Mohammad Asadian Ghahfarokhi
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Mohammad Asadian Ghahfarokhi has a total of 7 co-authors. Here are the top co-authors by number of shared publications:
- Seyed Reza Samaei
World Society of Sustainable Energy Technologies
8 shared publications - James Riffat
World Society of Sustainable Energy Technologies
2 shared publications - A. Bahmanpour
Department of Civil Engineering, SR.C., Islamic Azad University, Tehran, Iran
1 shared publication - Farhood Azarsina
Islamic Azad University
1 shared publication - H. Nasiri
Department of Civil Engineering, SR.C., Islamic Azad University, Tehran, Iran
1 shared publication - Madjid Ghodsi Hassanabad
Department of Mechanical Engineering, SR.C., Islamic Azad University, Tehran, Iran
1 shared publication
Latest Publications
- Open Access
- 3 October 2026
- Published by Cerebration Science Publishing Co., Limited in Journal of Climate Change
- Vol. 12 (3) , 23
Physics-Informed Multimodal Sensing and Machine Learning Framework with Real-Time Digital Twin for Intelligent Structural Health Monitoring of Marine Wharves
Marine wharves, consisting of concrete or steel decks supported by pile foundations, operate in harsh marine environments involving waves, vessel impacts, and corrosive seawater. Even minor cracks or early-stage corrosion in piles can lead to sudden structural failure. Early detection is therefore essential. Traditional vibration-based structural health monitoring (SHM) methods often struggle to deliver reliable results in real operational settings because environmental and operational variations can mask damage-induced frequency changes. This study presents a multimodal SHM framework that integrates accelerometers, strain gauges, high-resolution cameras, acoustic transducers, and corrosion sensors with edge computing, advanced machine learning, and a real-time physics-informed digital twin. Edge nodes preprocess sensor data to extract modal frequencies, crack indicators, and acoustic features, reducing communication loads by over 90% while preserving diagnostic fidelity. A hybrid pipeline combined attention-based multimodal fusion, XGBoost screening, and a feedforward deep neural network trained using a composite physics-informed objective. The physical loss numerically penalised positive damage-related modal-frequency shifts after environmental and operational condition compensation and stiffness ratios outside the admissible range of 0.70–1.00. The selected physics-loss coefficients were λphys = 0.10 and η = 0.50. Sensor features were ingested continuously, whereas finite-element state updates were event-triggered by a fused damage probability of at least 0.80, agreement between at least two sensing modalities, normalised predictive entropy not exceeding 0.35, and persistence over three consecutive 10-s analysis windows. Validation using 200 finite-element simulations and 40 scaled laboratory tests achieved 95.0% accuracy for single-damage detection, compared with 78.0% for the conventional Modal Strain Energy method. For multiple-damage cases, the proposed framework achieved 92.17% precision, 88.33% recall, and an F1-score of 90.21%. Damage-severity estimation yielded R² = 0.891 and an RMSE of 2.06 percentage points, while the mean full-scale-equivalent localisation error was 4.8 cm. Edge processing reduced communication volume by 94.73% without a statistically significant reduction in diagnostic accuracy. While evaluated under controlled conditions, the framework shows strong potential for proactive, accurate, and interpretable monitoring of marine wharves in operational environments.
- 3 October 2026
- Published by Cerebration Science Publishing Co., Limited in Journal of Climate Change
- Vol. 12 (3) , 23
Open AccessPhysics-Informed Multimodal Sensing and Machine Learning Framework with Real-Time Digital Twin for Intelligent Structural Health Monitoring of Marine Wharves
Marine wharves, consisting of concrete or steel decks supported by pile foundations, operate in harsh marine environments involving waves, vessel impacts, and corrosive seawater. Even minor cracks or early-stage corrosion in piles can lead to sudden structural failure. Early detection is therefore essential. Traditional vibration-based structural health monitoring (SHM) methods often struggle to deliver reliable results in real operational settings because environmental and operational variations can mask damage-induced frequency changes. This study presents a multimodal SHM framework that integrates accelerometers, strain gauges, high-resolution cameras, acoustic transducers, and corrosion sensors with edge computing, advanced machine learning, and a real-time physics-informed digital twin. Edge nodes preprocess sensor data to extract modal frequencies, crack indicators, and acoustic features, reducing communication loads by over 90% while preserving diagnostic fidelity. A hybrid pipeline combined attention-based multimodal fusion, XGBoost screening, and a feedforward deep neural network trained using a composite physics-informed objective. The physical loss numerically penalised positive damage-related modal-frequency shifts after environmental and operational condition compensation and stiffness ratios outside the admissible range of 0.70–1.00. The selected physics-loss coefficients were λphys = 0.10 and η = 0.50. Sensor features were ingested continuously, whereas finite-element state updates were event-triggered by a fused damage probability of at least 0.80, agreement between at least two sensing modalities, normalised predictive entropy not exceeding 0.35, and persistence over three consecutive 10-s analysis windows. Validation using 200 finite-element simulations and 40 scaled laboratory tests achieved 95.0% accuracy for single-damage detection, compared with 78.0% for the conventional Modal Strain Energy method. For multiple-damage cases, the proposed framework achieved 92.17% precision, 88.33% recall, and an F1-score of 90.21%. Damage-severity estimation yielded R² = 0.891 and an RMSE of 2.06 percentage points, while the mean full-scale-equivalent localisation error was 4.8 cm. Edge processing reduced communication volume by 94.73% without a statistically significant reduction in diagnostic accuracy. While evaluated under controlled conditions, the framework shows strong potential for proactive, accurate, and interpretable monitoring of marine wharves in operational environments.
- Open Access
- 1 December 2025
- Published by Caravel Press in Journal of Global Decarbonisation
- Vol. 1, 1-26
AI-Based Optimization and Hydrodynamic Performance of Floating Pontoon Breakwaters through Experimental and Numerical Modeling
Ensuring effective coastal protection requires not only attenuating incoming wave energy but also preserving the operational reliability of marine infrastructure. This study investigates the hydrodynamic behavior of two pontoon-type floating breakwaters—simple and stepped—through a combined program of new laboratory wave-flume experiments and high-fidelity numerical modeling in ANSYS AQWA. A 1:15 physical model was constructed and tested under regular waves with incident heights of 2.2–3.3 cm and periods of 0.44–0.84 s. The experiments showed that the simple pontoon achieved optimum energy dissipation at shorter wave periods (0.44 s), whereas the stepped configuration performed more efficiently in longer waves (0.84 s). Transmission coefficients (Kt) ranged from 0.2 to 1.5, with the stepped design consistently exhibiting stronger wave-energy reduction. Numerical simulations reproduced the laboratory findings with a maximum deviation of about 8%. To further enhance performance, an artificial-intelligence framework was developed that integrates artificial neural networks (ANNs) for rapid prediction of wave-induced loads, genetic algorithms (GAs) for multi-objective structural optimization, and reinforcement learning (RL) for adaptive real-time control. Together these methods lowered the mean transmission coefficient from 0.52 to 0.40 and improved computational efficiency by 88%. In addition, a prototype digital-twin environment, linked to an IoT sensor network, was established to enable continuous structural monitoring and to support condition-based maintenance. The results highlight the dominant influence of breakwater geometry, draft, and mooring characteristics on hydrodynamic behavior and demonstrate that AI-guided optimization provides a practical, scalable, and cost-effective pathway for designing resilient and low-carbon coastal infrastructure.
- 1 December 2025
- Published by Caravel Press in Journal of Global Decarbonisation
- Vol. 1, 1-26
Open AccessAI-Based Optimization and Hydrodynamic Performance of Floating Pontoon Breakwaters through Experimental and Numerical Modeling
Ensuring effective coastal protection requires not only attenuating incoming wave energy but also preserving the operational reliability of marine infrastructure. This study investigates the hydrodynamic behavior of two pontoon-type floating breakwaters—simple and stepped—through a combined program of new laboratory wave-flume experiments and high-fidelity numerical modeling in ANSYS AQWA. A 1:15 physical model was constructed and tested under regular waves with incident heights of 2.2–3.3 cm and periods of 0.44–0.84 s. The experiments showed that the simple pontoon achieved optimum energy dissipation at shorter wave periods (0.44 s), whereas the stepped configuration performed more efficiently in longer waves (0.84 s). Transmission coefficients (Kt) ranged from 0.2 to 1.5, with the stepped design consistently exhibiting stronger wave-energy reduction. Numerical simulations reproduced the laboratory findings with a maximum deviation of about 8%. To further enhance performance, an artificial-intelligence framework was developed that integrates artificial neural networks (ANNs) for rapid prediction of wave-induced loads, genetic algorithms (GAs) for multi-objective structural optimization, and reinforcement learning (RL) for adaptive real-time control. Together these methods lowered the mean transmission coefficient from 0.52 to 0.40 and improved computational efficiency by 88%. In addition, a prototype digital-twin environment, linked to an IoT sensor network, was established to enable continuous structural monitoring and to support condition-based maintenance. The results highlight the dominant influence of breakwater geometry, draft, and mooring characteristics on hydrodynamic behavior and demonstrate that AI-guided optimization provides a practical, scalable, and cost-effective pathway for designing resilient and low-carbon coastal infrastructure.
- Open Access
- 10 October 2025
- Published by Caravel Press in Energy Catalyst
- Vol. 1, 104-112
Hydrodynamic Assessment of Floating Dock Behavior: A Case Study in Bahonar Port, Bandar Abbas
Floating marine structures have become increasingly prominent due to their adaptability, ease of installation, and cost-effectiveness compared with traditional fixed docks and breakwaters. Serving functions such as wave attenuation and vessel berthing, these systems are particularly suitable for regions affected by tidal variations or soft seabed conditions. This study provides a detailed hydrodynamic assessment of modular floating docks developed for Bahonar Port in Bandar Abbas. The investigation began with the geometric modeling of pontoon modules using CATIA, followed by dynamic simulations in ANSYS AQWA to analyze wave–structure interactions. The analysis concentrated on the principal motion responses—heave, roll, and pitch—under various wave incidence angles. The results show that increasing pontoon draft decreases the system’s natural frequency, whereas wider pontoons effectively reduce heave amplitudes due to enhanced hydrodynamic inertia. Furthermore, the optimal alignment of the dock relative to prevailing wave directions markedly lowers environmental loading. Overall, the findings demonstrate that articulated multi-hull floating docks can substantially reduce vertical displacements and improve stability, particularly for highspeed vessel operations. The Response Amplitude Operator (RAO) analysis further clarifies the motion characteristics of the system across a wide range of sea states, offering valuable insights for the design of resilient and efficient floating dock structures
- 10 October 2025
- Published by Caravel Press in Energy Catalyst
- Vol. 1, 104-112
Open AccessHydrodynamic Assessment of Floating Dock Behavior: A Case Study in Bahonar Port, Bandar Abbas
Floating marine structures have become increasingly prominent due to their adaptability, ease of installation, and cost-effectiveness compared with traditional fixed docks and breakwaters. Serving functions such as wave attenuation and vessel berthing, these systems are particularly suitable for regions affected by tidal variations or soft seabed conditions. This study provides a detailed hydrodynamic assessment of modular floating docks developed for Bahonar Port in Bandar Abbas. The investigation began with the geometric modeling of pontoon modules using CATIA, followed by dynamic simulations in ANSYS AQWA to analyze wave–structure interactions. The analysis concentrated on the principal motion responses—heave, roll, and pitch—under various wave incidence angles. The results show that increasing pontoon draft decreases the system’s natural frequency, whereas wider pontoons effectively reduce heave amplitudes due to enhanced hydrodynamic inertia. Furthermore, the optimal alignment of the dock relative to prevailing wave directions markedly lowers environmental loading. Overall, the findings demonstrate that articulated multi-hull floating docks can substantially reduce vertical displacements and improve stability, particularly for highspeed vessel operations. The Response Amplitude Operator (RAO) analysis further clarifies the motion characteristics of the system across a wide range of sea states, offering valuable insights for the design of resilient and efficient floating dock structures
- Open Access
- 7 October 2025
- Published by Caravel Press in Energy Catalyst
- Vol. 1, 89-103
Assessment of Dynamic Behavior of Solid Cylinders in Different Configurations under Vortex-Induced Vibrations
The study of fluid flow around cylindrical structures presents significant challenges due to the generation of drag, lift forces, and vortex-induced vibrations (VIV), which can impact structural stability and energy harvesting applications. This research evaluates the dynamic response of solid cylinders in various configurations under VIV using computational fluid dynamics (CFD). Simulations were conducted using ANSYS Fluent with a 10 m/s inlet airflow surrounding five turbine base-like columns. A structured mesh with 63,699 independent cells ensured numerical accuracy, maintaining a mesh quality of approximately 0.8. Mass conservation reports confirm third-order accuracy, validating the computational model. The velocity vector analysis highlights flow deflection around obstacles, with localized velocity spikes reaching 22.4 m/s, in agreement with Bernoulli’s principle. Contour plots of static and dynamic pressure demonstrate pressure fluctuations upon obstacle interaction, leading to vortex shedding and oscillatory forces. These fluctuations range between 48.9 and 3.98 kPa, significantly influencing the structural response. Findings indicate that VIV-induced oscillations vary with cylinder arrangement, affecting stability and fatigue life. Understanding these interactions is crucial for optimizing offshore wind turbine foundations, marine risers, and energy harvesting devices. The study contributes to the efficient design of offshore structures, reducing fatigue damage and enhancing resilience against fluid-induced vibrations.
- 7 October 2025
- Published by Caravel Press in Energy Catalyst
- Vol. 1, 89-103
Open AccessAssessment of Dynamic Behavior of Solid Cylinders in Different Configurations under Vortex-Induced Vibrations
The study of fluid flow around cylindrical structures presents significant challenges due to the generation of drag, lift forces, and vortex-induced vibrations (VIV), which can impact structural stability and energy harvesting applications. This research evaluates the dynamic response of solid cylinders in various configurations under VIV using computational fluid dynamics (CFD). Simulations were conducted using ANSYS Fluent with a 10 m/s inlet airflow surrounding five turbine base-like columns. A structured mesh with 63,699 independent cells ensured numerical accuracy, maintaining a mesh quality of approximately 0.8. Mass conservation reports confirm third-order accuracy, validating the computational model. The velocity vector analysis highlights flow deflection around obstacles, with localized velocity spikes reaching 22.4 m/s, in agreement with Bernoulli’s principle. Contour plots of static and dynamic pressure demonstrate pressure fluctuations upon obstacle interaction, leading to vortex shedding and oscillatory forces. These fluctuations range between 48.9 and 3.98 kPa, significantly influencing the structural response. Findings indicate that VIV-induced oscillations vary with cylinder arrangement, affecting stability and fatigue life. Understanding these interactions is crucial for optimizing offshore wind turbine foundations, marine risers, and energy harvesting devices. The study contributes to the efficient design of offshore structures, reducing fatigue damage and enhancing resilience against fluid-induced vibrations.
- 1 September 2025
- Published by Springer Nature in International Journal of Environmental Science and Technology
- Vol. 22 (14) , 13631-13644
Reducing oil spills created by explosions in seabed pipelines with innovative coatings to protect marine ecosystems
- 1 September 2025
- Published by Springer Nature in International Journal of Environmental Science and Technology
- Vol. 22 (14) , 13631-13644
Reducing oil spills created by explosions in seabed pipelines with innovative coatings to protect marine ecosystems
- Open Access
- 1 August 2025
- Published by National Academy of Sciences of Tajikistan in International Journal of Maritime Technology
- Vol. 21 (2) , 46-60
Hydrodynamic Performance Analysis of Modular Chain-Type Floating Docks for High-Speed Boat Operations in Semi-Enclosed Port Basins: A Multi-Body Simulation Approach using ANSYS AQWA
This study investigates the hydrodynamic performance of modular, chain-type floating docks designed for high-speed boat deployment within the operational zone of Shahid Bahonar Port. Given the limitations of fixed dock infrastructure—particularly in regions with soft seabeds and tidal variations—floating docks offer a flexible, cost-effective alternative. A modular pontoon system was designed using ...
- 1 August 2025
- Published by National Academy of Sciences of Tajikistan in International Journal of Maritime Technology
- Vol. 21 (2) , 46-60
Open AccessHydrodynamic Performance Analysis of Modular Chain-Type Floating Docks for High-Speed Boat Operations in Semi-Enclosed Port Basins: A Multi-Body Simulation Approach using ANSYS AQWA
This study investigates the hydrodynamic performance of modular, chain-type floating docks designed for high-speed boat deployment within the operational zone of Shahid Bahonar Port. Given the limitations of fixed dock infrastructure—particularly in regions with soft seabeds and tidal variations—floating docks offer a flexible, cost-effective alternative. A modular pontoon system was designed using ...
- Open Access
- 1 January 2025
- Published by National Academy of Sciences of Tajikistan in International Journal of Maritime Technology
- Vol. 21 (1) , 28-43
Parameter study for enhancing the speed of a high-speed craft prototype with adequate maneuverability
The demand for high-speed crafts has grown rapidly due to their strategic importance and quick response capabilities. Governments prioritize their development through research and industry advancements. Designing a high-speed craft exceeding 60 knots requires significant time and cost. This study identifies key factors for optimizing speed and maneuverability through hull modifications, ...
- 1 January 2025
- Published by National Academy of Sciences of Tajikistan in International Journal of Maritime Technology
- Vol. 21 (1) , 28-43
Open AccessParameter study for enhancing the speed of a high-speed craft prototype with adequate maneuverability
The demand for high-speed crafts has grown rapidly due to their strategic importance and quick response capabilities. Governments prioritize their development through research and industry advancements. Designing a high-speed craft exceeding 60 knots requires significant time and cost. This study identifies key factors for optimizing speed and maneuverability through hull modifications, ...
- Open Access
- 1 January 2025
- Published by National Academy of Sciences of Tajikistan in International Journal of Maritime Technology
- Vol. 21 (1) , 12-27
Hydrodynamic Performance and Stability Optimization of High-Speed Monohull Vessels with Chine Hulls: A Computational and Experimental Approach
High-speed monohull vessels with chine hulls are widely used due to their simple design, but maintaining optimal performance at high speeds requires precise hull force analysis. This study utilizes 3D scanning to capture hull geometry, refining it in AutoCAD for efficiency. Hydrostatic and hydrodynamic assessments are conducted using Maxsurf, applying ...
- 1 January 2025
- Published by National Academy of Sciences of Tajikistan in International Journal of Maritime Technology
- Vol. 21 (1) , 12-27
Open AccessHydrodynamic Performance and Stability Optimization of High-Speed Monohull Vessels with Chine Hulls: A Computational and Experimental Approach
High-speed monohull vessels with chine hulls are widely used due to their simple design, but maintaining optimal performance at high speeds requires precise hull force analysis. This study utilizes 3D scanning to capture hull geometry, refining it in AutoCAD for efficiency. Hydrostatic and hydrodynamic assessments are conducted using Maxsurf, applying ...
- Open Access
- 28 March 2024
- Published by Springer Nature in Research Square
Parameter study for enhancing the speed of a high-speed craft prototype with adequate maneuverability
Today, the use of high-speed crafts in small dimensions has rapidly expanded due to their high capabilities in quick and timely responsiveness, considering the strategic situations of countries. They are heavily prioritized in the agendas of research, investigations, and industries across all governments. Achieving the appropriate dimensions, size, and hull form for a high-speed craft exceeding 60 knots requires considerable time and expense. This research aims to identify the influential factors in increasing the speed of a high-speed craft prototype with adequate maneuverability so that desired speeds can be achieved rapidly and cost-effectively through effective modifications to the hull lines, chines positions, hull indentations, propulsion system, initial trim, etc. Initially, the sample craft was scanned, and simulations were conducted using MAXSURF software. The hull of the craft was uniformly adjusted according to the final modifications, and all hydrostatic and hydrodynamic calculations on the modified hull were performed. From the results of this research, it can be noted that to achieve the desired speed of over 60 knots, the initial trim angle must be at least 0.4 degrees on the transom. Achieving this required adjustment of hull lines and equipment placement. Additionally, the desired craft, with a safety factor of 1.25, requires an effective power of approximately 600 horsepower to reach the desired speed.
- 28 March 2024
- Published by Springer Nature in Research Square
Open AccessParameter study for enhancing the speed of a high-speed craft prototype with adequate maneuverability
Today, the use of high-speed crafts in small dimensions has rapidly expanded due to their high capabilities in quick and timely responsiveness, considering the strategic situations of countries. They are heavily prioritized in the agendas of research, investigations, and industries across all governments. Achieving the appropriate dimensions, size, and hull form for a high-speed craft exceeding 60 knots requires considerable time and expense. This research aims to identify the influential factors in increasing the speed of a high-speed craft prototype with adequate maneuverability so that desired speeds can be achieved rapidly and cost-effectively through effective modifications to the hull lines, chines positions, hull indentations, propulsion system, initial trim, etc. Initially, the sample craft was scanned, and simulations were conducted using MAXSURF software. The hull of the craft was uniformly adjusted according to the final modifications, and all hydrostatic and hydrodynamic calculations on the modified hull were performed. From the results of this research, it can be noted that to achieve the desired speed of over 60 knots, the initial trim angle must be at least 0.4 degrees on the transom. Achieving this required adjustment of hull lines and equipment placement. Additionally, the desired craft, with a safety factor of 1.25, requires an effective power of approximately 600 horsepower to reach the desired speed.
- 20 November 2016
- Published by University of Liege in Bulletin de la Société Royale des Sciences de Liège
- p. 1487-1499
Numerical Simulation of Floating Pontoon Breakwater with ANSYS AQWA Software and Validation of the Results with Laboratory Data
The application of engineering software’s to design and analyze civil infrastructures is increasing. In this regard, computational fluid dynamics software’s used for the examination of the interaction of coastal and marine structures with waves play a unique role in the implementation of marine projects, since the operating costs of sea is significantly higher than that of land. In the present study, two models of floating pontoon breakwaters (i.e. simple pontoon as the first model and step pontoon as the second model) have been simulated with the application of ANSYS AQWA software. The main indicator of breakwater performance is the wave transmission coefficient (i.e. the ratio of the wave height on the back of the breakwater to the wave height entering the coastal zone) which is examined with the consideration of the changes occurring in the physical parameters such as draft, period, and amplitude of waves. The software solves the wave-structure interaction problem with the application of the boundary element method based on Laplace equation and presents water level meter as the output. Finally, the numerical results and the output of the software have been compared with the laboratory results to pursue the verification purpose. Laboratory data were extracted by the same team of researchers at Science and Research branch of Islamic Azad University. Furthermore, the obtained errors and deviations as well as the best possible performance and status of breakwaters at different waves have been specified.
- 20 November 2016
- Published by University of Liege in Bulletin de la Société Royale des Sciences de Liège
- p. 1487-1499
Numerical Simulation of Floating Pontoon Breakwater with ANSYS AQWA Software and Validation of the Results with Laboratory Data
The application of engineering software’s to design and analyze civil infrastructures is increasing. In this regard, computational fluid dynamics software’s used for the examination of the interaction of coastal and marine structures with waves play a unique role in the implementation of marine projects, since the operating costs of sea is significantly higher than that of land. In the present study, two models of floating pontoon breakwaters (i.e. simple pontoon as the first model and step pontoon as the second model) have been simulated with the application of ANSYS AQWA software. The main indicator of breakwater performance is the wave transmission coefficient (i.e. the ratio of the wave height on the back of the breakwater to the wave height entering the coastal zone) which is examined with the consideration of the changes occurring in the physical parameters such as draft, period, and amplitude of waves. The software solves the wave-structure interaction problem with the application of the boundary element method based on Laplace equation and presents water level meter as the output. Finally, the numerical results and the output of the software have been compared with the laboratory results to pursue the verification purpose. Laboratory data were extracted by the same team of researchers at Science and Research branch of Islamic Azad University. Furthermore, the obtained errors and deviations as well as the best possible performance and status of breakwaters at different waves have been specified.