Guoqiang Liu
Guoqiang Liu has a total of 12 co-authors. Here are the top co-authors by number of shared publications:
Yu Yang
National Key Laboratory of Strength and Structural Integrity Aircraft Strength Research Institute of China Dianzi 2 road 710065 Xi'an China
2 shared publicationsAircraft Strength Research Institute (ASRI)
1 shared publicationBinwen Wang
Aircraft Strength Research Institute of China, Xi’an, China
1 shared publication- Chao Zhang
Nanjing University of Aeronautics and Astronautics
1 shared publication Chenfei Yin
National Key Laboratory of Strength and Structural Integrity Aircraft Strength Research Institute of China Dianzi 2 road 710065 Xi'an China
1 shared publicationGang Liu
National Key Laboratory of Strength and Structural Integrity Aircraft Strength Research Institute of China Dianzi 2 road 710065 Xi'an China
1 shared publication
Latest Publications
- Open Access
- 1 May 2025
- Published by NDT.net GmbH & Co. KG
- Vol. 30 (05)
A damage index based on dynamic time warping for guided wave-based damage detection under temperature variation
Temperature variations have significant effects on the guided wave signals and therefore could cause false detection and limit the practical application for the guided wave-based damage detection. Many temperature compensation methods, such as baseline signal stretch methods, machine learning methods and data-driven methods have been developed. These methods either require a lot of data at different temperatures or are effective in some conditions. This could affect their application in practical engineering. In this study, a damage index based on dynamic time warping is presented, which can compensate the phase of current signal to the phase of baseline signal. Experiments were conducted on two stiffened composite panels to validate the effectiveness of the proposed method. The results show that the proposed method can effectively mitigate the temperature effect on the phase of guide wave signals, and can be applied to the actual damage detection under temperature variation.
- 1 May 2025
- Published by NDT.net GmbH & Co. KG
- Vol. 30 (05)
Open AccessA damage index based on dynamic time warping for guided wave-based damage detection under temperature variation
Temperature variations have significant effects on the guided wave signals and therefore could cause false detection and limit the practical application for the guided wave-based damage detection. Many temperature compensation methods, such as baseline signal stretch methods, machine learning methods and data-driven methods have been developed. These methods either require a lot of data at different temperatures or are effective in some conditions. This could affect their application in practical engineering. In this study, a damage index based on dynamic time warping is presented, which can compensate the phase of current signal to the phase of baseline signal. Experiments were conducted on two stiffened composite panels to validate the effectiveness of the proposed method. The results show that the proposed method can effectively mitigate the temperature effect on the phase of guide wave signals, and can be applied to the actual damage detection under temperature variation.
- Open Access
FEM Simulation-Based Adversarial Domain Adaptation for Fatigue Crack Detection Using Lamb Wave
Lamb wave-based damage detection technology shows great potential for structural integrity assessment. However, conventional damage features based damage detection methods and data-driven intelligent damage detection methods highly rely on expert knowledge and sufficient labeled data for training, for which collecting is usually expensive and time-consuming. Therefore, this paper proposes an automated fatigue crack detection method using Lamb wave based on finite element method (FEM) and adversarial domain adaptation. FEM-simulation was used to obtain simulated response signals under various conditions to solve the problem of the insufficient labeled data in practice. Due to the distribution discrepancy between simulated signals and experimental signals, the detection performance of classifier just trained with simulated signals will drop sharply on the experimental signals. Then, Domain-adversarial neural network (DANN) with maximum mean discrepancy (MMD) was used to achieve discriminative and domain-invariant feature extraction between simulation source domain and experiment target domain, and the unlabeled experimental signals samples will be accurately classified. The proposed method is validated by fatigue tests on center-hole metal specimens. The results show that the proposed method presents superior detection ability compared to other methods and can be used as an effective tool for cross-domain damage detection.
Open AccessFEM Simulation-Based Adversarial Domain Adaptation for Fatigue Crack Detection Using Lamb Wave
Lamb wave-based damage detection technology shows great potential for structural integrity assessment. However, conventional damage features based damage detection methods and data-driven intelligent damage detection methods highly rely on expert knowledge and sufficient labeled data for training, for which collecting is usually expensive and time-consuming. Therefore, this paper proposes an automated fatigue crack detection method using Lamb wave based on finite element method (FEM) and adversarial domain adaptation. FEM-simulation was used to obtain simulated response signals under various conditions to solve the problem of the insufficient labeled data in practice. Due to the distribution discrepancy between simulated signals and experimental signals, the detection performance of classifier just trained with simulated signals will drop sharply on the experimental signals. Then, Domain-adversarial neural network (DANN) with maximum mean discrepancy (MMD) was used to achieve discriminative and domain-invariant feature extraction between simulation source domain and experiment target domain, and the unlabeled experimental signals samples will be accurately classified. The proposed method is validated by fatigue tests on center-hole metal specimens. The results show that the proposed method presents superior detection ability compared to other methods and can be used as an effective tool for cross-domain damage detection.
- 19 July 2021
- Published by SAGE Publications in Structural Health Monitoring
- Vol. 21 (4) , 1432-1446
Probability-based diagnostic imaging with corrected weight distribution for damage detection of stiffened composite panel
Due to no requirement for direct interpretation of the guided wave signal, probability-based diagnostic imaging (PDI) algorithm is especially suitable for damage identification of complex composite structures. However, the weight distribution function of PDI algorithm is relatively inaccurate. It can reduce the damage localization accuracy. In order to improve the damage localization accuracy, an improved PDI algorithm is proposed. In the proposed algorithm, the weight distribution function is corrected by the acquired relative distances from defects to all actuator–sensor pairs and the reduction of the weight distribution areas. The validity of the proposed algorithm is assessed by identifying damages at different locations on a stiffened composite panel. The results show that the proposed algorithm can identify damage of a stiffened composite panel accurately.
- 19 July 2021
- Published by SAGE Publications in Structural Health Monitoring
- Vol. 21 (4) , 1432-1446
Probability-based diagnostic imaging with corrected weight distribution for damage detection of stiffened composite panel
Due to no requirement for direct interpretation of the guided wave signal, probability-based diagnostic imaging (PDI) algorithm is especially suitable for damage identification of complex composite structures. However, the weight distribution function of PDI algorithm is relatively inaccurate. It can reduce the damage localization accuracy. In order to improve the damage localization accuracy, an improved PDI algorithm is proposed. In the proposed algorithm, the weight distribution function is corrected by the acquired relative distances from defects to all actuator–sensor pairs and the reduction of the weight distribution areas. The validity of the proposed algorithm is assessed by identifying damages at different locations on a stiffened composite panel. The results show that the proposed algorithm can identify damage of a stiffened composite panel accurately.