ARAzimova Gunel Ramiz

Azimova Gunel Ramiz

*This is an algorithmically generated author record based on publicly available information.

Azimova Gunel Ramiz has a total of 12 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    The effect of catalyst composition and surface properties on the selective catalytic dehydrogenation of bioethanol

    by Gunel Azimova, Selime Mammadova, Turana Babayeva, Konul Alakbarova, Vilayet Mammadov, Tianjin Li, Elmir Babayev

    The article provides a comparative analysis of bioethanol dehydrogenation using Cr-Cu-O and Ce-Cu-O catalyst systems. For the Cr-Cu- O catalysts, bioethanol is converted into a range of products including acetaldehyde, acetone, ethylene. Advanced characterization revealed that these catalysts are structurally complex, containing not only just individual copper and chromium oxides but also a distinct compound, \mathrm{Cu_2} $ \mathrm{CrO_4} . A key finding is the clear structure-property relationship: the catalyst's crystallinity, which varied widely from 41.9% (mostly amorphous) to 73.8% (highly crystalline), has a major effect on its catalytic activity. The Ce-Cu-O system converted bioethanol into a diverse mixture of products such as acetaldehyde, acetone, and ethyl acetate, indicating the occurence of multiple simultaneous reactions, including dehydrogenation and condensation. Most compositions result in separate CeO2 and CuO phases; however, a specific Ce:Cu ratio of 1:9 is unique. At this ratio, the material reduced to form \mathrm{CeO_2} $ with elemental copper, rather than CuO, and its crystallinity increases from 52.7% to 71.2%. The research shows that structural order is crucial for steering the reaction pathway, as only catalysts with low crystallinity produce ethyl acetate. Furthermore, while the specific surface area of a catalyst (5.0 to 17.0 m2/g in this study) is a key factor in surface-driven reactions such as dehydrogenation, it does not affect all products equally.

  • Open Access

    Cobalt-Containing Oxide Catalysts Obtained by The Sol-Gel Method with Auto-Combustion in The Reaction of Low-Temperature Oxidation of Carbon Monoxide

    by Sima Zulfugarova, Gunel R Azi̇mova, S Z Aleskerova, Dilgam Tagi̇yev

    The reaction of low-temperature oxidation of carbon monoxide is important in the context of air purification and reduction of automotive emissions. Along with the search for active catalytic systems for carbon monoxide oxidation, the development of new energy-saving methods of catalyst synthesis also seems important. Cobalt-iron, cobalt-manganese, cobalt-chromium, cobalt-copper binary and cobalt-manganese-iron, cobalt-copper-iron-containing triple oxide systems for low-temperature oxidation of carbon monoxide into carbon dioxide were synthesized by the sol-gel method with auto-combustion. The samples were analyzed by X-ray diffraction, IR spectral and derivatographic methods of analysis, their specific surface area was measured by the BET method, micro-photographs were taken on a scanning electron microscope. It was established that the resulting binary and ternary cobalt-containing oxide systems are multiphase systems containing ferrites, manganites, and oxides of cobalt, copper, manganese, and iron. The resulting catalysts are active in the low-temperature oxidation of carbon monoxide at 145-180 °C. The activation energy of the CO oxidation reaction on the analyzed oxide systems was revealed by the Arrhenius equation is placed in the range of 17-33 kJ/mol. In the systems, an intensifying effect of the influence of its components on the catalytic activity is observed in the oxide and spinel phases. The Co-Cr=2:1 system, which, along with chromite, also contains cobalt oxide, which is active at a much lower temperature – 145 °C than systems with a Co-Cr=1:1 and 1:2 ratios. A similar dependence was obtained in the Co-Fe=2:1 system, i.e. in a sample that, along with cobalt ferrite, also contains cobalt oxide. On this catalyst, 100% conversion of CO to CO2 occurs at a temperature of 200 °C, and a Co-Fe = 1:2 sample with a stoichiometric ratio of metals, in which the ferritization reaction completely occurs, as experiments have shown, is active only at temperatures above 300 °C. The intensifying effect of the influence of the components on its activity is also observed in three-component systems, in which the complete conversion of CO occurs at a temperature of 145-160 °C. The appearance of various structural defects during short-term combustion of the gel without additional heat treatment, which can potentially be considered as catalytically active centers, on the one hand, and the presence of oxide and spinel phases in the composition of catalysts, which exhibit a mutual reinforcing effect, on the other hand, is demonstrative advantage of this method for the synthesis of active catalysts for low-temperature oxidation of carbon monoxide to dioxide.


  • Microwave Sol-gel Synthesis of Co, Ni, Cu, Mn Ferrites and the Investigation of Their Activity in the Oxidation Reaction of Carbon Monoxide

    by Sima Mamed Zulfugarova, Azimova Gunel Ramiz, Aleskerova Zuleyxa Fikret, Ismailov Etibar Humbat, Litvishkov Yuriy Nikolayevich, Tagiyev Dilqam Babir

    Background: The study effect of microwave radiation on the catalytic properties of transition metal ferrites synthesized by ceramic and sol-gel methods in the oxidation reaction of carbon monoxide into dioxide. Objective: This work aims to study the effect of microwave radiation on the production of cobalt, copper, nickel, and manganese ferrites by sol-gel combustion technology using various organic reagents and to study their catalytic activity in the oxidative conversion of carbon monoxide into dioxide. Methods: Microwave treatment was carried out on a setup based on an EM-G5593V microwave oven (Panasonic) with a magnetron power varying from 300 to 800 W with an operating frequency of 2450 MHz. X-ray phase analysis of the products was carried out on a Bruker D 2Phazer automatic diffractometer. The measurement of the specific surface area of the samples was determined by low-temperature nitrogen adsorption by the multipoint BET method on a SORBI-MS instrument (ZAO META, Russia). IR spectra were recorded using FT-IR LUMOS Bruker spectrometers. The micrographs of samples were analyzed on the Sigma VP (Carl Zeiss Jena) equipment. Results: It was determined that the most active catalysts for the oxidation of carbon monoxide to dioxide are ferrites obtained by the sol-gel combustion method using microwave radiation to "ignite" the gel. Conclusion: The use of microwave radiation in the preparation of ferrites by the sol-gel method with combustion can initiate a self-propagating exothermic combustion reaction in the entire volume of the sample in a very short time, measured in seconds. The catalytic activity in the oxidative conversion of carbon monoxide obtained by this method of ferrites is comparable to the activity of ferrites obtained by the sol-gel method with traditional combustion.