Xuan Lv
Research Subjects
Xuan Lv has a total of 9 co-authors. Here are the top co-authors by number of shared publications:
- Huiru Cui
College of Defense Engineering, Army Engineering University of PLA, Nanjing 210007, China
3 shared publications - Weili Ma
School of Science, Chang’an University, Xi’an 410073, China
2 shared publications - Changyuan Li
College of Defense Engineering, Army Engineering University of PLA, Nanjing 210007, China
1 shared publication Qiangqiang Jiang
College of Field Engineering, Army Engineering University of PLA, Nanjing 210007, China
1 shared publicationTeng Ma
System Design Institute of Hubei Aerospace Technology Academy, Wuhan 430040, China
1 shared publication- Yimin Ding
College of Defense Engineering, Army Engineering University of PLA, Nanjing 210007, China
1 shared publication
Latest Publications
- Open Access
- 15 June 2023
- Published by Wiley in International Journal of Aerospace Engineering
- Vol. 2023, 1-12
Computational Technique for Crack Propagation Simulation in Viscoelastic Solid Propellant
To further investigate the fracture response in propellant grain, numerical methodology is proposed to cope with crack propagation simulation especially for the mixed mode condition. The numerical discrete scheme of the propellant linear viscoelastic constitutive model is proposed, which provides a key means for the simulation of crack propagation. In order to simulate the cohesive traction distribution on the new crack surface, the extrinsic Park-Paulino-Roesler (PPR) cohesive zone model (CZM) is introduced. To let the crack propagate along any direction determined, element splitting technique and its corresponding topological operations are proposed step by step. Then, computational simulation implementation process is explained in greater detail. Typical fracture problem, single edge-notched tension test (SENT) is solved to demonstrate the efficiency and accuracy of the proposed method. In addition, double edge-notched tension test (DENT) as well as plate tension test with a slant crack is conducted to show the special fracture characters in viscoelastic solid propellant, like time dependence. Computational results reveal that the method proposed can be utilized in further fracture investigation in solid propellant combined with the experimental findings.
- 15 June 2023
- Published by Wiley in International Journal of Aerospace Engineering
- Vol. 2023, 1-12
Open AccessComputational Technique for Crack Propagation Simulation in Viscoelastic Solid Propellant
To further investigate the fracture response in propellant grain, numerical methodology is proposed to cope with crack propagation simulation especially for the mixed mode condition. The numerical discrete scheme of the propellant linear viscoelastic constitutive model is proposed, which provides a key means for the simulation of crack propagation. In order to simulate the cohesive traction distribution on the new crack surface, the extrinsic Park-Paulino-Roesler (PPR) cohesive zone model (CZM) is introduced. To let the crack propagate along any direction determined, element splitting technique and its corresponding topological operations are proposed step by step. Then, computational simulation implementation process is explained in greater detail. Typical fracture problem, single edge-notched tension test (SENT) is solved to demonstrate the efficiency and accuracy of the proposed method. In addition, double edge-notched tension test (DENT) as well as plate tension test with a slant crack is conducted to show the special fracture characters in viscoelastic solid propellant, like time dependence. Computational results reveal that the method proposed can be utilized in further fracture investigation in solid propellant combined with the experimental findings.
- Open Access
- 14 February 2022
- Published by Wiley in International Journal of Aerospace Engineering
- Vol. 2022, 1-12
A Step-by-Step Equivalent Microprediction Method for the Mechanical Properties of Composite Solid Propellants considering Dewetting Damage
Reliable prediction of the macromechanical properties of composite solid propellants in the microscale can accelerate the development of propellants with high mechanical properties. According to the characteristics of the composition ratio of a four-component hydroxyl-terminated polybutadiene (HTPB) propellant with the component ammonium perchlorate (AP), hydroxyl-terminated polybutadiene, aluminum powder (AL), and cyclotrimethylenetrinitramine (or RDX for short), an improved random delivery algorithm was developed to separately model filler particles with the different sizes. A step-by-step equivalent representative volume element (RVE) model was generated to reflect the microstructures of the propellant. The isotropy and uniformity of the RVE model were also tested using a two-point probability function. The Park-Paulino-Roesler (PPR) cohesive model was introduced to simulate the particle debonding (or dewetting) in solid propellant. The stress-strain curves of the propellant were obtained by the macroscopic test with the extension rate 200 mm/min at different temperatures. Based on these experimental data, the 8 characteristic parameters suitable for the microinterface of the propellant were obtained by using an inversion optimization method. A microscale finite element prediction model of the propellant considering dewetting damage was constructed to study the evolution process of the microdamage of the propellant. The predicted stress-strain curves of the propellant under different loading conditions were in good agreement with the test results.
- 14 February 2022
- Published by Wiley in International Journal of Aerospace Engineering
- Vol. 2022, 1-12
Open AccessA Step-by-Step Equivalent Microprediction Method for the Mechanical Properties of Composite Solid Propellants considering Dewetting Damage
Reliable prediction of the macromechanical properties of composite solid propellants in the microscale can accelerate the development of propellants with high mechanical properties. According to the characteristics of the composition ratio of a four-component hydroxyl-terminated polybutadiene (HTPB) propellant with the component ammonium perchlorate (AP), hydroxyl-terminated polybutadiene, aluminum powder (AL), and cyclotrimethylenetrinitramine (or RDX for short), an improved random delivery algorithm was developed to separately model filler particles with the different sizes. A step-by-step equivalent representative volume element (RVE) model was generated to reflect the microstructures of the propellant. The isotropy and uniformity of the RVE model were also tested using a two-point probability function. The Park-Paulino-Roesler (PPR) cohesive model was introduced to simulate the particle debonding (or dewetting) in solid propellant. The stress-strain curves of the propellant were obtained by the macroscopic test with the extension rate 200 mm/min at different temperatures. Based on these experimental data, the 8 characteristic parameters suitable for the microinterface of the propellant were obtained by using an inversion optimization method. A microscale finite element prediction model of the propellant considering dewetting damage was constructed to study the evolution process of the microdamage of the propellant. The predicted stress-strain curves of the propellant under different loading conditions were in good agreement with the test results.
- Open Access
- 1 February 2022
- Published by Wiley in International Journal of Aerospace Engineering
- Vol. 2022, 1-23
Investigation on Viscoelastic Poisson’s Ratio of Composite Materials considering the Effects of Dewetting
A direct numerical method is introduced herein to investigate time-dependent Poisson’s ratio of solid propellant based on a representative volume element (RVE) model. Time-dependent longitudinal and transverse strains are considered in the calculation of time-dependent Poisson’s ratio under the relaxation test. The molecular dynamics (MD) packing algorithm is used to generate the high area fraction RVE model of solid propellants consisting of ammonium perchlorate (AP) particles whose radius follows lognormal distribution. In order to simulate the dewetting response of the interface between particles and matrix, the PPR model is modified and utilized during the analysis. Time-dependent Poisson’s ratio is measured under different cohesive parameters, loading conditions (loading temperature, loading rate, and fixed strain), and area fraction. Numerical results reveal that time-dependent Poisson’s ratio can be nonmonotonic or monotonic according to the different cohesive parameters. A concept of critical cohesive parameters is proposed to judge whether the monotonic property of time-dependent Poisson’s ratio appears or not. According to the numerical analysis, the cohesive contact and the shrinkage of the bulk element are two main factors which will control the change of monotonic property. All time-dependent Poisson’s ratios will increase at the beginning of the relaxation stage because the effects of cohesive contact can be ignored compared with the large shrinkage of the bulk element. However, with the increased shrinkage of the bulk element, the increased cohesive contact will defend further shrinkage at the same time. Although the shrink of the bulk element never changes its direction, the ratio of the transverse strain to longitudinal strain may decrease or keep increasing in this stage. When transverse and longitudinal strains stop to change, all time-dependent Poisson’s ratios will achieve their equilibrium values.
- 1 February 2022
- Published by Wiley in International Journal of Aerospace Engineering
- Vol. 2022, 1-23
Open AccessInvestigation on Viscoelastic Poisson’s Ratio of Composite Materials considering the Effects of Dewetting
A direct numerical method is introduced herein to investigate time-dependent Poisson’s ratio of solid propellant based on a representative volume element (RVE) model. Time-dependent longitudinal and transverse strains are considered in the calculation of time-dependent Poisson’s ratio under the relaxation test. The molecular dynamics (MD) packing algorithm is used to generate the high area fraction RVE model of solid propellants consisting of ammonium perchlorate (AP) particles whose radius follows lognormal distribution. In order to simulate the dewetting response of the interface between particles and matrix, the PPR model is modified and utilized during the analysis. Time-dependent Poisson’s ratio is measured under different cohesive parameters, loading conditions (loading temperature, loading rate, and fixed strain), and area fraction. Numerical results reveal that time-dependent Poisson’s ratio can be nonmonotonic or monotonic according to the different cohesive parameters. A concept of critical cohesive parameters is proposed to judge whether the monotonic property of time-dependent Poisson’s ratio appears or not. According to the numerical analysis, the cohesive contact and the shrinkage of the bulk element are two main factors which will control the change of monotonic property. All time-dependent Poisson’s ratios will increase at the beginning of the relaxation stage because the effects of cohesive contact can be ignored compared with the large shrinkage of the bulk element. However, with the increased shrinkage of the bulk element, the increased cohesive contact will defend further shrinkage at the same time. Although the shrink of the bulk element never changes its direction, the ratio of the transverse strain to longitudinal strain may decrease or keep increasing in this stage. When transverse and longitudinal strains stop to change, all time-dependent Poisson’s ratios will achieve their equilibrium values.