HCHuiru Cui

Huiru Cui

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Huiru Cui has a total of 19 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    Computational Technique for Crack Propagation Simulation in Viscoelastic Solid Propellant

    by Qiangqiang Jiang, Xuan Lv, Huiru Cui, Teng Ma

    To further investigate the fracture response in propellant grain, numerical methodology is proposed to cope with crack propagation simulation especially for the mixed mode condition. The numerical discrete scheme of the propellant linear viscoelastic constitutive model is proposed, which provides a key means for the simulation of crack propagation. In order to simulate the cohesive traction distribution on the new crack surface, the extrinsic Park-Paulino-Roesler (PPR) cohesive zone model (CZM) is introduced. To let the crack propagate along any direction determined, element splitting technique and its corresponding topological operations are proposed step by step. Then, computational simulation implementation process is explained in greater detail. Typical fracture problem, single edge-notched tension test (SENT) is solved to demonstrate the efficiency and accuracy of the proposed method. In addition, double edge-notched tension test (DENT) as well as plate tension test with a slant crack is conducted to show the special fracture characters in viscoelastic solid propellant, like time dependence. Computational results reveal that the method proposed can be utilized in further fracture investigation in solid propellant combined with the experimental findings.


  • Open Access

    Investigation on Aging Model of Solid Propellant Using the Degree of Crosslinking

    by Junqi Wang, Huiru Cui, Weili Ma

    Solid propellant is the main part of solid rocket motor (SRM). To further investigate the service life of SRM, aging of solid propellant should be concerned. The aim of this study is to propose a new aging constitutive model of solid propellant using the degree of crosslinking. The aging development equation of viscoelastic Poisson’s ratio (VPR) and relaxation modulus are considered in establishing the model. A series accelerated aging experiments accompanied with some tensile tests are designed to verify the new model. Aging experiments show that degree of crosslinking (DCL) can be used to act as a link to facilitate the communication between chemical aging and aged mechanical parameters well.


  • Long‐Term and Short‐Term Creep Characteristic Analysis for HTPB Propellant

    by Kuangwei Deng, Haiyang Li, Jie Xu, Huiru Cui, Zhibin Shen

    A solid rocket motor is in storage for most of its life cycle, and propellant creep occurs subjected to gravity load. To analyse the creep characteristics of HTPB propellant during long‐term storage, MSC Marc is used to calculate the maximum von Mises stress of the motor under horizontal and vertical storage conditions. Based on the numerical results, the short‐term reciprocating creep test and long‐term creep test are designed and carried out. The results illustrate that the process of propellant creep from deformation to final failure can be divided into four stages: instantaneous deformation stage, attenuation creep stage, steady‐state creep stage and accelerated creep failure stage. When the creep stress level is less than 0.1 MPa, the creep characteristics tend to be stable. When the creep strain exceeds a certain critical value, the propellant will enter the steady‐state creep stage. The damage caused by creep rises with the increase of creep time and stress. When the maximum creep strain is less than 10 %, the creep damage can be fully recovered. The splicing curve of short‐term creep test data is in good agreement with that of long‐term creep test data. A mechanical long‐term creep test method is provided, and the parameters of the modified Burgers model are fitted. The text methods and conclusions can provide a reference for the evaluation of structural integrity and storage life of solid motor.


  • Research on Constant Speed Tension and Compression Mechanical Properties of Azide Polyether Propellant

    by Weijing Wu, Haiyang Li, Zhibin Shen, Huiru Cui

    Azide polyether propellant is a new type of high‐energy solid propellant with broad application prospects. In order to measure the mechanical properties of azide propellant, tensile tests of propellant under different loading conditions were carried out, and compression test pieces of azide propellant of different sizes were designed and tested, and the tensile and compressive stress‐strain curves of azide propellant were obtained. Through qualitative and quantitative analysis, the influence law of loading rate and temperature on the mechanical properties of propellant was obtained, the linear variation law of mechanical properties parameters with logarithmic strain rate was analyzed, and the mathematical relationship between propellant stiffness and strength was found. The master curve of the compressive initial modulus and maximum strength of the azide propellant was drawn. The test results can provide theoretical basis for the performance research of azide propellant and the nondestructive testing of this type of engine.


  • Open Access

    Design and Analysis of Direct Abort Orbits in the Earth-Moon Transfer Phase of Crewed Lunar Exploration Missions

    by Lin Lu, Haiyang Li, Wanmeng Zhou, Xinfeng Wu, Huiru Cui

    A direct abort orbit design method is presented for direct abort missions in the Earth-Moon transfer phase of crewed lunar exploration missions. First, according to the demand of an emergency rescue in the Earth-Moon transfer phase, two direct abort orbit schemes are introduced. Then, a serial orbit design method is proposed for a high-fidelity direct abort orbit. An analytical model is established for the calculation of initial values, and the optimization design is performed in the high-fidelity orbit model to determine a single-impulse abort orbit. A hybrid optimization design process is proposed to generate a two-impulse abort orbit. The results of simulation examples verify the validity and feasibility of the proposed direct abort orbit design method. Finally, extensive simulations are carried out to analyze the characteristics of abort impulse and abort return time and reveal the general rules of direct abort orbits. The research conclusions can provide a reference for the design of emergency rescue schemes in future crewed lunar exploration missions.


  • Open Access

    A Step-by-Step Equivalent Microprediction Method for the Mechanical Properties of Composite Solid Propellants considering Dewetting Damage

    by Huiru Cui, Xuan Lv, Yurong Xu, Zhiwen Zhong, Zixiang Zhou, Weili Ma

    Reliable prediction of the macromechanical properties of composite solid propellants in the microscale can accelerate the development of propellants with high mechanical properties. According to the characteristics of the composition ratio of a four-component hydroxyl-terminated polybutadiene (HTPB) propellant with the component ammonium perchlorate (AP), hydroxyl-terminated polybutadiene, aluminum powder (AL), and cyclotrimethylenetrinitramine (or RDX for short), an improved random delivery algorithm was developed to separately model filler particles with the different sizes. A step-by-step equivalent representative volume element (RVE) model was generated to reflect the microstructures of the propellant. The isotropy and uniformity of the RVE model were also tested using a two-point probability function. The Park-Paulino-Roesler (PPR) cohesive model was introduced to simulate the particle debonding (or dewetting) in solid propellant. The stress-strain curves of the propellant were obtained by the macroscopic test with the extension rate 200 mm/min at different temperatures. Based on these experimental data, the 8 characteristic parameters suitable for the microinterface of the propellant were obtained by using an inversion optimization method. A microscale finite element prediction model of the propellant considering dewetting damage was constructed to study the evolution process of the microdamage of the propellant. The predicted stress-strain curves of the propellant under different loading conditions were in good agreement with the test results.


  • Open Access

    Investigation on Viscoelastic Poisson’s Ratio of Composite Materials considering the Effects of Dewetting

    by Huiru Cui, Weili Ma, Xuan Lv, Changyuan Li, Yimin Ding

    A direct numerical method is introduced herein to investigate time-dependent Poisson’s ratio of solid propellant based on a representative volume element (RVE) model. Time-dependent longitudinal and transverse strains are considered in the calculation of time-dependent Poisson’s ratio under the relaxation test. The molecular dynamics (MD) packing algorithm is used to generate the high area fraction RVE model of solid propellants consisting of ammonium perchlorate (AP) particles whose radius follows lognormal distribution. In order to simulate the dewetting response of the interface between particles and matrix, the PPR model is modified and utilized during the analysis. Time-dependent Poisson’s ratio is measured under different cohesive parameters, loading conditions (loading temperature, loading rate, and fixed strain), and area fraction. Numerical results reveal that time-dependent Poisson’s ratio can be nonmonotonic or monotonic according to the different cohesive parameters. A concept of critical cohesive parameters is proposed to judge whether the monotonic property of time-dependent Poisson’s ratio appears or not. According to the numerical analysis, the cohesive contact and the shrinkage of the bulk element are two main factors which will control the change of monotonic property. All time-dependent Poisson’s ratios will increase at the beginning of the relaxation stage because the effects of cohesive contact can be ignored compared with the large shrinkage of the bulk element. However, with the increased shrinkage of the bulk element, the increased cohesive contact will defend further shrinkage at the same time. Although the shrink of the bulk element never changes its direction, the ratio of the transverse strain to longitudinal strain may decrease or keep increasing in this stage. When transverse and longitudinal strains stop to change, all time-dependent Poisson’s ratios will achieve their equilibrium values.


  • Open Access

    Mixed Cohesive Zone Modeling of Interface Debonding between Propellant and Insulation

    by Huiru Cui, Weili Ma

    High-quality interface between propellant and insulation is the strict requirement difficult to quantify in solid rocket motor. In this study, the mixed mode delamination process of propellant and insulation interface is considered in double cantilever sandwich beam (DCSB) and single lap-joint (SLJ) test. The PPR cohesive zone model (CZM) and bilinear CZM in ABAQUS are introduced in this mixed fracture progress. In order to implement the PPR model in ABAQUS, user subroutine user element (UEL) is programmed for the novel CZM. Two simple pure mode I and mode II fracture problems are designed to check the accuracy of the UEL, and the result of verification is excellent. DCSB and SLJ test and their corresponding results are used again in the same inverse analysis with the two typical effective displacement-based and potential-based CZM. Base on the results, a series discussion and some conclusions are made. The debonding progress of the propellant and insulation interface in DCSB and SLJ test are mixed mode. The PPR CZM is prior in simulation than the bilinear CZM in ABAQUS because the PPR CZM is much more flexible with changeable traction-separation shape. The real normal and tangential displacement at damage initiation shows the unreasonable change in bilinear CZM in ABAQUS under mixed mode fracture. The PPR CZM and bilinear CZM in ABAQUS are all thickness-dependent model. The real initial stiffness and the critical displacement in the bilinear CZM and the real maximum traction in PPR model are dependent on the thickness of cohesive element. The different thickness dependence of the two model is caused by the implementation method.