Patibandla Anilkumar
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Previous Organizations / Institutes
The organizations / institutes from the scholar's other articles in the past ten years
Research Subjects
Research Interests
Patibandla Anilkumar has a total of 20 co-authors. Here are the top co-authors by number of shared publications:
- Pamu Dobbidi
Department of Physics, Indian Institute of Technology, Guwahati, Assam, 781039, India
7 shared publications - Tapeshwar Tiwari
Center for High Power Microwave Tube and Component Technology, SAMEER Center Guwahati, Guwahati, Assam, India
7 shared publications - Shaomeng Wang
University of Electronic Science and Technology of China
4 shared publications - Yubin Gong
University of Electronic Science and Technology of China
4 shared publications - Ravindra Kollu
Department of Electrical and Electronics Engineering, University College of Engineering Kakinada, Jawaharlal Nehru Technological University Kakinada, India
2 shared publications Tapeshwar Tiwari
Centre for High Power Microwave Tube and Component Technology,SAMEER Guwahati,Guwahati,Assam,India
2 shared publications
Latest Publications
- 1 January 2026
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Plasma Science
- Vol. 54 (8) , 1-9
Design and Simulation of Broadband Suspended Planar Double Meander Slot-Line Slow Wave Structure With E-Plane Feed and Concave Pill-Box Dielectric Window for 1 THz TWT
- 1 January 2026
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Plasma Science
- Vol. 54 (8) , 1-9
Design and Simulation of Broadband Suspended Planar Double Meander Slot-Line Slow Wave Structure With E-Plane Feed and Concave Pill-Box Dielectric Window for 1 THz TWT
- 12 December 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Electron Devices
- Vol. 73 (1) , 646-651
An Efficient Blended Staggered Double Vane Slow Wave Structure for 1 THz TWT
This article presents a novel blended staggered double vane slow wave structure (BSDV-SWS) for a 0.98–1.1THz frequency traveling-wave tube (TWT). The proposed structure is designed to overcome key limitations at terahertz frequencies by enhancing electric field distribution for improved interaction efficiency, simplifying fabrication through the elimination of sharp edges that cause field singularities, and reducing RF losses. Dispersion and transmission analyses confirm minimal reflection and strong energy transfer. Beam–wave interaction provides 1.155 W output power, 25.85dB gain, and 0.25% electronic efficiency when 25.7kV beam voltage and 18.2mA beam current is applied using CST Studio Suite. The close alignment between the measured S-parameters of the nano-computer numerical control (CNC)-fabricated device and the simulated performance confirms the practical feasibility of the proposed design.
- 12 December 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Electron Devices
- Vol. 73 (1) , 646-651
An Efficient Blended Staggered Double Vane Slow Wave Structure for 1 THz TWT
This article presents a novel blended staggered double vane slow wave structure (BSDV-SWS) for a 0.98–1.1THz frequency traveling-wave tube (TWT). The proposed structure is designed to overcome key limitations at terahertz frequencies by enhancing electric field distribution for improved interaction efficiency, simplifying fabrication through the elimination of sharp edges that cause field singularities, and reducing RF losses. Dispersion and transmission analyses confirm minimal reflection and strong energy transfer. Beam–wave interaction provides 1.155 W output power, 25.85dB gain, and 0.25% electronic efficiency when 25.7kV beam voltage and 18.2mA beam current is applied using CST Studio Suite. The close alignment between the measured S-parameters of the nano-computer numerical control (CNC)-fabricated device and the simulated performance confirms the practical feasibility of the proposed design.
- Open Access
- 6 November 2025
- Published by IOP Publishing in Engineering Research Express
- Vol. 7 (4) , 045350
Design and identification of an optimal approach for modelling a hybrid renewable energy system
Most power generation relies on fossil fuels, which are both finite resources and major contributors to greenhouse gas emissions. In recent years, renewable energy sources such as solar, wind, and biomass have played an important role in power generation to mitigate these concerns. However, the successful modelling, operation, and integration of these sources into the grid system poses significant challenges due to their inherent variability and dependency on environmental conditions. Due to these challenges, determining the optimal capacity of renewables in a hybrid system is complex. Thus, a robust methodology is required to address this design challenge effectively. To achieve this, development of advanced modelling techniques is suggested that consider the probabilistic nature of renewable energy sources and load patterns. This study analyses different approaches, including the deterministic and probabilistic methods, and proposes an optimal approach and design for a hybrid renewable energy system, which is more reliable with a reduced loss of power supply probability and produces energy with 26.3% lower levelised cost of electricity (LCOE) than fossil fuel–based alternatives such as the utility grid. A detailed analysis of the compatibility of the proposed method with the actual real-time data is carried out, and the effect of the grid purchase and sale capacities on the LCOE of the produced energy is examined.
- 6 November 2025
- Published by IOP Publishing in Engineering Research Express
- Vol. 7 (4) , 045350
Open AccessDesign and identification of an optimal approach for modelling a hybrid renewable energy system
Most power generation relies on fossil fuels, which are both finite resources and major contributors to greenhouse gas emissions. In recent years, renewable energy sources such as solar, wind, and biomass have played an important role in power generation to mitigate these concerns. However, the successful modelling, operation, and integration of these sources into the grid system poses significant challenges due to their inherent variability and dependency on environmental conditions. Due to these challenges, determining the optimal capacity of renewables in a hybrid system is complex. Thus, a robust methodology is required to address this design challenge effectively. To achieve this, development of advanced modelling techniques is suggested that consider the probabilistic nature of renewable energy sources and load patterns. This study analyses different approaches, including the deterministic and probabilistic methods, and proposes an optimal approach and design for a hybrid renewable energy system, which is more reliable with a reduced loss of power supply probability and produces energy with 26.3% lower levelised cost of electricity (LCOE) than fossil fuel–based alternatives such as the utility grid. A detailed analysis of the compatibility of the proposed method with the actual real-time data is carried out, and the effect of the grid purchase and sale capacities on the LCOE of the produced energy is examined.
- 23 October 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Plasma Science
- Vol. 53 (11) , 3608-3616
Design and Analysis of Modified Blended Staggered Double Vane Slow Wave Structure for 1 THz Traveling Wave Tube
The growing demand for terahertz (THz) traveling wave tubes (TWTs) in advanced applications has driven the design and simulation of a modified blended staggered double-vane slow wave structure (MBSDV-SWS) operating at 1.002 THz. The optimized design achieves an improved beam-RF coupling with 0.32–0.24 normalized phase velocity and $1.53~\Omega $ interaction impedance, while demonstrating the notable 30 GHz bandwidth with reflection coefficient (S11) under −10 dB at 1–1.03 THz despite conductive losses when transmission coefficient S21 is −50 dB. Under 23.7 kV beam voltage, 20.8 mA current, and 3mW input power, the device delivers 2.94 W output power with 29.91 dB gain and 0.6% electronic efficiency. Thermal simulations confirm water cooling (2000 W/m ${}^{2}\cdot \text {K}$ ) maintains safe operation below 420 K, establishing this MBSDV-SWS as a promising solution for high-performance THz vacuum electronics.
- 23 October 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Plasma Science
- Vol. 53 (11) , 3608-3616
Design and Analysis of Modified Blended Staggered Double Vane Slow Wave Structure for 1 THz Traveling Wave Tube
The growing demand for terahertz (THz) traveling wave tubes (TWTs) in advanced applications has driven the design and simulation of a modified blended staggered double-vane slow wave structure (MBSDV-SWS) operating at 1.002 THz. The optimized design achieves an improved beam-RF coupling with 0.32–0.24 normalized phase velocity and $1.53~\Omega $ interaction impedance, while demonstrating the notable 30 GHz bandwidth with reflection coefficient (S11) under −10 dB at 1–1.03 THz despite conductive losses when transmission coefficient S21 is −50 dB. Under 23.7 kV beam voltage, 20.8 mA current, and 3mW input power, the device delivers 2.94 W output power with 29.91 dB gain and 0.6% electronic efficiency. Thermal simulations confirm water cooling (2000 W/m ${}^{2}\cdot \text {K}$ ) maintains safe operation below 420 K, establishing this MBSDV-SWS as a promising solution for high-performance THz vacuum electronics.
- Open Access
- 29 June 2025
- Published by MDPI AG in Electronics
- Vol. 14 (13) , 2624
Challenges in the Design and Development of Slow-Wave Structure for THz Traveling-Wave Tube: A Tutorial Review
As solid-state devices continue to advance, vacuum electron devices maintain critical importance due to their superior high-frequency power handling, long-term reliability, and operational efficiency. Among these, traveling-wave tubes (TWTs) excel in high-power microwave (HPM) applications, offering exceptional bandwidth and gain. However, developing THz-range TWT slow-wave structures (SWSs) presents significant design challenges. This work systematically outlines the SWS design methodology while addressing key obstacles and their solutions. As a demonstration, a staggered double vane (SDV) SWS operating at 1 THz (980–1080 GHz) achieves 650 mW output power, 23.35 dB gain, 0.14% electronic efficiency, and compact 21 mm length. Comparative analysis with deformed quasi-sine waveguide (D-QSWG) SWS confirms the SDV design’s superior performance for THz applications.
- 29 June 2025
- Published by MDPI AG in Electronics
- Vol. 14 (13) , 2624
Open AccessChallenges in the Design and Development of Slow-Wave Structure for THz Traveling-Wave Tube: A Tutorial Review
As solid-state devices continue to advance, vacuum electron devices maintain critical importance due to their superior high-frequency power handling, long-term reliability, and operational efficiency. Among these, traveling-wave tubes (TWTs) excel in high-power microwave (HPM) applications, offering exceptional bandwidth and gain. However, developing THz-range TWT slow-wave structures (SWSs) presents significant design challenges. This work systematically outlines the SWS design methodology while addressing key obstacles and their solutions. As a demonstration, a staggered double vane (SDV) SWS operating at 1 THz (980–1080 GHz) achieves 650 mW output power, 23.35 dB gain, 0.14% electronic efficiency, and compact 21 mm length. Comparative analysis with deformed quasi-sine waveguide (D-QSWG) SWS confirms the SDV design’s superior performance for THz applications.
- 27 February 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Plasma Science
- Vol. 53 (4) , 622-626
Optimization and Algorithm Quality Measure in the Design of Pill-Box Dielectric Window
The pill-box dielectric window is a key component in vacuum electron devices. Using the backtracking search algorithm (BSA) for its optimal design helps identify the precise design variables needed to achieve a desired frequency of 2.998 GHz and maximize bandwidth. The optimal design variables are a cavity length ($C_{l}$) of 27 mm and a cavity radius ($C_{r}$) of 33.3 mm. The pareto multi-objective backtracking search algorithm (PMBSA) algorithm’s performance was validated against well-known algorithms harmony search algorithm (HSA), multi-objective particle swarm optimization (MOPSO), and nondominated sorting genetic algorithm (NSGA-II). The quality of these algorithms was assessed using C-metric and spacing (SP) metric analyses, with the results presented in a box plot. Both the analyses suggest that PMBSA offers favorable results.
- 27 February 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Plasma Science
- Vol. 53 (4) , 622-626
Optimization and Algorithm Quality Measure in the Design of Pill-Box Dielectric Window
The pill-box dielectric window is a key component in vacuum electron devices. Using the backtracking search algorithm (BSA) for its optimal design helps identify the precise design variables needed to achieve a desired frequency of 2.998 GHz and maximize bandwidth. The optimal design variables are a cavity length ($C_{l}$) of 27 mm and a cavity radius ($C_{r}$) of 33.3 mm. The pareto multi-objective backtracking search algorithm (PMBSA) algorithm’s performance was validated against well-known algorithms harmony search algorithm (HSA), multi-objective particle swarm optimization (MOPSO), and nondominated sorting genetic algorithm (NSGA-II). The quality of these algorithms was assessed using C-metric and spacing (SP) metric analyses, with the results presented in a box plot. Both the analyses suggest that PMBSA offers favorable results.
- 29 October 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Plasma Science
- Vol. 52 (9) , 4739-4747
Optimization of Hole and Slot, Slot, Vane, and Rising Sun Anode Structures of the Magnetron
The magnetron, a high-power microwave active device within the realm of vacuum tubes, involves the modeling of anode structures such as hole and slot, slot, vane, and rising sun configurations through mathematical expressions. Eigenmode and strap analyses are conducted to determine the most suitable strapping method for each anode block. The equivalent circuit approach is compared with the simulation design and results with a negligible relative difference. Designing the magnetron with empirical equations alone proves impractical, necessitating an optimization approach. The backtracking search algorithm (BSA) emerges as a popular optimization tool capable of efficiently determining precise design parameters within minutes. BSA’s effectiveness is corroborated through validation against the particle swarm optimization (PSO) algorithm, demonstrating closely aligned results. Additionally, a parametric analysis is executed on all design parameters to elucidate their impact on inductance, capacitance, and operating frequency. The simplicity and accuracy of these optimization tools empower designers to craft vacuum devices with greater ease and precision.
- 29 October 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Plasma Science
- Vol. 52 (9) , 4739-4747
Optimization of Hole and Slot, Slot, Vane, and Rising Sun Anode Structures of the Magnetron
The magnetron, a high-power microwave active device within the realm of vacuum tubes, involves the modeling of anode structures such as hole and slot, slot, vane, and rising sun configurations through mathematical expressions. Eigenmode and strap analyses are conducted to determine the most suitable strapping method for each anode block. The equivalent circuit approach is compared with the simulation design and results with a negligible relative difference. Designing the magnetron with empirical equations alone proves impractical, necessitating an optimization approach. The backtracking search algorithm (BSA) emerges as a popular optimization tool capable of efficiently determining precise design parameters within minutes. BSA’s effectiveness is corroborated through validation against the particle swarm optimization (PSO) algorithm, demonstrating closely aligned results. Additionally, a parametric analysis is executed on all design parameters to elucidate their impact on inductance, capacitance, and operating frequency. The simplicity and accuracy of these optimization tools empower designers to craft vacuum devices with greater ease and precision.
- 14 August 2023
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Journal on Multiscale and Multiphysics Computational Techniques
- Vol. 8, 314-321
Optimization Using Backtracking Search Algorithm for the Design of Magnetron Anode Block and Pill-Box RF Window
Determining the design variables of the magnetron sub-assemblies using empirical equations is a challenge. In this study, with the help of the popular backtracking search algorithm (BSA), the bare anode block of the magnetron and pill-box RF window are designed at frequency of 2.998 GHz. The convergence results with BSA are validated with the harmony search algorithm (HSA) and particle swarm optimization (PSO). The optimized design variables of bare anode are hole radius ( $a$ ), slot length ( $l_{s}$ ), slot width ( $W_{s}$ ), and anode height ( $h_{a}$ ) which are found to be 3.1, 2.9, 12.8, and 100 mm, respectively, and converge within 150 iterations with BSA. The optimized results are compared to simulated results which are nearly identical with a negligible relative difference of $\pi$ -mode is 1.08%. From the pill-box RF window design, multi-objective optimization is carried out to reach the desired frequency and to achieve minimized reflections by maximizing the bandwidth. The corresponding design variables dielectric thickness ( $t_{w}$ ), cavity length ( $C_{l}$ ), and cavity radius ( $C_{r}$ ) which are 2.5, 30.4, and 41.5 mm, respectively. Pareto multi-objective BSA (PMBSA) is validated with the weighted sum approach (WSA). Due to its simplicity and lower latency, optimization approach is helpful to designers to develop the microwave devices.
- 14 August 2023
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Journal on Multiscale and Multiphysics Computational Techniques
- Vol. 8, 314-321
Optimization Using Backtracking Search Algorithm for the Design of Magnetron Anode Block and Pill-Box RF Window
Determining the design variables of the magnetron sub-assemblies using empirical equations is a challenge. In this study, with the help of the popular backtracking search algorithm (BSA), the bare anode block of the magnetron and pill-box RF window are designed at frequency of 2.998 GHz. The convergence results with BSA are validated with the harmony search algorithm (HSA) and particle swarm optimization (PSO). The optimized design variables of bare anode are hole radius ( $a$ ), slot length ( $l_{s}$ ), slot width ( $W_{s}$ ), and anode height ( $h_{a}$ ) which are found to be 3.1, 2.9, 12.8, and 100 mm, respectively, and converge within 150 iterations with BSA. The optimized results are compared to simulated results which are nearly identical with a negligible relative difference of $\pi$ -mode is 1.08%. From the pill-box RF window design, multi-objective optimization is carried out to reach the desired frequency and to achieve minimized reflections by maximizing the bandwidth. The corresponding design variables dielectric thickness ( $t_{w}$ ), cavity length ( $C_{l}$ ), and cavity radius ( $C_{r}$ ) which are 2.5, 30.4, and 41.5 mm, respectively. Pareto multi-objective BSA (PMBSA) is validated with the weighted sum approach (WSA). Due to its simplicity and lower latency, optimization approach is helpful to designers to develop the microwave devices.
- 25 April 2023
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 1-2
Eigen analysis and optimization of rising sun anode of magnetron using Backtracking search algorithm
Magnetron device designers are facing the challenge of finding the exact design parameters of the resonating structure with empirical equations alone. In the present study, an optimization MATLAB code of the Backtracking search algorithm (BSA) is used to find the exact design parameters of the rising sun bare anode block of a magnetron operating at a frequency of 2.998 GHz. Eigen-mode simulation of CST Studio Suite is used to find the suitable type of strapping case to solve the mode competition issue. BSA is validated with a Particle swarm optimization (PSO) algorithm. The obtained design parameters with BSA are slot width $(W_{rs})$ , longer slot length $(r_{1})$ , and shorter slot length $(r_{2})$ which are 2 mm, 37.4 mm, and 34.4 mm.- 25 April 2023
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 1-2
Eigen analysis and optimization of rising sun anode of magnetron using Backtracking search algorithm
Magnetron device designers are facing the challenge of finding the exact design parameters of the resonating structure with empirical equations alone. In the present study, an optimization MATLAB code of the Backtracking search algorithm (BSA) is used to find the exact design parameters of the rising sun bare anode block of a magnetron operating at a frequency of 2.998 GHz. Eigen-mode simulation of CST Studio Suite is used to find the suitable type of strapping case to solve the mode competition issue. BSA is validated with a Particle swarm optimization (PSO) algorithm. The obtained design parameters with BSA are slot width $(W_{rs})$ , longer slot length $(r_{1})$ , and shorter slot length $(r_{2})$ which are 2 mm, 37.4 mm, and 34.4 mm.- 12 April 2023
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Plasma Science
- Vol. 51 (5) , 1223-1231
Design and Thermal Study of 5 MW S-Band Tunable Pulsed Magnetron for Linear Accelerator System
This study presents a step-by-step design of 16 vanes hole and slot type high-power $S$ -band pulse magnetron of 5 MW peak power at an operating frequency of 2.998 $\pm$ 0.005 GHz. The eigen-mode solver finds the $\pi$ -mode and neighboring mode frequencies for unstrapping, single-ring, and double-ring strapping cases. The nature of the coupling and the circuit efficiency of the magnetron is estimated using the frequency domain solver quality factor analysis. The designed mechanical capacitive-type frequency tuner is used to tune the frequencies up to 21.7 MHz. According to the Hull-Hartree diagram, the applied electric and magnetic fields are found to be 57 kV and 1960 Gauss, respectively. The particle-in-cell (PIC) simulation confirms the output performance parameters like output power, anode current, and efficiency, which are found to be 5.136 MW, 140 A, and 64.36%, respectively. The thermal study is carried out under the ANSYS workbench to find the temperature-withstanding capability of the complete magnetron. The helix-shaped heater is designed to heat the cathode surface indirectly. The calculated and simulated temperatures of the heater are found in good agreement. The maximum temperatures on helix, cathode, and anode are 2235 $^\circ$ C, 776 $^\circ$ C, and 309 $^\circ$ C, respectively, which are in a safe operating range.
- 12 April 2023
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Plasma Science
- Vol. 51 (5) , 1223-1231
Design and Thermal Study of 5 MW S-Band Tunable Pulsed Magnetron for Linear Accelerator System
This study presents a step-by-step design of 16 vanes hole and slot type high-power $S$ -band pulse magnetron of 5 MW peak power at an operating frequency of 2.998 $\pm$ 0.005 GHz. The eigen-mode solver finds the $\pi$ -mode and neighboring mode frequencies for unstrapping, single-ring, and double-ring strapping cases. The nature of the coupling and the circuit efficiency of the magnetron is estimated using the frequency domain solver quality factor analysis. The designed mechanical capacitive-type frequency tuner is used to tune the frequencies up to 21.7 MHz. According to the Hull-Hartree diagram, the applied electric and magnetic fields are found to be 57 kV and 1960 Gauss, respectively. The particle-in-cell (PIC) simulation confirms the output performance parameters like output power, anode current, and efficiency, which are found to be 5.136 MW, 140 A, and 64.36%, respectively. The thermal study is carried out under the ANSYS workbench to find the temperature-withstanding capability of the complete magnetron. The helix-shaped heater is designed to heat the cathode surface indirectly. The calculated and simulated temperatures of the heater are found in good agreement. The maximum temperatures on helix, cathode, and anode are 2235 $^\circ$ C, 776 $^\circ$ C, and 309 $^\circ$ C, respectively, which are in a safe operating range.