Clara-Maria Kuball
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Clara-Maria Kuball has a total of 13 co-authors. Here are the top co-authors by number of shared publications:
- Marion Merklein
Institute of Manufacturing Technology, Friedrich-Alexander-Universität Erlangen-Nürnberg, Erlangen, Germany
2 shared publications B Uhe
Paderborn University, Laboratory for Material and Joining Technology (LWF), Paderborn, Germany
1 shared publicationBenedikt Uhe
1 shared publication- Benedikt Uhe
Laboratory for Material and Joining Technology (LWF), Paderborn University, Pohlweg 47-49, 33098 Paderborn, Germany
1 shared publication - David Römisch
Institue of Manufacturing Technology, Friedrich-Alexander-Universität Erlangen-Nürnberg, Erlangen, Germany
1 shared publication G Meschut
Paderborn University, Laboratory for Material and Joining Technology (LWF), Paderborn, Germany
1 shared publication
Latest Publications
- Open Access
- 13 May 2024
- Published by Elsevier in Journal of Advanced Joining Processes
- Vol. 9
Cross-process chain influence of process variations in self-piercing riveting with regard to semi-finished product dimensions
- 13 May 2024
- Published by Elsevier in Journal of Advanced Joining Processes
- Vol. 9
Open AccessCross-process chain influence of process variations in self-piercing riveting with regard to semi-finished product dimensions
- Open Access
- 31 October 2023
- Published by MDPI AG in Journal of Manufacturing and Materials Processing
- Vol. 7 (6) , 193
Increased Sustainability in Fastener Production with the Example of Self-Piercing Rivets
The sustainability of the manufacturing industry is of special importance to increase the protection of the environment. The production of fasteners like self-piercing rivets, however, is costly, time-consuming and energy-intensive. The heat treatment and the coating, which are mandatory in conventional self-piercing rivets to achieve adequate strength, ductility and corrosion resistance, are especially crucial in this respect. Within this paper, an approach for an increase in the sustainability in fastener production is presented. The use of alternative, high strain hardening stainless steels as rivet material enables a shortening of the process chain, because post treatment of the rivets after they are formed can be omitted. As the change in rivet material and processing causes some issues along the process chain, the focus of this paper is on the holistic evaluation of the challenges within the forming of high strain hardening steel and the impact of the changed rivet properties on the joining result.
- 31 October 2023
- Published by MDPI AG in Journal of Manufacturing and Materials Processing
- Vol. 7 (6) , 193
Open AccessIncreased Sustainability in Fastener Production with the Example of Self-Piercing Rivets
The sustainability of the manufacturing industry is of special importance to increase the protection of the environment. The production of fasteners like self-piercing rivets, however, is costly, time-consuming and energy-intensive. The heat treatment and the coating, which are mandatory in conventional self-piercing rivets to achieve adequate strength, ductility and corrosion resistance, are especially crucial in this respect. Within this paper, an approach for an increase in the sustainability in fastener production is presented. The use of alternative, high strain hardening stainless steels as rivet material enables a shortening of the process chain, because post treatment of the rivets after they are formed can be omitted. As the change in rivet material and processing causes some issues along the process chain, the focus of this paper is on the holistic evaluation of the challenges within the forming of high strain hardening steel and the impact of the changed rivet properties on the joining result.
- Open Access
- 5 May 2023
- Published by EDP Sciences in Mechanics & Industry
- Vol. 24, 16
Mechanical joining of high-strength multi-material systems − trends and innovations
In conjunction with mechanical joining processes. Mechanical joining processes play a key role for the realization of multi-material lightweight structures, which are essential with regard to environmental protection. However, joining of dissimilar high-strength materials is challenging due to the varying properties of the joining partners and due to their high flow stresses and often limited ductility. Thus, the evolution of established processes as well as the development of innovative and highly productive joining technologies are necessary. Requirements for a highly volatile production environment are versatility, flexibility, resilience and robustness. Within this contribution, current trends and innovations related to selected mechanical joining processes for enabling the material mix are outlined in order to point out opportunities to address these requirements in the future. In this context, joining using cold formed pin structures is presented as a promising approach for connecting dissimilar materials like metals to fibre-reinforced plastics. Furthermore, it is shown how the shear-clinching technology can be combined with a process-adapted application of locally limited heat treatment in order to promote the joinability and control the material flow during joining. A novel approach for reducing process forces and expanding process windows is the use of ultrasonic assistance for mechanical joining operations, which is demonstrated by the example of a nut staking process with superimposed high frequency oscillation. As concerns the widely used self-piercing riveting technique, current research activities relate not only to the further development of the joining process itself, for example by combining self-piercing riveting and tumbling, but also to the use of new rivet materials like high strain hardening stainless steels. In addition, the evolution towards mechanical joining 4.0 against the background of data-based process control in conjunction with of mechanical joining processes is also subject of the considerations.
- 5 May 2023
- Published by EDP Sciences in Mechanics & Industry
- Vol. 24, 16
Open AccessMechanical joining of high-strength multi-material systems − trends and innovations
In conjunction with mechanical joining processes. Mechanical joining processes play a key role for the realization of multi-material lightweight structures, which are essential with regard to environmental protection. However, joining of dissimilar high-strength materials is challenging due to the varying properties of the joining partners and due to their high flow stresses and often limited ductility. Thus, the evolution of established processes as well as the development of innovative and highly productive joining technologies are necessary. Requirements for a highly volatile production environment are versatility, flexibility, resilience and robustness. Within this contribution, current trends and innovations related to selected mechanical joining processes for enabling the material mix are outlined in order to point out opportunities to address these requirements in the future. In this context, joining using cold formed pin structures is presented as a promising approach for connecting dissimilar materials like metals to fibre-reinforced plastics. Furthermore, it is shown how the shear-clinching technology can be combined with a process-adapted application of locally limited heat treatment in order to promote the joinability and control the material flow during joining. A novel approach for reducing process forces and expanding process windows is the use of ultrasonic assistance for mechanical joining operations, which is demonstrated by the example of a nut staking process with superimposed high frequency oscillation. As concerns the widely used self-piercing riveting technique, current research activities relate not only to the further development of the joining process itself, for example by combining self-piercing riveting and tumbling, but also to the use of new rivet materials like high strain hardening stainless steels. In addition, the evolution towards mechanical joining 4.0 against the background of data-based process control in conjunction with of mechanical joining processes is also subject of the considerations.
- 5 January 2022
- Published by SAGE Publications in Proceedings of the Institution of Mechanical Engineers, Part L: Journal of Materials: Design and Applications
- Vol. 236 (6) , 1285-1301
Process-adapted temperature application within a two-stage rivet forming process for high nitrogen steel
Mechanical joining technologies like self-piercing riveting are gaining importance with regard to environmental protection, as they enable multi-material design and lightweight construction. A new approach is the use of high nitrogen steel as rivet material, which allows to omit the usually necessary heat treatment and coating and thus leads to a shortening of the process chain. Due to the high strain hardening, however, high tool loads must be expected. Thus, appropriate forming strategies are needed. Within this contribution, the influence of applying different temperatures for each forming stage in a two-stage rivet forming process using the high nitrogen steel 1.3815 is investigated. The findings provide a basic understanding of the influence of the temperature management when forming high nitrogen steel. For this purpose, the rivets are not formed at the same temperature in each stage, but an elevated temperature is applied selectively. Different process routes are investigated. First, cups are manufactured in stage 1 at room temperature, followed by stage 2 at 200°C. Second, cups are formed in stage 1 at 200°C and used for stage 2 at room temperature. By comparing the findings with results when applying the same temperature in both stages, it is shown that the temperature during the first forming operation has an effect on the forming behaviour during the second forming stage. The required forming forces and the resulting rivet hardness can be influenced by process-adapted temperature application. Furthermore, the causes for the temperature impact on the residual cup thickness in stage 1 are evaluated by a cause and effect analysis, which provides a deeper process understanding. The thermal expansion of the tool and the billet as well as the improved forming behaviour at 200°C are identified as the main influencing causes on the achieved residual cup thickness.
- 5 January 2022
- Published by SAGE Publications in Proceedings of the Institution of Mechanical Engineers, Part L: Journal of Materials: Design and Applications
- Vol. 236 (6) , 1285-1301
Process-adapted temperature application within a two-stage rivet forming process for high nitrogen steel
Mechanical joining technologies like self-piercing riveting are gaining importance with regard to environmental protection, as they enable multi-material design and lightweight construction. A new approach is the use of high nitrogen steel as rivet material, which allows to omit the usually necessary heat treatment and coating and thus leads to a shortening of the process chain. Due to the high strain hardening, however, high tool loads must be expected. Thus, appropriate forming strategies are needed. Within this contribution, the influence of applying different temperatures for each forming stage in a two-stage rivet forming process using the high nitrogen steel 1.3815 is investigated. The findings provide a basic understanding of the influence of the temperature management when forming high nitrogen steel. For this purpose, the rivets are not formed at the same temperature in each stage, but an elevated temperature is applied selectively. Different process routes are investigated. First, cups are manufactured in stage 1 at room temperature, followed by stage 2 at 200°C. Second, cups are formed in stage 1 at 200°C and used for stage 2 at room temperature. By comparing the findings with results when applying the same temperature in both stages, it is shown that the temperature during the first forming operation has an effect on the forming behaviour during the second forming stage. The required forming forces and the resulting rivet hardness can be influenced by process-adapted temperature application. Furthermore, the causes for the temperature impact on the residual cup thickness in stage 1 are evaluated by a cause and effect analysis, which provides a deeper process understanding. The thermal expansion of the tool and the billet as well as the improved forming behaviour at 200°C are identified as the main influencing causes on the achieved residual cup thickness.