EFEleni Fiamegkou

Eleni Fiamegkou

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Eleni Fiamegkou has a total of 60 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    How Surface Reconstruction Drives Heterogeneous Bulk Delithiation in Single-crystalline Ni-rich Layered Oxide Cathodes

    by Gaurav C. Pandey, Ashok S. Menon, Valeria Calani San Miguel, José J. Arroyo Gómez, Harry Gillions, Rebecca Sellers, Matthew J. W. Ogley, Eleni Fiamegkou, Satish Bolloju, Sahil Tippireddy, et al.

    The electrochemical performance of single-crystalline Ni-rich layered oxide cathodes is fundamentally limited by bulk Li⁺ diffusion within micrometre-sized particles. During high-voltage cycling—necessary for high-energy applications—intraparticle Li⁺ diffusion is further impeded by oxygen-loss-induced surface reconstruction from the layered phase to spinel/rock-salt structures. Therefore, to fully understand how bulk Li⁺ transport kinetics influences electrochemical degradation, it is necessary to establish the correlation between surface reconstruction and bulk delithiation during the anisotropic structural evolution (i.e., expansion of the layers followed by their contraction) of the cathode particles during long-term cycling. In this work, we accomplish this using multi-rate operando X-ray diffraction studies of single-crystalline Ni-rich layered oxide cathodes aged under different voltage windows in single-layer pouch full cells. We quantify how increased surface reconstruction leads to greater heterogeneity in bulk delithiation, thereby promoting phase separation and exacerbating electrochemical capacity fade. These results provide a direct mechanistic link between surface degradation and bulk delithiation in such cathodes and offer a framework for non-destructively probing kinetics-dependent degradation under practically relevant conditions to guide strategies for improved cycling stability.

  • Open Access

    Demonstrating the Dual Role of AlxOy Coatings on LiNiO2 Cathodes in Pouch Cells via Operando and Surface-Sensitive X-ray Techniques

    by Muhammad Ans, Eleni Fiamegkou, Ashok S. Menon, Gaurav C. Pandey, Galo J. Páez Fajardo, Harry Gillions, Paolo Melgari, Calum Clenahan, Satish Bolloju, Pardeep K. Thakur, et al.

    LiNiO2 (LNO) cathodes are regarded as promising materials for high-energy-density applications owing to their high practical capacity and competitive cost. However, over the course of cycling, they experience rapid capacity decay when cycled above 4.2 V (vs Li/Li+) through bulk and surface mediated instabilities. Surface engineering via ultrathin aluminium oxide (AlxOy) coatings has the potential to provide an effective approach to inhibit the surface degradation pathways in LNO, but their long-term benefits remain unclear. Further, it is not well understood whether AlxOy coatings can provide any surface-to-bulk stabilisation effects. Here, we employ an ultrathin and conformal film of AlxOy on polycrystalline LNO powder via a scalable powder atomic layer deposition (ALD) method. Electrochemical performance was evaluated in high-mass-loading pouch cells (LNO vs. graphite) in a voltage window of 3.0–4.1 V using a constant-current constant-voltage (CCCV) protocol. Cells containing the ALD-coated LNO cathodes demonstrated significantly improved capacity retention (91.2%) over 100 cycles at a C/3 rate. In-house operando X-ray diffraction data on pouch cells demonstrated that after aging, ALD-coated LNO showed less kinetically hindered delithiation as compared to the uncoated LNO, confirming a surface-to-bulk effect. Postmortem surface-sensitive spectroscopy showed both the HF scavenging role of the AlxOy coatings and suppression of dense surface reconstructions in coated LNO. These findings highlight the efficacy of our scalable surface engineering approach in mitigating interfacial degradation, reducing impedance growth and improving bulk delithiation kinetics, which enhances the long-term electrochemical performance of these ultra-Ni-rich cathode materials.

  • Open Access

    Advancing Battery Diagnostics through Operando Neutron Diffraction of Unmodified Non-deuterated Li-ion Single-layer Pouch Cells

    by Ashok S. Menon, Gabriel E. Pérez, Gaurav C. Pandey, Fabio Orlandi, Pascal Manuel, Tobias A. Bird, Daniel Jm Irving, Eleni Fiamegkou, Louis Fj Piper

    The advent of diverse battery chemistries necessitates the development of novel diagnostic techniques to investigate their degradation. Due to its sensitivity to light elements and ability to distinguish between 3d transition metals, operando neutron diffraction is well-suited to study the crystallographic transformations in battery materials and their associated degradation pathways. However, it is currently not used academically due to limited data quality and time resolution, and the lack of a cost-effective electrochemical cell that can be reproducibly fabricated at the laboratory scale with benchmarked performance. Here, using the high-resolution cold-neutron diffractometer, WISH, we demonstrate that neutron diffraction can be performed in operando on laboratory-scale 70-mAh single-layer pouch cells without any modification, deuteration or isotope enrichment, cycled under practically relevant conditions. This advances the battery diagnostics toolkit beyond X-ray techniques and permits continuous academic investigations of established, and next-generation technologies like lithium-metal, anode-free and lithium-sulphur batteries for further development.

  • Open Access

    Pilot-line LMFP anodefree pouch cells: a scalable, low cost, energy dense Lithium battery

    by Gerard Bree, Daniela Proprentner, Galo Paez-Fajardo, Veronika Majherova, Eleni Fiamegkou, Louis Piper

    The anodefree configuration of lithium batteries represents a low-cost, high energy density alternative to current generation chemistries, and coupling with Ni and Co-free LiMnxFe1-xPO4 (LMFP) cathodes further reinforces these advantages. In this work, we manufacture and evaluate this cell type in coin and pouch format, establishing key performance characteristics and optimised test protocols, while identifying outstanding challenges limiting cell lifetime. The anodefree LMFP coin cell provides a 35 % stack-level energy density advantage over a traditional full cell (with graphite anode) when using a 60:40 Mn:Fe LMFP variant, which improves to a 42 % advantage when Mn content was increased to 80 % (at the cost of more rapid capacity loss). Cycling over the potential range of 3.0 – 4.5 V maximises cell lifetime, while the dominant degradation mechanism is identified as irreversible Li loss associated with a disadvantageous evolution in plated Li morphology. Finally, anodefree battery manufacturing is scaled to large-area pouch format to demonstrate commercial viability and compatibility with current industrial processes.

  • Open Access

    Revealing how silicon oxide accelerates calendar ageing of commercial 21700 nickel-rich lithium-ion cells

    by Veronika Majherova, Eleni Fiamegkou, Puritut Nakhanivej, Gerard Bree, James Gott, Ashok S. Menon, Galo J. Paez Fajardo, Dhammika W. Widanalage, Alexander Dimitrijevic, Meltiani Belekoukia, et al.

    This study investigates the calendar ageing behaviour of NMC811//SiOx-graphite 21700 cylindrical cells (LGM50), which were held at varying states of charge (SoC), for up to 70 weeks at 4 different temperatures. Throughout the ageing study, capacity and internal resistance were monitored, and significant capacity loss over time, with greater loss at high SoC and temperature, were observed. A combination of electrochemical testing and post-mortem characterisation techniques point to the anode, more specifically, the silicon-oxide particles, as the driver of capacity fade through unstable solid-electrolyte interface dynamics, leading to the gradual loss of lithium inventory. Despite the greatest capacity loss being at ~80% SoC and the apparent improvement in capacity retention at higher SoCs, i.e. the “spoon-shape effect”, the degradation is most pronounced at 100% SoC, driven by the instability of the silicon-oxide SEI. This is demonstrated by post-calendar ageing cycling of the cells, where those aged at 100% SoC degraded at a faster rate than 80% SoC.

  • Open Access

    Operando X-ray and Postmortem Investigations of High-voltage Electrochemical Degradation in Single-crystalline-LiNiO2–Graphite Cells

    by Muhammad Ans, Gaurav C. Pandey, Innes McClelland, Naresh Gollapally, Harry Gillions, Beth J Johnston, Matthew J. W. Ogley, James A. Gott, Eleni Fiamegkou, Veronica Celorrio, et al.

    Single-crystalline LiNiO2 (SC-LNO), a high-energy-density Li-ion cathode material, suffers from poor long-term electrochemical performance when cycled above 4.2 V (vs. Li+/Li). In this study, we evaluate this degradation using SC-LNO–graphite pouch cells electrochemically aged within a stressful voltage window (2.5–4.4 V) using a constant-current constant-voltage (CC-CV) protocol. Notable capacity fade was observed after one hundred cycles at C/3 rate, in addition to an increase in the overall electrochemical cell impedance. Operando X-ray diffraction data revealed that, despite no significant long-range bulk structural changes, (de-)lithiation of the aged SC-LNO becomes kinetically hindered after 100 cycles. Aging-induced changes in the short-range structure and charge compensation were evaluated through a multi-model quantitative analysis of the operando X-ray absorption spectroscopy data. While the electrochemical aging did not result in particle cracking, soft X-ray absorption spectroscopy data revealed the reconstruction of the cathode surface to a dense rock salt-like layer after long-term cycling, which acts as a kinetic trap for Li+ diffusion. Therefore, even under stressful conditions, deleterious surface reconstruction is the dominant factor that increases cell impedance and reduces Li+ mobility, which leads to the capacity fade. Cathode surface engineering will therefore be key to improving the long-term electrochemical performance of SC-LNO cathodes.

  • Open Access

    Fast-charging lithium-ion battery protocols: LMFP pouch cells as a rate capability case study

    by Gerard Bree, Veronika Majherova, Eleni Fiamegkou, Sanghamitra Moharana, Louis F. J. Piper

    The reduction of battery charge times is a key challenge in the wider adoption of electric vehicles (EVs), encompassing material, cell and system design aspects. Rate capability testing, the charging and discharging of a cell at various C-rates, is the most common technique used to assess the performance of Li-ion batteries, and particularly new electrode materials/cell designs, at high cycling rates. Data generated from this technique is however extremely sensitive to selected cell format and testing protocols, and thus lack of standardisation prevents both robust conclusions and comparison between studies. Furthermore, the figures of merit of such studies are often ill-defined and out of step with commercial requirements. Herein, we utilise LiMn0.6Fe0.4PO4\\Graphite (LMFP\\Gr) coin (half & full) and pouch cells to demonstrate these sensitivities. Cell format, electrode coat weight, and the inclusion of a constant voltage step during charge, are shown to dramatically alter the capacity observed at high C-rate in otherwise identical cells, reinforcing the advantages of testing in real-world conditions and the need for consistency between test samples/studies. To resolve this, we propose a commercially meaningful and industrially relevant protocol to evaluate fast-charging capabilities of Li-ion batteries.

  • Open Access

    Quantifying Electrochemical Degradation in Single-crystalline LiNi0.8Mn0.1Co0.1O2–Graphite pouch cells through Operando X-ray and Post-mortem Investigations

    by Ashok S. Menon, Nickil Shah, James A. Gott, Eleni Fiamegkou, Matthew J. W. Ogley, Galo J. Paez Fajardo, Naoum Vaenas, Ieuan Ellis, Nishitha Ravichandran, Peter Cloetens, et al.

    Layered nickel-rich lithium transition metal oxides (LiNixMnyCo1−x−yO2; where x ≥ 0.8), with single-crystalline morphology, are promising future high-energy-density Li-ion battery cathodes due to their ability to mitigate particle-cracking-induced degradation. This is due to the absence of grain boundaries in these materials, which prevents the build-up of bulk crystallographic strain during electrochemical cycling. Compared to their polycrystalline counterparts, there is a need to study single-crystalline Ni-rich cathodes using operando X-ray methods in uncompromised machine-manufactured industry-like full cells to understand their bulk degradation mechanisms as a function of different electrochemical cycling protocols. This can help us identify factors to improve their long-term performance. Here, through in-house operando X-ray studies of pilot-line-built LiNi0.8Mn0.1Co0.1O2–Graphite A7 pouch cells, it is shown that their electrochemical capacity fade under harsh conditions (2.5–4.4 V and 40 °C for 100 cycles at C/3 rate) primarily stems from the high-voltage reconstruction of the cathode surface from a layered to a cubic (rock salt) phase that impedes Li+ kinetics and increases cell impedance. Post-mortem electron and X-ray microscopy show that these cathodes can withstand severe anisotropic structural changes and show no cracking when cycled under such conditions. Comparing these results to those from commercial Li-ion cells with surface-modified single-crystalline Ni-rich cathodes, it is identified that cathode surface passivation can mitigate this type of degradation and prolong cycle life. In addition to furthering our understanding of degradation in single-crystalline Ni-rich cathodes, this work also accentuates the need for practically relevant and reproducible fundamental investigations of Li-ion cells and presents a methodology for achieving this.

  • Open Access

    Synergistic degradation mechanism in single crystal Ni-rich NMC//graphite cells

    by Galo J. Páez Fajardo, Eleni Fiamegkou, James Gott, Heng Wang, Israel Temprano, Ieuan Seymour, Ashok Menon, Ifan E. L. Stephens, Muhammad Ans, Wesley Dose, et al.

    Oxygen loss at high voltages in Ni-rich NMC//graphite Li-ion batteries promotes degradation but increasing evidence from full cells has shown the depth of discharge choice can further accelerate aging i.e. synergistic degradation. In this letter, we employ cycling protocols of single crystal LiNi0.834Mn0.095Co0.071O2//graphite pouch cells to examine the origin of the synergistic degradation in terms of material degradation mechanisms. In regimes where oxygen loss is not promoted (V 4.3 V), the deeper depths of discharge lead to pronounced faster aging. Using a combination of post-mortem analysis and density functional theory we present a mechanistic description of evolution of the surface densification as a function of voltage and its impact on lithium-ion kinetics to explain the observed cycling results.