Christian Aulin
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Christian Aulin has a total of 14 co-authors. Here are the top co-authors by number of shared publications:
- Tiffany Abitbol
Sustainable Materials Laboratory Institute of Materials École Polytechnique Fédérale de Lausanne Lausanne 1015 Switzerland
3 shared publications - Johanna Lahti
Paper Converting and Packaging, Tampere University, Tampere, Finland
2 shared publications - Jurkka Kuusipalo
Tampere University of Technology
2 shared publications - Martti Toivakka
Laboratory of Natural Materials Technology, Åbo Akademi University, Turku, Finland
2 shared publications - Rajesh Koppolu
VTT Technical Research Centre of Finland Ltd., P.O. Box 1000, 02044 Espoo, Finland
2 shared publications - Aiman Chbani
Energy and Engineering, ARTS Department, Leitat Technological Center, C/de la Innovació, 2, 08225 Barcelona, Spain
1 shared publication
Latest Publications
- Open Access
- 11 June 2023
- Published by Springer Nature in Cellulose
- Vol. 30 (11) , 6945-6958
Tailoring the performance of nanocellulose-based multilayer-barrier paperboard using biodegradable-thermoplastics, pigments, and plasticizers
In this work a multilayer barrier paperboard was produced in a roll-to-roll process by slot-die coating of nanocellulose (microfibrillated cellulose or carboxymethylated cellulose nanofibrils) followed by extrusion coating of biodegradable thermoplastics (polylactic acid, polybutylene adipate terephthalate and polybutylene succinate). Hyperplaty kaolin pigments were blended in different ratios into nanocellulose to tailor the barrier properties of the multilayer structure and to study their influence on adhesion to the thermoplastic top layer. Influence of a plasticizer (glycerol) on flexibility and barrier performance of the multilayer structure was also examined. Water vapor permeance for the multilayer paperboard was below that of control single-layer thermoplastic materials, and oxygen permeance of the coated structure was similar or lower than that of pure nanocellulose films. Glycerol as a plasticizer further lowered the oxygen permeance and kaolin addition improved the adhesion at the nanocellulose/thermoplastic interface. The results provide insight into the role played by nanocelluloses, thermoplastics, pigments, and plasticizers on the barrier properties when these elements are processed together into multilayer structures, and paves the way for industrial production of sustainable packaging.
- 11 June 2023
- Published by Springer Nature in Cellulose
- Vol. 30 (11) , 6945-6958
Open AccessTailoring the performance of nanocellulose-based multilayer-barrier paperboard using biodegradable-thermoplastics, pigments, and plasticizers
In this work a multilayer barrier paperboard was produced in a roll-to-roll process by slot-die coating of nanocellulose (microfibrillated cellulose or carboxymethylated cellulose nanofibrils) followed by extrusion coating of biodegradable thermoplastics (polylactic acid, polybutylene adipate terephthalate and polybutylene succinate). Hyperplaty kaolin pigments were blended in different ratios into nanocellulose to tailor the barrier properties of the multilayer structure and to study their influence on adhesion to the thermoplastic top layer. Influence of a plasticizer (glycerol) on flexibility and barrier performance of the multilayer structure was also examined. Water vapor permeance for the multilayer paperboard was below that of control single-layer thermoplastic materials, and oxygen permeance of the coated structure was similar or lower than that of pure nanocellulose films. Glycerol as a plasticizer further lowered the oxygen permeance and kaolin addition improved the adhesion at the nanocellulose/thermoplastic interface. The results provide insight into the role played by nanocelluloses, thermoplastics, pigments, and plasticizers on the barrier properties when these elements are processed together into multilayer structures, and paves the way for industrial production of sustainable packaging.
- Open Access
- 16 February 2023
- Published by Springer Nature in Research Square
Tailoring the Performance of Nanocellulose-based Multilayer-Barrier Paperboard using Biodegradable-Thermoplastics, Pigments, and Plasticizers
In this work a multilayer barrier paperboard was produced in a roll-to-roll process by slot-die coating of nanocellulose (microfibrillated cellulose (MFC) or carboxymethylated cellulose nanofibrils (CNF)) followedby extrusion coating of biodegradable thermoplastics (polylactic acid (PLA), polybutylene adipate terephthalate (PBAT) and polybutylene succinate (PBS)). Hyperplaty kaolin pigments were blended in different ratios into nanocellulose to tailor the barrier properties of the multilayer structure and to study their influence on adhesion to the thermoplastic top layer. Influence of a plasticizer (glycerol) on flexibility and barrier performance of the multilayer structure was also examined.Water vapor permeance for the multilayer paperboard was below that of control single-layer thermoplastic materials, and oxygen permeance of the coated structure was similar or lower than that of pure nanocellulose films. Glycerol as a plasticizer further lowered the oxygen permeance and kaolin addition improved the adhesion at the nanocellulose/thermoplastic interface.The results provide insight into the role played by nanocelluloses, thermoplastics, pigments, and plasticizers on the barrier properties when these elements are processed together into multilayer structures, and paves the way for industrial production of sustainable packaging.
- 16 February 2023
- Published by Springer Nature in Research Square
Open AccessTailoring the Performance of Nanocellulose-based Multilayer-Barrier Paperboard using Biodegradable-Thermoplastics, Pigments, and Plasticizers
In this work a multilayer barrier paperboard was produced in a roll-to-roll process by slot-die coating of nanocellulose (microfibrillated cellulose (MFC) or carboxymethylated cellulose nanofibrils (CNF)) followedby extrusion coating of biodegradable thermoplastics (polylactic acid (PLA), polybutylene adipate terephthalate (PBAT) and polybutylene succinate (PBS)). Hyperplaty kaolin pigments were blended in different ratios into nanocellulose to tailor the barrier properties of the multilayer structure and to study their influence on adhesion to the thermoplastic top layer. Influence of a plasticizer (glycerol) on flexibility and barrier performance of the multilayer structure was also examined.Water vapor permeance for the multilayer paperboard was below that of control single-layer thermoplastic materials, and oxygen permeance of the coated structure was similar or lower than that of pure nanocellulose films. Glycerol as a plasticizer further lowered the oxygen permeance and kaolin addition improved the adhesion at the nanocellulose/thermoplastic interface.The results provide insight into the role played by nanocelluloses, thermoplastics, pigments, and plasticizers on the barrier properties when these elements are processed together into multilayer structures, and paves the way for industrial production of sustainable packaging.
- Open Access
- 15 January 2022
- Published by MDPI AG in Nanomaterials
- Vol. 12 (2) , 273
Sustainable and Printable Nanocellulose-Based Ionogels as Gel Polymer Electrolytes for Supercapacitors
A new gel polymer electrolyte (GPE) based supercapacitor with an ionic conductivity up to 0.32–0.94 mS cm−2 has been synthesized from a mixture of an ionic liquid (IL) with nanocellulose (NC). The new NC-ionogel was prepared by combining the IL 1-ethyl-3-methylimidazolium dimethyl phosphate (EMIMP) with carboxymethylated cellulose nanofibers (CNFc) at different ratios (CNFc ratio from 1 to 4). The addition of CNFc improved the ionogel properties to become easily printable onto the electrode surface. The new GPE based supercapacitor cell showed good electrochemical performance with specific capacitance of 160 F g−1 and an equivalent series resistance (ESR) of 10.2 Ω cm−2 at a current density of 1 mA cm−2. The accessibility to the full capacitance of the device is demonstrated after the addition of CNFc in EMIMP compared to the pristine EMIMP (99 F g−1 and 14.7 Ω cm−2).
- 15 January 2022
- Published by MDPI AG in Nanomaterials
- Vol. 12 (2) , 273
Open AccessSustainable and Printable Nanocellulose-Based Ionogels as Gel Polymer Electrolytes for Supercapacitors
A new gel polymer electrolyte (GPE) based supercapacitor with an ionic conductivity up to 0.32–0.94 mS cm−2 has been synthesized from a mixture of an ionic liquid (IL) with nanocellulose (NC). The new NC-ionogel was prepared by combining the IL 1-ethyl-3-methylimidazolium dimethyl phosphate (EMIMP) with carboxymethylated cellulose nanofibers (CNFc) at different ratios (CNFc ratio from 1 to 4). The addition of CNFc improved the ionogel properties to become easily printable onto the electrode surface. The new GPE based supercapacitor cell showed good electrochemical performance with specific capacitance of 160 F g−1 and an equivalent series resistance (ESR) of 10.2 Ω cm−2 at a current density of 1 mA cm−2. The accessibility to the full capacitance of the device is demonstrated after the addition of CNFc in EMIMP compared to the pristine EMIMP (99 F g−1 and 14.7 Ω cm−2).
- 22 October 2021
- Published by Walter de Gruyter GmbH in Nordic Pulp & Paper Research Journal
- Vol. 37 (1) , 138-148
Enhanced mechanical and gas barrier performance of plasticized cellulose nanofibril films
Cellulose nanofibrils (CNF) are mixed with plasticizers; sorbitol and glycerol, through high-pressure homogenization to prepare multifunctional biohybrid films. The resulting plasticized films obtained after solvent evaporation are strong, flexible and demonstrate superior toughness and optical transparency. The oxygen barrier properties of the biohybrid films outperform commercial packaging materials. The sorbitol-plasticized CNF films possess excellent oxygen barrier properties, 0.34 cm3·μm/m2·day·kPa at 50 % relative humidity, while significantly enhancing the toughness and fracture strength of the films. CNF films plasticized by 20 wt.% of sorbitol and glycerol could before rupture, be strained to about 9 % and 12 %, respectively. The toughness of the plasticized films increased by ca. 300 % compared to the pristine CNF film. Furthermore, the water vapor barrier properties of the biohybrid films were also preserved by the addition of sorbitol. CNF films plasticized with sorbitol was demonstrated to simultaneously enhance fracture toughness, work of fracture, softening behavior while preserving gas barrier properties. Highly favorable thermomechanical characteristics were found with CNF/sorbitol combinations and motivate further work on this material system, for instance as a thermoformable matrix in biocomposite materials. The unique combination of excellent oxygen barrier behavior, formability and optical transparency suggest the potential of these CNF-based films as an alternative in flexible packaging of oxygen sensitive devices like thin-film transistors or organic light-emitting diode displays, gas storage applications and as barrier coatings/laminations in packaging applications, including free-standing films as aluminium-replacement in liquid board and primary packaging, as replacement for polyethylene (PE) in wrapping paper, e. g. sweats and confectionary.
- 22 October 2021
- Published by Walter de Gruyter GmbH in Nordic Pulp & Paper Research Journal
- Vol. 37 (1) , 138-148
Enhanced mechanical and gas barrier performance of plasticized cellulose nanofibril films
Cellulose nanofibrils (CNF) are mixed with plasticizers; sorbitol and glycerol, through high-pressure homogenization to prepare multifunctional biohybrid films. The resulting plasticized films obtained after solvent evaporation are strong, flexible and demonstrate superior toughness and optical transparency. The oxygen barrier properties of the biohybrid films outperform commercial packaging materials. The sorbitol-plasticized CNF films possess excellent oxygen barrier properties, 0.34 cm3·μm/m2·day·kPa at 50 % relative humidity, while significantly enhancing the toughness and fracture strength of the films. CNF films plasticized by 20 wt.% of sorbitol and glycerol could before rupture, be strained to about 9 % and 12 %, respectively. The toughness of the plasticized films increased by ca. 300 % compared to the pristine CNF film. Furthermore, the water vapor barrier properties of the biohybrid films were also preserved by the addition of sorbitol. CNF films plasticized with sorbitol was demonstrated to simultaneously enhance fracture toughness, work of fracture, softening behavior while preserving gas barrier properties. Highly favorable thermomechanical characteristics were found with CNF/sorbitol combinations and motivate further work on this material system, for instance as a thermoformable matrix in biocomposite materials. The unique combination of excellent oxygen barrier behavior, formability and optical transparency suggest the potential of these CNF-based films as an alternative in flexible packaging of oxygen sensitive devices like thin-film transistors or organic light-emitting diode displays, gas storage applications and as barrier coatings/laminations in packaging applications, including free-standing films as aluminium-replacement in liquid board and primary packaging, as replacement for polyethylene (PE) in wrapping paper, e. g. sweats and confectionary.