James A. Gott
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
James A. Gott has a total of 130 co-authors. Here are the top co-authors by number of shared publications:
- Louis F. J. Piper
University of Warwick
6 shared publications - Arne Benjamin Renz
University of Warwick
5 shared publications - Ashok Sreekumar Menon
WMG, University of Warwick
5 shared publications - Marina Antoniou
University of Warwick
5 shared publications - Peter Michael Gammon
University of Warwick
5 shared publications - Eleni Fiamegkou
University of Warwick
4 shared publications
Latest Publications
- Open Access
- 18 November 2026
- Published by AIP Publishing in Journal of Applied Physics
- Vol. 140 (19)
Optical-pump terahertz-probe spectroscopy can separate surface and bulk carrier recombination in thick 4H-SiC epitaxial layers
Electronically synchronized optical-pump terahertz-probe spectroscopy is a non-contact technique that measures transient photoconductance decay with sub-nanosecond temporal resolution while independently probing surface- and bulk-sensitive carrier dynamics by resolving temporally separated THz echoes. Here, we apply this technique to 4H-SiC epitaxial layers each with a 200 μm-thick N+PN− multilayer structure. As-grown material exhibits similar surface- and bulk-sensitive photoconductance decays for N+ and N− excitation, whereas a double-side thermal oxidation process produces distinct surface dynamics and progressively slower bulk decays, indicating a substantial increase in bulk carrier lifetime. A one-dimensional diffusion-recombination model simultaneously reproduces all measured transients, providing a consistent description of carrier diffusion, effective boundary losses, and bulk recombination, and indicating progressive passivation of the lifetime-limiting Z1/2 defects following oxidation. The fitted bulk lifetime increases from approximately 1.3 μs in the as-grown sample to 9–10 μs after 8 h oxidation and 20–37 μs after 16 h oxidation, with the latter range reflecting the assumed ambipolar mobility. These results establish reflection-mode electronically synchronized optical-pump terahertz-probe as a powerful non-contact technique for distinguishing surface and bulk recombination dynamics in thick, complex SiC epitaxial structures.
- 18 November 2026
- Published by AIP Publishing in Journal of Applied Physics
- Vol. 140 (19)
Open AccessOptical-pump terahertz-probe spectroscopy can separate surface and bulk carrier recombination in thick 4H-SiC epitaxial layers
Electronically synchronized optical-pump terahertz-probe spectroscopy is a non-contact technique that measures transient photoconductance decay with sub-nanosecond temporal resolution while independently probing surface- and bulk-sensitive carrier dynamics by resolving temporally separated THz echoes. Here, we apply this technique to 4H-SiC epitaxial layers each with a 200 μm-thick N+PN− multilayer structure. As-grown material exhibits similar surface- and bulk-sensitive photoconductance decays for N+ and N− excitation, whereas a double-side thermal oxidation process produces distinct surface dynamics and progressively slower bulk decays, indicating a substantial increase in bulk carrier lifetime. A one-dimensional diffusion-recombination model simultaneously reproduces all measured transients, providing a consistent description of carrier diffusion, effective boundary losses, and bulk recombination, and indicating progressive passivation of the lifetime-limiting Z1/2 defects following oxidation. The fitted bulk lifetime increases from approximately 1.3 μs in the as-grown sample to 9–10 μs after 8 h oxidation and 20–37 μs after 16 h oxidation, with the latter range reflecting the assumed ambipolar mobility. These results establish reflection-mode electronically synchronized optical-pump terahertz-probe as a powerful non-contact technique for distinguishing surface and bulk recombination dynamics in thick, complex SiC epitaxial structures.
- Open Access
- 21 May 2026
- Published by Trans Tech Publications, Ltd. in Key Engineering Materials
- Vol. 1057, 95-101
Body Diode Performance of the 4H-SiC 3.3 kV Semi-SJ MOSFET
This study investigates static and dynamic behavior of a 3.3 kV semi-Superjunction (SJ) MOSFET, compared with a conventional planar MOSFET. The semi-SJ was designed using a cost-effective trench side-wall implantation and SiO 2 refill fabrication method and evaluated through TCAD simulations. The optimized semi-SJ MOSFET designs, reduces R ON by 19% and increases BV by 500 V compared with the planar MOSFET, while maintaining a comparable reverse recovery charge (Q RR ). The proposed semi-SJ design demonstrated the best R ON ×Q RR figure of merit (17.8 mΩ·µC), outperforming the conventional planar MOSFET design (19.7 mΩ·µC).
- 21 May 2026
- Published by Trans Tech Publications, Ltd. in Key Engineering Materials
- Vol. 1057, 95-101
Open AccessBody Diode Performance of the 4H-SiC 3.3 kV Semi-SJ MOSFET
This study investigates static and dynamic behavior of a 3.3 kV semi-Superjunction (SJ) MOSFET, compared with a conventional planar MOSFET. The semi-SJ was designed using a cost-effective trench side-wall implantation and SiO 2 refill fabrication method and evaluated through TCAD simulations. The optimized semi-SJ MOSFET designs, reduces R ON by 19% and increases BV by 500 V compared with the planar MOSFET, while maintaining a comparable reverse recovery charge (Q RR ). The proposed semi-SJ design demonstrated the best R ON ×Q RR figure of merit (17.8 mΩ·µC), outperforming the conventional planar MOSFET design (19.7 mΩ·µC).
- Open Access
- 20 May 2026
- Published by Trans Tech Publications, Ltd. in Materials Science Forum
- Vol. 1192, 59-65
Preliminary Study into Ferroelectric Properties of ALD Al-Doped HfO2/SiO2/ 4H-SiC MOS Capacitors for Improved Short Circuit Reliability
We investigate the physical and electrical characteristics of the Al-doped or undoped HfO 2 /SiO 2 gate stacks on 4H-SiC by testing MOSCAP chips fabricated in house. A clear reduction in accumulation capacitance (C ox ) with increasing chuck temperature from room temperature up to 523 K is observed, with Al-doping playing a key role and aligning with temperature-dependent Landau ferroelectric theory. Chips annealed at 1100°C in N₂ ambient show the highest C ox decrease rates while maintaining functional MOS interfaces with acceptable flatband voltage, hysteresis, and Dit profiles. TCAD simulations on a double trench MOSFET model, based on the extracted data indicate improved electro-thermal performance, demonstrating that Al-doped HfO₂/SiO₂ gate stacks are a promising approach for enhancing 4H-SiC power devices.
- 20 May 2026
- Published by Trans Tech Publications, Ltd. in Materials Science Forum
- Vol. 1192, 59-65
Open AccessPreliminary Study into Ferroelectric Properties of ALD Al-Doped HfO2/SiO2/ 4H-SiC MOS Capacitors for Improved Short Circuit Reliability
We investigate the physical and electrical characteristics of the Al-doped or undoped HfO 2 /SiO 2 gate stacks on 4H-SiC by testing MOSCAP chips fabricated in house. A clear reduction in accumulation capacitance (C ox ) with increasing chuck temperature from room temperature up to 523 K is observed, with Al-doping playing a key role and aligning with temperature-dependent Landau ferroelectric theory. Chips annealed at 1100°C in N₂ ambient show the highest C ox decrease rates while maintaining functional MOS interfaces with acceptable flatband voltage, hysteresis, and Dit profiles. TCAD simulations on a double trench MOSFET model, based on the extracted data indicate improved electro-thermal performance, demonstrating that Al-doped HfO₂/SiO₂ gate stacks are a promising approach for enhancing 4H-SiC power devices.
- Open Access
- 6 April 2026
- Published by AIP Publishing in Applied Physics Letters
- Vol. 128 (14)
Investigation of temperature-dependent oxide capacitance in paraelectric monoclinic doped HfO2/SiO2 gate stacks implemented on 4H-SiC
Doped, monoclinic HfO2 exhibits the paraelectric property of decreasing dielectric constant with increasing temperature. If utilized as the gate oxide of a metal–oxide–semiconductor field-effect transistor, this effect could enable a self-limiting reduction in current passing through the device during intermittent faults like short circuits. This study fabricates gate stacks comprising 30 nm doped HfO2 layers, on a 6 nm SiO2 interlayer, deposited via atomic layer deposition onto 4H-SiC epitaxial wafers to form MOS capacitors (MOSCAPs). Different dopant types (Al and Si) and ratios for doped HfO2 are investigated, with annealing temperatures ranging from 900 to 1100 °C. X-ray diffraction analysis confirms that all the annealed chips are predominantly monoclinic, and the unannealed chips amorphous. Electrical measurements assess the viability of the layers according to conventional SiC-oxide metrics such as flatband voltage, hysteresis, interface state density (DIT), and gate leakage current (IL), while also considering the change in accumulation gate capacitance (ΔCOX) against temperature. The most promising results came from MOSCAPs using a doped HfO2 layer using a 1:19 Al2O3:HfO2 deposition ratio, annealed at 1100 °C in N2. This combination yielded the lowest average DIT of 5.47 × 1011 eV−1 cm−2, and a ΔCOX of −19% between room temperature and 523 K. However, the drawback was the high IL observed in all 1100 °C annealed layers. Scanning electron microscopy indicated the large crystal grain boundaries on the HfO2 surface during annealing to be the probable cause of the gate leakage. Unannealed amorphous chips offer lower IL but sacrificed performance across other crucial electrical and ΔCOX parameters.
- 6 April 2026
- Published by AIP Publishing in Applied Physics Letters
- Vol. 128 (14)
Open AccessInvestigation of temperature-dependent oxide capacitance in paraelectric monoclinic doped HfO2/SiO2 gate stacks implemented on 4H-SiC
Doped, monoclinic HfO2 exhibits the paraelectric property of decreasing dielectric constant with increasing temperature. If utilized as the gate oxide of a metal–oxide–semiconductor field-effect transistor, this effect could enable a self-limiting reduction in current passing through the device during intermittent faults like short circuits. This study fabricates gate stacks comprising 30 nm doped HfO2 layers, on a 6 nm SiO2 interlayer, deposited via atomic layer deposition onto 4H-SiC epitaxial wafers to form MOS capacitors (MOSCAPs). Different dopant types (Al and Si) and ratios for doped HfO2 are investigated, with annealing temperatures ranging from 900 to 1100 °C. X-ray diffraction analysis confirms that all the annealed chips are predominantly monoclinic, and the unannealed chips amorphous. Electrical measurements assess the viability of the layers according to conventional SiC-oxide metrics such as flatband voltage, hysteresis, interface state density (DIT), and gate leakage current (IL), while also considering the change in accumulation gate capacitance (ΔCOX) against temperature. The most promising results came from MOSCAPs using a doped HfO2 layer using a 1:19 Al2O3:HfO2 deposition ratio, annealed at 1100 °C in N2. This combination yielded the lowest average DIT of 5.47 × 1011 eV−1 cm−2, and a ΔCOX of −19% between room temperature and 523 K. However, the drawback was the high IL observed in all 1100 °C annealed layers. Scanning electron microscopy indicated the large crystal grain boundaries on the HfO2 surface during annealing to be the probable cause of the gate leakage. Unannealed amorphous chips offer lower IL but sacrificed performance across other crucial electrical and ΔCOX parameters.
- Open Access
- 1 April 2026
- Published by American Chemical Society (ACS) in ChemRxiv
Artificial Intelligence Driven Optimisation of LMFP Microstructure for Enhanced Lithium-ion Battery Performance
Establishing optimised lithium-ion battery manufacturing processes is a multi-factored, application dependent, and typically resource-intensive challenge, involving the assembly and testing of large numbers of cells over a long period of time. This effectively slows the development and adoption of new technologies. In this work, we adopt and evaluate an accelerated artificial intelligence (AI) assisted method for optimisation of cell manufacturing processes, utilising an LiMn x Fe 1-x PO 4 (LMFP) cathode as a model system. Electrode microstructure (controlled via the calendaring process) was optimised for 4680 cylindrical cell performance via AI analysis of microscopy images and electrochemical data from only a relatively small number of manufactured coin cells, dramatically reducing needed development time and cost. Through this analysis, an optimised electrode density for high power performance (2.8 g cm -3 ) was identified and experimentally verified. The optimised density, balancing electronic and ionic transport, provided enhanced volumetric energy density under fast-charging conditions (1 C – 3 C, geared for electric vehicles). This study quantitatively outlines the role of LMFP electrode density on performance and highlights the growing relevance of AI-based approaches as an effective tool in advancing lithium-ion battery research and development.
- 1 April 2026
- Published by American Chemical Society (ACS) in ChemRxiv
Open AccessArtificial Intelligence Driven Optimisation of LMFP Microstructure for Enhanced Lithium-ion Battery Performance
Establishing optimised lithium-ion battery manufacturing processes is a multi-factored, application dependent, and typically resource-intensive challenge, involving the assembly and testing of large numbers of cells over a long period of time. This effectively slows the development and adoption of new technologies. In this work, we adopt and evaluate an accelerated artificial intelligence (AI) assisted method for optimisation of cell manufacturing processes, utilising an LiMn x Fe 1-x PO 4 (LMFP) cathode as a model system. Electrode microstructure (controlled via the calendaring process) was optimised for 4680 cylindrical cell performance via AI analysis of microscopy images and electrochemical data from only a relatively small number of manufactured coin cells, dramatically reducing needed development time and cost. Through this analysis, an optimised electrode density for high power performance (2.8 g cm -3 ) was identified and experimentally verified. The optimised density, balancing electronic and ionic transport, provided enhanced volumetric energy density under fast-charging conditions (1 C – 3 C, geared for electric vehicles). This study quantitatively outlines the role of LMFP electrode density on performance and highlights the growing relevance of AI-based approaches as an effective tool in advancing lithium-ion battery research and development.
- Open Access
- 8 September 2025
- Published by Trans Tech Publications, Ltd. in Materials Science Forum
- Vol. 1158, 67-74
Investigation of Interface and Reliability of 3C- and 4H-SiC MOS Structures through Gate Dielectric Stacking and Post-Deposition Annealing
This study investigates the interface and reliability of metal-oxide-semiconductor capacitors (MOSCAPs) based on 3C-SiC and 4H-SiC using atomic layer deposition (ALD) and post-deposition annealing (PDA). SiO2 and HfO2/SiO2 were used as dielectric layers, with systematic PDA treatments conducted at 600°C, 900°C, and 1100°C in N₂ or forming gas (FG, a mixture of H2 and N2) environments to evaluate the impact of the PDA conditions on the interface characteristics of SiC MOSCAPs. The flat-band voltage for 3C-SiC MOSCAPs averaged at 0.68 ± 0.05 V for SiO2/3C-SiC/Si samples and 2.35 ± 0.01 V for HfO2/SiO2/3C-SiC samples when MOSCAPs annealed at 1100°C in FG. PDA in forming gas also significantly reduced hysteresis, dropping from 1.75 V to 0.18 V for SiO2/3C-SiC and from 2.49 V to 0.04 V for HfO2/SiO2/3C-SiC samples. For 4H-SiC MOSCAPs, as-deposited devices exhibited high oxide charges and poor interface quality. The average flat-band voltages for SiO2/4H-SiC were 9.01 ± 0.15 V, while HfO2/SiO2 MOSCAPs showed 6.65 ± 0.02 V. After PDA at 1100°C, the flat-band voltage improved to-0.65 ± 0.035 V for SiO2/4H-SiC and-0.50 ± 0.05 V for HfO2/SiO2/4H-SiC. Additionally, hysteresis was reduced from 0.61 V to 0.15 V for SiO2/4H-SiC and from 0.23 V to 0.05 V for HfO2/SiO2/4H-SiC samples. We propose a figure of merit (FOM) which is defined as the ratio of the breakdown field to the product of flatband voltage shift, hysteresis effect, and density of interface states. The results demonstrate that PDA significantly enhances the interface quality and electrical characteristics of the MOS capacitors (MOSCAPs), with nitrogen (N2) PDA yielding higher FOM for 4H-SiC stacks and forming FG PDA showing superior interfacial quality for 3C-SiC stacks.
- 8 September 2025
- Published by Trans Tech Publications, Ltd. in Materials Science Forum
- Vol. 1158, 67-74
Open AccessInvestigation of Interface and Reliability of 3C- and 4H-SiC MOS Structures through Gate Dielectric Stacking and Post-Deposition Annealing
This study investigates the interface and reliability of metal-oxide-semiconductor capacitors (MOSCAPs) based on 3C-SiC and 4H-SiC using atomic layer deposition (ALD) and post-deposition annealing (PDA). SiO2 and HfO2/SiO2 were used as dielectric layers, with systematic PDA treatments conducted at 600°C, 900°C, and 1100°C in N₂ or forming gas (FG, a mixture of H2 and N2) environments to evaluate the impact of the PDA conditions on the interface characteristics of SiC MOSCAPs. The flat-band voltage for 3C-SiC MOSCAPs averaged at 0.68 ± 0.05 V for SiO2/3C-SiC/Si samples and 2.35 ± 0.01 V for HfO2/SiO2/3C-SiC samples when MOSCAPs annealed at 1100°C in FG. PDA in forming gas also significantly reduced hysteresis, dropping from 1.75 V to 0.18 V for SiO2/3C-SiC and from 2.49 V to 0.04 V for HfO2/SiO2/3C-SiC samples. For 4H-SiC MOSCAPs, as-deposited devices exhibited high oxide charges and poor interface quality. The average flat-band voltages for SiO2/4H-SiC were 9.01 ± 0.15 V, while HfO2/SiO2 MOSCAPs showed 6.65 ± 0.02 V. After PDA at 1100°C, the flat-band voltage improved to-0.65 ± 0.035 V for SiO2/4H-SiC and-0.50 ± 0.05 V for HfO2/SiO2/4H-SiC. Additionally, hysteresis was reduced from 0.61 V to 0.15 V for SiO2/4H-SiC and from 0.23 V to 0.05 V for HfO2/SiO2/4H-SiC samples. We propose a figure of merit (FOM) which is defined as the ratio of the breakdown field to the product of flatband voltage shift, hysteresis effect, and density of interface states. The results demonstrate that PDA significantly enhances the interface quality and electrical characteristics of the MOS capacitors (MOSCAPs), with nitrogen (N2) PDA yielding higher FOM for 4H-SiC stacks and forming FG PDA showing superior interfacial quality for 3C-SiC stacks.
- Open Access
- 1 September 2025
- Published by The Electrochemical Society in Journal of the Electrochemical Society
- Vol. 172 (9) , 090505
Revealing How Silicon Oxide Accelerates Calendar Ageing of Commercial 21700 Nickel-Rich Lithium-Ion Cells
This study investigates the calendar ageing behaviour of NMC811//SiOx-graphite 21700 cylindrical cells (LGM 50), which were held at varying states of charge (SoC), for up to 70 weeks at 4 different temperatures. Throughout the ageing study, capacity and internal resistance were monitored, and significant capacity loss over time, with greater loss at high SoC and temperature, were observed. A combination of electrochemical testing and post-mortem characterisation techniques point to the anode, more specifically, the silicon-oxide particles, as the driver of capacity fade through unstable solid-electrolyte interface dynamics, leading to the gradual loss of lithium inventory. Despite the greatest capacity loss being at ∼80% SoC and the apparent improvement in capacity retention at higher SoCs, i.e. the “spoon-shape effect,” the degradation is most pronounced at 100% SoC, driven by the instability of the silicon-oxide SEI. This is demonstrated by post-calendar ageing cycling of the cells, where those aged at 100% SoC degraded at a faster rate than 80% SoC.
- 1 September 2025
- Published by The Electrochemical Society in Journal of the Electrochemical Society
- Vol. 172 (9) , 090505
Open AccessRevealing How Silicon Oxide Accelerates Calendar Ageing of Commercial 21700 Nickel-Rich Lithium-Ion Cells
This study investigates the calendar ageing behaviour of NMC811//SiOx-graphite 21700 cylindrical cells (LGM 50), which were held at varying states of charge (SoC), for up to 70 weeks at 4 different temperatures. Throughout the ageing study, capacity and internal resistance were monitored, and significant capacity loss over time, with greater loss at high SoC and temperature, were observed. A combination of electrochemical testing and post-mortem characterisation techniques point to the anode, more specifically, the silicon-oxide particles, as the driver of capacity fade through unstable solid-electrolyte interface dynamics, leading to the gradual loss of lithium inventory. Despite the greatest capacity loss being at ∼80% SoC and the apparent improvement in capacity retention at higher SoCs, i.e. the “spoon-shape effect,” the degradation is most pronounced at 100% SoC, driven by the instability of the silicon-oxide SEI. This is demonstrated by post-calendar ageing cycling of the cells, where those aged at 100% SoC degraded at a faster rate than 80% SoC.
- Open Access
- 21 May 2025
- Published by Royal Society of Chemistry (RSC) in Journal of Materials Chemistry A
- Vol. 13 (37) , 30967-30984
Assessing the role of morphological changes as the origin of improved cycling stability of Sn-based anodes for sodium-ion batteries
Sn based anodes for sodium-ion batteries are examined in relation to the morphological changes driven by the formation of a porous “coral-like” structure. We explore conditions that promote its formation and evaluate its impact on cycling stability.
- 21 May 2025
- Published by Royal Society of Chemistry (RSC) in Journal of Materials Chemistry A
- Vol. 13 (37) , 30967-30984
Open AccessAssessing the role of morphological changes as the origin of improved cycling stability of Sn-based anodes for sodium-ion batteries
Sn based anodes for sodium-ion batteries are examined in relation to the morphological changes driven by the formation of a porous “coral-like” structure. We explore conditions that promote its formation and evaluate its impact on cycling stability.
- Open Access
- 12 May 2025
- Published by American Chemical Society (ACS) in ChemRxiv
Contact loss in all solid-state Li-ion batteries via deposition of impurities
Solid-state batteries promise high energy storage with enhanced safety but suffer from contact loss at the lithium (Li) metal anode-solid electrolyte interface as Li is stripped into the ionically-conducting solid electrolyte. Contrary to the prevailing view that the contact loss arises from void formation in the Li metal at this interface, we demonstrate, in cells with garnet electrolytes, that it instead arises from the deposition of insulating impurities from within the electrode onto the interface. These impurities form a porous layer, and an imposed stack pressure is required for Li to creep through the pores of this layer. This proposed mechanism is supported by our experimental observations that no voids are present on the interface and by our finding that contact loss persists at stack pressures that are sufficiently high to collapse any voids in the Li. Theoretical models developed using the impurity deposition mechanism are in excellent agreement with measurements. This finding has significant implications for improving the design of all solid-state batteries including the development of anode-free cells for which impurities within the electrode are expected to be substantially reduced.
- 12 May 2025
- Published by American Chemical Society (ACS) in ChemRxiv
Open AccessContact loss in all solid-state Li-ion batteries via deposition of impurities
Solid-state batteries promise high energy storage with enhanced safety but suffer from contact loss at the lithium (Li) metal anode-solid electrolyte interface as Li is stripped into the ionically-conducting solid electrolyte. Contrary to the prevailing view that the contact loss arises from void formation in the Li metal at this interface, we demonstrate, in cells with garnet electrolytes, that it instead arises from the deposition of insulating impurities from within the electrode onto the interface. These impurities form a porous layer, and an imposed stack pressure is required for Li to creep through the pores of this layer. This proposed mechanism is supported by our experimental observations that no voids are present on the interface and by our finding that contact loss persists at stack pressures that are sufficiently high to collapse any voids in the Li. Theoretical models developed using the impurity deposition mechanism are in excellent agreement with measurements. This finding has significant implications for improving the design of all solid-state batteries including the development of anode-free cells for which impurities within the electrode are expected to be substantially reduced.
- Open Access
- 27 April 2025
- Published by American Chemical Society (ACS) in ChemRxiv
Revealing how silicon oxide accelerates calendar ageing of commercial 21700 nickel-rich lithium-ion cells
This study investigates the calendar ageing behaviour of NMC811//SiOx-graphite 21700 cylindrical cells (LGM50), which were held at varying states of charge (SoC), for up to 70 weeks at 4 different temperatures. Throughout the ageing study, capacity and internal resistance were monitored, and significant capacity loss over time, with greater loss at high SoC and temperature, were observed. A combination of electrochemical testing and post-mortem characterisation techniques point to the anode, more specifically, the silicon-oxide particles, as the driver of capacity fade through unstable solid-electrolyte interface dynamics, leading to the gradual loss of lithium inventory. Despite the greatest capacity loss being at ~80% SoC and the apparent improvement in capacity retention at higher SoCs, i.e. the “spoon-shape effect”, the degradation is most pronounced at 100% SoC, driven by the instability of the silicon-oxide SEI. This is demonstrated by post-calendar ageing cycling of the cells, where those aged at 100% SoC degraded at a faster rate than 80% SoC.
- 27 April 2025
- Published by American Chemical Society (ACS) in ChemRxiv
Open AccessRevealing how silicon oxide accelerates calendar ageing of commercial 21700 nickel-rich lithium-ion cells
This study investigates the calendar ageing behaviour of NMC811//SiOx-graphite 21700 cylindrical cells (LGM50), which were held at varying states of charge (SoC), for up to 70 weeks at 4 different temperatures. Throughout the ageing study, capacity and internal resistance were monitored, and significant capacity loss over time, with greater loss at high SoC and temperature, were observed. A combination of electrochemical testing and post-mortem characterisation techniques point to the anode, more specifically, the silicon-oxide particles, as the driver of capacity fade through unstable solid-electrolyte interface dynamics, leading to the gradual loss of lithium inventory. Despite the greatest capacity loss being at ~80% SoC and the apparent improvement in capacity retention at higher SoCs, i.e. the “spoon-shape effect”, the degradation is most pronounced at 100% SoC, driven by the instability of the silicon-oxide SEI. This is demonstrated by post-calendar ageing cycling of the cells, where those aged at 100% SoC degraded at a faster rate than 80% SoC.