Hao Kong

To achieve peak carbon emission and carbon neutrality, marine renewable energy plays an essential role in energy transition in China’s coastal areas. Fujian Province is not only exposed to a shortage of traditional energy resources, but also urgently needs to change its current coal-based energy structure to reduce carbon emissions. In contrast to the scarcity of fossil fuels, Fujian Province has rich marine energy reserves, with an abundant supply of offshore wind, wave, tidal, and ocean current energy. Therefore, the active development of low-carbon and carbon-free marine energy can increase the energy supply and alleviate energy shortages. Furthermore, it can optimize the structure of the energy sector in this region. This study analyzed the energy structure of the Fujian Province, the effort needed to reach the carbon neutrality goal, the reserves of marine energy resources, the background of marine energy development technology, and socio-economic conditions. We believe that the development of the marine energy is a critical action towards solving the current energy resource limitations in Fujian and subsequently propose relevant suggestions for marine energy industry development in Fujian Province in terms of development ideas and pathways.

Hydrogen peroxide (H₂O₂) is one of the intermediates or final products of biological metabolism and participates in many important biological processes of life activities. The detection of H₂O₂ is of great significance in clinical disease monitoring, environmental protection, and bioanalysis. In this study, Ti₃C₂-based nanohybrids are prepared by the biological modification and self-assembled peptide nanosheets (PNSs)-based biomimetic synthesis of copper sulfide nanoparticles (CuS NPs), which show potential application in the fabrication of low-cost and high-performance electrochemical H₂O₂ biosensors. The synthesized CuS-PNSs/Ti₃C₂ nanohybrids exhibit excellent electrochemical performance towards H₂O₂, in which CuS NPs can catalyze the decomposition of H₂O₂ and realize the transformation from a chemical signal to an electrical signal to achieve the purpose of H₂O₂ detection. The prepared CuS-PNSs/Ti₃C₂-based electrochemical biosensor platform exhibits a wide detection range (5 μM–15 mM) and a low detection limit (0.226 μM). In addition, it reveals good selectivity and stability and can realize the monitoring of H₂O₂ in a complex environment. The successful biomimetic synthesis of CuS-PNSs/Ti₃C₂ hybrid nanomaterials provides a green and friendly strategy for the design and synthesis of functional nanomaterials and also provides a new inspiration for the construction of highly effective electrochemical biosensors for practical detection of H₂O₂ in various environments.

Carbon nanofibers (CaNFs) exhibit promising applications in the fields of environmental science and nanotechnology, and self-assembled peptide nanofibers (PNFs) are useful for the biomimetic synthesis of organic-inorganic hybrid nanomaterials and the fabrication of functional hybrid membranes for the removal of various pollutants from water. In this work, we report the biomimetic synthesis of hybrid nanomaterials by the interweaving of CaNFs and PNFs. Using the biomimetic mineralization properties of PNFs, ZrO₂ nanoparticles were synthesized along the nanofiber surface, and then functional nanohybrid porous membranes were prepared by the vacuum filtration technology. For the fabrication of membranes, the amount of PNFs and ZrO₂ precursors in the hybrid membrane were optimized. The designed organic-inorganic hybrid membranes exhibited high removal performance for fluorine ion (F⁻) from water, and the removal efficiency of the fabricated membranes towards F⁻ ion-containing aqueous solution with a concentration of 50–100 mg/L reached more than 80%. In addition, the nanofiltration membranes revealed good adsorption capacity for F⁻ ions. It is expected that the strategies shown in this study will be beneficial for the design, biomimetic synthesis, and fabrication of nanoporous membranes for economic, rapid, and efficient water purification.

Graphene-based nanomaterials have shown wide applications in antimicrobial fields due to their accelerated rate of pathogen resistance and good antimicrobial properties. To apply graphene materials in the antimicrobial test, the graphene materials are usually fabricated as two-dimensional (2D) membranes. In addition, to improve the antimicrobial efficiency, graphene membranes are modified with various functional nanomaterials, such as nanoparticles, biomolecules, polymers, etc. In this review, we present recent advances in the fabrication, functional tailoring, and antimicrobial applications of graphene-based membranes. To implement this goal, we first introduce the synthesis of graphene materials and then the fabrication of 2D graphene-based membranes with potential techniques such as chemical vapor deposition, vacuum filtration, spin-coating, casting, and layer-by-layer self-assembly. Then, we present the functional tailoring of graphene membranes by adding metal and metal oxide nanoparticles, polymers, biopolymers, metal–organic frameworks, etc., with graphene. Finally, we focus on the antimicrobial mechanisms of graphene membranes, and demonstrate typical studies on the use of graphene membranes for antibacterial, antiviral, and antifungal applications. It is expected that this work will help readers to understand the antimicrobial mechanism of various graphene-based membranes and, further, to inspire the design and fabrication of functional graphene membranes/films for biomedical applications.

Two-dimensional materials (2DMs) exhibited great potential for applications in materials science, energy storage, environmental science, biomedicine, sensors/biosensors, and others due to their unique physical, chemical, and biological properties. In this review, we present recent advances in the fabrication of 2DM-based electrochemical sensors and biosensors for applications in food safety and biomolecular detection that are related to human health. For this aim, firstly, we introduced the bottom-up and top-down synthesis methods of various 2DMs, such as graphene, transition metal oxides, transition metal dichalcogenides, MXenes, and several other graphene-like materials, and then we demonstrated the structure and surface chemistry of these 2DMs, which play a crucial role in the functionalization of 2DMs and subsequent composition with other nanoscale building blocks such as nanoparticles, biomolecules, and polymers. Then, the 2DM-based electrochemical sensors/biosensors for the detection of nitrite, heavy metal ions, antibiotics, and pesticides in foods and drinks are introduced. Meanwhile, the 2DM-based sensors for the determination and monitoring of key small molecules that are related to diseases and human health are presented and commented on. We believe that this review will be helpful for promoting 2DMs to construct novel electronic sensors and nanodevices for food safety and health monitoring.

Metal oxide nanoparticles have been widely utilized for the fabrication of functional gas sensors to determine various flammable, explosive, toxic, and harmful gases due to their advantages of low cost, fast response, and high sensitivity. However, metal oxide-based gas sensors reveal the shortcomings of high operating temperature, high power requirement, and low selectivity, which limited their rapid development in the fabrication of high-performance gas sensors. The combination of metal oxides with two-dimensional (2D) nanomaterials to construct a heterostructure can hybridize the advantages of each other and overcome their respective shortcomings, thereby improving the sensing performance of the fabricated gas sensors. In this review, we present recent advances in the fabrication of metal oxide-, 2D nanomaterials-, as well as 2D material/metal oxide composite-based gas sensors with highly sensitive and selective functions. To achieve this aim, we firstly introduce the working principles of various gas sensors, and then discuss the factors that could affect the sensitivity of gas sensors. After that, a lot of cases on the fabrication of gas sensors by using metal oxides, 2D materials, and 2D material/metal oxide composites are demonstrated. Finally, we summarize the current development and discuss potential research directions in this promising topic. We believe in this work is helpful for the readers in multidiscipline research fields like materials science, nanotechnology, chemical engineering, environmental science, and other related aspects.

Studying the interactions between biomolecules and material interfaces play a crucial role in the designing and synthesizing of functional bionanomaterials with tailored structure and function. Previously, a lot of studies were performed on the self-assembly of peptides in solution through internal and external stimulations, which mediated the creation of peptide nanostructures from zero-dimension to three-dimension. In this study, we demonstrate the self-assembly behavior of the GNNQQNY peptide on the surface of mica and highly oriented pyrolytic graphite through tailoring the self-assembly conditions. Various factors, such as the type of dissolvent, peptide concentration, pH value, and evaporation period on the formation of peptide nanofibers and nanoribbons with single- and bi-directional arrays are investigated. It is found that the creation of peptide nanoribbons on both mica and HOPG can be achieved effectively through adjusting and optimizing the experimental parameters. Based on the obtained results, the self-assembly and formation mechanisms of peptide nanoribbons on both material interfaces are discussed. It is expected that the findings obtained in this study will inspire the design of motif-specific peptides with high binding affinity towards materials and mediate the green synthesis of peptide-based bionanomaterials with unique function and application potential.

In recent years, the degree of marketization allocation of marine resources has been increasing in China. The central government has issued a series of laws and regulations to comprehensively promote the bidding, auction and listing of sea area use rights, and local governments have also issued supporting policies for market transfer based on the price assessment of the sea area use right. Among the numerous evaluation methods, the hypothetical development method is to evaluate the developed and undeveloped sea areas as they are completed, which is very suitable for the current situation of sea areas before listing, and has become the most commonly used evaluation method in the field of sea area use right evaluation. In this study, the entertainment sea area in B city is taken as an example, and the sea area price is calculated in detail by using the hypothetical development method. By analyzing the calculation process and results, this paper discusses the application and limitations of the hypothetical development method in the field of sea area price evaluation. It is of positive significance to further improve the price evaluation of the sea areas use right.