Shinsuke Nakashima
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Shinsuke Nakashima has a total of 56 co-authors. Here are the top co-authors by number of shared publications:
- Atsushi Yamashita
The University of Tokyo
7 shared publications - Qi An
The University of Tokyo
6 shared publications - Terumasa Yamada
Department of Gastroenterological Surgery, Higashiosaka City Medical Center, Higashiosaka, Japan
6 shared publications - Jin Matsuyama
Department of Gastroenterological Surgery, Higashiosaka City Medical Center, Higashiosaka, Japan
5 shared publications Masakazu Ikenaga
Department of Gastroenterological Surgery, Higashiosaka City Medical Center
5 shared publicationsMasami Ueda
Department of Gastroenterological Surgery, Higashiosaka City Medical Center
5 shared publications
Latest Publications
- Open Access
- 22 October 2026
- Published by IOP Publishing in Bioinspiration & Biomimetics
- Vol. 21 (5) , 056031
Bio-inspired open ligamentous knee joint with extended pitch and yaw range of motion
This study presents a bio-inspired open knee joint for biofidelic robots with an anatomically correct range of motion. Bio-inspired joints contribute to robot performance and understanding living organisms by providing dynamic motion data as the real-world physical twin. The proposed joint structure features the integration of the open joint and ligamentous constraint. In particular, the spherical envelope of the condyles contributes to the rotation other than pitch rotation. By applying a bio-inspired ligament arrangement, the developed knee joint performed pitch and yaw motion. The relationship between the ligament length and joint orientation was derived by forward kinematics and the ligament wrapping. The arrangement of the bio-inspired collateral ligaments was determined with the iterative calculation method considering the object wrapping, which predicted the yaw range of motion. Verification of the proposed approach includes the evaluation of the range of motion on the robotic knee joint equipped with the motor-driven tendons. The robot validation tests include the rotational motions around the pitch and yaw axes. The tests showed that the proposed joint structure can be a relevant approach for replicating the range of motion of a human knee joint. Future work includes the motion control of the joint system and integration into a real robot.
- 22 October 2026
- Published by IOP Publishing in Bioinspiration & Biomimetics
- Vol. 21 (5) , 056031
Open AccessBio-inspired open ligamentous knee joint with extended pitch and yaw range of motion
This study presents a bio-inspired open knee joint for biofidelic robots with an anatomically correct range of motion. Bio-inspired joints contribute to robot performance and understanding living organisms by providing dynamic motion data as the real-world physical twin. The proposed joint structure features the integration of the open joint and ligamentous constraint. In particular, the spherical envelope of the condyles contributes to the rotation other than pitch rotation. By applying a bio-inspired ligament arrangement, the developed knee joint performed pitch and yaw motion. The relationship between the ligament length and joint orientation was derived by forward kinematics and the ligament wrapping. The arrangement of the bio-inspired collateral ligaments was determined with the iterative calculation method considering the object wrapping, which predicted the yaw range of motion. Verification of the proposed approach includes the evaluation of the range of motion on the robotic knee joint equipped with the motor-driven tendons. The robot validation tests include the rotational motions around the pitch and yaw axes. The tests showed that the proposed joint structure can be a relevant approach for replicating the range of motion of a human knee joint. Future work includes the motion control of the joint system and integration into a real robot.
- Open Access
- 7 October 2026
- Published by IOP Publishing in Bioinspiration & Biomimetics
- Vol. 21 (5) , 056013
Dislocation analysis on bio-inspired open hip joint with active-and-passive stabilizers
This study presents a simulator framework to replicate joint dislocation that can be used to evaluate the contributions of various joint stabilizers. Compared to conventional axial joint configurations, biologically inspired open joints allow for a large range of motion with fewer rotational components and no singularities. Despite these advantages, open joints have few practical applications due to joint dislocation. To facilitate the development of bio-inspired open joints, our study evaluates the performance of biomimetic joint stabilizers involving (1) the muscle actuators as the active stabilizer, and (2) the skeletal socket and the ligaments as the passive stabilizers. Those stabilizers exert appropriate constraint forces during joint motion to prevent dislocation. The convex decomposition of the skeletal socket enabled the simulation of the dislocation behavior. The kinematic simulation determines the ligaments’ maximum length depending on the desired joint motion. The designed ligaments were suggested to prevent excessive dislocation in the simulation even when the motor output was off. The comparative simulation analysis also indicated that socket depth, active stabilizer, and passive stabilizer had different contributions for dislocation prevention and recovery. Future work includes the experimental verification of the proposed open hip joint architecture.
- 7 October 2026
- Published by IOP Publishing in Bioinspiration & Biomimetics
- Vol. 21 (5) , 056013
Open AccessDislocation analysis on bio-inspired open hip joint with active-and-passive stabilizers
This study presents a simulator framework to replicate joint dislocation that can be used to evaluate the contributions of various joint stabilizers. Compared to conventional axial joint configurations, biologically inspired open joints allow for a large range of motion with fewer rotational components and no singularities. Despite these advantages, open joints have few practical applications due to joint dislocation. To facilitate the development of bio-inspired open joints, our study evaluates the performance of biomimetic joint stabilizers involving (1) the muscle actuators as the active stabilizer, and (2) the skeletal socket and the ligaments as the passive stabilizers. Those stabilizers exert appropriate constraint forces during joint motion to prevent dislocation. The convex decomposition of the skeletal socket enabled the simulation of the dislocation behavior. The kinematic simulation determines the ligaments’ maximum length depending on the desired joint motion. The designed ligaments were suggested to prevent excessive dislocation in the simulation even when the motor output was off. The comparative simulation analysis also indicated that socket depth, active stabilizer, and passive stabilizer had different contributions for dislocation prevention and recovery. Future work includes the experimental verification of the proposed open hip joint architecture.
- 2 September 2026
- Published by Springer Nature
- p. 359-370
Estimation of Radiation Source Distribution in High-Dose 3D Space Using Nondirectional Detector with Attenuation by Lightweight Shield
- 2 September 2026
- Published by Springer Nature
- p. 359-370
Estimation of Radiation Source Distribution in High-Dose 3D Space Using Nondirectional Detector with Attenuation by Lightweight Shield
- 25 November 2025
- Published by Springer Nature
- p. 125-136
Bio-Inspired Open Knee Joint with Ligamentous Constraints and Antagonistic Actuation
- 25 November 2025
- Published by Springer Nature
- p. 125-136
Bio-Inspired Open Knee Joint with Ligamentous Constraints and Antagonistic Actuation
- Open Access
- 22 July 2025
- Published by Wiley in Advanced Intelligent Systems
- Vol. 7 (7)
Liquid Metal Sloshing for High‐Load Active Self‐Healing System: An Application to Tendon‐Driven Legged Robot
- 22 July 2025
- Published by Wiley in Advanced Intelligent Systems
- Vol. 7 (7)
Open AccessLiquid Metal Sloshing for High‐Load Active Self‐Healing System: An Application to Tendon‐Driven Legged Robot
- Open Access
- 5 July 2025
- Published by Fuji Technology Press Ltd. in International Journal of Automation Technology
- Vol. 19 (4) , 554-565
Automatic Viewpoint Selection for Teleoperation Assistance in Unmanned Environments Using Rail-Mounted Observation Robots
In irradiated environments that are inaccessible to human workers, operations are often conducted via teleoperation. Consequently, robot operators must maintain continuous situational awareness of a previously unknown working environment. Visual information regarding task targets and robot manipulators is of utmost importance. The proposed method employs rail-mounted observation robots to position easily replaceable cameras capable of long-term deployment in such environments. To reduce the cognitive load on teleoperators, the automatic viewpoint selection system eliminates the need for direct control of observation robots. This research presents a method for using a single rail-mounted observation robot to gather information on an unknown environment and automatically determine an optimal viewpoint. A key contribution of this study is the viewpoint presentation system, which can adapt to occlusions caused by robots and adjust its positions accordingly. The proposed method was validated through computer simulation using a hybrid model consisting of a static environment and a dynamic robot arm, which moves within the environment and may obstruct views. Furthermore, the feasibility of the approach was demonstrated in a real-world experiment involving a robot arm performing a teleoperation task.
- 5 July 2025
- Published by Fuji Technology Press Ltd. in International Journal of Automation Technology
- Vol. 19 (4) , 554-565
Open AccessAutomatic Viewpoint Selection for Teleoperation Assistance in Unmanned Environments Using Rail-Mounted Observation Robots
In irradiated environments that are inaccessible to human workers, operations are often conducted via teleoperation. Consequently, robot operators must maintain continuous situational awareness of a previously unknown working environment. Visual information regarding task targets and robot manipulators is of utmost importance. The proposed method employs rail-mounted observation robots to position easily replaceable cameras capable of long-term deployment in such environments. To reduce the cognitive load on teleoperators, the automatic viewpoint selection system eliminates the need for direct control of observation robots. This research presents a method for using a single rail-mounted observation robot to gather information on an unknown environment and automatically determine an optimal viewpoint. A key contribution of this study is the viewpoint presentation system, which can adapt to occlusions caused by robots and adjust its positions accordingly. The proposed method was validated through computer simulation using a hybrid model consisting of a static environment and a dynamic robot arm, which moves within the environment and may obstruct views. Furthermore, the feasibility of the approach was demonstrated in a real-world experiment involving a robot arm performing a teleoperation task.
- Open Access
- 6 May 2025
- Published by Wiley in Advanced Intelligent Systems
- Vol. 7 (7)
Liquid Metal Sloshing for High‐Load Active Self‐Healing System: An Application to Tendon‐Driven Legged Robot
Self‐healing is a promising approach for damage management in high‐load robot applications, such as legged robots. It is becoming a major function in soft robotics; however, its application to support heavyweight is relatively niche. Although previous studies has developed several self‐healing tensile modules for tendon‐driven robots, these modules suffered from deficient healing strength because of the formation of surface oxides. This study proposes a biomimetic approach to enhance self‐healing performance. This approach exploits the motion of the robot to trigger the sloshing of liquid metal, which decomposes surface oxide. The method is validated using a benchtop module test, resulting in a healed strength of over tens of kilograms. Moreover, the module enables the tendon‐driven monopod testbed to perform a squat motion 13 times after a landing impact fracture and self‐healing sequence. The self‐healing module does not break during or after the squatting motion. To the best of our knowledge, this is the first demonstration of active self‐healing behavior using a life‐sized legged robot. Thus, this study provides a novel approach in the field of self‐healing robotics for improving self‐healing, thus contributing to medical robot and mechatronic designs, including rehabilitation, surgical, and diagnostic robots.
- 6 May 2025
- Published by Wiley in Advanced Intelligent Systems
- Vol. 7 (7)
Open AccessLiquid Metal Sloshing for High‐Load Active Self‐Healing System: An Application to Tendon‐Driven Legged Robot
Self‐healing is a promising approach for damage management in high‐load robot applications, such as legged robots. It is becoming a major function in soft robotics; however, its application to support heavyweight is relatively niche. Although previous studies has developed several self‐healing tensile modules for tendon‐driven robots, these modules suffered from deficient healing strength because of the formation of surface oxides. This study proposes a biomimetic approach to enhance self‐healing performance. This approach exploits the motion of the robot to trigger the sloshing of liquid metal, which decomposes surface oxide. The method is validated using a benchtop module test, resulting in a healed strength of over tens of kilograms. Moreover, the module enables the tendon‐driven monopod testbed to perform a squat motion 13 times after a landing impact fracture and self‐healing sequence. The self‐healing module does not break during or after the squatting motion. To the best of our knowledge, this is the first demonstration of active self‐healing behavior using a life‐sized legged robot. Thus, this study provides a novel approach in the field of self‐healing robotics for improving self‐healing, thus contributing to medical robot and mechatronic designs, including rehabilitation, surgical, and diagnostic robots.
- Open Access
- 5 May 2025
- Published by Fuji Technology Press Ltd. in International Journal of Automation Technology
- Vol. 19 (3) , 280-289
Generation of Reaching Motions for Flat Cable Insertion Task Using Simulation Learning and Domain Adaptation for Industrial Robots
In this paper, we propose a method for generating reaching motions for the insertion of flat cables. Despite the need to insert flat cables into sockets in the circuit assembly of various electronic devices, there has been little research on automating the insertion flat cables that are already fixed on one side to the circuit board. In this regard, we focus on the generation of reaching motions in the posture for grasping such flat cables. Our method uses deep reinforcement learning in a simulation environment, and the features extracted from the image and the pose of the manipulator are used as states. For the transfer from the simulation environment to the real-world environment, we use a CycleGAN-based domain adaptation method. We conducted experiments under several different conditions in a real-world environment to verify operation of the trained agent. The results demonstrated that the success rate of the generated reaching motions exceeded 70% under all conditions.
- 5 May 2025
- Published by Fuji Technology Press Ltd. in International Journal of Automation Technology
- Vol. 19 (3) , 280-289
Open AccessGeneration of Reaching Motions for Flat Cable Insertion Task Using Simulation Learning and Domain Adaptation for Industrial Robots
In this paper, we propose a method for generating reaching motions for the insertion of flat cables. Despite the need to insert flat cables into sockets in the circuit assembly of various electronic devices, there has been little research on automating the insertion flat cables that are already fixed on one side to the circuit board. In this regard, we focus on the generation of reaching motions in the posture for grasping such flat cables. Our method uses deep reinforcement learning in a simulation environment, and the features extracted from the image and the pose of the manipulator are used as states. For the transfer from the simulation environment to the real-world environment, we use a CycleGAN-based domain adaptation method. We conducted experiments under several different conditions in a real-world environment to verify operation of the trained agent. The results demonstrated that the success rate of the generated reaching motions exceeded 70% under all conditions.
- Open Access
- 26 October 2023
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Access
- Vol. 11, 119647-119658
Viewpoint Selection for the Efficient Teleoperation of a Robot Arm Using Reinforcement Learning
In this study, we developed a novel method to determine the optimal viewpoint from which an operator could realize faster and more accurate robot teleoperation using reinforcement learning. The reinforcement learning model was trained using images obtained from several candidate viewpoints from scratch, and the viewpoint at which the model achieved the highest rewards was considered the optimal viewpoint. The experimental results validated the choice of the world model as the reinforcement learning model. Moreover, subject experiments wherein subjects operated a robot arm remotely to reach the target position were conducted. The experiments produced results that strongly aligned with the performance obtained through computer simulations, indicating that the proposed method is capable of selecting the optimal viewpoint without handcrafted design and subject experiments.
- 26 October 2023
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Access
- Vol. 11, 119647-119658
Open AccessViewpoint Selection for the Efficient Teleoperation of a Robot Arm Using Reinforcement Learning
In this study, we developed a novel method to determine the optimal viewpoint from which an operator could realize faster and more accurate robot teleoperation using reinforcement learning. The reinforcement learning model was trained using images obtained from several candidate viewpoints from scratch, and the viewpoint at which the model achieved the highest rewards was considered the optimal viewpoint. The experimental results validated the choice of the world model as the reinforcement learning model. Moreover, subject experiments wherein subjects operated a robot arm remotely to reach the target position were conducted. The experiments produced results that strongly aligned with the performance obtained through computer simulations, indicating that the proposed method is capable of selecting the optimal viewpoint without handcrafted design and subject experiments.
- Open Access
- 22 July 2022
- Published by Wolters Kluwer Health in Medicine
- Vol. 101 (29) , e29532
Do antihypertensive drugs really have antitumor effects? Baseline differences in hypertensive and non-hypertensive patients with advanced pancreatic cancer
Although the antitumor effects of antihypertensive drugs for patients with advanced pancreatic cancer (APC) have been investigated, their efficacy remains unclear. Previous studies suggest that hypertensive (HT) patients with APC are significantly older than non-HT patients with APC, and that other major baseline differences in patient characteristics which may affect prognosis exist between HT and non-HT patients. It is also possible that antihypertensive drugs lack antitumor activity. Therefore, we herein retrospectively investigated the baseline differences between HT and non-HT patients with APC. From January 2015 to April 2020, 56 patients with APC received nab-paclitaxel plus gemcitabine as first-line chemotherapy at Higashiosaka City Medical Center (Higashiosaka, Japan). Of these 56 patients, 30 were diagnosed with hypertension (HT group); the remaining 26 did not have hypertension (non-HT group). Differences between the two groups were compared and prognostic factors were evaluated. Patients in the HT group had significantly less sarcopenia, a significantly larger body mass index, were significantly older, and significantly more likely to have a regular doctor and primary site in the body and tail of the pancreas than those in the non-HT group. Although no significant difference was found in the treatment response, patients in the HT group were significantly more likely to move to second-line chemotherapy than those in the non-HT group. Survival curves showed that median overall survival (OS) in the HT group was significantly longer (10.5 months) than in the non-HT group (6.8 months, P = .04). Multivariate analysis did not identify the use of antihypertensive drugs as an independent prognostic factor of OS. We identified key baseline differences in the characteristics of APC patients with and without HT, suggesting that major selection bias could occur when investigating the efficacy of antihypertensive drugs in all populations. Therefore, it is possible that antihypertensive drugs lack antitumor activity. To determine the true efficacy of antihypertensive drugs for APC, HT, and non-HT patients in another population should be investigated, or a prospective, randomized, controlled trial conducted that is stratified by HT or non-HT status.
- 22 July 2022
- Published by Wolters Kluwer Health in Medicine
- Vol. 101 (29) , e29532
Open AccessDo antihypertensive drugs really have antitumor effects? Baseline differences in hypertensive and non-hypertensive patients with advanced pancreatic cancer
Although the antitumor effects of antihypertensive drugs for patients with advanced pancreatic cancer (APC) have been investigated, their efficacy remains unclear. Previous studies suggest that hypertensive (HT) patients with APC are significantly older than non-HT patients with APC, and that other major baseline differences in patient characteristics which may affect prognosis exist between HT and non-HT patients. It is also possible that antihypertensive drugs lack antitumor activity. Therefore, we herein retrospectively investigated the baseline differences between HT and non-HT patients with APC. From January 2015 to April 2020, 56 patients with APC received nab-paclitaxel plus gemcitabine as first-line chemotherapy at Higashiosaka City Medical Center (Higashiosaka, Japan). Of these 56 patients, 30 were diagnosed with hypertension (HT group); the remaining 26 did not have hypertension (non-HT group). Differences between the two groups were compared and prognostic factors were evaluated. Patients in the HT group had significantly less sarcopenia, a significantly larger body mass index, were significantly older, and significantly more likely to have a regular doctor and primary site in the body and tail of the pancreas than those in the non-HT group. Although no significant difference was found in the treatment response, patients in the HT group were significantly more likely to move to second-line chemotherapy than those in the non-HT group. Survival curves showed that median overall survival (OS) in the HT group was significantly longer (10.5 months) than in the non-HT group (6.8 months, P = .04). Multivariate analysis did not identify the use of antihypertensive drugs as an independent prognostic factor of OS. We identified key baseline differences in the characteristics of APC patients with and without HT, suggesting that major selection bias could occur when investigating the efficacy of antihypertensive drugs in all populations. Therefore, it is possible that antihypertensive drugs lack antitumor activity. To determine the true efficacy of antihypertensive drugs for APC, HT, and non-HT patients in another population should be investigated, or a prospective, randomized, controlled trial conducted that is stratified by HT or non-HT status.