RMRunmei Ma

Runmei Ma

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Runmei Ma has a total of 12 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    Friction and Wear Characteristics of Cr-CNTs Composite Coating End Faces of High-Temperature Mechanical Seals

    by Haichao Yang, Shuangxi Li, Runmei Ma, Guoqing Zhang, An Liu

    To improve the reliability of the end faces of high-temperature mechanical seals, a high-performance composite material that introduces carbon nanotubes (CNTs) into the laser-melted Cr coating is proposed. In this study, for high-temperature and high-speed mechanical seals under actual working conditions, friction and wear tests were conducted under different working conditions and using different end face materials. The high-temperature tribological properties of the Cr-CNTs coatings were analyzed, and the strengthening mechanism of the Cr-CNTs coatings on end faces was investigated. The results indicate that the wear resistance of the Cr-CNTs coating at high temperatures is first enhanced and then weakened with the increase in the CNTs content. The composite coating end face performance is optimal when the CNTs content is 10 wt%. The presence of CNTs between the end faces when grinding against the graphite ring favors the generation of a graphite film. The coefficient of friction of the Cr-CNTs coating is reduced by at least 12.46% compared to the Cr coating at a temperature of 483 K. This study provides reference examples for the application of carbon nanotubes in high-performance mechanical seals and new research ideas for improving the performance of mechanical seal end faces.


  • Open Access

    The Tribological Performance of Metal-/Resin-Impregnated Graphite under Harsh Condition

    by Jun Zhao, Yijiang Liu, Dengyu Liu, Yanfei Gu, Rao Zheng, Runmei Ma, Shuangxi Li, Yongfu Wang, Yijun Shi

    Graphite-based composites are well recognized as ideal functional materials in mechanical seals, bearings of canned pumps, and electrical contact systems because of their outstanding self-lubricating ability, thermostability, and chemical stability. Working in harsh conditions is a huge challenge for the graphite materials, and their tribological properties and wear mechanisms are not well studied. In this study, the tribological performance of metal-impregnated graphite, resin-impregnated graphite, and non-metal-impregnated graphite under high temperature and high load are studied using a ball-on-disc tribometer. The results show that the metal-impregnated graphite (Metal-IG) has a stable friction regime and exhibits better anti-friction and anti-wear properties than that of resin-impregnated graphite (Resin-IG) and non-impregnated graphite (Non-IG) under extreme pressure (200~350 MPa) and high temperature (100–350 °C). The Metal-IG and Resin-IG can reduce the wear depth by 60% and 80%, respectively, when compared with Non-IG substrate. The impregnated materials (metal or resin) can enhance the strength of the graphite matrix and improve the formation of graphite tribofilm on the counterpart surfaces. Friction-induced structural ordering of graphite and slight oxidation of metal in the formed mechanically mixed layer is also beneficial for friction and wear reduction. This study demonstrates the tribological characteristics of impregnated graphite under harsh conditions and provides the experimental basis for the advanced usage of high-reliability and self-lubrication graphite composites.


  • Modeling of Pumping Performance of Labyrinth Screw Pump (LSP) by 2D Reynolds Stress Equations

    by Runmei Ma, Kuisheng Wang

    By using Prandtl’s mixing length theory to model two-dimensional Reynolds stress equations, the pumping performance of a labyrinth screw pump (LSP) is studied and several key parameters are empirically determined. As a result, two innovative concepts, a cell head coefficient Kf and a pump total head coefficient Kb, are proposed. A simple empirical equation quantifying the effects of the main geometric parameters of the threads on the pump performance is obtained and compared with Golubiev’s experimental results (1965, “Studies on Seal for Rotating Shafts of High-Pressure Pumps,” Wear, 8, pp. 270–288; 1981, Labyrinth-Screw Pumps and Seals for Corrosive Media, 2nd ed., Mashinostroenie, Moscow, pp. 34–49). Both theoretical study and Golubiev’s results indicate that with an increase in screw lead, Kf increases while Kb decreases. Kf is inversely proportional to power of screw-sleeve relative diametrical clearance, and the power exponent varies with different shapes of thread. Finally, Kf decreases with an increase in the relative depth of the thread groove over a wide range. Furthermore, some empirical relations between Kf and screw lead, the screw-sleeve relative diametrical clearance and the relative depth of thread groove are fitted, respectively, based on the derived relation between Kf and thread geometric parameters and Golubiev’s experimental data, which would provide a theoretical basis for LSP design.