Lamia Triqui-Sari
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Lamia Triqui-Sari has a total of 14 co-authors. Here are the top co-authors by number of shared publications:
- Mohammed Bennekrouf
Manufacturing Engineering Laboratory of Tlemcen, University of Tlemcen, Tlemcen, Algeria
3 shared publications - Abdennour Ilyas Benfriha
University of Batna2,Laboratory of Automation and Manufacturing Engineering,Department of industrial Engineering,Batna,Algeria
1 shared publication - Abderrahmane Bensmaine
INRIA Nancy Grand-Est, ISGMP Bat. A, Ile du Saulcy, 57000 Metz, France
1 shared publication Aimed Eddine Bougloula
University of Batna2,Laboratory of Automation and Manufacturing Engineering,Department of industrial Engineering,Batna,Algeria
1 shared publicationHichem Fellahi
ENPO-MA, Industrial engineering Department, Oran, Algérie
1 shared publicationKarima Sihem Siyoucef
ENPO-MA, Industrial engineering Department, Oran, Algérie
1 shared publication
Latest Publications
- Open Access
- 2 July 2025
- Published by IEOM Society International
Toward a Secure and Scalable Vaccine Supply Chain: A Systematic Literature Review of Blockchain, IoT, and Cryptographic Frameworks
This systematic literature review (SLR) investigates blockchain-enabled vaccine supply chains that leverage real-time Internet of Things (IoT) monitoring, advanced scalability techniques such as sharding and edge computing, and robust privacy-preserving mechanisms. Following a rigorous methodology, we systematically analyzed and classified 40 peer-reviewed studies published from extensive academic databases, focusing on blockchain architecture types, IoT integration methodologies, privacy and security measures, as well as regulatory compliance strategies. Ethereum-based platforms were predominant (15 out of 40 studies) due to their transparency and decentralized governance, whereas permissioned platforms like Hyperledger Fabric (5 studies) offered enhanced access control and compliance capabilities. IoT sensor technologies, often combined with Radio Frequency Identification (RFID), were extensively integrated (in 37 studies) to ensure real-time validation of critical cold-chain conditions. Privacy-preserving approaches identified include encryption, zero-knowledge protocols, and careful on-chain/off-chain data partitioning. Despite these advances, the review highlights a significant lack of standardized performance metrics, underscoring an important gap for future research. This paper synthesizes current trends, identifies technological strengths and limitations, and provides recommendations to guide future blockchain-based vaccine supply chain architectures toward improved scalability,security, and regulatory adherence.
- 2 July 2025
- Published by IEOM Society International
Open AccessToward a Secure and Scalable Vaccine Supply Chain: A Systematic Literature Review of Blockchain, IoT, and Cryptographic Frameworks
This systematic literature review (SLR) investigates blockchain-enabled vaccine supply chains that leverage real-time Internet of Things (IoT) monitoring, advanced scalability techniques such as sharding and edge computing, and robust privacy-preserving mechanisms. Following a rigorous methodology, we systematically analyzed and classified 40 peer-reviewed studies published from extensive academic databases, focusing on blockchain architecture types, IoT integration methodologies, privacy and security measures, as well as regulatory compliance strategies. Ethereum-based platforms were predominant (15 out of 40 studies) due to their transparency and decentralized governance, whereas permissioned platforms like Hyperledger Fabric (5 studies) offered enhanced access control and compliance capabilities. IoT sensor technologies, often combined with Radio Frequency Identification (RFID), were extensively integrated (in 37 studies) to ensure real-time validation of critical cold-chain conditions. Privacy-preserving approaches identified include encryption, zero-knowledge protocols, and careful on-chain/off-chain data partitioning. Despite these advances, the review highlights a significant lack of standardized performance metrics, underscoring an important gap for future research. This paper synthesizes current trends, identifies technological strengths and limitations, and provides recommendations to guide future blockchain-based vaccine supply chain architectures toward improved scalability,security, and regulatory adherence.
- 30 October 2024
- Published by Springer Nature
- p. 225-243
The Blood Product Supply Chain and Transfusion Network
- 30 October 2024
- Published by Springer Nature
- p. 225-243
The Blood Product Supply Chain and Transfusion Network
- 30 October 2024
- Published by Springer Nature
- p. 23-45
Care Unit Implementation Strategies to Optimise the Design for Healthcare Facilities
- 30 October 2024
- Published by Springer Nature
- p. 23-45
Care Unit Implementation Strategies to Optimise the Design for Healthcare Facilities
- 16 October 2024
- Published by Taylor & Francis in Engineering Management Journal
- Vol. 37 (3) , 267-288
Exploring the Power of Artificial Intelligence in Supply Chain Management: A Literature Review on the Artificial Intelligence Applications and Tools Used in Supply Chains and Their Distribution According to the SCOR Method
- 16 October 2024
- Published by Taylor & Francis in Engineering Management Journal
- Vol. 37 (3) , 267-288
Exploring the Power of Artificial Intelligence in Supply Chain Management: A Literature Review on the Artificial Intelligence Applications and Tools Used in Supply Chains and Their Distribution According to the SCOR Method
- 31 August 2024
- Published by Springer Nature in OPSEARCH
- p. 1-35
Operational planning of the production and the processing of chickens in multi-products slaughter unit
- 31 August 2024
- Published by Springer Nature in OPSEARCH
- p. 1-35
Operational planning of the production and the processing of chickens in multi-products slaughter unit
- 3 March 2022
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 1-5
Products exchange in a multi-level multi-period distribution network with limited storage capacity
Cooperation in distribution network has attracted the interest of researchers. In this study we analyse an inventory problem in distribution network, where we propose a cooperative platform that allow the members of the network to share and use local inventory of other members to meet their local demand. We develop a MIP models representing the traditional network and the network with the cooperative platform. Then we solve it using LINGO solver. We found that the proposed approach has reduced the total cost of the network and reduce the overstock and stock-out situation, which lead to improve the quality of service.
- 3 March 2022
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 1-5
Products exchange in a multi-level multi-period distribution network with limited storage capacity
Cooperation in distribution network has attracted the interest of researchers. In this study we analyse an inventory problem in distribution network, where we propose a cooperative platform that allow the members of the network to share and use local inventory of other members to meet their local demand. We develop a MIP models representing the traditional network and the network with the cooperative platform. Then we solve it using LINGO solver. We found that the proposed approach has reduced the total cost of the network and reduce the overstock and stock-out situation, which lead to improve the quality of service.
- Open Access
- 17 January 2022
- Published by EDP Sciences
- Vol. 336, 00025
A bi-objective optimization approach based on Lp-metric method in broiler production network: a case study
In this work, we analyse the chicken production in a poultry network composed of a set of farms that serves a slaughterhouse in the city of Tlemcen. Each farm has a chicken house dedicated to breeding, and each chicken house has three breeding modes: manual breeding, semi-automatic breeding, and automatic breeding. And each mode consumes an appropriate energy level depending on the degree of automation used, which directly affects the quality of the chicken. The objective of this study is to determine the best energy adaptation within the farm to obtain good quality chickens. The problem of this activity is the choice of the right energy level of breeding, which consumes a minimum energy value, and gives a good quality of chickens. Knowing that the quality improves with the increase of energy, this study serves to develop mathematical modelling of two objectives: minimization of energy consumption and maximization of the chicken quality produced. The two objectives are optimized independently, and then they are joined by adapting the LP-metric method to help the breeders choose the optimal energy level to obtain good quality chickens.
- 17 January 2022
- Published by EDP Sciences
- Vol. 336, 00025
Open AccessA bi-objective optimization approach based on Lp-metric method in broiler production network: a case study
In this work, we analyse the chicken production in a poultry network composed of a set of farms that serves a slaughterhouse in the city of Tlemcen. Each farm has a chicken house dedicated to breeding, and each chicken house has three breeding modes: manual breeding, semi-automatic breeding, and automatic breeding. And each mode consumes an appropriate energy level depending on the degree of automation used, which directly affects the quality of the chicken. The objective of this study is to determine the best energy adaptation within the farm to obtain good quality chickens. The problem of this activity is the choice of the right energy level of breeding, which consumes a minimum energy value, and gives a good quality of chickens. Knowing that the quality improves with the increase of energy, this study serves to develop mathematical modelling of two objectives: minimization of energy consumption and maximization of the chicken quality produced. The two objectives are optimized independently, and then they are joined by adapting the LP-metric method to help the breeders choose the optimal energy level to obtain good quality chickens.
- Open Access
- 17 January 2022
- Published by EDP Sciences in E3S Web of Conferences
- Vol. 336, 00060
Optimization of transport costs and CO2 emissions reduction policies in a continuous cycle supply chain: case study
In this paper we analyze a distribution network and a waste collection network that adopt the same fleet of vehicles. This fleet is owned by a company that provides logistics and transport services in the Algerian territory. The objective of this work is to propose a logistics chain in circular economy (continuous cycle) by combining the transports of the two studied networks, taking advantage of the empty returns, in order to minimize the travel costs and to reduce the CO2 emissions. The purpose of this study is to investigate the impact of optimal vehicle usage in distribution networks and its influence on total supply chain costs and environmental effects.
- 17 January 2022
- Published by EDP Sciences in E3S Web of Conferences
- Vol. 336, 00060
Open AccessOptimization of transport costs and CO2 emissions reduction policies in a continuous cycle supply chain: case study
In this paper we analyze a distribution network and a waste collection network that adopt the same fleet of vehicles. This fleet is owned by a company that provides logistics and transport services in the Algerian territory. The objective of this work is to propose a logistics chain in circular economy (continuous cycle) by combining the transports of the two studied networks, taking advantage of the empty returns, in order to minimize the travel costs and to reduce the CO2 emissions. The purpose of this study is to investigate the impact of optimal vehicle usage in distribution networks and its influence on total supply chain costs and environmental effects.
- Open Access
- 17 January 2022
- Published by EDP Sciences
- Vol. 336, 00028
The combination of a NEH heuristic and an LP metric to solve a flow-shop scheduling problem taking into account energy consumption and production costs: a case study
In this work, we study a multi-objective problem in a pharmaceutical production unit composed of several production stations that produce several kinds of products. The goal of this work, in a first step, is to propose a scheduling at the production unit in order to establish a synchronization of the different tasks on the m-machines. The problem can be formulated by the scheduling of a multi-product flow-shop.Then, we take into account the energy constraints of each task to be done. The problem can be formulated by a linear multi-objective MILP program, where the first objective is to determine the best sequence that minimizes the production and launch costs. In addition, the second objective is to find the best sequence that minimizes energy consumption. The problem is formulated and solved by combining the NEH heuristic and the LP-metric method to determine an intermediate solution between minimizing production costs and minimizing energy consumption.
- 17 January 2022
- Published by EDP Sciences
- Vol. 336, 00028
Open AccessThe combination of a NEH heuristic and an LP metric to solve a flow-shop scheduling problem taking into account energy consumption and production costs: a case study
In this work, we study a multi-objective problem in a pharmaceutical production unit composed of several production stations that produce several kinds of products. The goal of this work, in a first step, is to propose a scheduling at the production unit in order to establish a synchronization of the different tasks on the m-machines. The problem can be formulated by the scheduling of a multi-product flow-shop.Then, we take into account the energy constraints of each task to be done. The problem can be formulated by a linear multi-objective MILP program, where the first objective is to determine the best sequence that minimizes the production and launch costs. In addition, the second objective is to find the best sequence that minimizes energy consumption. The problem is formulated and solved by combining the NEH heuristic and the LP-metric method to determine an intermediate solution between minimizing production costs and minimizing energy consumption.
- 1 June 2019
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 1-6
Routing Planning of the Different Harvester for Organizing the Harvesting of Sugar Beet
This article proposes a planning of the routing path of the different beet lifters for the organization of the beet sugar harvest. The start of the production for sugar extraction is related to replenishment of the sugar beet, its synchronization with the date of operation of a set of harvesters is very critical. However, sugar beet is a biennial plant. Which gives more constraint for sugar production, which requires a thorough and precise study on the transport and storage of beet sugar in this study, our approach consists in proposing a harvesting circuit between the different places of cultivation of the sugar beet in the western region of Algeria. Our objective is to determine the necessary number of harvesters, in order to reduce the Investment cost relative to harvesters. In a second part, we compare two scenarios for replenishment of sugar beet. In the first scenario, the transfer of sugar beet is send directly to the production unit. In the second scenario, sugar beet is stored in zone storage cooperatives. Certainly this planning can help policy makers and farmers to work together to optimize transport, cost and time for the harvesting and processing areas
- 1 June 2019
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 1-6
Routing Planning of the Different Harvester for Organizing the Harvesting of Sugar Beet
This article proposes a planning of the routing path of the different beet lifters for the organization of the beet sugar harvest. The start of the production for sugar extraction is related to replenishment of the sugar beet, its synchronization with the date of operation of a set of harvesters is very critical. However, sugar beet is a biennial plant. Which gives more constraint for sugar production, which requires a thorough and precise study on the transport and storage of beet sugar in this study, our approach consists in proposing a harvesting circuit between the different places of cultivation of the sugar beet in the western region of Algeria. Our objective is to determine the necessary number of harvesters, in order to reduce the Investment cost relative to harvesters. In a second part, we compare two scenarios for replenishment of sugar beet. In the first scenario, the transfer of sugar beet is send directly to the production unit. In the second scenario, sugar beet is stored in zone storage cooperatives. Certainly this planning can help policy makers and farmers to work together to optimize transport, cost and time for the harvesting and processing areas