YCYuan Chen

Yuan Chen

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Yuan Chen has a total of 33 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    Morphological Analysis and Intelligent Optimization of the Fusion Zone in Electrofusion Welding of PE Pipes

    by Tao Shen, Yuan Chen, Weiyu Liu, Jingtai Liu, Xiaogang Wang, Bingqing Wang, Yuntang Li

    Taking dn400 large-diameter PE electrofusion fittings as the research object, a theoretical model of electrofusion welding was established and experimental verification was completed. Based on this, the influence of welding parameters and wire feeding methods on the morphology of the fusion zone and welding performance was analyzed. A welding database was established using finite element simulation calculations and Latin hypercube sampling (LHS). Random forest (RF) was used to distinguish the fusion state under different welding parameters and wire feeding methods, and BP neural network (BPNN) was used to predict welding performance. The particle swarm (PSO) algorithm was used to optimize the morphology of the fusion zone and welding performance. The results showed: compared with uniform wire distribution, non-uniform wire distribution has a better effect on controlling and improving the morphology and performance indicators of the fusion zone. The RF classification model and BPNN both achieved an accuracy of over 96% in distinguishing the fusion state and predicting welding performance. The PSO optimization algorithm can significantly improve the morphology of the fusion zone, with all welding performance indicators improving by more than 8%.


  • Multi-Objective Structural Optimization of Hydraulically Controllable Reciprocating Seals With Comprehensive Static and Dynamic Performance

    by Xiaoxuan Li, Bingqing Wang, Yuntang Li, Xudong Peng, Yuan Chen, Xiaolu Li

    The hydraulically controllable reciprocating seal (HCRS) is a novel intelligent sealing technology capable of online performance regulation, making it one of the preferred solutions for highly reliable seals in the industrial field. However, the impact of structural parameters on the performance of it remains unclear, complicating efforts to provide precise guidance for structural design. To address these issues, this article first employs a mixed thermoelastohydrodynamic lubrication (TEHL) model to perform a parametric analysis of how structural parameters affect the static and dynamic performance of seals, identifying key influencing factors. Second, a multiobjective optimization model was established to derive the optimal structural design using a comprehensive balance method. Finally, the performance results before and after optimization were compared. The results indicate that the width of the slide ring, the air side angle of the slide ring, the inner diameter of the slide ring, and the length of the internal pressure cavity are critical factors influencing sealing performance. Following optimization, the maximum von Mises stress in the seal was reduced by 51.5%, net leakage decreased by 12.9%, and friction power loss reduced by 2.25%. This demonstrates that the optimization method is effective for designing seals with low leakage, low friction, and high reliability.


  • Transient Performance Study of Compliant Foil Cylindrical Gas Film Seal With Supercritical Carbon Dioxide

    by Yuan Chen, Aoxiang Jiang, Yuntang Li, Xiaolu Li, Bingqing Wang, Jinbo Jiang, Xudong Peng

    A novel transient solution model for compliant foil cylindrical gas film seal utilizing supercritical carbon dioxide as the medium, taking mass eccentricity into account, has been established under the influence of combined high-speed fluid effects. This study reveals the transient operating mechanism of the seal, investigates the impact of mass eccentricity on transient behavior, analyzes the anti-interference capability of the seal under external excitation, and further determines the structural optimal range. The results show that the seal displays robust anti-interference capabilities in the presence of mass eccentricity and external excitation. The application of unidirectional excitation leads to notable fluctuations in the vicinity of the peaks of eccentricity and mass leakage rates, thereby reducing stability. In contrast, bidirectional excitation has been observed to result in significant fluctuations in sealing performance, which ultimately leads to a degradation in the system's functionality. The optimal sealing stability is achieved when the flexibility coefficient ranges from 0.001 to 0.004 and the length-to-diameter ratio is between 2.0 and 2.5.


  • Open Access

    Investigation of the Effects of Hydrogen Addition on Explosion Characteristics and Pressure Fluctuations of Ethyl Acetate

    by Ce Liang, Xiaolu Li, Cangsu Xu, Francis Oppong, Yangan Bao, Yuan Chen, Yuntang Li, Bingqing Wang, Jiangqin Ge

    This study systematically explored the characteristics of explosion and pressure fluctuations of ethyl acetate (EA)/hydrogen (H2)/air mixtures under different initial pressures (1–3 bar), H2 fractions (4%, 8%, 12%), and equivalence ratios of EA (0.5–1.4). The flame images indicated that a higher pressure, a higher H2 fraction, and a higher equivalence ratio could cause flame instability. An analysis of the dimensionless growth rate indicated that the flame instability was impacted by both thermal diffusion and hydrodynamic effects. The results also indicated that a higher initial pressure or H2 fraction could accelerate the combustion reaction and increase the explosion pressure and deflagration index. The maximum values were observed at 21.841 bar and 184.153 bar·m/s. However, their effects on explosion duration and heat release characteristics differed between lean and rich mixtures. Additionally, this study examined pressure fluctuations in both the time and frequency domains. The findings indicated a strong correlation between pressure fluctuation and flame instability. Modifying the H2 fraction and equivalence ratio to enhance flame stability proved effective in reducing pressure fluctuation amplitude. This study offers guidance for evaluating explosion risks associated with EA/H2/air mixtures and for designing related combustion devices.


  • Thermal-Gas-Elastic Coupling Modeling and Performance Analysis of Foil Cylindrical gas Film Seal Considering Speed Slip, Temperature Jump and Shaft Misalignment

    by Long Chen, Yuan Chen, Yuntang Li, Xudong Peng, Xiaolu Li, Dan Wang, Bingqing Wang

    The Compliant foil cylindrical gas film seal is an advanced sealing technology designed for high-speed and high-temperature conditions in a jet engine. Its design involves using a compliant foil to create a cylindrical sealing surface, achieving adaptive sealing in environments with high pressure differences and rotational speeds. For high-speed and high-temperature operation, a speed slip flow model was established by considering film slip flow, wall temperature jump, foil deformation, and gas viscosity-temperature thermal effects. The variations in the lubrication performance of the foil cylindrical gas film seal with changes in shaft misalignment directions, misalignment angles, and operating parameters were investigated. The speed slip leads to a decrease in gas film lift and an increase in leakage. The wall temperature jump phenomenon caused by speed slip leads to a 2.56% decrease in film temperature. The shaft misalignment angles on the high-pressure and low-pressure sides have different impacts on the flow field, with film pressure and temperature differing by 66.78% and 11.19%, respectively.


  • Leakage Control Mechanisms and Strategies for Hydraulically Driven Controllable Rod Seals

    by Bingqing Wang, Xiaoxuan Li, Yuntang Li, Xudong Peng, Yuan Chen, Xiaolu Li

    The primary function of rod seals in hydraulic systems is to prevent the leakage of the hydraulic medium, which would otherwise result in environmental pollution and the loss of energy. However, the leakage control performance of conventional rod seals is limited by the level of product design. As a result, the performance of these seals will gradually degrade during the service process. Furthermore, it is not possible to adaptively adjust the performance of these seals in response to changes in operating conditions. Hydraulically controllable rod seals (HCRS) can be driven hydraulically to adjust the internal stress distribution of the seal to regulate the sealing performance. This may be an effective solution, although the leakage control mechanism and strategy remain unclear. This paper employs a thermoelastohydrodynamic mixed lubrication model to comparatively analyze the behaviors and performances of the HCRS with or without a cavity structure. The leakage control mechanism of the HCRS is revealed, namely that it is achieved by increasing the interface contact pressure and reducing the fluid film thickness through external pressurization. Furthermore, the functional relationship between the sealing performance and the regulating variables under different operating conditions is obtained through multivariate regression analysis, thereby forming the quantitative leakage control strategy of the HCRS.


  • Thermoelastohydrodynamic Mixed Lubrication of Combined Rod Seals Operating at High Pressures and Speeds: Mathematical Modeling and Numerical Analysis

    by Bingqing Wang, Xiaoxuan Li, Xudong Peng, Yuntang Li, Yuan Chen, Jie Jin

    Thermoelastohydrodynamic (TEHD) mixed lubrication characteristics of a step-combined rod seal under high-pressure and high-speed conditions are analyzed in this article. A novel TEHD mixed lubrication model for combined rod seals is innovatively established from the perspective of “seal-film-rod” system for the first time. Parameterized studies are conducted to evaluate the thermal effect on seal behavior with the comparison of isothermal elastohydrodynamic (EHD) lubrication analysis. Numerical results show that the interface friction heat is quite remarkable and mainly concentrated on the sealing lip, especially in high pressure and speed cases. With the increasing sealed pressure or rod speed, the temperature rise becomes more obvious and has a more significant impact on the sealing performance. The excessively rising temperature will even exceed the melting point of the sealing material, causing thermal damage.


  • Open Access

    Influence of Nitrile Butadiene Rubber (NBR) Shore Hardness and Polytetrafluoroethylene (PTFE) Elastic Modulus on the Sealing Characteristics of Step Rod Seals

    by Bingqing Wang, Xiaoxuan Li, Xudong Peng, Yuntang Li, Xiang Li, Yuan Chen, Jie Jin

    The influence of NBR Shore hardness and PTFE elastic modulus on the sealing characteristics of step rod seals is analyzed in this paper based on the developed mixed elastohydrodynamic lubrication (EHL) model. The optimized selection studies of NBR Shore hardness and PTFE elastic modulus under different operating conditions are carried out based on the principle of minimizing net leakage and friction power loss. Results show that the Shore hardness of the NBR O-ring and, in particular, the elastic modulus of the PTFE ring has a significant effect on the sealing characteristics. Although the high values of these parameters result in high friction forces, they are beneficial for leakage control. To achieve both low leakage and low friction, it is recommended that high hardness and low modulus are selected for moderate-low pressure or high speed conditions, but low hardness and high modulus are selected for high pressure or low speed conditions.


  • Open Access

    Dynamic performance analysis and parameter collaborative optimization of floating seal dam compliant foil face gas seal

    by Yuan Chen, Cong Xiong, Yuntang Li, Xiang Li, Xiaofeng Xue, Bingqing Wang, Yuan Gan

    Under the consideration of axial displacement excitation, the floating seal dam compliant foil face gas seal (FSD-CFFGS) is taken as the research object. based on the theory of gas lubrication and elastic mechanics, the seal dynamics equation, transient Reynolds equation and foil deformation equation are solved by coupling method. The dynamic performance difference between FSD-CFFGS and rigid surface face gas seal (RSFGS) is compared and analyzed, Besides, parameter optimization is carried out to improve dynamic stability and leakage control performance. The results show that the dynamic performance of the FSD-CFFGS is significantly improved compared with the RSFGS. The dynamic performance of FSD-CFFGS can be effectively improved by reasonably configuring the structural or mechanical parameters such as the supporting foil compliance coefficient, spring stiffness, auxiliary seal ring damping, and the flexibly mounted stator’s mass.