RKRaphael Kay

Raphael Kay

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Raphael Kay has a total of 23 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    Indoor thermoregulatory homeostasis using hydrodynamic instability

    by Raphael Kay, Ross J. Cocks, Charles Katrycz, J. Alstan Jakubiec, Atalaya Milan Wilborn, Rafiq Omair, Joanna Aizenberg, Benjamin D. Hatton

    Branching patterns can emerge when one fluid is injected into a more viscous one within a quasi-two-dimensional cavity. While these patterns have dazzled physicists for decades, modern engineering efforts have focused on suppressing, rather than leveraging, these flow instabilities. Here, by designing fluidic devices with calibrated geometries, liquid absorptivities, and rheology, we exploit the thermal sensitivity of the Saffman–Taylor instability to achieve thermoregulatory shading systems with self-adjustment capabilities. Our devices produce negative feedback branching patterns that reduce indoor solar heating when warm but increase it when cool. Moreover, compared to existing temperature-responsive shading approaches with fixed thermal behaviors, our system can switch its thermal sensitivity and indoor temperature setpoints on-demand by adjusting the rate that patterns are grown. Experiments and models reveal the energy savings and indoor climate control capabilities enabled by this thermoregulatory framework. Overall, our work provides a blueprint for designing materials with self-regulatory behaviors based on flow instabilities.

  • Open Access

    Self-regulated dual-mode solar energy harvesting

    by Raphael Kay, Rafiq Omair, Joanna Aizenberg

    Traditional solar energy harvesters are single-mode—typically designed to convert available sunlight either into heat or electricity. However, neither energy form is continuously useful, and an optimal variant should instead be capable of autonomously toggling relative thermal and electrical yield based on need. Here, we introduce passive, dual-mode indoor solar energy harvesting by using a fluid layer trapped above a Fresnel lens as a phase-changing switch within a solar waveguide. When warm out and electricity is desired, the fluid is in its vapor phase, causing a refractive index difference with the microstructured lens beneath it to concentrate sunlight toward a solar cell. When cold out and heat is instead desired, the fluid condenses atop the Fresnel structure to reduce refractive index differences, causing sunlight to refract past the solar cell and convert to heat when absorbed indoors. Using water as a phase-changing switch, we built an exemplary system that self-regulates indoor temperature and solar cell light exposure over ambient heating and cooling cycles. Our approach is general across everyday materials and manufacturing methods and may be deployed on the surfaces of vehicles, greenhouses, and residential or commercial buildings.


  • Towards Differentiation in Untethered Microactuators: A Soft Fabrication Strategy

    by Atalaya Milan Wilborn, Hamed Almohammadi, Peiyuan Qu, Yang Wang, Yi Yang, Raphael Kay, DoYoon Kim, Katia Bertoldi, David Weitz, Joanna Aizenberg

    This work describes a microfluidic high‐throughput fabrication method for untethered soft microactuators which, while initially unspecific, develop distinct shapes, surface textures, and actuation modes based on various environmental cues. Analogous to the core concept of cell differentiation, the central idea of this technique is to apply controlled mechanical and chemical stimuli to a deformable hydrogel fiber and transmit the induced geometrical and textural changes to embedded droplets. Using liquid crystal (LC) monomer droplets as a core allows us to orthogonally program the geometric, textural, and molecular architecture of the resulting microactuators upon droplet polymerization. Fine‐tuning of the microfluidic parameters yields microdroplets that dry and transform into microparticles with a variety of shapes, including spindle, rod, pancake, dumbbell, pyramid, and worm‐like assemblies with a range of aspect ratios. Leveraging mechanical instability via rapid dehydration of hydrogel fibers allows us to generate and impart stable 3D patterns to the core, resulting in microparticles that vary both in global shape and surface texture. After polymerizing these precursor droplets in a magnetic field to encode the mesogenic orientation, LCE microactuators are realized with a rich library of shapes, surface patterns, and molecular structures, each displaying distinct deformations upon heating, validated via finite element analysis.


  • Open Access

    Multilayered optofluidics for sustainable buildings

    by Raphael Kay, J. Alstan Jakubiec, Charlie Katrycz, Benjamin D. Hatton

    Indoor climate control is among the most energy-intensive activities conducted by humans. A building facade that can achieve versatile climate control directly, through independent and multifunctional optical reconfigurations, could significantly reduce this energy footprint, and its development represents a pertinent unmet challenge toward global sustainability. Drawing from optically adaptive multilayer skins within biological organisms, we report a multilayered millifluidic interface for achieving a comprehensive suite of independent optical responses in buildings. We digitally control the flow of aqueous solutions within confined milliscale channels, demonstrating independent command over total transmitted light intensity (95% modulation between 250 and 2,500 nm), near-infrared-selective absorption (70% modulation between 740 and 2,500 nm), and dispersion (scattering). This combinatorial optical tunability enables configurable optimization of the amount, wavelength, and position of transmitted solar radiation within buildings over time, resulting in annual modeled energy reductions of more than 43% over existing technologies. Our scalable “optofluidic” platform, leveraging a versatile range of aqueous chemistries, may represent a general solution for the climate control of buildings.


  • Open Access

    Decapod-inspired pigment modulation for active building facades

    by Raphael Kay, Charlie Katrycz, Kevin Nitièma, J. Alstan Jakubiec, Benjamin D. Hatton

    Typical buildings are static structures, unable to adjust to dynamic temperature and daylight fluctuations. Adaptive facades that are responsive to these unsteady solar conditions can substantially reduce operational energy inefficiencies, indoor heating, cooling, and lighting costs, as well as greenhouse-gas emissions. Inspired by marine organisms that disperse pigments within their skin, we propose an adaptive building interface that uses reversible fluid injections to tune optical transmission. Pigmented fluids with tunable morphologies are reversibly injected and withdrawn from confined layers, achieving locally-adjustable shading and interior solar exposure. Multicell arrays tiled across large areas enable differential and dynamic building responses, demonstrated using both experimental and simulated approaches. Fluidic reconfigurations can find optimal states over time to reduce heating, cooling, and lighting energy in our models by over 30% compared to current available electrochromic technologies.


  • Shape-programmable fluid bubbles for responsive building skins

    by Raphael Kay, Kevin Nitièma, Charlie Katrycz, J. Alstan Jakubiec, Nicholas Hoban, Benjamin D. Hatton


  • Open Access

    Programmable droplets: Leveraging digitally-responsive flow fields to actively tune liquid morphologies

    by Raphael Kay, Charlie W. Katrycz, Ethan J. Heimlich, Benjamin D. Hatton

    Stimulus-responsive materials enable programmable and adaptive behaviors. Typical solid-phase systems can only achieve small deformations for applications where shape transformations are beneficial or required. Liquids, in contrast, can self-assemble and achieve very high strains in a multifluid environment. Here we report liquid droplet formation by tuning flow potential within a confined fluidic cell. We digitally inject small volumes of liquid-pigment into an otherwise-transparent liquid layer, generating macroscopic droplet assembly over large areas constrained between closely-spaced plates. Droplet morphology is actively controlled by modulating outlet conditions to tune flow fields. Pattern stability is maintained through control over injection rate, interfacial viscosity difference, and interfacial surface tension. We demonstrate time-dependent droplet formation and migration to achieve spatially-tunable optical properties. Applied as a multi-cell array, we imagine this liquid mechanism will enable scalable pattern dynamics for active shading and visual display technologies.


  • Open Access

    Stepwise slime mould growth as a template for urban design

    by Raphael Kay, Anthony Mattacchione, Charlie Katrycz, Benjamin D. Hatton

    The true slime mould, Physarum polycephalum, develops as a vascular network of protoplasm, connecting node-like sources of food in an effort to solve multi-objective transport problems. The organism first establishes a dense and continuous mesh, reinforcing optimal pathways over time through constructive feedbacks of protoplasmic streaming. Resolved vascular morphologies are the result of an evolutionarily-refined mechanism of computation, which can serve as a versatile biological model for network design at the urban scale. Existing digital Physarum models typically use positive reinforcement mechanisms to capture meshing and refinement behaviours simultaneously. While these automations generate accurate descriptions of sensory and constructive feedback, they limit stepwise design control, reducing flexibility and applicability. A model that decouples the two “phases” of Physarum behaviour would enable multistage control over network growth. Here we introduce such a system, first by producing a site-responsive mesh from a population of nutrient-attracted agents, and then by independently calculating from it a flexible, proximity-defined shortest-walk to produce a final network. We develop and map networks within existing urban environments that perform similarly to those biologically grown, establishing a versatile tool for bio-inspired urban network design.