Srujana Sripathi
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Previous Organizations / Institutes
The organizations / institutes from the scholar's other articles in the past ten years
Research Subjects
Srujana Sripathi has a total of 27 co-authors. Here are the top co-authors by number of shared publications:
- Bharat Singh
Department of Mechanical Engineering, GLA University, Mathura, India
3 shared publications - Raviteja Surakasi
Lendi Institute of Engineering and Technology
3 shared publications - Shanthi Natarajan
PG and Research Department of Botany, Pachaiyappa's College (Affiliated to University of Madras), Chennai 600 030, Tamil Nadu, India
2 shared publications - Alimuddin1 shared publication
Arif Senol Sener
1 shared publication- Arif Senol Sener
Department of Mechanical Engineering
1 shared publication
Latest Publications
- RetractedOpen Access
- 17 February 2023
- Published by Hindawi Limited in Journal of Nanomaterials
- Vol. 2023 (1) , 1-6
Environmental Effect of Zinc Oxide Metal Nano Additives in Microalgae Biodiesel in Diesel Engine
We investigated how to extract energy from algal oil and convert it to biodiesel by transesterification in this study. In addition to performing engine performance tests with varying quantities of fuel mixture, parameters such as power, hourly torque consumption, specific consumption, and emissions of dioxide and monoxide were evaluated as an alternate solution to the pollution problem caused by fossil fuels. A 5.2 kW diesel engine powered the engine. The production of algal oil-based biodiesel was carried out effectively. The algal oil extraction procedure resulted in the production of biodiesel, which was then blended with commercial diesel in the amounts of 20, 40, and 60%. The engine performance testing revealed no statistically significant difference between the power and torque delivered by the various commercial diesel blends. Both hourly and particular consumption showed an increase of 15% and 20%, respectively, regarding commercial diesel consumption. However, the most significant advantage is the reduction in pollutant emissions, as demonstrated by the reduction in carbon dioxide emissions by more than 20% in any mixture of commercial diesel and biodiesel when compared to commercial diesel.
- 17 February 2023
- Published by Hindawi Limited in Journal of Nanomaterials
- Vol. 2023 (1) , 1-6
RetractedOpen AccessEnvironmental Effect of Zinc Oxide Metal Nano Additives in Microalgae Biodiesel in Diesel Engine
We investigated how to extract energy from algal oil and convert it to biodiesel by transesterification in this study. In addition to performing engine performance tests with varying quantities of fuel mixture, parameters such as power, hourly torque consumption, specific consumption, and emissions of dioxide and monoxide were evaluated as an alternate solution to the pollution problem caused by fossil fuels. A 5.2 kW diesel engine powered the engine. The production of algal oil-based biodiesel was carried out effectively. The algal oil extraction procedure resulted in the production of biodiesel, which was then blended with commercial diesel in the amounts of 20, 40, and 60%. The engine performance testing revealed no statistically significant difference between the power and torque delivered by the various commercial diesel blends. Both hourly and particular consumption showed an increase of 15% and 20%, respectively, regarding commercial diesel consumption. However, the most significant advantage is the reduction in pollutant emissions, as demonstrated by the reduction in carbon dioxide emissions by more than 20% in any mixture of commercial diesel and biodiesel when compared to commercial diesel.
- 12 February 2022
- Published by Springer Nature in Nanotechnology for Environmental Engineering
- Vol. 7 (1) , 289-296
Chemical synthesis of chitosan (CS)–sodium alginate (ALG) nanoparticles
- 12 February 2022
- Published by Springer Nature in Nanotechnology for Environmental Engineering
- Vol. 7 (1) , 289-296
Chemical synthesis of chitosan (CS)–sodium alginate (ALG) nanoparticles
- 10 February 2022
- Published by Springer Nature in Nanotechnology for Environmental Engineering
- Vol. 7 (1) , 269-275
Chemical-based synthesis of ZnO nanoparticles and their applications in agriculture
- 10 February 2022
- Published by Springer Nature in Nanotechnology for Environmental Engineering
- Vol. 7 (1) , 269-275
Chemical-based synthesis of ZnO nanoparticles and their applications in agriculture
- RetractedOpen Access
- 1 January 2022
- Published by Wiley in Journal of Nanomaterials
- Vol. 2022 (1)
[Retracted] Chlorella protothecoides Algae Oil and Its Mixes with Lower and Higher Alcohols and Al2O3 Metal Nanoadditives for Reduction of Pollution in a CI Engine
Numerous Algae oils with low and medium viscosity were investigated as fuel for CI engines. However, high viscous algae oil has not been explored in detail as a replacement for diesel in CI engines due to operational problems and poor performance characteristics. Esterification of neat algae oil to obtain its biodiesel is a complex process. The biodiesel obtained also has viscosity nearly five times more than diesel viscosity. Hence, research efforts on CI engines using algae oil methyl ester are lacking, particularly in combustion characteristics. This work focuses on utilizing algae oil as a fuel in CI engines. Algae oil has more affinity for alcohols due to a higher percentage of ricinoleic acid which aids in forming a homogeneous mixture. Alcohols with better fuel properties improve the combustion capability of algae oils with low and medium viscosity. However, not much research has been carried out in alcohols with very high viscous algae oil. Hence, in this work, higher and lower‐order alcohols were blended with algae oil in their neat form and their biodiesel with Al2O3 nanoadditives for performance improvement.
- 1 January 2022
- Published by Wiley in Journal of Nanomaterials
- Vol. 2022 (1)
RetractedOpen Access[Retracted] Chlorella protothecoides Algae Oil and Its Mixes with Lower and Higher Alcohols and Al2O3 Metal Nanoadditives for Reduction of Pollution in a CI Engine
Numerous Algae oils with low and medium viscosity were investigated as fuel for CI engines. However, high viscous algae oil has not been explored in detail as a replacement for diesel in CI engines due to operational problems and poor performance characteristics. Esterification of neat algae oil to obtain its biodiesel is a complex process. The biodiesel obtained also has viscosity nearly five times more than diesel viscosity. Hence, research efforts on CI engines using algae oil methyl ester are lacking, particularly in combustion characteristics. This work focuses on utilizing algae oil as a fuel in CI engines. Algae oil has more affinity for alcohols due to a higher percentage of ricinoleic acid which aids in forming a homogeneous mixture. Alcohols with better fuel properties improve the combustion capability of algae oils with low and medium viscosity. However, not much research has been carried out in alcohols with very high viscous algae oil. Hence, in this work, higher and lower‐order alcohols were blended with algae oil in their neat form and their biodiesel with Al2O3 nanoadditives for performance improvement.
- RetractedOpen Access
- 1 January 2022
- Published by SAGE Publications in Adsorption Science & Technology
- Vol. 2022
A Comprehensive Study on the Synthesis and Characterization of TiO2 Nanoparticles Using Aloe vera Plant Extract and Their Photocatalytic Activity against MB Dye
This paper investigates the use of A. vera extract as a natural capping agent for TiO2 nanoparticles as well as a reducing agent for TiO2 nanoparticles. XRD, ultraviolet diffuse reflectance (UV-DRS), Fourier transform infrared spectroscopy (FT-IR), transmission electron microscopy (TEM), scanning electron microscopy (SEM), and energy-dispersive X-ray analysis (EDXA) were used to characterize the material. In their X-ray diffraction patterns, the titanium dioxide nanoparticles were found to have a high degree of crystallinity, indicating that they were synthesized. Infrared (FT-IR) spectra were used to determine the chemical composition of the plant extract. The DRS spectra in the UV-visible range reveal a high absorption peak at 356 nm, which indicates the existence of TiO2 nanoparticles in the sample. Shape of nanoparticles was revealed by SEM and TEM morphological investigations, which revealed their irregular and somewhat spherical nature. Only titanium and oxygen compounds were found in the EDX spectrum, indicating that they were present. This demonstrates that the NPs that were produced are devoid of contaminants. Using the produced nanoparticles as catalyst, we presented a photocatalytic degradation method for the dye methylene blue in this paper. The findings showed that 94 percent of the damage occurred within 120 minutes of being exposed to UV radiation.
- 1 January 2022
- Published by SAGE Publications in Adsorption Science & Technology
- Vol. 2022
RetractedOpen AccessA Comprehensive Study on the Synthesis and Characterization of TiO2 Nanoparticles Using Aloe vera Plant Extract and Their Photocatalytic Activity against MB Dye
This paper investigates the use of A. vera extract as a natural capping agent for TiO2 nanoparticles as well as a reducing agent for TiO2 nanoparticles. XRD, ultraviolet diffuse reflectance (UV-DRS), Fourier transform infrared spectroscopy (FT-IR), transmission electron microscopy (TEM), scanning electron microscopy (SEM), and energy-dispersive X-ray analysis (EDXA) were used to characterize the material. In their X-ray diffraction patterns, the titanium dioxide nanoparticles were found to have a high degree of crystallinity, indicating that they were synthesized. Infrared (FT-IR) spectra were used to determine the chemical composition of the plant extract. The DRS spectra in the UV-visible range reveal a high absorption peak at 356 nm, which indicates the existence of TiO2 nanoparticles in the sample. Shape of nanoparticles was revealed by SEM and TEM morphological investigations, which revealed their irregular and somewhat spherical nature. Only titanium and oxygen compounds were found in the EDX spectrum, indicating that they were present. This demonstrates that the NPs that were produced are devoid of contaminants. Using the produced nanoparticles as catalyst, we presented a photocatalytic degradation method for the dye methylene blue in this paper. The findings showed that 94 percent of the damage occurred within 120 minutes of being exposed to UV radiation.
- Open Access
- 1 January 2022
- Published by SAGE Publications in Adsorption Science & Technology
- Vol. 2022
Synthesis and Characterization of TiO2-Water Nanofluids
Nanofluids made of TiO2 and multiwalled carbon nanotubes are the focus of our study. Using TiO2 and water as the basic fluids, nanofluids were created in 100 : 0, 75 : 25, and 50 : 50 proportions. Carbon nanotubes (CNTs) were disseminated into these base fluids of three types at 0.125, 0.25, and 0.5 percentages. Over the course of two months, the change of zeta potential is monitored to assess the stability of the dispersion. XRD analysis and SEM and TEM analysis are carried out for TiO2 nanofluids. Nanoparticles were analyzed using EDAX analysis to identify their composition. SEM examination was used to investigate the morphology for TiO2 nanoparticles. Particles of TiO2 produced in this manner seemed to have an average diameter of 27 nm. Nanofluids have a poor stability, which is the most important aspect of employing them, although most studies did not focus on this. When it comes to nanofluids, this study is unique in that it provides an in-depth look of surface modification approaches that have been employed by researchers to address these issues, as well as an evaluation of their stability over two months. Solubility is improved by acid treatment of CNTs, which results in functional groups on the surface of CNTs.
- 1 January 2022
- Published by SAGE Publications in Adsorption Science & Technology
- Vol. 2022
Open AccessSynthesis and Characterization of TiO2-Water Nanofluids
Nanofluids made of TiO2 and multiwalled carbon nanotubes are the focus of our study. Using TiO2 and water as the basic fluids, nanofluids were created in 100 : 0, 75 : 25, and 50 : 50 proportions. Carbon nanotubes (CNTs) were disseminated into these base fluids of three types at 0.125, 0.25, and 0.5 percentages. Over the course of two months, the change of zeta potential is monitored to assess the stability of the dispersion. XRD analysis and SEM and TEM analysis are carried out for TiO2 nanofluids. Nanoparticles were analyzed using EDAX analysis to identify their composition. SEM examination was used to investigate the morphology for TiO2 nanoparticles. Particles of TiO2 produced in this manner seemed to have an average diameter of 27 nm. Nanofluids have a poor stability, which is the most important aspect of employing them, although most studies did not focus on this. When it comes to nanofluids, this study is unique in that it provides an in-depth look of surface modification approaches that have been employed by researchers to address these issues, as well as an evaluation of their stability over two months. Solubility is improved by acid treatment of CNTs, which results in functional groups on the surface of CNTs.
- RetractedOpen Access
- 29 December 2021
- Published by Wiley in Journal of Nanomaterials
- Vol. 2021, 1-13
Evaluation of Physicothermal Properties of Solar Thermic Fluids Dispersed with Multiwalled Carbon Nanotubes and Prediction of Data Using Artificial Neural Networks
A review of multiwalled carbon nanotubes as solar thermic fluids and their thermophysical properties is done in this article. The basic fluids were ethylene glycol and water in ratios of 100 : 0, 90 : 10, and 80 : 20. To investigate how surface modification impacts thermophysical properties, three base fluids were combined with surfactant-assisted MWCNTs and oxidized MWCNTs in weight fractions of 0.125, 0.25, and 0.5 percent, respectively. It takes two months to check whether the dispersion stays constant. Thermal conductivity and viscosity measurement were done using heated discs and Anton Paar viscometers. Using oxidized MWCNTs to disperse, the base fluids increased thermal conductivity by 15% to 24%. Surfactant-assisted MWCNTs in nanofluids perform worse than oxidized MWCNTs. The dynamic viscosity of nanofluids is higher than that of basic fluids between 50 and 70°C. During a mathematical computation, all of the MWCNT weight fractions and ethylene glycol volume percentages are included. The correlation may be a good fit for the experimental data within limits. The characteristics are forecasted using feed-forward backpropagation. In this research, buried layer neurons and factors are examined.
- 29 December 2021
- Published by Wiley in Journal of Nanomaterials
- Vol. 2021, 1-13
RetractedOpen AccessEvaluation of Physicothermal Properties of Solar Thermic Fluids Dispersed with Multiwalled Carbon Nanotubes and Prediction of Data Using Artificial Neural Networks
A review of multiwalled carbon nanotubes as solar thermic fluids and their thermophysical properties is done in this article. The basic fluids were ethylene glycol and water in ratios of 100 : 0, 90 : 10, and 80 : 20. To investigate how surface modification impacts thermophysical properties, three base fluids were combined with surfactant-assisted MWCNTs and oxidized MWCNTs in weight fractions of 0.125, 0.25, and 0.5 percent, respectively. It takes two months to check whether the dispersion stays constant. Thermal conductivity and viscosity measurement were done using heated discs and Anton Paar viscometers. Using oxidized MWCNTs to disperse, the base fluids increased thermal conductivity by 15% to 24%. Surfactant-assisted MWCNTs in nanofluids perform worse than oxidized MWCNTs. The dynamic viscosity of nanofluids is higher than that of basic fluids between 50 and 70°C. During a mathematical computation, all of the MWCNT weight fractions and ethylene glycol volume percentages are included. The correlation may be a good fit for the experimental data within limits. The characteristics are forecasted using feed-forward backpropagation. In this research, buried layer neurons and factors are examined.