Yuanxiang Sun
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Yuanxiang Sun has a total of 29 co-authors. Here are the top co-authors by number of shared publications:
- Zhenbin Zhang
Shandong University
12 shared publications - Dehao Kong
Chair of High-Power Converter Systems, Technical University of Munich, Mnchen, Germany
7 shared publications - Marcelo Lobo Heldwein
Technical University of Munich
7 shared publications - Zhen Li
School of Electrical Engineering, Shandong University, Jinan 250061, China
5 shared publications - Han He
School of Electrical Engineering, Shandong University, Jinan, China
4 shared publications - Yongdu Wang
Chair of High-Power Converter Systems, Technical University of Munich, Mnchen, Germany
4 shared publications
Latest Publications
- 1 October 2026
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Industrial Electronics
- Vol. 73 (10) , 14713-14724
A Trajectory-Optimized Predictive Control for Power Converters
- 1 October 2026
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Industrial Electronics
- Vol. 73 (10) , 14713-14724
A Trajectory-Optimized Predictive Control for Power Converters
- 24 October 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Industrial Electronics
- Vol. 73 (2) , 2184-2195
An Efficient Predictive Control for Cascaded H-Bridge Static Var Generator
Direct model predictive control (DMPC) effectively integrates multiobjective control and modulation processes into a single stage while handling constraints. However, the classical DMPC method faces computational challenges in cascaded H-bridge static var generator (CHB-SVG) due to the exponential growth of finite control sets. This work proposes an efficient DMPC method for CHB-SVG constructed by three stages: current tracking, phase voltage balancing, and module voltage balancing. The current tracking optimization stage is reformulated as Euclidean distance minimization and solved in a 120${}^{\circ}$ coordinate system. Analytical solution for optimal voltage levels is derived to ensure phase voltages equilibrium. Complementary switching states are introduced within the module voltage balancing stage, improving voltages balancing performance. This approach effectively reduces the complexity of the current and phase voltage balance control from untraceable polynomial time to a constant executable time. Both simulation and experimental results confirm the effectiveness of the proposed method.
- 24 October 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Industrial Electronics
- Vol. 73 (2) , 2184-2195
An Efficient Predictive Control for Cascaded H-Bridge Static Var Generator
Direct model predictive control (DMPC) effectively integrates multiobjective control and modulation processes into a single stage while handling constraints. However, the classical DMPC method faces computational challenges in cascaded H-bridge static var generator (CHB-SVG) due to the exponential growth of finite control sets. This work proposes an efficient DMPC method for CHB-SVG constructed by three stages: current tracking, phase voltage balancing, and module voltage balancing. The current tracking optimization stage is reformulated as Euclidean distance minimization and solved in a 120${}^{\circ}$ coordinate system. Analytical solution for optimal voltage levels is derived to ensure phase voltages equilibrium. Complementary switching states are introduced within the module voltage balancing stage, improving voltages balancing performance. This approach effectively reduces the complexity of the current and phase voltage balance control from untraceable polynomial time to a constant executable time. Both simulation and experimental results confirm the effectiveness of the proposed method.
- 19 May 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Power Electronics
- Vol. 40 (9) , 13965-13976
Integrated Model Predictive Control of Double-Stage Solid-State Transformers With Dynamic Reference
The dc-link voltage control is crucial for double-stage solid-state transformers. Due to differences in bandwidth and response speed between the two stages, overvoltage and undervoltage may occur in transient states, potentially leading to overmodulation in the rectifier stage and overcurrent in the dc stage. In extreme cases, the reliable operation of the entire system is threatened. Model predictive control (MPC) methods have been utilized to improve the dynamic performance of the dc-link in some previous works. However, they mainly work as the inner loop. While the inner loop is indeed enhanced, the overall dynamic remains limited by the employment of linear controllers in the outer voltage loop. To address this issue, this article proposes an integrated MPC with dynamic reference generation. Herein, the integrated cost functions for both stages account for all relevant variables. Following with it, the dynamic reference method generates real-time commands for the dc-link based on load estimation, eliminating the need for linear controllers in the outer loop. The response speed of the MPC is fully released, significantly improving the dynamic performance of the dc-link while maintaining a straightforward implementation. Finally, the experimental comparisons with other schemes verify the effectiveness and superiority of the proposed method.
- 19 May 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Power Electronics
- Vol. 40 (9) , 13965-13976
Integrated Model Predictive Control of Double-Stage Solid-State Transformers With Dynamic Reference
The dc-link voltage control is crucial for double-stage solid-state transformers. Due to differences in bandwidth and response speed between the two stages, overvoltage and undervoltage may occur in transient states, potentially leading to overmodulation in the rectifier stage and overcurrent in the dc stage. In extreme cases, the reliable operation of the entire system is threatened. Model predictive control (MPC) methods have been utilized to improve the dynamic performance of the dc-link in some previous works. However, they mainly work as the inner loop. While the inner loop is indeed enhanced, the overall dynamic remains limited by the employment of linear controllers in the outer voltage loop. To address this issue, this article proposes an integrated MPC with dynamic reference generation. Herein, the integrated cost functions for both stages account for all relevant variables. Following with it, the dynamic reference method generates real-time commands for the dc-link based on load estimation, eliminating the need for linear controllers in the outer loop. The response speed of the MPC is fully released, significantly improving the dynamic performance of the dc-link while maintaining a straightforward implementation. Finally, the experimental comparisons with other schemes verify the effectiveness and superiority of the proposed method.
- 12 November 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Industrial Electronics
- Vol. 72 (6) , 5936-5947
Consensus-Based Distributed Control of Offshore Wind Farms Connected via DR-HVDC
In offshore wind farms connected via diode-rectifier-based high-voltage dc systems, conventional distributed control strategies of wind turbine (WT) converters suffer from significant coupling between active and reactive power and frequency, leading to large oscillations in WT power and offshore frequency during transients. Upon theoretically analyzing this issue using a small-signal model, this work proposes a novel distributed control strategy to address it. Initially, we propose a specially designed consensus-based global average reactive power observer for each local WT controller, where the consensus algorithm is modified from its basic form to support an adjustable reactive power-sharing ratio. By comparing the observed and actual values of reactive power, a dynamically adjustable virtual impedance control is achieved, completely decoupling active and reactive power control. In addition, global reactive power values are also used in frequency droop control as local references, decoupling reactive power and frequency control while achieving proportional reactive power-sharing. Experimental results confirm that the proposed solution eliminates transient oscillations of reactive power and frequency compared to existing conventional and decoupled control methods.
- 12 November 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Industrial Electronics
- Vol. 72 (6) , 5936-5947
Consensus-Based Distributed Control of Offshore Wind Farms Connected via DR-HVDC
In offshore wind farms connected via diode-rectifier-based high-voltage dc systems, conventional distributed control strategies of wind turbine (WT) converters suffer from significant coupling between active and reactive power and frequency, leading to large oscillations in WT power and offshore frequency during transients. Upon theoretically analyzing this issue using a small-signal model, this work proposes a novel distributed control strategy to address it. Initially, we propose a specially designed consensus-based global average reactive power observer for each local WT controller, where the consensus algorithm is modified from its basic form to support an adjustable reactive power-sharing ratio. By comparing the observed and actual values of reactive power, a dynamically adjustable virtual impedance control is achieved, completely decoupling active and reactive power control. In addition, global reactive power values are also used in frequency droop control as local references, decoupling reactive power and frequency control while achieving proportional reactive power-sharing. Experimental results confirm that the proposed solution eliminates transient oscillations of reactive power and frequency compared to existing conventional and decoupled control methods.
- 22 August 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Power Electronics
- Vol. 40 (1) , 1925-1935
Model-Free Predictive Control Based on Data-Driven for Fast and Accurate Power Allocation in Solid-State DC Transformers
Robustness is a crucial issue in model predictive control despite the excellent dynamic performance and effective management of multiple variables that this control strategy provides for converters. This challenge is particularly concerning in solid-state dc transformers (DCT) connected as input-series-output-parallel modules because this type of DCT not only regulates the output voltage/power but also balances the input voltage so that the power is averagely distributed among submodules. Static errors and limited dynamics pose a threat to their operation and even safety. To tackle this issue, this article proposes a novel model-free predictive control based on an autoregressive moving average structure. Herein, the physical model of DCTs is completely replaced by a data-driven model. Combined with the recursive least square method with the forgetting factor, the control system will no longer rely on the electrical parameters, guaranteeing strong robustness. Meanwhile, an adaptive balance controller is also proposed, which adjusts the gain of shift angles with reduced computational burden. These achieve accurate power/voltage allocation among all submodules while maintaining a fast dynamic response. The experimental comparisons with other schemes verify the effectiveness and superiority of the proposed method.
- 22 August 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Power Electronics
- Vol. 40 (1) , 1925-1935
Model-Free Predictive Control Based on Data-Driven for Fast and Accurate Power Allocation in Solid-State DC Transformers
Robustness is a crucial issue in model predictive control despite the excellent dynamic performance and effective management of multiple variables that this control strategy provides for converters. This challenge is particularly concerning in solid-state dc transformers (DCT) connected as input-series-output-parallel modules because this type of DCT not only regulates the output voltage/power but also balances the input voltage so that the power is averagely distributed among submodules. Static errors and limited dynamics pose a threat to their operation and even safety. To tackle this issue, this article proposes a novel model-free predictive control based on an autoregressive moving average structure. Herein, the physical model of DCTs is completely replaced by a data-driven model. Combined with the recursive least square method with the forgetting factor, the control system will no longer rely on the electrical parameters, guaranteeing strong robustness. Meanwhile, an adaptive balance controller is also proposed, which adjusts the gain of shift angles with reduced computational burden. These achieve accurate power/voltage allocation among all submodules while maintaining a fast dynamic response. The experimental comparisons with other schemes verify the effectiveness and superiority of the proposed method.
- 13 August 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Power Electronics
- Vol. 39 (11) , 15242-15256
Decoupled Distributed Control of Offshore Wind Farms Connected to DR-HVDC Based on Novel Adaptive Virtual Impedance
In offshore wind farms connected via diode-rectifier-based high-voltage dc, conventional distributed control strategies have significant coupling among active and reactive power, leading to large oscillations in wind turbine (WT) converter power, voltage, and grid frequency during transients. In this work, we propose a decoupled distributed control strategy based on a novel adaptive virtual impedance (VI) method. In detail, we newly propose a simple estimator to enable each WT controller to locally estimate the global average reactive power, without the need for communication and line impedance knowledge. By comparing the estimated global average value with the actual reactive power, we achieve dynamically adjustable VI, thereby completely decoupling the power control. In addition, a proportional feedforward control is integrated into the estimator, ensuring precise reactive power-sharing among WT converters. We also develop a small-signal model of the proposed method to theoretically confirm the decoupling characteristics, and to facilitate system stability analysis and key control parameters design. Experimental results validate the superior performance of power and frequency regulation during both steady and transient states, in comparison with the existing decoupling control method.
- 13 August 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Power Electronics
- Vol. 39 (11) , 15242-15256
Decoupled Distributed Control of Offshore Wind Farms Connected to DR-HVDC Based on Novel Adaptive Virtual Impedance
In offshore wind farms connected via diode-rectifier-based high-voltage dc, conventional distributed control strategies have significant coupling among active and reactive power, leading to large oscillations in wind turbine (WT) converter power, voltage, and grid frequency during transients. In this work, we propose a decoupled distributed control strategy based on a novel adaptive virtual impedance (VI) method. In detail, we newly propose a simple estimator to enable each WT controller to locally estimate the global average reactive power, without the need for communication and line impedance knowledge. By comparing the estimated global average value with the actual reactive power, we achieve dynamically adjustable VI, thereby completely decoupling the power control. In addition, a proportional feedforward control is integrated into the estimator, ensuring precise reactive power-sharing among WT converters. We also develop a small-signal model of the proposed method to theoretically confirm the decoupling characteristics, and to facilitate system stability analysis and key control parameters design. Experimental results validate the superior performance of power and frequency regulation during both steady and transient states, in comparison with the existing decoupling control method.
- 9 July 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Power Electronics
- Vol. 39 (10) , 12397-12410
Isolated Modular Multilevel Matrix Converter (I-M3C) Based Novel Solid-State Transformer (SST) With Low-Frequency Medium-Voltage AC Port
This article proposes a novel solid-state transformer (SST) having a low-frequency medium-voltage ac (LF-MVac) port distinctively, which can be the key equipment for smart distribution networks based on LF-MVac interconnection. The proposed SST has four ports of power-frequency medium-voltage ac (MVac), LF-MVac, low-voltage dc (LVdc), and low-voltage ac (LVac). In addition to the two-level low-voltage dc/ac converter, the proposed SST is mainly composed of an isolated modular multilevel matrix converter (I-M3C), which can achieve single-stage three-port power conversion. First, the topology of the I-M3C is introduced. Then, a simple modulation scheme is provided to achieve single-stage three-port power conversion, and the operating principles of the I-M3C are given in detail. In addition, a control strategy based on dual- dq coordinate system is designed, which can achieve stable operation without the complex multistage coordinated control and voltage-balancing control strategies. Finally, the effectiveness of the proposed control strategy is verified through a 10-kV/2-MW full-power simulation platform, and a 100-V/1-kW scaled-down experimental prototype is built to further demonstrate the correctness of the proposed I-M3C.
- 9 July 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Power Electronics
- Vol. 39 (10) , 12397-12410
Isolated Modular Multilevel Matrix Converter (I-M3C) Based Novel Solid-State Transformer (SST) With Low-Frequency Medium-Voltage AC Port
This article proposes a novel solid-state transformer (SST) having a low-frequency medium-voltage ac (LF-MVac) port distinctively, which can be the key equipment for smart distribution networks based on LF-MVac interconnection. The proposed SST has four ports of power-frequency medium-voltage ac (MVac), LF-MVac, low-voltage dc (LVdc), and low-voltage ac (LVac). In addition to the two-level low-voltage dc/ac converter, the proposed SST is mainly composed of an isolated modular multilevel matrix converter (I-M3C), which can achieve single-stage three-port power conversion. First, the topology of the I-M3C is introduced. Then, a simple modulation scheme is provided to achieve single-stage three-port power conversion, and the operating principles of the I-M3C are given in detail. In addition, a control strategy based on dual- dq coordinate system is designed, which can achieve stable operation without the complex multistage coordinated control and voltage-balancing control strategies. Finally, the effectiveness of the proposed control strategy is verified through a 10-kV/2-MW full-power simulation platform, and a 100-V/1-kW scaled-down experimental prototype is built to further demonstrate the correctness of the proposed I-M3C.
- 12 February 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Industrial Electronics
- Vol. 71 (10) , 12338-12347
Adaptive Fast-Optimization Predictive Control of MMC With Improved Hybrid Control Framework
Modular multilevel converters (MMC) are widely used in voltage-sourced converter-based high-voltage dc due to their modular design, ease of scale, and fault tolerance capabilities. The multivariable control objectives of MMCs can be achieved by model predictive control (MPC) due to MPC's fast dynamic response and ease of implementation. Nonetheless, conventional MPC techniques for MMC have shortcomings, including high computational requirements and poor circulating current suppression. First, this study proposes an adaptive fast-optimization MPC that adapts the number of candidate combinations to the steady and transient states, significantly reducing the computational burden. Second, an improved hybrid combination of MPC with proportional resonance controller is used to enhance the circulating current suppression performance. Simulations and experimental case studies on a three-phase grid-connected MMC validate the proposed techniques.
- 12 February 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Industrial Electronics
- Vol. 71 (10) , 12338-12347
Adaptive Fast-Optimization Predictive Control of MMC With Improved Hybrid Control Framework
Modular multilevel converters (MMC) are widely used in voltage-sourced converter-based high-voltage dc due to their modular design, ease of scale, and fault tolerance capabilities. The multivariable control objectives of MMCs can be achieved by model predictive control (MPC) due to MPC's fast dynamic response and ease of implementation. Nonetheless, conventional MPC techniques for MMC have shortcomings, including high computational requirements and poor circulating current suppression. First, this study proposes an adaptive fast-optimization MPC that adapts the number of candidate combinations to the steady and transient states, significantly reducing the computational burden. Second, an improved hybrid combination of MPC with proportional resonance controller is used to enhance the circulating current suppression performance. Simulations and experimental case studies on a three-phase grid-connected MMC validate the proposed techniques.
- 13 July 2023
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Power Electronics
- Vol. 38 (10) , 12757-12773
Hybrid Isolated Modular Multilevel Converter Based Solid-State Transformer Topology With Simplified Power Conversion Process and Uneven Voltage Ratio
This article proposes a novel triple-port solid-state transformer (SST) topology based on a hybrid isolated modular multilevel converter (MMC), which overcomes the limitation of voltage ratio R (pu) in the conventional MMC-based SST. By integrating a high-frequency link into the MMC structure and applying various types of isolated submodule (ISM), the proposed SST can function as a step-down rectifier, where U MVDC < U MVAC(p-p) . In this case, the power electronics converters used to connect downstream medium-voltage direct current (MVdc) link and distributed energy resources or battery storage require fewer active devices and may minimize the cost of protection equipment. In addition, the proposed SST retains the significant advantages of single-stage SSTs, such as single-stage power conversion, saving capacitor, and a simple control system. First, the topology and modulation strategy of two types of ISMs are discussed. In addition, this article provides a detailed analysis of operation principles, power flow, grid-tied control, and system reliability. Moreover, the proposed converter is compared with other SST topologies in terms of key performance indicators, such as peak efficiency, system volume, and number of active semiconductor devices. Finally, a 300-V/20-kW scaled-down prototype is developed, and the experimental results demonstrate the performance and verify the correctness of the proposed converter.
- 13 July 2023
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Power Electronics
- Vol. 38 (10) , 12757-12773
Hybrid Isolated Modular Multilevel Converter Based Solid-State Transformer Topology With Simplified Power Conversion Process and Uneven Voltage Ratio
This article proposes a novel triple-port solid-state transformer (SST) topology based on a hybrid isolated modular multilevel converter (MMC), which overcomes the limitation of voltage ratio R (pu) in the conventional MMC-based SST. By integrating a high-frequency link into the MMC structure and applying various types of isolated submodule (ISM), the proposed SST can function as a step-down rectifier, where U MVDC < U MVAC(p-p) . In this case, the power electronics converters used to connect downstream medium-voltage direct current (MVdc) link and distributed energy resources or battery storage require fewer active devices and may minimize the cost of protection equipment. In addition, the proposed SST retains the significant advantages of single-stage SSTs, such as single-stage power conversion, saving capacitor, and a simple control system. First, the topology and modulation strategy of two types of ISMs are discussed. In addition, this article provides a detailed analysis of operation principles, power flow, grid-tied control, and system reliability. Moreover, the proposed converter is compared with other SST topologies in terms of key performance indicators, such as peak efficiency, system volume, and number of active semiconductor devices. Finally, a 300-V/20-kW scaled-down prototype is developed, and the experimental results demonstrate the performance and verify the correctness of the proposed converter.