Antonio A. Traversa
Research Subjects
Antonio A. Traversa has a total of 15 co-authors. Here are the top co-authors by number of shared publications:
- Alessandro Fonte
R&D Department, SIAE MICROELETTRONICA, Cologno Monzese (MI), Italy
2 shared publications - Luigi Boccia
Dipartimento di Ingegneria Informatica, Modellistica, Elettronica e Sistemistica, University of Calabria, Rende, Italy
2 shared publications - Alessandro Trifiletti
Department of Information, Electronics and Telecommunications Engineering, Sapienza University, 00184 Roma, Italy
1 shared publication Andrea Pallotta
MDG-RFC Department, STMicroelectronics, Cornaredo, Italy
1 shared publicationCarmine Mustacchio
Dipartimento di Ingegneria Informatica, Modellistica, Elettronica e Sistemistica, University of Calabria, Rende, Italy
1 shared publicationDario Tresoldi
Microwave Components Research and Development Laboratories, SIAE Microelettronica, Milan, Italy
1 shared publication
Latest Publications
- Open Access
- 22 December 2022
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Microwave Theory and Techniques
- Vol. 71 (6) , 2582-2593
Flippable and Hermetic E-Band RWG to GCPW Transition With Substrate Embedded Backshort
In this article, a novel millimeter wave (mm-wave), fully hermetic and flippable transitioning structure between grounded coplanar waveguides (GCPWs) and rectangular waveguides (RWGs) is introduced. This transition, realized through standard printed circuit board (PCB) technology, can be employed to feed a waveguide (WG) compliant device on any face of a board given its flexibility in trace routing and component placement. The proposed structure utilizes a mix of transmission line and substrate integrated waveguide (SIW) interconnected with an in-substrate embedded back-short. The transition, in all its configurations, targets a fractional bandwidth (FBW) wider than 20% to cover the commercial $E$ -band spectrum. Moreover, at center frequency the predicted insertion loss (IL) for both normal and flipped transitions is 0.4 and 0.46 dB, respectively. Parametric and yield analyses, together with postmanufacturing inspections have been performed to assess the robustness of the design and to identify the critical manufacturing inaccuracies. The experimental validations confirm the wideband operation with an IL bounded below 2.3 dB for the worst case of a back-to-back configuration.
- 22 December 2022
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Microwave Theory and Techniques
- Vol. 71 (6) , 2582-2593
Open AccessFlippable and Hermetic E-Band RWG to GCPW Transition With Substrate Embedded Backshort
In this article, a novel millimeter wave (mm-wave), fully hermetic and flippable transitioning structure between grounded coplanar waveguides (GCPWs) and rectangular waveguides (RWGs) is introduced. This transition, realized through standard printed circuit board (PCB) technology, can be employed to feed a waveguide (WG) compliant device on any face of a board given its flexibility in trace routing and component placement. The proposed structure utilizes a mix of transmission line and substrate integrated waveguide (SIW) interconnected with an in-substrate embedded back-short. The transition, in all its configurations, targets a fractional bandwidth (FBW) wider than 20% to cover the commercial $E$ -band spectrum. Moreover, at center frequency the predicted insertion loss (IL) for both normal and flipped transitions is 0.4 and 0.46 dB, respectively. Parametric and yield analyses, together with postmanufacturing inspections have been performed to assess the robustness of the design and to identify the critical manufacturing inaccuracies. The experimental validations confirm the wideband operation with an IL bounded below 2.3 dB for the worst case of a back-to-back configuration.
- 13 July 2021
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Circuits and Systems II: Express Briefs
- Vol. 68 (9) , 3098-3102
Compact E-Band I/Q Receiver in SiGe BiCMOS for 5G Backhauling Applications
The implementation of backhauling links poses several challenges to the designers which are requested to limit the hardware costs in the framework of complex millimeter wave radio systems. This work presents a monolithically integrated E-band I/Q receiver covering the whole bandwidth from 71 to 86 GHz. The chip was implemented in a 55 nm SiGe BiCMOS technology which allows reaching a high level of integration. The receiver is based on a Low Noise Amplifier (LNA) stage and a Variable-Gain Amplifier (VGA) which provide a -11 dBm IP1dB. A double balanced mixer provides I/Q baseband outputs through a reduced-size differential phase shifter which allows to contain the chip size to 1.8 mm 2 .
- 13 July 2021
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Circuits and Systems II: Express Briefs
- Vol. 68 (9) , 3098-3102
Compact E-Band I/Q Receiver in SiGe BiCMOS for 5G Backhauling Applications
The implementation of backhauling links poses several challenges to the designers which are requested to limit the hardware costs in the framework of complex millimeter wave radio systems. This work presents a monolithically integrated E-band I/Q receiver covering the whole bandwidth from 71 to 86 GHz. The chip was implemented in a 55 nm SiGe BiCMOS technology which allows reaching a high level of integration. The receiver is based on a Low Noise Amplifier (LNA) stage and a Variable-Gain Amplifier (VGA) which provide a -11 dBm IP1dB. A double balanced mixer provides I/Q baseband outputs through a reduced-size differential phase shifter which allows to contain the chip size to 1.8 mm 2 .