heterojunction.
- 20 September 2023
- Published by American Chemical Society (ACS) in ACS Omega
- Vol. 8 (41) , 38386-38393
Open AccessRemote Excitation of Tip-Enhanced Photoluminescence with a Parallel AgNW Coupler
Tip-enhanced photoluminescence (TEPL) microscopy allows for the correlation of scanning probe microscopic images and photoluminescent spectra at the nanoscale level in a similar way to tip-enhanced Raman scattering (TERS) microscopy. However, due to the higher cross-section of fluorescence compared to Raman scattering, the diffraction-limited background signal generated by far-field excitation is a limiting factor in the achievable spatial resolution of TEPL. Here, we demonstrate a way to overcome this drawback by using remote excitation TEPL (RE-TEPL). With this approach, the excitation and detection positions are spatially separated, minimizing the far-field contribution. Two probe designs are evaluated, both experimentally and via simulations. The first system consists of gold nanoparticles (AuNPs) through photoinduced deposition on a silver nanowire (AgNW), and the second system consists of two offset parallel AgNWs. This latter coupler system shows a higher coupling efficiency and is used to successfully demonstrate RE-TEPL spectral mapping on a MoSe2/WSe2 lateral heterostructure to reveal spatial heterogeneity at the heterojunction.