VHVolodymyr Hryshchenko

Volodymyr Hryshchenko

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Volodymyr Hryshchenko has a total of 22 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    Pattern Identification and Modeling of Energy-Efficient Operating Modes in Grain Micronization

    by Roman Kalinichenko, Boris Kotov, Vasyl Lukach, Serhii Stepanenko, Alvian Kuzmych, Viacheslav Gerasymenko, Volodymyr Hryshchenko, Anatoly Kushnirenko, Yurii Borkhalenko

    The article addresses the critical issue of improving the energy efficiency of grain processing using thermo-radiation micronization. The research aims to substantiate energy-efficient processing modes that ensure increased equipment productivity while simultaneously reducing specific energy consumption. To achieve this goal, an improved mathematical model that describes complex heat and moisture transfer processes in grain during intensive infrared (IR) irradiation was developed. Based on direct experimental data, the model’s parameters were identified, enabling adaptation to real-world production conditions. The article proposes a simplified mathematical description of the patterns of raw material heating and dehydration suitable for engineering calculations. Special attention was paid to the analysis and modeling of oscillating modes, which involved alternating IR irradiation with periods of grain cooling by airflow. It was also demonstrated that such an approach allows for intensifying moisture removal without overheating the product. The research results provide a basis for implementing the oscillating mode as cyclic-pulse irradiation with intermediate forced cooling. This approach is the most effective, as it ensures moisture removal with 20–30 % less energy consumption and reduces surface overheating compared to continuous IR irradiation.


  • Open Access

    Implementation of energy-saving modes for electro-radiation drying of oil-containing material using automation tools

    by Borys Kotov, Roman Kalinichenko, Serhii Stepanenko, Vasyl Lukach, Volodymyr Hryshchenko, Alvian Kuzmych, Yurii Pantsyr, Ihor Garasymchuk, Volodymyr Vasylyuk

    For industrial processing of oil-containing plant material, it is necessary to reduce its moisture content to 6–8%. The use of convective, energy-intensive dryers for drying seeds to low moisture levels is inefficient. The aim of the work is to improve the mathematical description of dynamic modes of grain drying in infrared energy supply systems and, based on this, to develop an automatic control system. The main method of researching the static and dynamic characteristics of the grain processing process using infrared radiation is the analytical method followed by experimental verification of the obtained mathematical description. To intensify the process of achieving the desired moisture content of the raw material, it is proposed to use contactless heating with infrared radiation. In this case, the issue of preventing overheating and scorching of the material is resolved by using vibration transportation with particle mixing and automating surface temperature control and its stabilization by adjusting the movement speed. Based on the dependencies, it can be concluded that an increase in the temperature of the grain due to distributed power input enhances the intensity of heating and stabilizes the temperature of the grain material. This leads to a reduction in the time required for the development of moisture gradients within individual grains and speeds up the evaporation of moisture from the surface of the grains. The paper clarifies the mathematical model of thermal processes of infrared processing of oilseeds, on the basis of which an automatic control system was developed for the implementation of energy-saving grain drying modes. The research results showed that the introduction of an automated infrared drying mode allows for a reduction in specific energy consumption by 30-40%.


  • Analysis of Vibro-Pneumatic Separation Processes of Grain Materials in the Context of Control Objectives

    by Borys Kotov, Valentyn Myronenko, Serhii Pohorylyi, Volodymyr Hryshchenko, Yurii Pantsyr

    Borys Kotov, Doctor of Technical Sciences, Professor of the Department of Agricultural Engineering and Systems Engineering, Podilskyi State University, Ukraine, ORCID: https://orcid.org/0000-0001- 6369-3025, e-mail: eetsapk@pdatu.edu.ua. Valentyn Myronenko, Doctor of Technical Sciences, Professor, Head of the Department of Agronavigation and Automation of Mobile Processes, Institute of Mechanics and Automation of Agroindustrial Production, National Academy of Agrarian Sciences of Ukraine, ORCID: https://orcid.org/0000-0002-1227-2471, e-mail: mironenko1952@ukr.net Serhii Pohorylyi, Deputy Director for Scientific Work, Doctor of Technical Sciences, Senior Researcher, Head of the Department of Mobile Energy, Institute of Mechanics and Automation of Agroindustrial Production, National Academy of Agrarian Sciences of Ukraine, ORCID: https://orcid.org/0000-0002-9701-2678, e-mail: pogorilyy_sergiy@ukr.net Volodymyr Hryshchenko, Candidate of Technical Sciences, Senior Lecturer of the Department of Automation and Robotic Systems named after Academician I.I. Martynenko, National University of Life and Environmental Sciences of Ukraine, ORCID: https://orcid.org/0000-0001-7789-3650, e-mail: vlgr@nubip.edu.ua Yurii Pantsyr, Candidate of Technical Sciences, Associate Professor, Dean of the Faculty of Engineering and Technology, Podilskyi State University, Ukraine, ORCID: https://orcid.org/0000-0003- 2969-1936, e-mail: panziryuriy@gmail.com The aim of the study is to determine the influence of kinematic and aerodynamic parameters on the movement of particles in a vibro-pneumatically fluidized layer and along an oscillating supporting surface. This work addresses the enhancement of separation efficiency of grain materials in vibro-pneumatic separators by employing pulsating airflow and implementing a dual-loop automated control system for regulating separation parameters. It has been established that particle motion and stratification within the grain layer exhibit a probabilistic and statistical nature, which complicates the maintenance of stable and efficient operating modes in conventional screen-air cleaning systems. A regulation approach is proposed, involving coordinated variation of oscillation frequency of the working surface and airflow parameters, which enables intensification of stratification in the grain mass and improves separation accuracy based on aerodynamic properties and specific weight. The analysis of experimental results demonstrates that the application of pulsating airflow significantly increases the divergence of particle trajectories for lighter and heavier fractions, thereby reducing their recombination prior to entering the pneumatic channel. This approach results in a 40–48% improvement in the efficiency of preliminary grain material separation compared to conventional systems utilizing horizontal, inclined, or vertical pneumatic ducts. Theoretical investigations substantiate the effect of kinematic and aerodynamic regimes on the particle settling velocity, which is a critical parameter for effective stratification. It is shown that increasing the oscillation frequency enhances the transport velocity of the grain layer along the supporting surface, while increased airflow rate has an inverse effect. This mutual interaction underlines the necessity of employing a dual-loop control system to optimize the separation process. The research findings can be utilized in the design of new or modernization of existing vibro-pneumatic separators, aiming to improve throughput, final product quality, and energy efficiency in grain cleaning operations.

  • Theoretical study of a flow-through humidifier with a rotary water spray

    by V. O. Hryshchenko, B. I. Kotov, S. P. Stepanenko

    Purpose. To formulate a mathematical description of the process of air humidification in a flow-through apparatus with a rotary water sprayer (as an automation object). Methods. The analytical method of research is applied, which is based on determining the dynamic characteristics of heat and mass transfer processes during the interaction of water droplets with an airflow. Results. A mathematical description of the dynamics of a flowing air humidifier with a rotary water sprayer is formulated as a mathematical model of the unsteady mode of heat and mass transfer of sprayed water with an air stream and a mathematical model of the movement of a droplet as a material particle in a vertical uneven air flow. The trajectories of the droplets in the air flow are determined and the air humidification graphs are obtained. The obtained solution to the system of equations allows us to determine the influence of design and operating parameters on the dynamic properties of the air humidifier. Conclusions 1. A dynamic mathematical model of heat and mass transfer in a flow-through apparatus of ideal mixing has been developed. 2. The analytical dependences of the change in air parameters in time on the operating and design parameters of the apparatus were obtained. 3. The kinetic parameters of the droplet motion are determined. Keywords: air flow, droplet, humidifier, rotary disk, heat transfer, moisture content.

  • Mathematical model of system dynamics for heat utilization from ventilation emissions with intermediate heat carrier as an object of automation

    by B. I. Kotov, V. O. Hryshchenko, S. P. Stepanenko, Y. I. Pantsir, I. D. Gerasimchuk

    Annotation Purpose. Formulation of a mathematical description of the non-stationary thermal regime of the heat utilization system of ventilation emissions on the basis of a heat exchanger with an intermediate heat carrier for industrial premises. Methods. The specificity of the object under study determines the analytical method of research, which is based on the analysis of the thermal balance of the elements of the studied system and the heat and energy connections between them. Results. A mathematical description of the dynamics of the thermal process in a recuperative heat recovery unit with an intermediate heat carrier is formulated taking into account the variable parameters of ventilation air, both exhaust and supply air and the presence of condensation on the surface of the heat exchanger. Given the possibility of automatic control of the operation of the disposal system by changing the flow of intermediate coolant (which makes the system of equations nonlinear), a linearized mathematical model of the dynamics of the studied system is proposed. Conclusions 1. The obtained mathematical models allow to determine the dynamic characteristics of the system of waste heat utilization in transient modes, as well as to evaluate the efficiency of the system itself and to optimize the parameters of heat exchangers. 2. The linearized model of the thermal utilizer allows to synthesize the system of automatic control of the operating mode and to investigate its parameters. Keywords: waste heat utilization, heat exchanger recuperator, intermediate heat carrier, dynamic mode, mathematical model, production room.

  • Mathematical Model of Heat Pump Cooling System of Material After Drying and Heat Treatment

    by Boris Kotov, Podillsky State Agrarian and Technical University (PDATU), Roman Kalinichenko, Yuri Pantsir, Igor Gerasimchuk, Volodymyr Hryshchenko, Separated subdivision of NUBiP of Ukraine «Nizhin Agrotechnical Institute», State Agrarian and Engineering Universityin Podilya, National University of Life and Environmental Sciences of Ukraine

    Boris Kotov, Professor, Doctor in Technics (Doctor of Technics Sciences), Podillsky State Agrarian and Technical University (PDATU), Kamyanets-Podilsky, Ukraine, ORCID ID: 0000-0001-6369-3025 Roman Kalinichenko, Associate Professor, PhD in Technics (Candidate of Technics Sciences), Separated subdivision of NUBiP of Ukraine «Nizhin Agrotechnical Institute», Nizhin, Ukraine, ORCID ID: 0000-0001-9325-1551 Yuri Pantsir, Associate Professor, PhD in Technics (Candidate of Technics Sciences), State Agrarian and Engineering Universityin Podilya, Kamyanets-Podilsky, Ukraine, ORCID ID: 0000-0003-2969-1936 Igor Gerasimchuk, Associate Professor, PhD in Technics (Candidate of Technics Sciences), State Agrarian and Engineering Universityin Podilya, Kamyanets-Podilsky, Ukraine, ORCID ID: 0000-0002-4304-4447 Volodymyr Hryshchenko, PhD in Technics (Candidate of Technics Sciences), National University of Life and Environmental Sciences of Ukraine, Kiev, Ukraine, ORCID ID: 0000-0001-7789-3650 Abstract The article considers the issue of increasing the efficiency of coolers of the material heated during drying by using a heat pump unit to produce artificial cold. The scheme of use of a thermal pump in a complex with the drying installation and the portable cooler of material is offered. A mathematical description of the stationary modes of operation of the drying unit, material cooler and heat pump elements on the basis of a steam compressor refrigeration unit is formulated. At creation of physical and mathematical models of heat and mass transfer in the course of drying and cooling of material (grain) the following conditions are accepted simplifying the mathematical description, but without changing real process: moisture from the material is removed according to Dalton's evaporation law, while the moisture in the material evaporates and is removed simultaneously; moisture content and temperature in the volume of the material are evenly distributed, heat and mass transfer occurs only between the surface of the material and the drying agent; the effects of radiation and contact heat transfer are taken into account by heat transfer coefficients; stationary fields of temperature and moisture content are assumed to be one-dimensional, which vary according to the coordinate calculated in the direction of movement of the material; when cooling the moisture removal material is not taken into account for low residual moisture; the size of the surface of the material in the process of drying and cooling does not change; the heat exchange equipment of the heat pump is an object with concentrated parameters. Using the obtained mathematical dependences, graphical dependences of changes in grain and air temperature are constructed, which allow to evaluate the expediency of using a heat pump. The formulated mathematical model of stationary modes of the heat pump drying unit with artificial cooling of the dried material can be used to evaluate the feasibility and energy efficiency of the used refrigeration machines for grain cooling, especially after high-temperature processing. The obtained analytical dependences in the form of a closed system of equations can be used to optimize the parameters of the heat pump drying unit by the criterion of minimizing energy consumption. Keywords drying unit, material cooler, heat pump, compressor, condenser, air cooler Full Text: PDF References Stankevich, G.N., Shapovalenko, O.I., Strahova, T.V., Petrunja, B.M., Jakovenko, A.I. & Ostapchuk, M.V. et al. (1997). Instrukcija po sushke prodovol'stvennogo, kormovogo zerna, semjan maslichnyh kul'tur i jekspluatacii zernosushilok [Instructions for drying food, feed grains, oilseeds and operation of grain dryers]. Odesa: “ARD-LTD” [in Russian]. Kurhans'kyj, O.D. & Kotov, B.I. (2016). Analiz sposobiv okholodzhennia zernovoho materialu [The analysis of the grain material cooling ways]. Tekhnika, enerhetyka, transport APK – Engineering, Energy, Transport AIC, 2(94), 49– 52 [in Ukrainian]. Kotov, B.I., Kalinichenko, R.A. & Kurhans'kyj, O.D. (2017). Teplo i masoobmin pry sushinni i okholodzhenni zernovoho materialu u schil'nomu rukhomomu shari [Heat and mass transfer in drying and cooling]. Tekhnika, enerhetyka, transport APK – Engineering, Energy, Transport AIC, 1, 93–95 [in Ukrainian]. Kotov, B.I., Kalinichenko, R.A., Kurhanskyj, O.D., Stepanenko, S.P. & Shvydia, V.O.. (2016). Teoretychni doslidzhennia protsesu okholodzhennia zernovoho materialu pry peremischenni u vibrovidtsentrovomu shari [Theoretical research the cooling process of grain material when moving in layer vibrocentrifugal]. Konstrujuvannja, vyrobnyctvo ta ekspluatacija silʹsʹkohospodarsʹkyx mashyn – Design, manufacture and operation of agricultural machinery, Vol. 46, 54-60 [in Ukrainian]. Kalinichenko, R.A. & Kotov, B.I. (2018). Matematychne modeliuvannia statsionarnykh rezhymiv ustanovok dlia okholodzhennia i nahrivu dyspersnykh sil's'kohospodars'kykh materialiv [Mathematical modeling of stationary modes of installations for cooling and heating of dispersed agricultural materials]. Mekhanizatsiia ta elektryfikatsiia sil's'koho hospodarstva – Mechanization and electrification of agriculture, Vol. 8, 97–104 [in Ukrainian]. B.I. Kotov, R.A. Kalinichenko, A.V. Rud', S.M. Hrushets'kyj (2021). Vyznachennia shliakhiv pidvyschennia efektyvnosti okholodzhennia zerna pislia susharok i termoobrobok [Increase the efficiency of grain cooling after drying and heat treatment]. Tekhnika, enerhetyka, transport APK – Engineering, Energy, Transport AIC, 2(13), 111– 120 [in Ukrainian]. Altuhova, T.A. & Shuhanov, S.N. (2013). Jeksperimental'nye issledovanija raboty vihrevogo ohladitelja zerna s pomoshh'ju polnofaktornogo jeksperimenta [Experimental studies of the operation of a vortex grain cooler using a full-factorial experiment]. Vestnik AltGAU – Bulletin of AltSPU, 9, 99–102 [in Russian]. Stankevich, G.N.,...

  • Justification of the layout and operating mode of a vortex-dedusting device as part of heat recovery units in agro-industrial facilities

    by B. I. Kotov, V. O. Hryshchenko, S. M. Hrushetskiy, A. V. Rud

    Annotation Purpose. Determination of the efficiency of functioning of the centrifugal dust collector of exhaust ventilation air when supplied to the heat exchanger, and the parameters of the dedusting device. Methods. The specificity of the problem being solved determines the use of an analytical method for research, which allows us to consider the general scheme of the process flow, without specifying the dimensional characteristics. The research technique involves the compilation of differential equations of the motion of particles in a swirling air flow and determination of the trajectory of their movement. Results. The possibility and feasibility of using a direct-flow cyclone for dedusting ventilation emissions from an industrial premises before feeding to a heat recovery unit is considered. To assess the efficiency of dust cleaning, a mathematical description of the dynamics of motion of dust particles in a vortex flow of a direct-flow cyclone has been formulated. Analytical dependences are obtained, according to which the trajectories of motion of dust particles in projections onto the transverse and longitudinal planes of the cyclone body are calculated. The formulas obtained make it possible to determine the design and operating parameters of the dedusting device and to estimate the size of particles, the capture of which is provided by the proposed device. Conclusions 1. A rational layout diagram of a heat recovery system for ventilation air of industrial facilities has been determined, which in series connects a once-through cyclone with an impeller and a tube-plate heat exchanger. 2. A mathematical description of the dynamics of the motion of dust particles in a vortex flow has been formulated and investigated, and calculation formulas have been obtained for calculating the trajectories of motion of particles, which are used to determine the design and operating parameters of a direct-flow dust cleaner. Keywords: ventilation emissions, heat exchanger, dedusting of the air flow, direct-flow cyclone, particle trajectories.