Dilgam Babir Tagiyev
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Dilgam Babir Tagiyev has a total of 78 co-authors. Here are the top co-authors by number of shared publications:
- Akif Shikhan Aliyev
“Institute of Chemistry” PLE Ministry of Science and Education of the Republic of Azerbaijan, AZ 1173 Baku, Azerbaijan
6 shared publications - Vusala Asim Majidzade
“Institute of Chemistry” PLE Ministry of Science and Education of the Republic of Azerbaijan, AZ 1173 Baku, Azerbaijan
4 shared publications - Sima Mamed Zulfugarova
Institute of Catalysis and Inorganic Chemistry Named After Acad.M.Nagiyev
3 shared publications - Asmat Nizami Azizova
Azerbaijan Medical University, Scientific Research Centre (SRC), A. Kasumzade, St. 14. AZ 1022, Baku, Azerbaijan
2 shared publications - Azimova Gunel Ramiz
Chemistry Institute, Baku, Azerbaijan
2 shared publications - Mahammad Baba Babanly
Institute of Chemistry, Ministry of Science and Education of the Republic of Azerbaijan, Baku, Azerbaijan
2 shared publications
Latest Publications
- 14 November 2026
- Published by Wiley in Journal of Applied Polymer Science
- p. e71807
Synthesis and Characterization of Nickel Nanocomposites Based on Polyacrylic Acid‐Modified Chitosan
The development of functional polymer‐based materials is of considerable interest in catalysis and advanced materials engineering. In this study, nickel‐containing composites were synthesized using poly(acrylic acid) (PAA)‐modified chitosan as a biopolymer support matrix. The incorporation of PAA introduced additional carboxyl functional groups that may provide interaction sites for nickel‐containing species within the polymer matrix. The synthesized composites were characterized using Fourier‐transform infrared spectroscopy (FTIR), ultraviolet–visible spectroscopy (UV–Vis), scanning electron microscopy (SEM), energy‐dispersive X‐ray spectroscopy (EDX), and X‐ray diffraction (XRD). FTIR analysis revealed spectral changes consistent with interactions between the polymer functional groups and nickel‐containing species. SEM observations revealed differences in surface morphology between the CS/PAA support and the nickel‐containing composite, while EDX confirmed the presence of nickel in the washed composite, with a measured content of 5.92 wt% (1.9 at%). XRD analysis revealed crystalline diffraction features suggesting the possible presence of nickel hydroxide, nickel oxide, and metallic nickel phases. However, the available characterization results do not establish the exclusive formation of metallic nickel nanoparticles or determine the surface oxidation state of nickel. These findings demonstrate the incorporation of nickel‐containing species into the chitosan/PAA matrix and provide a basis for further investigation of the material for potential catalytic applications.
- 14 November 2026
- Published by Wiley in Journal of Applied Polymer Science
- p. e71807
Synthesis and Characterization of Nickel Nanocomposites Based on Polyacrylic Acid‐Modified Chitosan
The development of functional polymer‐based materials is of considerable interest in catalysis and advanced materials engineering. In this study, nickel‐containing composites were synthesized using poly(acrylic acid) (PAA)‐modified chitosan as a biopolymer support matrix. The incorporation of PAA introduced additional carboxyl functional groups that may provide interaction sites for nickel‐containing species within the polymer matrix. The synthesized composites were characterized using Fourier‐transform infrared spectroscopy (FTIR), ultraviolet–visible spectroscopy (UV–Vis), scanning electron microscopy (SEM), energy‐dispersive X‐ray spectroscopy (EDX), and X‐ray diffraction (XRD). FTIR analysis revealed spectral changes consistent with interactions between the polymer functional groups and nickel‐containing species. SEM observations revealed differences in surface morphology between the CS/PAA support and the nickel‐containing composite, while EDX confirmed the presence of nickel in the washed composite, with a measured content of 5.92 wt% (1.9 at%). XRD analysis revealed crystalline diffraction features suggesting the possible presence of nickel hydroxide, nickel oxide, and metallic nickel phases. However, the available characterization results do not establish the exclusive formation of metallic nickel nanoparticles or determine the surface oxidation state of nickel. These findings demonstrate the incorporation of nickel‐containing species into the chitosan/PAA matrix and provide a basis for further investigation of the material for potential catalytic applications.
- 21 May 2026
- Published by Springer Nature
- p. 427-435
Isomerization of Gas Gasoline into Environmentally Friendly Gasoline Components
- 21 May 2026
- Published by Springer Nature
- p. 427-435
Isomerization of Gas Gasoline into Environmentally Friendly Gasoline Components
- 13 May 2026
- Published by Wiley in Journal of Applied Polymer Science
- Vol. 143 (29)
AI ‐Guided Design of Polymer‐Supported Metal Catalysts: From Predictive Machine Learning to Bayesian Optimization
Polymer immobilized metal catalysts present a platform for sustainable chemistry, but their design is often hindered by a vast, mixed‐variable design space consisting of polymer architecture, functional chemistry, and metal loading. Conventional iterative testing is inefficient for these systems. This perspective evaluates the role of artificial intelligence in accelerating the design and optimization of polymer‐supported metal catalysts, with emphasis on the transition from predictive machine learning to Bayesian optimization. Predictive modeling approaches relevant to polymer‐based materials are outlined, followed by a potential workflow and discussion of common pitfalls. Physics‐informed neural networks and related hybrid approaches are also considered as complementary alternatives when mechanistic knowledge, transport models, or thermodynamic constraints are available. We further highlight pioneering case studies that demonstrate the practical relevance of Bayesian optimization for polymer‐supported catalytic systems. We argue that the most promising near‐term route is an integrated hybrid workflow that combines curated experimental and computational datasets with interpretable, physics‐aware surrogate models and uncertainty‐guided Bayesian optimization to efficiently determine the next formulations or operating conditions for discovery.
- 13 May 2026
- Published by Wiley in Journal of Applied Polymer Science
- Vol. 143 (29)
AI ‐Guided Design of Polymer‐Supported Metal Catalysts: From Predictive Machine Learning to Bayesian Optimization
Polymer immobilized metal catalysts present a platform for sustainable chemistry, but their design is often hindered by a vast, mixed‐variable design space consisting of polymer architecture, functional chemistry, and metal loading. Conventional iterative testing is inefficient for these systems. This perspective evaluates the role of artificial intelligence in accelerating the design and optimization of polymer‐supported metal catalysts, with emphasis on the transition from predictive machine learning to Bayesian optimization. Predictive modeling approaches relevant to polymer‐based materials are outlined, followed by a potential workflow and discussion of common pitfalls. Physics‐informed neural networks and related hybrid approaches are also considered as complementary alternatives when mechanistic knowledge, transport models, or thermodynamic constraints are available. We further highlight pioneering case studies that demonstrate the practical relevance of Bayesian optimization for polymer‐supported catalytic systems. We argue that the most promising near‐term route is an integrated hybrid workflow that combines curated experimental and computational datasets with interpretable, physics‐aware surrogate models and uncertainty‐guided Bayesian optimization to efficiently determine the next formulations or operating conditions for discovery.
- Open Access
- 10 December 2025
- Published by International Association of Physical Chemists (IAPC) in Journal of Electrochemical Science and Engineering
- p. 2848
Study of the electroreduction process of indium ions from aqueous electrolyte
The work focuses on the mechanism of the electroreduction of indium ions in an aqueous electrolyte containing hydrochloric acid. The potential region for the electroreduction of indium ions on platinum (-0.3 to -1.5 V), nickel (-0.8 to -1.5 V), and Pt/In (-0.63 to -1.5 V) electrodes was determined by recording potentiodynamic polarization curves. The influence of several factors, including temperature, indium ion concentration, scan rate, and disk electrode rotation speed, on the electroreduction of indium was investigated. It was established that increasing both the temperature and the indium ion concentration in the electrolyte accelerates the reduction process. The process is primarily controlled by the diffusion of indium ions to the cathode surface. Furthermore, polarization curves were obtained using a rotating platinum disk electrode. The dependence of the current density on the electrode rotation speed at different potentials showed that the electroreduction process of indium ions in an aqueous electrolyte is accompanied by diffusion polarization.
- 10 December 2025
- Published by International Association of Physical Chemists (IAPC) in Journal of Electrochemical Science and Engineering
- p. 2848
Open AccessStudy of the electroreduction process of indium ions from aqueous electrolyte
The work focuses on the mechanism of the electroreduction of indium ions in an aqueous electrolyte containing hydrochloric acid. The potential region for the electroreduction of indium ions on platinum (-0.3 to -1.5 V), nickel (-0.8 to -1.5 V), and Pt/In (-0.63 to -1.5 V) electrodes was determined by recording potentiodynamic polarization curves. The influence of several factors, including temperature, indium ion concentration, scan rate, and disk electrode rotation speed, on the electroreduction of indium was investigated. It was established that increasing both the temperature and the indium ion concentration in the electrolyte accelerates the reduction process. The process is primarily controlled by the diffusion of indium ions to the cathode surface. Furthermore, polarization curves were obtained using a rotating platinum disk electrode. The dependence of the current density on the electrode rotation speed at different potentials showed that the electroreduction process of indium ions in an aqueous electrolyte is accompanied by diffusion polarization.
- Open Access
- 19 October 2025
- Published by Oles Honchar Dnipropetrovsk National University in Journal of Chemistry and Technologies
- Vol. 33 (3) , 705-713
ПІДВИЩЕННЯ ЕФЕКТИВНОСТІ ПЕРЕРОБКИ ЛЕГКОЇ ПІРОЛІЗНОЇ СМОЛИ: ПІДХІД НА ОСНОВІ МАТЕМАТИЧНОЇ МОДЕЛІ
The research work is devoted to enhancing the processing efficiency of light pyrolysis rezin for ethylene production and developing a mathematical model of this process. The process is aimed at increasing the yield of benzene by dealkylation of benzene-alkyl derivatives in the system using a toluene-based aluminum complex catalyst. Calculations were performed using the OptimMe and OriginLab software packages. By studying the effect of various factors (the amount of benzene at the beginning, temperature, the amount of catalyst, the duration of the process, etc.), the optimal temperature regime of the process, the composition and amount of the catalyst, and the duration of the process corresponding to the maximum yield of benzene were selected. Using these results, a multifactorial mathematical model of the process was developed, the adequacy of the model was determined by the Fisher's criterion, and the regression coefficients were evaluated by the Student's criterion. The obtained regression enables us to estimate the yield of benzene based on any concentration of the catalyst and the temperature conditions of the process (ranging from 0 to 80 °C). and thus can be used to minimize the total costs of implementing the process. Calculations indicate that the maximum yield of benzene occurs at a temperature of 80 °C, with a catalyst concentration of 2.5 %, and a process duration of 240 minutes.
- 19 October 2025
- Published by Oles Honchar Dnipropetrovsk National University in Journal of Chemistry and Technologies
- Vol. 33 (3) , 705-713
Open AccessПІДВИЩЕННЯ ЕФЕКТИВНОСТІ ПЕРЕРОБКИ ЛЕГКОЇ ПІРОЛІЗНОЇ СМОЛИ: ПІДХІД НА ОСНОВІ МАТЕМАТИЧНОЇ МОДЕЛІ
The research work is devoted to enhancing the processing efficiency of light pyrolysis rezin for ethylene production and developing a mathematical model of this process. The process is aimed at increasing the yield of benzene by dealkylation of benzene-alkyl derivatives in the system using a toluene-based aluminum complex catalyst. Calculations were performed using the OptimMe and OriginLab software packages. By studying the effect of various factors (the amount of benzene at the beginning, temperature, the amount of catalyst, the duration of the process, etc.), the optimal temperature regime of the process, the composition and amount of the catalyst, and the duration of the process corresponding to the maximum yield of benzene were selected. Using these results, a multifactorial mathematical model of the process was developed, the adequacy of the model was determined by the Fisher's criterion, and the regression coefficients were evaluated by the Student's criterion. The obtained regression enables us to estimate the yield of benzene based on any concentration of the catalyst and the temperature conditions of the process (ranging from 0 to 80 °C). and thus can be used to minimize the total costs of implementing the process. Calculations indicate that the maximum yield of benzene occurs at a temperature of 80 °C, with a catalyst concentration of 2.5 %, and a process duration of 240 minutes.
- Open Access
- 1 April 2025
- Published by International Association of Physical Chemists (IAPC) in Journal of Electrochemical Science and Engineering
- Vol. 15 (3) , 2666
Electrodeposition of Ni-Co thin films from ammonia-chloride electrolyte
This study presents the research results on the co-deposition of nickel and cobalt from an alkaline electrolyte containing glycine. For this purpose, cyclic and linear polarization curves of co-deposition were obtained at various cobalt concentrations, different poten-tial sweep rates, and electrolyte temperatures. It was established that the co-deposition process occurs anomalously, with the cobalt content in the deposited films exceeding that of nickel. The deposits obtained under optimal conditions contained 37.25 % Ni and 51.43 % Co. The study of the effect of the potential sweep rate on the co-deposition process of nickel and cobalt revealed a linear relationship between the current peak value and the square root of the potential sweep rate. This indicates that the initial stage of Ni-Co co-deposition is controlled by the diffusion of the metal ions to the cathode surface. When recording polarization curves on a rotating disk electrode at different rotation speeds, the relationship between the current peak value and the square root of the electrode rotation speed was also linear at relatively low rotation speeds. However, at higher rotation speeds, the process was controlled by electrochemical polarization. The co-deposition of Ni with Co was confirmed through X-ray diffraction, scanning electron microscopy and energy-dispersive X-ray spectroscopy analyses. The investigation of the catalytic activity of Ni-Co deposits in a neutral medium (0.5 M Na₂SO₄) demonstrated that the amorphous thin films, not subjected to annealing, exhibited the best electrocatalytic properties for the hydrogen evolution reaction. The Tafel slope was determined to be 118 mV dec-1.
- 1 April 2025
- Published by International Association of Physical Chemists (IAPC) in Journal of Electrochemical Science and Engineering
- Vol. 15 (3) , 2666
Open AccessElectrodeposition of Ni-Co thin films from ammonia-chloride electrolyte
This study presents the research results on the co-deposition of nickel and cobalt from an alkaline electrolyte containing glycine. For this purpose, cyclic and linear polarization curves of co-deposition were obtained at various cobalt concentrations, different poten-tial sweep rates, and electrolyte temperatures. It was established that the co-deposition process occurs anomalously, with the cobalt content in the deposited films exceeding that of nickel. The deposits obtained under optimal conditions contained 37.25 % Ni and 51.43 % Co. The study of the effect of the potential sweep rate on the co-deposition process of nickel and cobalt revealed a linear relationship between the current peak value and the square root of the potential sweep rate. This indicates that the initial stage of Ni-Co co-deposition is controlled by the diffusion of the metal ions to the cathode surface. When recording polarization curves on a rotating disk electrode at different rotation speeds, the relationship between the current peak value and the square root of the electrode rotation speed was also linear at relatively low rotation speeds. However, at higher rotation speeds, the process was controlled by electrochemical polarization. The co-deposition of Ni with Co was confirmed through X-ray diffraction, scanning electron microscopy and energy-dispersive X-ray spectroscopy analyses. The investigation of the catalytic activity of Ni-Co deposits in a neutral medium (0.5 M Na₂SO₄) demonstrated that the amorphous thin films, not subjected to annealing, exhibited the best electrocatalytic properties for the hydrogen evolution reaction. The Tafel slope was determined to be 118 mV dec-1.
- Open Access
- 31 January 2025
- Published by Asian Publication Corporation in Asian Journal of Chemistry
- Vol. 37 (2) , 309-312
Synthesis and Structural Characterization of Nickel Nanoparticles capped Polyvinylpyrrolidone
Due to its unique properties such as solubility in water and other organic solvents, adhesion, non-toxicity and biocompatibility, poly-N-vinylpyrrolidone (PVP) is widely used in various industrial processes and scientific applications, including pharmaceuticals and cosmetics. Nickel-based catalysts, on the other hand, are important in many catalytic processes due to their efficiency and economy. The current study involved the fabrication of nickel nanoparticles capped polyvinylpyrrolidone as nanocatalysts, revealing that metal nanoparticles are integrated into both the surface and core of the polymer.
- 31 January 2025
- Published by Asian Publication Corporation in Asian Journal of Chemistry
- Vol. 37 (2) , 309-312
Open AccessSynthesis and Structural Characterization of Nickel Nanoparticles capped Polyvinylpyrrolidone
Due to its unique properties such as solubility in water and other organic solvents, adhesion, non-toxicity and biocompatibility, poly-N-vinylpyrrolidone (PVP) is widely used in various industrial processes and scientific applications, including pharmaceuticals and cosmetics. Nickel-based catalysts, on the other hand, are important in many catalytic processes due to their efficiency and economy. The current study involved the fabrication of nickel nanoparticles capped polyvinylpyrrolidone as nanocatalysts, revealing that metal nanoparticles are integrated into both the surface and core of the polymer.
- Open Access
- 4 December 2024
- Published by Voronezh State University in Kondensirovannye sredy i mezhfaznye granitsy = Condensed Matter and Interphases
- Vol. 27 (1) , 48-56
Thermodynamic study of zinc antimonides by the electromotive force measurements
Zinc antimonides and phases based on them are of great interest as earth-abundant, low-cost, and environmentally friendly thermoelectric materials. The present work demonstrates the results of a thermodynamic study of the ZnSb and Zn4Sb3 compounds by a low-temperature electromotive force (emf) method with a glycerol electrolyte in the 300-430 K temperaturesrange. Measurements were performed using equilibrium samples from the ZnSb+Sb and ZnSb+Zn4Sb3 two-phase regions of the Zn-Sb binary system. The phase compositions of prepared samples were controlled by means of the powder X-ray diffraction (PXRD) method. Using the least square method, the linear equations of temperature dependences of the emf data wereobtained. Based on these equations and relevant thermodynamic expressions, the partial molar Gibbs free energy, enthalpy, and entropy of zinc in alloys were calculated. Utilizing the phase diagram of the Zn-Sb system, the virtual-cell reactions for both binary compounds were determined, based on which their standard hermodynamic functions of formation and standard entropies were calculated. A comparative analysis of the obtained results with available literature data was carried out. The results of the current work are highly accurate and can be considered a new contribution to the thermodynamics of zinc antimonides
- 4 December 2024
- Published by Voronezh State University in Kondensirovannye sredy i mezhfaznye granitsy = Condensed Matter and Interphases
- Vol. 27 (1) , 48-56
Open AccessThermodynamic study of zinc antimonides by the electromotive force measurements
Zinc antimonides and phases based on them are of great interest as earth-abundant, low-cost, and environmentally friendly thermoelectric materials. The present work demonstrates the results of a thermodynamic study of the ZnSb and Zn4Sb3 compounds by a low-temperature electromotive force (emf) method with a glycerol electrolyte in the 300-430 K temperaturesrange. Measurements were performed using equilibrium samples from the ZnSb+Sb and ZnSb+Zn4Sb3 two-phase regions of the Zn-Sb binary system. The phase compositions of prepared samples were controlled by means of the powder X-ray diffraction (PXRD) method. Using the least square method, the linear equations of temperature dependences of the emf data wereobtained. Based on these equations and relevant thermodynamic expressions, the partial molar Gibbs free energy, enthalpy, and entropy of zinc in alloys were calculated. Utilizing the phase diagram of the Zn-Sb system, the virtual-cell reactions for both binary compounds were determined, based on which their standard hermodynamic functions of formation and standard entropies were calculated. A comparative analysis of the obtained results with available literature data was carried out. The results of the current work are highly accurate and can be considered a new contribution to the thermodynamics of zinc antimonides
- 1 December 2024
- Published by Pleiades Publishing Ltd in Russian Journal of Physical Chemistry A
- Vol. 98 (14) , 3522-3529
Thermodynamic Properties of Iron-Gallium Sulfides
Results are presented from a thermodynamic study of compounds with a layered FeGa2S4 and Fe2Ga2S5 structure. The EMF is measured for concentration chains of the type (−) FeS(solid)|glycerol + KCl + FeCl2|(Fe in alloy) (+) in the 300–390 K range of temperatures. Results from X-ray diffraction analysis and data in the literature are used to establish the nature of solid-phase equilibria in the system Fe–Ga–S in the area of compositions FeS–Ga2S3–S. The formation of the above ternary compounds and a wide range of solid solutions based on Ga2S3 is confirmed. Partial molar functions of iron in ternary alloys are determined by combining thermodynamic data calculated from measurements of the EMF and the thermodynamic functions in the literature for compounds FeS2 and FeS. These partial molar values and thermodynamic data for Ga2S3 are used to calculate the standard entropies and thermodynamic functions of the formation of compounds FeGa2S4 and Fe2Ga2S5, and of solid solutions based on Ga2S3, according to the diagram of solid phase equilibria for subsystem FeS–Ga2S3–S.
- 1 December 2024
- Published by Pleiades Publishing Ltd in Russian Journal of Physical Chemistry A
- Vol. 98 (14) , 3522-3529
Thermodynamic Properties of Iron-Gallium Sulfides
Results are presented from a thermodynamic study of compounds with a layered FeGa2S4 and Fe2Ga2S5 structure. The EMF is measured for concentration chains of the type (−) FeS(solid)|glycerol + KCl + FeCl2|(Fe in alloy) (+) in the 300–390 K range of temperatures. Results from X-ray diffraction analysis and data in the literature are used to establish the nature of solid-phase equilibria in the system Fe–Ga–S in the area of compositions FeS–Ga2S3–S. The formation of the above ternary compounds and a wide range of solid solutions based on Ga2S3 is confirmed. Partial molar functions of iron in ternary alloys are determined by combining thermodynamic data calculated from measurements of the EMF and the thermodynamic functions in the literature for compounds FeS2 and FeS. These partial molar values and thermodynamic data for Ga2S3 are used to calculate the standard entropies and thermodynamic functions of the formation of compounds FeGa2S4 and Fe2Ga2S5, and of solid solutions based on Ga2S3, according to the diagram of solid phase equilibria for subsystem FeS–Ga2S3–S.
- Open Access
- 7 October 2024
- Published by IntechOpen
Perspective Chapter: Heavy Metals – Sources of Releasing Into Ecosystems, Biological Importance, Toxicity, and Sorption Methods
Environmental pollution with heavy metals is one of the most important environmental problems of this century. Bioaccumulating in the food chain, heavy metals exhibit high toxicity toward living organisms. To prevent serious risks to human health, eliminating the toxicity of these metals in air, soil, and water is of great importance. The chapter reviews modern data on the distribution of heavy metals in the environment, living organisms, their toxicity, and the development of new effective sorbents for their removal from the environment and living organisms. A large number of studies are devoted to the synthesis, modification, and properties of new effective sorption materials toward heavy metals. New information is presented in the field of application of the enterosorption method as one of the promising areas for removing heavy metals from the living organism, as well as in the prophylaxis and treatment of various diseases.
- 7 October 2024
- Published by IntechOpen
Open AccessPerspective Chapter: Heavy Metals – Sources of Releasing Into Ecosystems, Biological Importance, Toxicity, and Sorption Methods
Environmental pollution with heavy metals is one of the most important environmental problems of this century. Bioaccumulating in the food chain, heavy metals exhibit high toxicity toward living organisms. To prevent serious risks to human health, eliminating the toxicity of these metals in air, soil, and water is of great importance. The chapter reviews modern data on the distribution of heavy metals in the environment, living organisms, their toxicity, and the development of new effective sorbents for their removal from the environment and living organisms. A large number of studies are devoted to the synthesis, modification, and properties of new effective sorption materials toward heavy metals. New information is presented in the field of application of the enterosorption method as one of the promising areas for removing heavy metals from the living organism, as well as in the prophylaxis and treatment of various diseases.