Sanjay Kumar Ghosh
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Research Interests
Sanjay Kumar Ghosh has a total of 36 co-authors. Here are the top co-authors by number of shared publications:
- Vishant Gahlaut
Banasthali Vidyapith
8 shared publications - A. Mercy Latha
Microwave Tubes Division, Council for Scientific and Industrial Research, Central Electronics Engineering Research Institute, Pilani, India
7 shared publications - Chirag Mistry
CSIR-CEERI
2 shared publications - Meenu Kaushik
Banasthali Vidyapith
2 shared publications - Mukesh Kumar Alaria
CSIR-Central Electronics Engineering Research Institute
2 shared publications - Niladri Sarkar
Birla Institute of Technology (BITS), Pilani, Rajasthan, India
2 shared publications
Latest Publications
- Open Access
- 1 November 2026
- Published by AIP Publishing in AIP Advances
- Vol. 16 (11)
Novel design of output waveguide coupler for high-power Ka-band helix traveling wave tube
A novel design of waveguide output coupler for helix traveling wave tubes operating in the Ka-band satellite downlink frequency range has been proposed. To achieve effective RF coupling between the slow-wave structure and the external waveguide, a multi-section impedance transformer approach has been adopted. Quarter-wavelength matching sections, based on transmission-line theory, gradually convert the source impedance to the load characteristic impedance, ensuring maximum power transfer. In contrast to the traditional designs, here, the center conductor dimension has been maintained uniform and the outer conductor dimensions have been modified in each quarter-wavelength coaxial section for smooth impedance transition and effective power coupling. The geometry of the coupler has been systematically analyzed using a 3-D electromagnetic simulator. It has been demonstrated that the designed coaxial coupler to the waveguide coupler, which employs the standard WR-42 waveguide, acts as a high power ∼300 W and low-loss guiding structure. It also helps in avoiding dielectric breakdown and thermal melting because waveguides have no inner conductor as in coaxial couplers. In order to guarantee consistent RF performance under practical operating conditions, extensive geometric sensitivity analysis has been performed on all the geometric parameters, which enables setting the dimensional tolerances during fabrication at acceptable structural deformation levels during the tube operation.
- 1 November 2026
- Published by AIP Publishing in AIP Advances
- Vol. 16 (11)
Open AccessNovel design of output waveguide coupler for high-power Ka-band helix traveling wave tube
A novel design of waveguide output coupler for helix traveling wave tubes operating in the Ka-band satellite downlink frequency range has been proposed. To achieve effective RF coupling between the slow-wave structure and the external waveguide, a multi-section impedance transformer approach has been adopted. Quarter-wavelength matching sections, based on transmission-line theory, gradually convert the source impedance to the load characteristic impedance, ensuring maximum power transfer. In contrast to the traditional designs, here, the center conductor dimension has been maintained uniform and the outer conductor dimensions have been modified in each quarter-wavelength coaxial section for smooth impedance transition and effective power coupling. The geometry of the coupler has been systematically analyzed using a 3-D electromagnetic simulator. It has been demonstrated that the designed coaxial coupler to the waveguide coupler, which employs the standard WR-42 waveguide, acts as a high power ∼300 W and low-loss guiding structure. It also helps in avoiding dielectric breakdown and thermal melting because waveguides have no inner conductor as in coaxial couplers. In order to guarantee consistent RF performance under practical operating conditions, extensive geometric sensitivity analysis has been performed on all the geometric parameters, which enables setting the dimensional tolerances during fabrication at acceptable structural deformation levels during the tube operation.
- 1 October 2026
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Plasma Science
- Vol. 54 (10) , 5111-5117
Miniaturized Conventional Collector for Next-Generation High-Efficiency TWTs
- 1 October 2026
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Plasma Science
- Vol. 54 (10) , 5111-5117
Miniaturized Conventional Collector for Next-Generation High-Efficiency TWTs
- 16 October 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Plasma Science
- Vol. 52 (9) , 4538-4543
Thermal and Structural Analysis of a Fully Integrated Space Traveling Wave Tube
Most of the failures occurring in a traveling wave tube (TWT) are related to thermal and structural issues. Hence, it is very important to critically analyze the thermal and structural aspects under extreme operating conditions to ensure the reliability of space TWTs. It has been a general practice to study the thermal and structural performance of individual sub-assemblies of the TWT, namely the electron gun, coaxial couplers, slow wave structure (SWS), and multistage depressed collector. However, the practical results from the fully integrated tube differ from the results of thermal analyses of individual sub-assemblies by approximately 30%. The main reason behind this discrepancy is due to the elimination of interdependencies between the sub-assemblies, which is completely ignored in the sub-assembly level analyses, and the difference in the boundary conditions. Hence, it is essential to perform the thermal and structural analysis of the entire TWT as a whole instead of individual sub-assemblies. In this article, the authors systematically performed the thermal and structural analysis of a fully integrated tube under actual operating conditions and validated the results with a very close agreement with the experimental results. From the simulation results, it can be observed that the results of the fully integrated tube are in close agreement with the experimentally measured temperature values as opposed to the sub-assembly level simulations.
- 16 October 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Plasma Science
- Vol. 52 (9) , 4538-4543
Thermal and Structural Analysis of a Fully Integrated Space Traveling Wave Tube
Most of the failures occurring in a traveling wave tube (TWT) are related to thermal and structural issues. Hence, it is very important to critically analyze the thermal and structural aspects under extreme operating conditions to ensure the reliability of space TWTs. It has been a general practice to study the thermal and structural performance of individual sub-assemblies of the TWT, namely the electron gun, coaxial couplers, slow wave structure (SWS), and multistage depressed collector. However, the practical results from the fully integrated tube differ from the results of thermal analyses of individual sub-assemblies by approximately 30%. The main reason behind this discrepancy is due to the elimination of interdependencies between the sub-assemblies, which is completely ignored in the sub-assembly level analyses, and the difference in the boundary conditions. Hence, it is essential to perform the thermal and structural analysis of the entire TWT as a whole instead of individual sub-assemblies. In this article, the authors systematically performed the thermal and structural analysis of a fully integrated tube under actual operating conditions and validated the results with a very close agreement with the experimental results. From the simulation results, it can be observed that the results of the fully integrated tube are in close agreement with the experimentally measured temperature values as opposed to the sub-assembly level simulations.
- 5 August 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Electron Device Letters
- Vol. 45 (10) , 1973-1976
Multistage Depressed Collector With Novel Dual Aperture Electrodes for Space Traveling Wave Tubes
Traveling wave tubes (TWTs) employed in communication satellites as power amplifiers have stringent requirements of high efficiency, low weight, compact size, etc. In order to achieve high overall efficiency, the interaction structure is designed for very high electronic efficiency, which, in turn, causes the spent-electron beam to be highly chaotic with wider velocity spread, thereby making the efficient collection of the electron beam a challenge. To address this challenge, the authors have designed a four-stage depressed collector with novel dual aperture electrodes, keeping ease of fabrication in mind. Each electrode is designed with dual taper structures, with each taper section comprising a positive slope structure followed by a zero-slope cylindrical structure. Additionally, the leakage magnetic field from the beam refocusing section has been optimized to achieve maximum collector efficiency without using any additional magnets. As the collector optimization involves many parameters that are non-linearly interdependent, a genetic algorithm-based approach has been employed to attain better results. Further, electrode materials with low secondary electron emission yield have also been explored. Adopting the combination of these approaches – novel geometry modification, employing leakage magnetic field, optimization of collector parameters using genetic algorithm, and using low secondary electron emission yield material has resulted in a high collector efficiency of 85.24%. This offers a significant increase of 5.54% in the collector efficiency as compared to its conventional counterpart, thereby resulting in a tremendous saving in the launch cost of the communication satellite.
- 5 August 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Electron Device Letters
- Vol. 45 (10) , 1973-1976
Multistage Depressed Collector With Novel Dual Aperture Electrodes for Space Traveling Wave Tubes
Traveling wave tubes (TWTs) employed in communication satellites as power amplifiers have stringent requirements of high efficiency, low weight, compact size, etc. In order to achieve high overall efficiency, the interaction structure is designed for very high electronic efficiency, which, in turn, causes the spent-electron beam to be highly chaotic with wider velocity spread, thereby making the efficient collection of the electron beam a challenge. To address this challenge, the authors have designed a four-stage depressed collector with novel dual aperture electrodes, keeping ease of fabrication in mind. Each electrode is designed with dual taper structures, with each taper section comprising a positive slope structure followed by a zero-slope cylindrical structure. Additionally, the leakage magnetic field from the beam refocusing section has been optimized to achieve maximum collector efficiency without using any additional magnets. As the collector optimization involves many parameters that are non-linearly interdependent, a genetic algorithm-based approach has been employed to attain better results. Further, electrode materials with low secondary electron emission yield have also been explored. Adopting the combination of these approaches – novel geometry modification, employing leakage magnetic field, optimization of collector parameters using genetic algorithm, and using low secondary electron emission yield material has resulted in a high collector efficiency of 85.24%. This offers a significant increase of 5.54% in the collector efficiency as compared to its conventional counterpart, thereby resulting in a tremendous saving in the launch cost of the communication satellite.
- 14 December 2023
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Electron Devices
- Vol. 71 (1) , 374-380
Thermal Design and Analysis of Radiation Shield Cooling Assembly for Efficient Heat Dissipation of Space Traveling-Wave Tube
Radiation-cooled helix traveling-wave tube (TWT) is mostly used as a high-power microwave amplifier in satellite communication. The radiation shield assembly has to fit on the multistage depressed collector (MDC) to radiate waste heat into the space environment and demands efficient thermal modeling. In this work, the radiation shield assembly has been designed with a heat dissipation capacity of 100 W. Moreover, the radiation shield assembly has to withstand the mechanical vibration faced during the satellite launching. In this article, the author has proposed a detailed design and analysis of the radiation shield cooling assembly for TWT, aiming to operate both at room and extreme space temperatures. Furthermore, a 1-D analytical model has been proposed for the quick and accurate estimation of the inside temperature of the MDC electrode. The methodology adopted for the design of the radiation shield cooling assembly has been thoroughly discussed. The structure has been simulated using the ANSYS tool, and the simulation results are in close agreement with the analytical results.
- 14 December 2023
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Electron Devices
- Vol. 71 (1) , 374-380
Thermal Design and Analysis of Radiation Shield Cooling Assembly for Efficient Heat Dissipation of Space Traveling-Wave Tube
Radiation-cooled helix traveling-wave tube (TWT) is mostly used as a high-power microwave amplifier in satellite communication. The radiation shield assembly has to fit on the multistage depressed collector (MDC) to radiate waste heat into the space environment and demands efficient thermal modeling. In this work, the radiation shield assembly has been designed with a heat dissipation capacity of 100 W. Moreover, the radiation shield assembly has to withstand the mechanical vibration faced during the satellite launching. In this article, the author has proposed a detailed design and analysis of the radiation shield cooling assembly for TWT, aiming to operate both at room and extreme space temperatures. Furthermore, a 1-D analytical model has been proposed for the quick and accurate estimation of the inside temperature of the MDC electrode. The methodology adopted for the design of the radiation shield cooling assembly has been thoroughly discussed. The structure has been simulated using the ANSYS tool, and the simulation results are in close agreement with the analytical results.
- 4 December 2023
- Published by Taylor & Francis in IETE Journal of Research
- Vol. 70 (7) , 6395-6400
Design and Development of RF Window for Gyro-TWT
- 4 December 2023
- Published by Taylor & Francis in IETE Journal of Research
- Vol. 70 (7) , 6395-6400
Design and Development of RF Window for Gyro-TWT
- 16 November 2022
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Plasma Science
- Vol. 50 (12) , 4843-4847
Practical Thermal and Structural Simulations for Performance Improvement of Electron Gun in TWTs
Low-perveance electron guns are highly desired in high-efficiency space TWTs mainly due to the low operating beam current. In a low-perveance electron gun, the distance between the cathode and beam-forming electrode (BFE) plays a critical role in achieving laminar electron beam flow with the required specifications. It is an extremely sensitive parameter that gets affected by minor variations in the dimensions occurring due to thermal expansion. Hence, thermal and structural simulations are carried out to back-calculate the distance at which the cathode must be placed from the BFE during fabrication under cold conditions. In this article, the authors have presented the development of two electron guns–one developed based on the ideal simulation results and for the other one, the practical brazing conditions were considered in the simulations. Both the guns were integrated with TWTs, and their performances were evaluated under the same operating voltages and magnetic focusing conditions. It has been observed that the electron gun fabricated based on practical simulation conditions performed well with a low helix interception current. In contrast, the other gun had poor performance with a high helix interception current. Hence, it experimentally validates the fact that simulation considering the practical brazing scenario has resulted in precise back-computation of the cathode-BFE distance and hence better beam transmission characteristics of the tube.
- 16 November 2022
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Plasma Science
- Vol. 50 (12) , 4843-4847
Practical Thermal and Structural Simulations for Performance Improvement of Electron Gun in TWTs
Low-perveance electron guns are highly desired in high-efficiency space TWTs mainly due to the low operating beam current. In a low-perveance electron gun, the distance between the cathode and beam-forming electrode (BFE) plays a critical role in achieving laminar electron beam flow with the required specifications. It is an extremely sensitive parameter that gets affected by minor variations in the dimensions occurring due to thermal expansion. Hence, thermal and structural simulations are carried out to back-calculate the distance at which the cathode must be placed from the BFE during fabrication under cold conditions. In this article, the authors have presented the development of two electron guns–one developed based on the ideal simulation results and for the other one, the practical brazing conditions were considered in the simulations. Both the guns were integrated with TWTs, and their performances were evaluated under the same operating voltages and magnetic focusing conditions. It has been observed that the electron gun fabricated based on practical simulation conditions performed well with a low helix interception current. In contrast, the other gun had poor performance with a high helix interception current. Hence, it experimentally validates the fact that simulation considering the practical brazing scenario has resulted in precise back-computation of the cathode-BFE distance and hence better beam transmission characteristics of the tube.
- 26 September 2022
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Electron Device Letters
- Vol. 43 (11) , 1989-1992
Efficiency Enhancement of Multi-Stage Depressed Collector Using an External Magnet in TWTs
The dependence of overall traveling-wave tube (TWT) efficiency on the collector efficiency is of paramount importance. The objective of achieving high overall efficiency drives us to design a multi-stage depressed collector (MDC) with the theoretically highest possible efficiency with appropriate depressed potentials. Various design parameters, namely electrode geometry, depressed potentials, material parameters, etc., can be optimized to attain the desired theoretical maximum collector efficiency. But in a practical situation, the measured MDC efficiency is relatively less than the designed efficiency, which may be attributed to approximations involved in the nonlinear interaction of the electron beam and RF wave, fabrication inaccuracies, process limitations, simulation approximations, etc. This inexplicable practical decrease in MDC efficiency is typically accompanied by an increase in the backstreaming of electrons into the interaction structure. To compensate for this decrease, a permanent magnet has been suitably positioned on the base plate of the MDC, which results in an increase in collector efficiency. Simulation studies have been carried out to optimize the parameters of the magnet in terms of the geometrical dimensions, position, and magnetic field value, and has been validated experimentally. This technique of collector efficiency enhancement using an external magnet has proven to be very effective, contributing to a significant collector efficiency enhancement of > 5% from ~78% to ~83%, which in turn corresponds to an overall tube efficiency improvement of ~5.8% from 50.5% to 56.3%.
- 26 September 2022
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Electron Device Letters
- Vol. 43 (11) , 1989-1992
Efficiency Enhancement of Multi-Stage Depressed Collector Using an External Magnet in TWTs
The dependence of overall traveling-wave tube (TWT) efficiency on the collector efficiency is of paramount importance. The objective of achieving high overall efficiency drives us to design a multi-stage depressed collector (MDC) with the theoretically highest possible efficiency with appropriate depressed potentials. Various design parameters, namely electrode geometry, depressed potentials, material parameters, etc., can be optimized to attain the desired theoretical maximum collector efficiency. But in a practical situation, the measured MDC efficiency is relatively less than the designed efficiency, which may be attributed to approximations involved in the nonlinear interaction of the electron beam and RF wave, fabrication inaccuracies, process limitations, simulation approximations, etc. This inexplicable practical decrease in MDC efficiency is typically accompanied by an increase in the backstreaming of electrons into the interaction structure. To compensate for this decrease, a permanent magnet has been suitably positioned on the base plate of the MDC, which results in an increase in collector efficiency. Simulation studies have been carried out to optimize the parameters of the magnet in terms of the geometrical dimensions, position, and magnetic field value, and has been validated experimentally. This technique of collector efficiency enhancement using an external magnet has proven to be very effective, contributing to a significant collector efficiency enhancement of > 5% from ~78% to ~83%, which in turn corresponds to an overall tube efficiency improvement of ~5.8% from 50.5% to 56.3%.
- 11 January 2022
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Plasma Science
- Vol. 50 (2) , 229-235
Study on Impact of Different Electrode Materials on the Collector Performance in TWTs
Attaining good collector performance in terms of high collector efficiency, low backstreaming, and body interception current has been a prime motive for traveling wave tube (TWT) designers. Selection of appropriate electrode material can result in enhancement of collector performance for the same electrical design (with same electrode potentials and electrode geometry). Here, attempts have been made to quantitatively demonstrate the unexplored impact of electrode material selection on the collector performance systematically. The effect of electrode material on collector efficiency, backstreaming current, body interception current, and their fluctuations arising in a practical scenario due to the variations in input power drives and electrode potentials has been studied. This study has been extended for two different types of TWTs–one with high electronic efficiency and another with medium electronic efficiency at different operating frequencies. Five different electrode materials have been studied with precise recommendations provided for each of the two types of TWTs.
- 11 January 2022
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Plasma Science
- Vol. 50 (2) , 229-235
Study on Impact of Different Electrode Materials on the Collector Performance in TWTs
Attaining good collector performance in terms of high collector efficiency, low backstreaming, and body interception current has been a prime motive for traveling wave tube (TWT) designers. Selection of appropriate electrode material can result in enhancement of collector performance for the same electrical design (with same electrode potentials and electrode geometry). Here, attempts have been made to quantitatively demonstrate the unexplored impact of electrode material selection on the collector performance systematically. The effect of electrode material on collector efficiency, backstreaming current, body interception current, and their fluctuations arising in a practical scenario due to the variations in input power drives and electrode potentials has been studied. This study has been extended for two different types of TWTs–one with high electronic efficiency and another with medium electronic efficiency at different operating frequencies. Five different electrode materials have been studied with precise recommendations provided for each of the two types of TWTs.
- 20 December 2021
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Electron Devices
- Vol. 69 (2) , 771-776
Dispersion Control and Size Enlargement of Helical Slow-Wave Structure by Double-Positive Metamaterial Assistance
A novel dispersion control technique, using I-shaped double-positive metamaterial (MTM) as the helical slow-wave structure (SWS) support, exhibiting low-loss, broadband response, has been proposed for wideband traveling-wave tubes (TWTs). The proposed SWS provided the desired flat-to-negative wideband dispersion characteristics giving higher interaction impedance than that is obtainable by conventional vane-loaded helical SWS. A coaxial transmission line-based simulation model has been used to retrieve the effective relative permittivity and permeability of the I-shaped MTMs. The electromagnetic analysis in the sheath-helix model was validated against the CST Microwave Studio simulation with respect to the dispersion characteristics within 14%–16% and interaction impedance versus frequency characteristics within < 12%. Moreover, the proposed structure can be made to exhibit positive, flat, or negative dispersion characteristics by controlling the dimensions of the I-shaped metal strips without altering the dimensions of the helical SWS and metal envelope of the structure. Furthermore, with the help of the proposed structure, the diameter of the structure could be increased without adversely affecting the shape of the dispersion characteristics and reducing the value of the interaction impedance. The structure will reduce the fabrication complexity at higher frequencies and make the structure suitable for high-power, high-gain, and high-efficiency wideband TWTs.
- 20 December 2021
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Electron Devices
- Vol. 69 (2) , 771-776
Dispersion Control and Size Enlargement of Helical Slow-Wave Structure by Double-Positive Metamaterial Assistance
A novel dispersion control technique, using I-shaped double-positive metamaterial (MTM) as the helical slow-wave structure (SWS) support, exhibiting low-loss, broadband response, has been proposed for wideband traveling-wave tubes (TWTs). The proposed SWS provided the desired flat-to-negative wideband dispersion characteristics giving higher interaction impedance than that is obtainable by conventional vane-loaded helical SWS. A coaxial transmission line-based simulation model has been used to retrieve the effective relative permittivity and permeability of the I-shaped MTMs. The electromagnetic analysis in the sheath-helix model was validated against the CST Microwave Studio simulation with respect to the dispersion characteristics within 14%–16% and interaction impedance versus frequency characteristics within < 12%. Moreover, the proposed structure can be made to exhibit positive, flat, or negative dispersion characteristics by controlling the dimensions of the I-shaped metal strips without altering the dimensions of the helical SWS and metal envelope of the structure. Furthermore, with the help of the proposed structure, the diameter of the structure could be increased without adversely affecting the shape of the dispersion characteristics and reducing the value of the interaction impedance. The structure will reduce the fabrication complexity at higher frequencies and make the structure suitable for high-power, high-gain, and high-efficiency wideband TWTs.