Diana Yu. Savon
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Previous Organizations / Institutes
The organizations / institutes from the scholar's other articles in the past ten years
Diana Yu. Savon has a total of 30 co-authors. Here are the top co-authors by number of shared publications:
- Konstantin P. Kolotyrin
Vavilov Saratov State Agrarian University
4 shared publications - Vera Petrovna Samarina
Federal Research Center “Kola Science Center of the Russian Academy of Sciences” (KSC RAS)
3 shared publications - Татьяна Петровна Скуфьина
Federal Research Center “Kola Science Center of the Russian Academy of Sciences” (KSC RAS)
3 shared publications A.E. Safronov
2 shared publications- S. A. Bogatyryov
Саратовский государственный университет генетики, биотехнологии и инженерии имени Н.И. Вавилова
2 shared publications - Yuri Yuryevich Kostyukhin
Bauman Moscow State Technical University
2 shared publications
Latest Publications
- Open Access
- 3 September 2024
- Published by National University of Science and Technology MISiS in Russian Journal of Industrial Economics
- Vol. 17 (3) , 291-299
Peculiar features of economic evaluation of investment projects on industrial processing of animal by-products
During the implementation of the projects on industrial processing of animal byproducts it extremely important to take into account the peculiar features of the technological process of processing animal by-products to ensure the safety of manufactured products and all stages of the production process. In order to do this it is necessary to identify the potential risks which will influence the projects on utilization of animal by-products and to strictly follow the legal requirements in this field. While implementing the projects in processing animal by-products special attention should be paid to adaptation of technological process to the current world trends and requirements of the industries of the agricultural complex. The main task in the implementation of the projects on industrial processing of animal byproducts is to encourage investors while implementing the projects, the opportunities to decrease the risks, and to receive a full economic justification for making capital investments in projects of this type. The authors suggest a method of calculation of economic effectiveness of investment projects on industrial processing of animal by-products which includes taking into account the risks on the basis of cumulative calculation of the discount rate. In particular, it is proposed to consider environmental, scientific research, regulatory and economic risks. Application of this method in the implementation of the projects on industrial processing of animal by-products will allow both providing objective evaluation of economic and environmental effectiveness of the projects and encouraging investors to participate in the projects of this type.
- 3 September 2024
- Published by National University of Science and Technology MISiS in Russian Journal of Industrial Economics
- Vol. 17 (3) , 291-299
Open AccessPeculiar features of economic evaluation of investment projects on industrial processing of animal by-products
During the implementation of the projects on industrial processing of animal byproducts it extremely important to take into account the peculiar features of the technological process of processing animal by-products to ensure the safety of manufactured products and all stages of the production process. In order to do this it is necessary to identify the potential risks which will influence the projects on utilization of animal by-products and to strictly follow the legal requirements in this field. While implementing the projects in processing animal by-products special attention should be paid to adaptation of technological process to the current world trends and requirements of the industries of the agricultural complex. The main task in the implementation of the projects on industrial processing of animal byproducts is to encourage investors while implementing the projects, the opportunities to decrease the risks, and to receive a full economic justification for making capital investments in projects of this type. The authors suggest a method of calculation of economic effectiveness of investment projects on industrial processing of animal by-products which includes taking into account the risks on the basis of cumulative calculation of the discount rate. In particular, it is proposed to consider environmental, scientific research, regulatory and economic risks. Application of this method in the implementation of the projects on industrial processing of animal by-products will allow both providing objective evaluation of economic and environmental effectiveness of the projects and encouraging investors to participate in the projects of this type.
- Open Access
- 24 September 2023
- Published by National University of Science and Technology MISiS in Russian Journal of Industrial Economics
- Vol. 16 (3) , 335-343
Aspects of the formation of the concept of strategic development of the Kuzbass fuel and energy complex as an integration economic system in the face of radical challenges of the external environment
В статье доказывается значимость и актуальность концепции стратегического развития регионального топливно-энергетического комплекса (ТЭК), базирующейся на триаде: инновационные кластерные образования, гармонизация пропорций по графо-аналитической модели, формирование эффективной системы противосанкционного давления. Предложено рассматривать региональные ТЭК как сложные иерархические организационные техническо-экономические системы, имеющие глобальную цель – эффективное функционирование в пределах жизненного цикла. Доказано, что вопросы альтернативного выбора кластерных образований возможны только на основе системного критерия, учитывающего не только финансово-экономические показатели, но и технико-технологические, социальные, экологические. Представлена вербальная сравнительная оценка кластерных образований: регионального промышленного кластера (мегакластера), углеэнергетического комплекса (мезокластера), шахто-системы (миникластера) по классификационным характеристикам кластера. Утверждается, что любое кластерное образование имеет право на реализацию при условии прохождения критериального барьера по социально-экономической эффективности. Определено, что для регионального ТЭК глобальная цель – обеспечение энергетической безопасности региона. В условиях санкций для Кузбасса необходимо адаптировать экономику на кардинальное изменение транспортных потоков и развивать функционирование регионального ТЭК на основе гармонизации параметров базовых элементов по графо-аналитической модели. Для формирования целевых ориентиров необходимо прогнозировать и моделировать тенденции развития регионального ТЭК, что предопределяет научное методическое обеспечение по оптимизационным моделям. Базовую основу региональной энергетической концепции составляет графо-аналитическая модель взаимосвязи субъектов стратегического управления и соотношения технологических элементов функционирования ТЭК Кузбасса. Нахождение предельных параметров во всех элементах концептуального неравенства взаимодействия, т.е. определение условно-оптимальных параметров производства угля, транспорта и спроса, необходимых энергетических мощностей и экологического ограничения нужны для принятия стратегических решений и обеспечат синергетический эффект во всей системе производства региона.
- 24 September 2023
- Published by National University of Science and Technology MISiS in Russian Journal of Industrial Economics
- Vol. 16 (3) , 335-343
Open AccessAspects of the formation of the concept of strategic development of the Kuzbass fuel and energy complex as an integration economic system in the face of radical challenges of the external environment
В статье доказывается значимость и актуальность концепции стратегического развития регионального топливно-энергетического комплекса (ТЭК), базирующейся на триаде: инновационные кластерные образования, гармонизация пропорций по графо-аналитической модели, формирование эффективной системы противосанкционного давления. Предложено рассматривать региональные ТЭК как сложные иерархические организационные техническо-экономические системы, имеющие глобальную цель – эффективное функционирование в пределах жизненного цикла. Доказано, что вопросы альтернативного выбора кластерных образований возможны только на основе системного критерия, учитывающего не только финансово-экономические показатели, но и технико-технологические, социальные, экологические. Представлена вербальная сравнительная оценка кластерных образований: регионального промышленного кластера (мегакластера), углеэнергетического комплекса (мезокластера), шахто-системы (миникластера) по классификационным характеристикам кластера. Утверждается, что любое кластерное образование имеет право на реализацию при условии прохождения критериального барьера по социально-экономической эффективности. Определено, что для регионального ТЭК глобальная цель – обеспечение энергетической безопасности региона. В условиях санкций для Кузбасса необходимо адаптировать экономику на кардинальное изменение транспортных потоков и развивать функционирование регионального ТЭК на основе гармонизации параметров базовых элементов по графо-аналитической модели. Для формирования целевых ориентиров необходимо прогнозировать и моделировать тенденции развития регионального ТЭК, что предопределяет научное методическое обеспечение по оптимизационным моделям. Базовую основу региональной энергетической концепции составляет графо-аналитическая модель взаимосвязи субъектов стратегического управления и соотношения технологических элементов функционирования ТЭК Кузбасса. Нахождение предельных параметров во всех элементах концептуального неравенства взаимодействия, т.е. определение условно-оптимальных параметров производства угля, транспорта и спроса, необходимых энергетических мощностей и экологического ограничения нужны для принятия стратегических решений и обеспечат синергетический эффект во всей системе производства региона.
- Open Access
- 2 January 2023
- Published by National University of Science and Technology MISiS in Russian Journal of Industrial Economics
- Vol. 15 (4) , 399-406
Economic justification of industrial production of a resource-saving unit for strip tillage
It is a well-known fact that the existing methods of continuous plow tillage are associated with high consumption of anthropogenic energy for plowing and with probability of occurrence of degradation in it. The alternative to the continuous plowing is non-inversion tillage systems related to resource-saving agriculture. At present, combined tillage implements are widely used. They are equipped with devices for applying fertilizers to plowed strips, and in spring the seeds of a certain row crop (sunflower or corn, for example) are sown there exactly in line with the upgraded seeder equipped with an agronavigator for precision farming. The task of the study is to make the preliminary economic justification of the expediency of using various implements for soil-loosening by strip conservation plowing and the need for industrial production of a combined unit for simultaneous application of fertilizers and strip plowing. The issues of implementation of modern foreign tillage technology and devices should primarily consider environmental and resource conditions for row crops cultivation in individual Russian regions. This is especially true for the strip tillage technology and the devices for its implementation. Therefore, further studies should be devoted to the economic component considering the terrain, landscape cover, climatic features, composition and type of soil, land reclamation condition. Due to the current situation, it is essential to gradually replace the imported tillage equipment by domestic developments that are not inferior in quality, reliability, performance and safety to foreign analogues. The authors mean the replacement and repair of expensive foreign produced combined units for strip plowing. To this end, it is suggested to use less expensive domestic technologically new products developed with the consideration of natural and climatic peculiarity of an individual region. The authors apply original methodology of the so-called simplified express analysis of key economic indicators. The methodology provides the opportunity to conduct accurate evaluation of the economic expediency of improving technical characteristics of the upgraded device at the beginning of the design before its production by means of a limited number of available parametric data of the machine sample under study. This eventually influences making a correct decision about the expediency of industrial production of a combined tillage device.
- 2 January 2023
- Published by National University of Science and Technology MISiS in Russian Journal of Industrial Economics
- Vol. 15 (4) , 399-406
Open AccessEconomic justification of industrial production of a resource-saving unit for strip tillage
It is a well-known fact that the existing methods of continuous plow tillage are associated with high consumption of anthropogenic energy for plowing and with probability of occurrence of degradation in it. The alternative to the continuous plowing is non-inversion tillage systems related to resource-saving agriculture. At present, combined tillage implements are widely used. They are equipped with devices for applying fertilizers to plowed strips, and in spring the seeds of a certain row crop (sunflower or corn, for example) are sown there exactly in line with the upgraded seeder equipped with an agronavigator for precision farming. The task of the study is to make the preliminary economic justification of the expediency of using various implements for soil-loosening by strip conservation plowing and the need for industrial production of a combined unit for simultaneous application of fertilizers and strip plowing. The issues of implementation of modern foreign tillage technology and devices should primarily consider environmental and resource conditions for row crops cultivation in individual Russian regions. This is especially true for the strip tillage technology and the devices for its implementation. Therefore, further studies should be devoted to the economic component considering the terrain, landscape cover, climatic features, composition and type of soil, land reclamation condition. Due to the current situation, it is essential to gradually replace the imported tillage equipment by domestic developments that are not inferior in quality, reliability, performance and safety to foreign analogues. The authors mean the replacement and repair of expensive foreign produced combined units for strip plowing. To this end, it is suggested to use less expensive domestic technologically new products developed with the consideration of natural and climatic peculiarity of an individual region. The authors apply original methodology of the so-called simplified express analysis of key economic indicators. The methodology provides the opportunity to conduct accurate evaluation of the economic expediency of improving technical characteristics of the upgraded device at the beginning of the design before its production by means of a limited number of available parametric data of the machine sample under study. This eventually influences making a correct decision about the expediency of industrial production of a combined tillage device.
- Open Access
- 21 December 2021
- Published by MDPI AG in Sustainability
- Vol. 14 (1) , 16
Justification of the Application of Resource-Saving Technology for the Restoration of Metal-Intensive Rear Semi-Axles of Trucks Using Hot Plastic Deformation
The article is devoted to the substantiation of technological foundations for the restoration of extremely worn-out, metal-consuming, and resource-consuming parts, in a method consisting of applying a compensating metal wear with subsequent plastic deformation. Currently, there are no technologies for their restoration in a repair facility that guarantee the resilience of the factory product. The proposed technological process of repair consists of butt welding onto the end of the spline semi-axle shank, compensating for the wear of the metal, the volume of which takes into account the losses resulting from the wear of the slots, as well as allowances for their machining. In the example of forging the axle shaft of a truck’s driving axle, the regularities of the plastic flow of metal during part deformation in the stamp are revealed. In the process of hot volumetric upsetting of long cylindrical parts with a variable diameter, it is important to know the possible directions of metal movements, as well as the energy-power characteristics of the process at various stages of forging. The evaluation criteria of the level of perfection of the technology were indicators of resource conservation and efficiency of the recovery route. The technological direction of the conducted research was analyzed, step by step, from the standpoint of saving repair materials and energy resources. The results of theoretical studies are crucial in the design of die tooling, for the manufacture of blanks, when restoring the rear axle shafts of trucks with pressure. Production tests carried out on the models, obtained as a result of mathematical processing of experimental data, confirmed the reliability of the experimental information. The introduction of the proposed set of repair equipment for the restoration of semi-axles will allow the formation of additional production in the region for the recycling of worn-out metal-intensive steel parts of agricultural machinery.
- 21 December 2021
- Published by MDPI AG in Sustainability
- Vol. 14 (1) , 16
Open AccessJustification of the Application of Resource-Saving Technology for the Restoration of Metal-Intensive Rear Semi-Axles of Trucks Using Hot Plastic Deformation
The article is devoted to the substantiation of technological foundations for the restoration of extremely worn-out, metal-consuming, and resource-consuming parts, in a method consisting of applying a compensating metal wear with subsequent plastic deformation. Currently, there are no technologies for their restoration in a repair facility that guarantee the resilience of the factory product. The proposed technological process of repair consists of butt welding onto the end of the spline semi-axle shank, compensating for the wear of the metal, the volume of which takes into account the losses resulting from the wear of the slots, as well as allowances for their machining. In the example of forging the axle shaft of a truck’s driving axle, the regularities of the plastic flow of metal during part deformation in the stamp are revealed. In the process of hot volumetric upsetting of long cylindrical parts with a variable diameter, it is important to know the possible directions of metal movements, as well as the energy-power characteristics of the process at various stages of forging. The evaluation criteria of the level of perfection of the technology were indicators of resource conservation and efficiency of the recovery route. The technological direction of the conducted research was analyzed, step by step, from the standpoint of saving repair materials and energy resources. The results of theoretical studies are crucial in the design of die tooling, for the manufacture of blanks, when restoring the rear axle shafts of trucks with pressure. Production tests carried out on the models, obtained as a result of mathematical processing of experimental data, confirmed the reliability of the experimental information. The introduction of the proposed set of repair equipment for the restoration of semi-axles will allow the formation of additional production in the region for the recycling of worn-out metal-intensive steel parts of agricultural machinery.
- 8 July 2021
- Published by Ugol Journal Edition LLC in Ugol'
- No. 07
COMPREHENSIVE ASSESSMENT OF SUSTAINABLE DEVELOPMENT OF MINING AND METALLURGICAL HOLDINGS: PROBLEMS AND MECHANISMS OF THEIR RESOLUTION
?????? ?????, ???????? ??????????????, ???????? ???????, ????? ?????? ???????? ???????, ????? ?????? ???????? ??????????????, ??????, ??????, ??????, ?????? ???????, ?????? ?????????, ?????? ??????, ?????? ????????, ??????? ??????? ????, ??????????? ???????? ??????????????, ????????-??????????????, ????????? ??????, ???????? ??????, ??????? ?????????, ??????? ?????????????, ?????? ?????, ???????????? ????????????, ????????????????, ?????????, ????? ????, ??????????? ????, ???????? ????, ????????
- 8 July 2021
- Published by Ugol Journal Edition LLC in Ugol'
- No. 07
COMPREHENSIVE ASSESSMENT OF SUSTAINABLE DEVELOPMENT OF MINING AND METALLURGICAL HOLDINGS: PROBLEMS AND MECHANISMS OF THEIR RESOLUTION
?????? ?????, ???????? ??????????????, ???????? ???????, ????? ?????? ???????? ???????, ????? ?????? ???????? ??????????????, ??????, ??????, ??????, ?????? ???????, ?????? ?????????, ?????? ??????, ?????? ????????, ??????? ??????? ????, ??????????? ???????? ??????????????, ????????-??????????????, ????????? ??????, ???????? ??????, ??????? ?????????, ??????? ?????????????, ?????? ?????, ???????????? ????????????, ????????????????, ?????????, ????? ????, ??????????? ????, ???????? ????, ????????
- 8 February 2021
- Published by Ugol Journal Edition LLC in Ugol'
- No. 2
DIGITAL TRANSFORMATION OF PRODUCTION PROCESSES AND MINING BUSINESS MODELS IN THE CONDITIONS OF MARKET INSTABILITY
- 8 February 2021
- Published by Ugol Journal Edition LLC in Ugol'
- No. 2
DIGITAL TRANSFORMATION OF PRODUCTION PROCESSES AND MINING BUSINESS MODELS IN THE CONDITIONS OF MARKET INSTABILITY
- 30 June 2020
- Published by Ore and Metals Publishing House in CIS Iron and Steel Review
- Vol. 19, 75-80
Relationship between iron ore deposits and spread of heavy metals in shallow water rivers: natural and man-caused factors
This paper describes the results of a study that looked at the effect of natural and human factors related to iron ore deposits on the distribution of heavy metals. A case study of one of the low-water rivers situated in the area of the Kursk-Belgorod Magnetic Anomaly is considered. The study looked at the Oskol river, a typical low-water stream largely susceptible to heavy metal pollution. With the current mining, transportation and waste storage techniques, HMs spread over vast territories carried with dust and waste waters and thus pollute rivers, which in fact accumulate the contaminants. The paper describes the results of zoning of the low-water Oskol river, which is under the impact of various factors caused by iron ore deposits. The zoning was done based on the natural and technogenic features. The research was carried out based on the authors’ method. Hydrochemical anomalies were determined based on ‘Reference Hydrochemical Background’, which is formed on the basis of both natural and human factors. Concentrations of heavy metals significantly increase in the zone of direct impact of mining and steel companies and single-industry cities. This indicates a significant impact of man-caused pollution. The research showed that the low-water Oskol river is highly susceptible and has a low self-purification ability. Heavy metal pollution affects the terrestrial and aquatic ecosystems, ultimately affecting the quality of life and public health. The cropout of ferruginous quartzites with a high iron content, numerous mining and steel sites located in the river basin, the spread of heavy metals with air currents and surface waters over long distances – all this is causing a large-scale pollution. Because of this we cannot expect any real improvement in the next few years. This research was funded through the grant by the Russian Science Foundation, Project No.: 19-18-00025 (the part dedicated to heavy metals and how they spread).
- 30 June 2020
- Published by Ore and Metals Publishing House in CIS Iron and Steel Review
- Vol. 19, 75-80
Relationship between iron ore deposits and spread of heavy metals in shallow water rivers: natural and man-caused factors
This paper describes the results of a study that looked at the effect of natural and human factors related to iron ore deposits on the distribution of heavy metals. A case study of one of the low-water rivers situated in the area of the Kursk-Belgorod Magnetic Anomaly is considered. The study looked at the Oskol river, a typical low-water stream largely susceptible to heavy metal pollution. With the current mining, transportation and waste storage techniques, HMs spread over vast territories carried with dust and waste waters and thus pollute rivers, which in fact accumulate the contaminants. The paper describes the results of zoning of the low-water Oskol river, which is under the impact of various factors caused by iron ore deposits. The zoning was done based on the natural and technogenic features. The research was carried out based on the authors’ method. Hydrochemical anomalies were determined based on ‘Reference Hydrochemical Background’, which is formed on the basis of both natural and human factors. Concentrations of heavy metals significantly increase in the zone of direct impact of mining and steel companies and single-industry cities. This indicates a significant impact of man-caused pollution. The research showed that the low-water Oskol river is highly susceptible and has a low self-purification ability. Heavy metal pollution affects the terrestrial and aquatic ecosystems, ultimately affecting the quality of life and public health. The cropout of ferruginous quartzites with a high iron content, numerous mining and steel sites located in the river basin, the spread of heavy metals with air currents and surface waters over long distances – all this is causing a large-scale pollution. Because of this we cannot expect any real improvement in the next few years. This research was funded through the grant by the Russian Science Foundation, Project No.: 19-18-00025 (the part dedicated to heavy metals and how they spread).
- 20 December 2019
- Published by Ore and Metals Publishing House in CIS Iron and Steel Review
- Vol. 18, 38-41
Use of resource-saving technologies in fabrication and restoration of steel bushing-type components via hot plastic deformation
The article substantiates the expediency of applying the foundations of resource saving in the development of innovative technologies for producing of machine billets hot die forging from worn machine components for the subsequent manufacture of them of new parts in the industrial conditions. Particular emphasis is placed on technologies that provide minimal impact to the environment based on the developed methods of metal processing. The optimal combinations of basic parameters of the process of introducing resource-saving technologies in the repair and maintenance operations are proposed. As an example, the article substantiates possibility of carrying out the process of shaping long tubular forgings from extremely worn thick-walled bushings.
- 20 December 2019
- Published by Ore and Metals Publishing House in CIS Iron and Steel Review
- Vol. 18, 38-41
Use of resource-saving technologies in fabrication and restoration of steel bushing-type components via hot plastic deformation
The article substantiates the expediency of applying the foundations of resource saving in the development of innovative technologies for producing of machine billets hot die forging from worn machine components for the subsequent manufacture of them of new parts in the industrial conditions. Particular emphasis is placed on technologies that provide minimal impact to the environment based on the developed methods of metal processing. The optimal combinations of basic parameters of the process of introducing resource-saving technologies in the repair and maintenance operations are proposed. As an example, the article substantiates possibility of carrying out the process of shaping long tubular forgings from extremely worn thick-walled bushings.
- 20 December 2019
- Published by Ore and Metals Publishing House in Eurasian Mining
- No. 2,p. 70-72
Occupational health and safety digitalization in the coal industry
The article discusses problems of occupational health and safety in coal mines. These problems draw great concern both of the government represented by control and supervision agencies and the owners and management of coal mining companies which realize responsibility of business for safety and comfort of miners at work. Any accident inflicts a heavy economic loss to a mine or a business; moreover, it causes irreparable social damage connected with injuries, hurt to health or mortality. The authors believe the hazardous impact of industrial factors on production performance is much higher in mining than in the other industries for the reason that a mineral deposit is concurrently an object of economic activity and a factor of risk. Therefore, mines are assumed as the hazardous production facilities with high probability of emergency. The occupational health and safety control is specific for its functioning indirectly governs efficiency in a number of business activities of a company: production, commerce, economy, social sphere and ecology. The article reviews operation of one of the leading coal mining companies proposing and introducing advanced digital solutions in occupational health and safety. Mining industry raises high safety standards and, thus, uses many innovations, for example, mobile positioning and control of employees in case of emergency, introduction of the United Automated Control Center information and analysis system, etc. Currently, it is undertaken to change ERP system from SAP NANA Platform to SAP Cloud Platform, which will expand the performance range of the system in all structures of the company.
- 20 December 2019
- Published by Ore and Metals Publishing House in Eurasian Mining
- No. 2,p. 70-72
Occupational health and safety digitalization in the coal industry
The article discusses problems of occupational health and safety in coal mines. These problems draw great concern both of the government represented by control and supervision agencies and the owners and management of coal mining companies which realize responsibility of business for safety and comfort of miners at work. Any accident inflicts a heavy economic loss to a mine or a business; moreover, it causes irreparable social damage connected with injuries, hurt to health or mortality. The authors believe the hazardous impact of industrial factors on production performance is much higher in mining than in the other industries for the reason that a mineral deposit is concurrently an object of economic activity and a factor of risk. Therefore, mines are assumed as the hazardous production facilities with high probability of emergency. The occupational health and safety control is specific for its functioning indirectly governs efficiency in a number of business activities of a company: production, commerce, economy, social sphere and ecology. The article reviews operation of one of the leading coal mining companies proposing and introducing advanced digital solutions in occupational health and safety. Mining industry raises high safety standards and, thus, uses many innovations, for example, mobile positioning and control of employees in case of emergency, introduction of the United Automated Control Center information and analysis system, etc. Currently, it is undertaken to change ERP system from SAP NANA Platform to SAP Cloud Platform, which will expand the performance range of the system in all structures of the company.
- Open Access
- 25 December 2018
- Published by National University of Science and Technology MISiS in Russian Journal of Industrial Economics
- Vol. 11 (4) , 353-358
Formation of intellectual property in the coal industry
Интерес российских и иностранных инвесторов к угольной промышленности достаточно велик. В угольную промышленность России необходимо вкладывать преимущественно те инвестиции, которые относятся к высокоинновационным технологиям и способствуют внедрению инновационных проектов в области геологоразведки, добычи и переработки угля. В первую очередь это касается угольного машиностроения, отдельных направлений в областях обогащения и переработки угля, инновационной активности организации, комплекса мер безопасности и организации добычи угля. Необходимо отметить, что при общей схожести задач направления творческой активности отечественных и иностранных изобретателей значительно разнятся. За рубежом большая часть патентов относится к конструкциям горнодобывающего оборудования с одновременным патентованием способов использования этой конструкции. В России в большей части патентов защищаются способы разработки, предназначенные для применения в специфических условиях определенного месторождения, а также способы использования определенного оборудования в различных условиях. Проведен анализ инновационной активности организаций России в сравнении с инновационной активностью организаций стран ЕС, который показал, что удельный вес организаций, осуществляющих инновации, – технологические, маркетинговые и организационные – значительно ниже, чем в странах Западной Европы. В основном полученные в России патенты, относящиеся к угольной отрасли, направлены на подземные способы разработки угля. Творческая активность отечественных изобретателей направлена в основном на совершенствование способов использования уже имеющейся техники. Частные компании (по добыче и переработке угля) без участия государства не смогут провести модернизацию имеющихся технологий и оборудования в сжатые сроки. В этой связи финансирование инновационных проектов в угольной отрасли должно осуществляться в рамках государственно-частного партнерства по реализации крупных инновационных проектов угольного бизнеса. Патенты дают возможность узнать о текущих исследованиях и существующих технологических заделах компаний различных стран задолго до появления новаторской продукции на рынке и избежать риск авторов разработки для получения патента.
- 25 December 2018
- Published by National University of Science and Technology MISiS in Russian Journal of Industrial Economics
- Vol. 11 (4) , 353-358
Open AccessFormation of intellectual property in the coal industry
Интерес российских и иностранных инвесторов к угольной промышленности достаточно велик. В угольную промышленность России необходимо вкладывать преимущественно те инвестиции, которые относятся к высокоинновационным технологиям и способствуют внедрению инновационных проектов в области геологоразведки, добычи и переработки угля. В первую очередь это касается угольного машиностроения, отдельных направлений в областях обогащения и переработки угля, инновационной активности организации, комплекса мер безопасности и организации добычи угля. Необходимо отметить, что при общей схожести задач направления творческой активности отечественных и иностранных изобретателей значительно разнятся. За рубежом большая часть патентов относится к конструкциям горнодобывающего оборудования с одновременным патентованием способов использования этой конструкции. В России в большей части патентов защищаются способы разработки, предназначенные для применения в специфических условиях определенного месторождения, а также способы использования определенного оборудования в различных условиях. Проведен анализ инновационной активности организаций России в сравнении с инновационной активностью организаций стран ЕС, который показал, что удельный вес организаций, осуществляющих инновации, – технологические, маркетинговые и организационные – значительно ниже, чем в странах Западной Европы. В основном полученные в России патенты, относящиеся к угольной отрасли, направлены на подземные способы разработки угля. Творческая активность отечественных изобретателей направлена в основном на совершенствование способов использования уже имеющейся техники. Частные компании (по добыче и переработке угля) без участия государства не смогут провести модернизацию имеющихся технологий и оборудования в сжатые сроки. В этой связи финансирование инновационных проектов в угольной отрасли должно осуществляться в рамках государственно-частного партнерства по реализации крупных инновационных проектов угольного бизнеса. Патенты дают возможность узнать о текущих исследованиях и существующих технологических заделах компаний различных стран задолго до появления новаторской продукции на рынке и избежать риск авторов разработки для получения патента.