XTXinming Tang

Xinming Tang

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Xinming Tang has a total of 30 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    A Study on the Identification of Geohazards in Henan Province Based on the Basic Deformation Products of LuTan-1

    by Jing Lu, Xinming Tang, Tao Li, Lei Wei, Lingfei Guo, Xiang Zhang, Xuefei Zhang

    Henan Province, characterized by hills and mountains in its western, northern, and southern regions, is a high-risk area for geohazards in China. In this paper, we are the first to investigate the geohazards over Henan using the basic deformation products of LuTan-1, and we provide the minimum detectable deformation gradients of the products. The basic products consist of deformation field products generated by differential interferometric synthetic aperture radar (InSAR, DInSAR) and time-series deformation products derived from multi-temporal InSAR (MT-InSAR). They were produced using the acquisitions from June 2023 to February 2025. We identified 1620 potential geohazards, including 1340 landslides located in western and southern Henan, 139 ground collapses due to underground mining concentrated in the coal-rich central and eastern regions, and 141 cases of ground deformation located mainly in the agricultural areas of central and northern Henan. DInSAR detected 1470 hazards, while MT-InSAR found 150 more. By calculating the deformation between adjacent pixels, we found that the minimum detectable deformation gradients of the 150 geohazards were less than 0.061 mm/m, which is not detectable by DInSAR. The deformation gradients were greater than 0.017 mm/m and were discovered by MT-InSAR. The overall distribution exhibits a certain pattern, offering a basis for geohazard monitoring.

  • Open Access

    Updating Active Deformation Inventory Maps in Mining Areas by Integrating InSAR and LiDAR Datasets

    by Liuru Hu, Roberto Tomás, Xinming Tang, Juan López Vinielles, Gerardo Herrera, Tao Li, Zhiwei Liu

    Slope failures, subsidence, earthworks, consolidation of waste dumps, and erosion are typical active deformation processes that pose a significant hazard in current and abandoned mining areas, given their considerable potential to produce damage and affect the population at large. This work proves the potential of exploiting space-borne InSAR and airborne LiDAR techniques, combined with data inferred through a simple slope stability geotechnical model, to obtain and update inventory maps of active deformations in mining areas. The proposed approach is illustrated by analyzing the region of Sierra de Cartagena-La Union (Murcia), a mountainous mining area in southeast Spain. Firstly, we processed Sentinel-1 InSAR imagery acquired both in ascending and descending orbits covering the period from October 2016 to November 2021. The obtained ascending and descending deformation velocities were then separately post-processed to semi-automatically generate two active deformation areas (ADA) maps by using ADATool. Subsequently, the PS-InSAR LOS displacements of the ascending and descending tracks were decomposed into vertical and east-west components. Complementarily, open-access, and non-customized LiDAR point clouds were used to analyze surface changes and movements. Furthermore, a slope stability safety factor (SF) map was obtained over the study area adopting a simple infinite slope stability model. Finally, the InSAR-derived maps, the LiDAR-derived map, and the SF map were integrated to update a previously published landslides’ inventory map and to perform a preliminary classification of the different active deformation areas with the support of optical images and a geological map. Complementarily, a level of activity index is defined to state the reliability of the detected ADA. A total of 28, 19, 5, and 12 ADAs were identified through ascending, descending, horizontal, and vertical InSAR datasets, respectively, and 58 ADAs from the LiDAR change detection map. The subsequent preliminary classification of the ADA enabled the identification of eight areas of consolidation of waste dumps, 11 zones in which earthworks were performed, three areas affected by erosion processes, 17 landslides, two mining subsidence zone, seven areas affected by compound processes, and 23 possible false positive ADAs. The results highlight the effectiveness of these two remote sensing techniques (i.e., InSAR and LiDAR) in conjunction with simple geotechnical models and with the support of orthophotos and geological information to update inventory maps of active deformation areas in mining zones.


  • Open Access

    Satellite Laser Altimetry Data-Supported High-Accuracy Mapping of GF-7 Stereo Images

    by Changru Liu, Ximin Cui, Li Guo, Ling Wu, Xinming Tang, Shuhan Liu, Debao Yuan, Xia Wang

    GaoFen 7 (GF-7) is China’s first submeter high-resolution stereo mapping satellite with dual-linear-array cameras and a laser altimeter system onboard for high-precision mapping. To further take advantage of the very high elevation accuracy of laser altimetry data and the high relative accuracy with stereo images, an innovative combined adjustment method for GF-7 stereo images with laser altimetry data is presented in this paper. In this method, two flexible and effective schemes were proposed to extract the elevation control point according to the registration of footprint images and stereo images and then utilized as vertical control in the block adjustment to improve the elevation accuracy without ground control points (GCPs). The validation experiments were conducted in Shandong, China, with different terrains. The results demonstrated that, after using the laser altimetry data, the root mean square error (RMSE) of elevation was dramatically improved from the original 2.15 m to 0.75 m, while the maximum elevation error was less than 1.6 m. Moreover, by integrating a few horizontal control points, the planar and elevation accuracy can be simultaneously improved. The results show that the method will be useful for reducing the need for field survey work and improving mapping efficiency.


  • Open Access

    Registration and Combined Adjustment for the Laser Altimetry Data and High-Resolution Optical Stereo Images of the GF-7 Satellite

    by Jiyi Chen, Xinming Tang, Yucai Xue, Guoyuan Li, Xiaoqing Zhou, Liuru Hu, Shuaitai Zhang

    The GF-7 satellite is China’s first civil sub-meter resolution stereo mapping satellite, aiming at 1:10,000-scale mapping. To achieve this goal, apart from the stereo optical cameras that reach sub-meter resolution, the GF-7 satellite is equipped with a laser altimetry system capable of obtaining three-dimensional laser points (LPs) with high elevation accuracy. However, the combination of laser altimetry data and optical stereo images has not been thoroughly studied. In this paper, we exploit the images recorded by the highly integrated laser footprint cameras and propose a hierarchical phase correlation method based on a geographic pyramid for the registration of laser altimetry data and high-resolution optical stereo images, which lays a solid foundation for the following combined adjustment. Experiments show that the proposed registration method can automatically locate the LPs on high-resolution stereo images and meet the requirements of bundle adjustment. A series of bundle adjustment experiments were carried out, showing that laser altimetry data can significantly enhance the vertical accuracy of optical image stereo mapping and that elevation accuracy can reach roughly 1.0 m (RSME) without ground control points. Therefore, this study could be a good guide for global high-precision DSM acquisition with the GF-7 satellite.


  • Open Access

    On-Orbit Geometric Calibration and Accuracy Validation for Laser Footprint Cameras of GF-7 Satellite

    by Jiyi Chen, Bin Zhang, Xinming Tang, Guoyuan Li, Xiaoqing Zhou, Liuru Hu, Xianhui Dou

    The Gaofen-7 (GF-7) satellite uses a two-beam laser altimetry system in which each beam is equipped with a laser footprint camera (LFC) to provide geometric processing of the laser footprint images that assist in optical image stereo mapping. Because of the violent vibrations during launch and the difference in the environment before and after entering orbit, the key parameters for geometric processing of the laser footprint images may change, which will cause large geolocation errors. Therefore, it is essential to carry out on-orbit calibration and validation for the laser footprint cameras. This study first constructs a rigorous geometric positioning model for the LFC of the GF-7 satellite and analyses various error sources that affect the geometric positioning accuracy of laser footprint images. Then, a comprehensive calibration method, which effectively eliminates the distortion of the LFC optical system, and the positioning error caused by the long-period jitter of the satellite platform, is proposed based on the multi-scene images combined with image simulation. The proposed method can effectively eliminate various errors that affect the geometric positioning accuracy of the GF-7 laser footprint image. The internal geometric positioning accuracy of the calibrated LFC is better than 0.7 pixels, and the absolute geometric positioning accuracy is within 6.0 m after using precise post-processing orbital and attitude data. Our study will contribute to the processing and application of laser altimetry data from the GF-7 satellite.


  • Open Access

    On-Orbit Absolute Radiometric Calibration and Validation of ZY3-02 Satellite Multispectral Sensor

    by Hongzhao Tang, Junfeng Xie, Xinming Tang, Wei Chen, Qi Li

    This study described the on-orbit vicarious radiometric calibration of Chinese civilian high-resolution stereo mapping satellite ZY3-02 multispectral imager (MUX). The calibration was based on gray-scale permanent artificial targets, and multiple radiometric calibration tarpaulins (tarps) using a reflectance-based approach between July and September 2016 at Baotou calibration site in China was described. The calibration results reveal a good linear relationship between DN and TOA radiances of ZY3-02 MUX. The uncertainty of this radiometric calibration was 4.33%, indicating that radiometric coefficients of ZY3-02 MUX are reliable. A detailed discussion on the validation analysis of the comparison results between the different radiometric calibration coefficients is presented in this paper. To further validate the reliability of the three coefficients, the calibrated ZY3-02 MUX was compared with Landsat-8 Operational Land Imager (OLI). The results also indicate that radiometric characteristics of ZY3-02 MUX imagery are reliable and highly accurate for quantitative applications.


  • Open Access

    On-Orbit Radiometric Performance of GF-7 Satellite Multispectral Imagery

    by Hongzhao Tang, Junfeng Xie, Xinming Tang, Wei Chen, Qi Li

    China’s first civilian, sub-meter, high-resolution stereo mapping satellite, GF-7, launched on 3 November 2019. Radiometric characterization of GF-7 multispectral imagery has been performed in this study. A relative radiometric accuracy evaluation of the GF-7 multispectral imagery was performed using several large uniform scenes, and the results showed that the accuracy is better than 2%. The absolute radiometric evaluation of the GF-7 satellite sensor was conducted at the Baotou and Dunhuang calibration sites, using the reflectance-based vicarious approach. The synchronous measurements of surface reflectance and atmospheric parameters were collected as the input for the radiative transfer model. The official radiometrically calibrated coefficient of the GF-7 multispectral imagery was evaluated with the predicted top-of-atmosphere (TOA) radiance from the radiative transfer model. The results indicated that the absolute radiometric accuracy of GF-7 multispectral imagery is better than 5%. In order to monitor the radiometric stability of the GF-7 satellite multispectral sensor, a relative and absolute radiometric accuracy assessment campaign should be performed several times a year.