Do Thi My Phuong
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Research Interests
Do Thi My Phuong has a total of 8 co-authors. Here are the top co-authors by number of shared publications:
- Xuan Loc Nguyen
Can Tho University
6 shared publications Nguyen Xuan Loc
Department of Environmental Science, College of the Environment and Natural Resources, Can Tho University, Can Tho, Vietnam
2 shared publications- Le Chi Mai
College of Environment and Natural Resources Can Tho University học Cần Nam Viet
1 shared publication Nguyen Thi Anh Thu
Department of Environmental Science, College of the Environment and Natural Resources, Can Tho University, Can Tho, Vietnam
1 shared publicationNguyen Thi Thanh Thao
1 shared publicationNguyen Tran Trung Thanh
Department of Environmental Science, College of the Environment and Natural Resources, Can Tho University, Can Tho, Vietnam
1 shared publication
Latest Publications
- 3 September 2026
- Published by Springer Nature in Plant and Soil
- Vol. 527 (2) , 2117-2136
Relationships among soil chemical properties, plant physiological responses, and rice (Oryza sativa L.) performance under irrigation salinity
- 3 September 2026
- Published by Springer Nature in Plant and Soil
- Vol. 527 (2) , 2117-2136
Relationships among soil chemical properties, plant physiological responses, and rice (Oryza sativa L.) performance under irrigation salinity
- Open Access
- 22 August 2026
- Published by SAGE Publications in Adsorption Science & Technology
- Vol. 44
Valorization of oyster shell waste into hydroxyapatite for removal of Cr(VI) and As(III) from water
The valorization of oyster shell waste into functional materials provides a sustainable pathway for water treatment within a circular economy framework. In this study, hydroxyapatite (HAp) was synthesized from oyster shell waste and applied for the removal of Cr(VI) and As(III) from aqueous solutions. The synthesized HAp exhibited a predominantly mesoporous structure (88.94%), a specific surface area of 6.94 m 2 /g, and aggregated particles of 2–3 μm, with Ca–P phases and functional groups (CO 3 2- , OH - , PO 4 3- ) contributing to adsorption. Batch experiments indicated that removal efficiency was strongly influenced by pH, adsorbent dosage, contact time, and initial concentration. Under optimal conditions (90 min, 0.05 g, 10 mg/L), the maximum adsorption capacities reached 139.37 mg/g for Cr(VI) (92% removal) and 17.18 mg/g for As(III) (43.8% removal), demonstrating clear selectivity toward Cr(VI). Adsorption behavior followed the Freundlich isotherm and Elovich kinetic model, indicating heterogeneous and multi-step interactions. The higher adsorption capacity observed for Cr(VI) in the single-solute systems investigated in this study may be attributed to the favorable interaction of chromate species with reactive sites on the HAp surface, whereas As(III), which predominantly exists as neutral H 3 AsO 3 under near-neutral conditions, exhibited lower adsorption efficiency. These observations highlight the influence of contaminant speciation on adsorption performance. Overall, oyster shell-derived HAp represents a low-cost and effective adsorbent for the removal of Cr(VI) and As(III) from aqueous solutions.
- 22 August 2026
- Published by SAGE Publications in Adsorption Science & Technology
- Vol. 44
Open AccessValorization of oyster shell waste into hydroxyapatite for removal of Cr(VI) and As(III) from water
The valorization of oyster shell waste into functional materials provides a sustainable pathway for water treatment within a circular economy framework. In this study, hydroxyapatite (HAp) was synthesized from oyster shell waste and applied for the removal of Cr(VI) and As(III) from aqueous solutions. The synthesized HAp exhibited a predominantly mesoporous structure (88.94%), a specific surface area of 6.94 m 2 /g, and aggregated particles of 2–3 μm, with Ca–P phases and functional groups (CO 3 2- , OH - , PO 4 3- ) contributing to adsorption. Batch experiments indicated that removal efficiency was strongly influenced by pH, adsorbent dosage, contact time, and initial concentration. Under optimal conditions (90 min, 0.05 g, 10 mg/L), the maximum adsorption capacities reached 139.37 mg/g for Cr(VI) (92% removal) and 17.18 mg/g for As(III) (43.8% removal), demonstrating clear selectivity toward Cr(VI). Adsorption behavior followed the Freundlich isotherm and Elovich kinetic model, indicating heterogeneous and multi-step interactions. The higher adsorption capacity observed for Cr(VI) in the single-solute systems investigated in this study may be attributed to the favorable interaction of chromate species with reactive sites on the HAp surface, whereas As(III), which predominantly exists as neutral H 3 AsO 3 under near-neutral conditions, exhibited lower adsorption efficiency. These observations highlight the influence of contaminant speciation on adsorption performance. Overall, oyster shell-derived HAp represents a low-cost and effective adsorbent for the removal of Cr(VI) and As(III) from aqueous solutions.
- Open Access
- 13 November 2025
- Published by SAGE Publications in Adsorption Science & Technology
- Vol. 43
Enhancement of hexavalent chromium adsorption by hydroxyapatite-modified biochar derived from Mimosa pigra invasive plant
Chromium (VI) contamination in water presents significant environmental and public health challenges, demanding efficient and sustainable remediation strategies. This study explores the use of biochar (BC) derived from the invasive plant Mimosa pigra, modified with hydroxyapatite (HAp), to form a composite (BC@HAp) for effective Cr VI removal. HAp is known for its high adsorption capacity and biocompatibility, and its incorporation into BC enhances heavy metal removal through synergistic effects. BC and BC@HAp were synthesized via the sol–gel method and tested under various conditions including pH, adsorbent dosage, Cr VI concentration, contact time, and temperature. Structural and morphological analyses confirmed improved surface characteristics of BC@HAp. The composite exhibited a significantly higher Cr VI adsorption capacity (67.68 mg/g) compared to unmodified BC (39.95 mg/g), attributed to increased surface area and new functional moieties. The adsorption mechanism was facilitated by electrostatic attraction between Cr VI anions (HCrO 4 − , Cr 2 O 7 2− ) and positively charged Ca 2+ sites, ion exchange with surface carbonate and phosphate groups, and surface complexation involving hydroxyl (–OH) and carboxyl (–COOH) groups. Adsorption followed the Freundlich and Temkin isotherms, indicating heterogeneous surface interactions, and was best described by the Elovich kinetic model. Thermodynamic parameters revealed the process to be spontaneous and endothermic, favoring higher temperatures. The enhanced performance of BC@HAp demonstrates its potential as a cost-effective and eco-friendly solution for both Cr VI remediation and invasive species utilization.
- 13 November 2025
- Published by SAGE Publications in Adsorption Science & Technology
- Vol. 43
Open AccessEnhancement of hexavalent chromium adsorption by hydroxyapatite-modified biochar derived from Mimosa pigra invasive plant
Chromium (VI) contamination in water presents significant environmental and public health challenges, demanding efficient and sustainable remediation strategies. This study explores the use of biochar (BC) derived from the invasive plant Mimosa pigra, modified with hydroxyapatite (HAp), to form a composite (BC@HAp) for effective Cr VI removal. HAp is known for its high adsorption capacity and biocompatibility, and its incorporation into BC enhances heavy metal removal through synergistic effects. BC and BC@HAp were synthesized via the sol–gel method and tested under various conditions including pH, adsorbent dosage, Cr VI concentration, contact time, and temperature. Structural and morphological analyses confirmed improved surface characteristics of BC@HAp. The composite exhibited a significantly higher Cr VI adsorption capacity (67.68 mg/g) compared to unmodified BC (39.95 mg/g), attributed to increased surface area and new functional moieties. The adsorption mechanism was facilitated by electrostatic attraction between Cr VI anions (HCrO 4 − , Cr 2 O 7 2− ) and positively charged Ca 2+ sites, ion exchange with surface carbonate and phosphate groups, and surface complexation involving hydroxyl (–OH) and carboxyl (–COOH) groups. Adsorption followed the Freundlich and Temkin isotherms, indicating heterogeneous surface interactions, and was best described by the Elovich kinetic model. Thermodynamic parameters revealed the process to be spontaneous and endothermic, favoring higher temperatures. The enhanced performance of BC@HAp demonstrates its potential as a cost-effective and eco-friendly solution for both Cr VI remediation and invasive species utilization.
- Open Access
- 1 February 2025
- Published by SAGE Publications in Adsorption Science & Technology
- Vol. 43
Optimization and modeling of Pb 2+ ions adsorption on bentonite and HNO 3 -activated bentonite using Taguchi and ANOVA methods
This study investigates the activation of bentonite using HNO 3 and its application for Pb 2+ adsorption. Physical-chemical analyses (Brunauer–Emmett–Teller, X-ray diffraction, and Fourier transform infrared) revealed that HNO 3 activation enhanced the surface area and altered the structural characteristics of bentonite. Adsorption experiments, designed using the Taguchi method (L25, four factors, five levels), identified contact time as the most influential factor for Pb 2+ removal. The maximum Pb 2+ adsorption capacity of HNO 3 -activated bentonite was 1.3 times higher than raw bentonite (61.77 mg/g vs 48.22 mg/g). Adsorption isotherms fitted well with the Temkin model (R 2 > 0.9, χ 2 < 0.15), and kinetic data followed the Elovich model (R 2 > 0.91, χ 2 < 1.44). The initial sorption rate (α) for HNO 3 -activated bentonite was 1.12 times greater than that of bentonite, indicating enhanced adsorption kinetics. This study demonstrates the effectiveness of HNO 3 -activated bentonite for efficient Pb 2+ removal from aqueous solutions.
- 1 February 2025
- Published by SAGE Publications in Adsorption Science & Technology
- Vol. 43
Open AccessOptimization and modeling of Pb 2+ ions adsorption on bentonite and HNO 3 -activated bentonite using Taguchi and ANOVA methods
This study investigates the activation of bentonite using HNO 3 and its application for Pb 2+ adsorption. Physical-chemical analyses (Brunauer–Emmett–Teller, X-ray diffraction, and Fourier transform infrared) revealed that HNO 3 activation enhanced the surface area and altered the structural characteristics of bentonite. Adsorption experiments, designed using the Taguchi method (L25, four factors, five levels), identified contact time as the most influential factor for Pb 2+ removal. The maximum Pb 2+ adsorption capacity of HNO 3 -activated bentonite was 1.3 times higher than raw bentonite (61.77 mg/g vs 48.22 mg/g). Adsorption isotherms fitted well with the Temkin model (R 2 > 0.9, χ 2 < 0.15), and kinetic data followed the Elovich model (R 2 > 0.91, χ 2 < 1.44). The initial sorption rate (α) for HNO 3 -activated bentonite was 1.12 times greater than that of bentonite, indicating enhanced adsorption kinetics. This study demonstrates the effectiveness of HNO 3 -activated bentonite for efficient Pb 2+ removal from aqueous solutions.
- 26 December 2024
- Published by Springer Nature in Environment, Development and Sustainability
- Vol. 28 (10) , 1-57
A review of thermochemical decomposition techniques for biochar production
- 26 December 2024
- Published by Springer Nature in Environment, Development and Sustainability
- Vol. 28 (10) , 1-57
A review of thermochemical decomposition techniques for biochar production
- Open Access
- 1 January 2023
- Published by Wydawnictwo Naukowe Gabriel Borowski (WNGB) in Journal of Ecological Engineering
- Vol. 24 (1) , 248-259
Preparing Shrimp Shell-Derived Chitosan with Rice Husk-Derived Biochar for Efficient Safranin O Removal from Aqueous Solution
In this study, the shrimp shell-derived chitosan was coated onto rice husk-derived biochar to form chitosan/biochar bio-composite beads. The physicochemical properties of biochar (BC) and chitosan/biochar beads (CS@BC) were characterized by BET, SEM-EDX, FTIR, and pHpzc analyses, which were then...
- 1 January 2023
- Published by Wydawnictwo Naukowe Gabriel Borowski (WNGB) in Journal of Ecological Engineering
- Vol. 24 (1) , 248-259
Open AccessPreparing Shrimp Shell-Derived Chitosan with Rice Husk-Derived Biochar for Efficient Safranin O Removal from Aqueous Solution
In this study, the shrimp shell-derived chitosan was coated onto rice husk-derived biochar to form chitosan/biochar bio-composite beads. The physicochemical properties of biochar (BC) and chitosan/biochar beads (CS@BC) were characterized by BET, SEM-EDX, FTIR, and pHpzc analyses, which were then...
- Open Access
Chitosan-Modified Biochar and Unmodified Biochar for Methyl Orange: Adsorption Characteristics and Mechanism Exploration
In this study, shrimp shell-derived chitosan (CS) and rice husk-derived biochar (RHB) were produced; CS and RHB were then used to synthesize chitosan-modified biochar (CSBC) hydrogel beads. N2 adsorption (77K), SEM-EDX and FT-IR techniques were used to evaluate the physicochemical properties of the adsorbents. A batch experiment was conducted to test the methyl orange (MO) adsorption performance of RHB and CSBC. The results showed that the MO adsorption process was strongly pH-dependent. The kinetics were well described by the pseudo-second-order and intra-particle diffusion models, assuming the chemisorption and intraparticle diffusion mechanisms govern the adsorption process. Homogeneous adsorption for MO on the surface of RHB and CSBC was also assumed since the isotherm data showed the best-fit to the Langmuir model. Under the experimental conditions of initial pH 3, dosage 0.2 g, contact time 240 min and temperature 298 K, the maximum adsorption capacity of CSBC and RHB for MO dye adsorption was 38.75 mg.g−1 and 31.63 mg.g−1, respectively. This result demonstrated that biochar had better performance after modification with chitosan, which provided more functional groups (i.e., −NH2 and −OH groups) for enhanced electrostatic interactions and complexation between MO and CSBC. Overall, CSBC is an effective adsorbent for the removal of MO from aqueous solution.
Open AccessChitosan-Modified Biochar and Unmodified Biochar for Methyl Orange: Adsorption Characteristics and Mechanism Exploration
In this study, shrimp shell-derived chitosan (CS) and rice husk-derived biochar (RHB) were produced; CS and RHB were then used to synthesize chitosan-modified biochar (CSBC) hydrogel beads. N2 adsorption (77K), SEM-EDX and FT-IR techniques were used to evaluate the physicochemical properties of the adsorbents. A batch experiment was conducted to test the methyl orange (MO) adsorption performance of RHB and CSBC. The results showed that the MO adsorption process was strongly pH-dependent. The kinetics were well described by the pseudo-second-order and intra-particle diffusion models, assuming the chemisorption and intraparticle diffusion mechanisms govern the adsorption process. Homogeneous adsorption for MO on the surface of RHB and CSBC was also assumed since the isotherm data showed the best-fit to the Langmuir model. Under the experimental conditions of initial pH 3, dosage 0.2 g, contact time 240 min and temperature 298 K, the maximum adsorption capacity of CSBC and RHB for MO dye adsorption was 38.75 mg.g−1 and 31.63 mg.g−1, respectively. This result demonstrated that biochar had better performance after modification with chitosan, which provided more functional groups (i.e., −NH2 and −OH groups) for enhanced electrostatic interactions and complexation between MO and CSBC. Overall, CSBC is an effective adsorbent for the removal of MO from aqueous solution.
- Open Access
Rice Straw Biochar and Magnetic Rice Straw Biochar for Safranin O Adsorption from Aqueous Solution
This study investigates the adsorption of Safranin O (SO) from aqueous solution by both biochar and magnetic biochar derived from rice straw. Rice straw biochar (RSB) was made by pyrolysis in a furnace at 500 °C, using a heating rate of 10 °C·min−1 for 2 h in an oxygen-limited environment, whilst the magnetic rice straw biochar (MRSB) was produced via the chemical precipitation of Fe2+ and Fe3+. The physicochemical properties of the synthesized biochars were characterized using SEM, SEM- EDX, XRD, FTIR techniques, and N2 adsorption (77 K) and pHpzc measurements. Batch adsorption experiments were used to explore the effect of pH, biochar dosage, kinetics, and isotherms on the adsorption of SO. Experimental data of RSB and MRSB fit well into both Langmuir and Freundlich isotherm models, and were also well-explained by the Lagergren pseudo-second-order kinetic model. The maximum SO adsorption capacity of MRSB was found to be 41.59 mg/g, while for RSB the figure was 31.06 mg/g. The intra-particle diffusion model indicated that the intra-particle diffusion may not be the only rate-limiting step. The collective physical and chemical forces account for the adsorption mechanism of SO molecules by both RSB and MRSB adsorbents. The obtained results demonstrated that the magnetic biochar can partially enhance the SO adsorption capacity of its precursor biochar and also be easily separated from the solution by using an external magnet.
Open AccessRice Straw Biochar and Magnetic Rice Straw Biochar for Safranin O Adsorption from Aqueous Solution
This study investigates the adsorption of Safranin O (SO) from aqueous solution by both biochar and magnetic biochar derived from rice straw. Rice straw biochar (RSB) was made by pyrolysis in a furnace at 500 °C, using a heating rate of 10 °C·min−1 for 2 h in an oxygen-limited environment, whilst the magnetic rice straw biochar (MRSB) was produced via the chemical precipitation of Fe2+ and Fe3+. The physicochemical properties of the synthesized biochars were characterized using SEM, SEM- EDX, XRD, FTIR techniques, and N2 adsorption (77 K) and pHpzc measurements. Batch adsorption experiments were used to explore the effect of pH, biochar dosage, kinetics, and isotherms on the adsorption of SO. Experimental data of RSB and MRSB fit well into both Langmuir and Freundlich isotherm models, and were also well-explained by the Lagergren pseudo-second-order kinetic model. The maximum SO adsorption capacity of MRSB was found to be 41.59 mg/g, while for RSB the figure was 31.06 mg/g. The intra-particle diffusion model indicated that the intra-particle diffusion may not be the only rate-limiting step. The collective physical and chemical forces account for the adsorption mechanism of SO molecules by both RSB and MRSB adsorbents. The obtained results demonstrated that the magnetic biochar can partially enhance the SO adsorption capacity of its precursor biochar and also be easily separated from the solution by using an external magnet.