QLQing Lin

Qing Lin

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Qing Lin has a total of 55 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Hybrid 2T nMOS/pMOS Gain Cell Memory With Indium-Tin-Oxide and Carbon Nanotube MOSFETs for Counteracting Capacitive Coupling

    by Shuhan Liu, Shengman Li, Qing Lin, Koustav Jana, Subhasish Mitra, H.-S. Philip Wong, Kasidit Toprasertpong

    We demonstrate a back-end-of-line (BEOL) compatible 2T gain cell consisting of n-type indium-tin-oxide (ITO) MOSFET as a write transistor and p-type carbon nanotube (CNT) MOSFET as a read transistor. The opposite polarities help counteract the capacitive coupling in gain cells operating with voltage sensing: the drop of the storage node voltage due to the capacitive coupling with the write wordline (gate of a write nMOSFET) is fully recovered at the time of enabling the read wordline (source of a read pMOSFET) for readout. With the low leakage of an ITO nMOSFET and the opposite polarity of the read transistor, retention time of more than 500 s is achieved at zero-volt standby voltage. The results suggest that the hybrid combination of n-ITO and p-CNT is a promising approach to improve gain cell operation in terms of read margin, retention, and read speed for 3D integrated all-BEOL gain cell memory above the silicon FET logic layer.


  • Band-to-Band Tunneling Leakage Current Characterization and Projection in Carbon Nanotube Transistors

    by Qing Lin, Carlo Gilardi, Sheng-Kai Su, Zichen Zhang, Edward Chen, Prabhakar Bandaru, Andrew Kummel, Iuliana Radu, Subhasish Mitra, Greg Pitner, et al.

    Carbon nanotube (CNT) transistors demonstrate high mobility but also experience off-state leakage due to the small effective mass and band gap. The lower limit of off-current (IMIN) was measured in electrostatically doped CNT metal-oxide-semiconductor field-effect transistors (MOSFETs) across a range of band gaps (0.37 to 1.19 eV), supply voltages (0.5 to 0.7 V), and extension doping levels (0.2 to 0.8 carriers/nm). A nonequilibrium Green's function (NEGF) model confirms the dependence of IMIN on CNT band gap, supply voltage, and extension doping level. A leakage current design space across CNT band gap, supply voltage, and extension doping is projected based on the validated NEGF model for long-channel CNT MOSFETs to identify the appropriate device design choices. The optimal extension doping and CNT band gap design choice for a target off-current density are identified by including on-current projection in the leakage current design space. An extension doping level >0.5 carrier/nm is required for optimized on-current.


  • Electrically driven light emission from single quantum dots using pulsed MOS capacitors

    by Vivian Wang, Qing Lin, Ali Javey

    Robust, nanoscale light-emitting devices are attractive for emerging photonic and quantum engineering applications. However, conventional approaches suffer from fabrication challenges or lack the potential to address individual nanostructures, such as quantum dots. In this paper, we present a device that can produce electrically driven light emission from a single quantum dot using a single carbon nanotube as the charge injection contact. The device has a metal-oxide-semiconductor capacitor structure and operates based on an unconventional mechanism of electroluminescence, which relies on the use of bipolar voltage pulses. The proposed device can be fabricated in a simple manner using conventional lithographic processes, offering a scalable approach toward the development of optoelectronic devices at the single dot level.


  • Top Cited Papers

    Neuromorphic sensorimotor loop embodied by monolithically integrated, low-voltage, soft e-skin

    by Weichen Wang, Yuanwen Jiang, Donglai Zhong, Zhitao Zhang, Snehashis Choudhury, Jian-Cheng Lai, Huaxin Gong, Simiao Niu, Xuzhou Yan, Yu Zheng, et al.

    Artificial skin that simultaneously mimics sensory feedback and mechanical properties of natural skin holds substantial promise for next-generation robotic and medical devices. However, achieving such a biomimetic system that can seamlessly integrate with the human body remains a challenge. Through rational design and engineering of material properties, device structures, and system architectures, we realized a monolithic soft prosthetic electronic skin (e-skin). It is capable of multimodal perception, neuromorphic pulse-train signal generation, and closed-loop actuation. With a trilayer, high-permittivity elastomeric dielectric, we achieved a low subthreshold swing comparable to that of polycrystalline silicon transistors, a low operation voltage, low power consumption, and medium-scale circuit integration complexity for stretchable organic devices. Our e-skin mimics the biological sensorimotor loop, whereby a solid-state synaptic transistor elicits stronger actuation when a stimulus of increasing pressure is applied.


  • Bandgap Extraction at 10 K to Enable Leakage Control in Carbon Nanotube MOSFETs

    by Qing Lin, Gregory Pitner, Carlo Gilardi, Sheng-Kai Su, Zichen Zhang, Edward Chen, Prabhakar Bandaru, Andrew Kummel, Han Wang, Matthias Passlack, et al.

    Carbon nanotube (CNT) transistors exemplify the fundamental tradeoff between desirable high mobility and undesirable leakage current due to the small effective mass and bandgap. To understand leakage current limits in high-speed CNT transistors, electrical bandgaps are extracted on 12 single-CNT top-gate MOSFETs from the energy gap between thermionic emission and band-to-band tunneling (BTBT) at 10 K. At 300 K the minimum I OFF at 0.5 V V DS is analyzed as a function of bandgap between 0.96 eV and 0.43 eV with I OFF-MIN from 0.2 pA/CNT to 15 nA/CNT. NEGF simulation validates the bandgap extraction methodology and reproduces the experimental MOSFET I OFF-MIN data. A TCAD model calibrated to this work’s leakage data projects the accessible I ON -I OFF design space bounded by CNT bandgap, indicating E G > 0.65 eV (d CNT < 1.3 nm) is needed to achieve 100 nA/ $\mu \text{m}$ at 0.5 V V DD and 250 CNT/ $\mu \text{m}$ for channel length above 20 nm. An E G of 1.06 eV (d CNT = 0.8 nm) can deliver $2750\times $ tunable range of I OFF by adjusting V T , which exceeds the $400\times $ tunable range of I OFF used in Si CMOS platform technologies.


  • Measurement of Ferroelectric Properties of Nanometer Scaled Individual Metal/Hf0.5Zr0.5O2/Metal Capacitors

    by Fei Huang, Matthias Passlack, San Lin Liew, Zhouchangwan Yu, Qing Lin, Aein Babadi, Vincent D.-H. Hou, Paul C. McIntyre, S. Simon Wong

    Ferroelectric properties of individual TiN/Hf 0.5 Zr 0.5 O 2 /TiN capacitors have been measured for technologically relevant areas as small as 60 nm $\times70$ nm, using direct detection of ultralow charge. A crossbar architecture has been utilized to fabricate the ferroelectric capacitors. Switching polarization of $40.1 \mu \text{C}$ /cm $^{2} \ge \text{P}_{\text{sw}} \ge 16.7 \mu \text{C}$ /cm 2 and coercive field 1.4 MV/cm $\ge \text{E}_{c} \ge1.09$ MV/cm have been observed for sizes between $1.1 \mu \text{m}$ 2 and 4200 nm 2 without discernable trend as function of capacitor size in the present data set. Measured bipolar stress endurance exceeds the maximum measured cycles of 10 10 although some capacitors start to show signs of degradation after 10 9 cycles. A clear correlation between P sw degradation and increased leakage current is observed. The direct measurement of such small area capacitors has been enabled by equipment and circuit design innovations. The present setup allows direct measurement of ferroelectric properties for capacitors as small as 1900 nm 2 while further improvements could extend the size limit to 950 nm 2 where the design window appears to close.