AYAtsushi Yamada

Atsushi Yamada

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Atsushi Yamada has a total of 31 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    Methodology for Determining Interface-State Density in AlGaN/GaN MIS-HEMT Structures Using Sub-Bandgap Illumination

    by Maciej Matys, Yoichi Kamada, Atsushi Yamada, Toshihiro Ohki

    In this work, we present a methodology for determining the interface-state density distribution in metal-insulator-semiconductor (MIS) AlGaN/GaN heterostructures using sub-bandgap illumination. First, we discuss the electronic transitions that occur during sub-bandgap illumination of MIS AlGaN/GaN heterostructures. In particular, we show how these transitions can induce a threshold-voltage shift in MIS AlGaN/GaN HEMT structures and, consequently, lead to a completely erroneous interpretation of the results. In this context, we experimentally demonstrate that the interface-state density distribution can be significantly overestimated due to, for example, free-hole generation resulting from electronic transitions via interface states at the AlGaN/insulator interface and/or deep levels in the GaN buffer layer. Finally, we provide guidelines for the accurate determination of the interface-state density in MIS AlGaN/GaN heterostructures using sub-bandgap illumination, including detailed measurement and analysis procedures.

  • Open Access

    GaN-based MIS HEMT with SiAlN gate dielectric achieving over 70% PAE and 10 W mm −1 at 8 GHz

    by Yuichi Minoura, Atsushi Yamada, Kenji Saito, Norikazu Nakamura, Toshihiro Ohki

    We achieved a simultaneous record-high power-added efficiency (PAE) of 71.4% and an output power density of 10.4 W mm −1 at 8 GHz in an AlGaN/GaN metal-insulator-semiconductor (MIS) high-electron-mobility transistor (HEMT) on a free-standing GaN substrate, utilizing SiAlN as the gate dielectric. This exceptional performance stems from the high quality of the metal-organic chemical vapor deposited SiAlN gate dielectric and the gate field plate structure employing a SiN/SiAlN stack, enabling the combined realization of high output power and efficiency. These results emphatically demonstrate the significant potential of MIS gate structures for advanced microwave power amplifiers across various applications.

  • Open Access

    A simple method for detection and quantitative estimation of deep levels in a barrier layer of AlGaN/GaN HEMT structures by analysis of light induced threshold voltage shift

    by Maciej Matys, Atsushi Yamada, Yoichi Kamada, Toshihiro Ohki

    The characterization of deep levels in AlGaN/gallium nitride (GaN) heterostructures is one of the most important problems in GaN high electron mobility transistor (HEMT) technology. This work reports on a technique for determination of deep level concentration in AlGaN/GaN HEMT structures. The proposed method is relatively simple, and it is based on the detection of free holes created by optically induced transitions of electrons from the deep levels to the conduction band. The developed method can detect and provide quantitative estimation of deep level traps in a barrier layer of AlGaN/GaN HEMT structures. Furthermore, it provides a framework for analysis of light induced threshold voltage shift, which includes an important experimental criterion of determination whether the holes are generated or not in the AlGaN/GaN HEMT structures by subbandgap illumination. The method was verified by applying it to a study of the deep levels in GaN HEMTs grown on various substrates, i.e., SiC and GaN.


  • Open Access

    Effects of indium within a barrier on the gate leakage current in an InAlGaN/GaN high-electron-mobility transistor

    by Atsushi Yamada, Toshihiro Ohki

    We investigated the impact of In within barriers on the gate leakage current in InAlGaN/GaN high-electron-mobility transistors (HEMTs). The results revealed that the gate leakage current in the (In)AlGaN barriers depends solely on the two-dimensional electron gas density, regardless of the presence of In atoms. Furthermore, the inclusion of In atoms reduces tensile strain within the high-Al-composition barrier, suppressing crack formation. This makes InAlGaN suitable for high-output-power HEMTs with high-Al-content barriers. Moreover, we demonstrate that the terminating dislocations using an AlN spacer and an amorphous AlN cap are an effective method for suppressing the gate leakage current in InAlGaN/GaN HEMTs.


  • Open Access

    Optimizing and Understanding amorphous SiN Thin Film Deposition for GaN-HEMTs using Machine Learning and Causal Discovery

    by Kenji Homma, Akito Maruo, Sotaro Kuribayashi, Hiroyuki Higuchi, Hideyuki Jippo, Atsushi Yamada, Toshihiro Ohki

    Machine learning–based material optimization often proceeds as a black box process, making it difficult to explain the rationale behind the optimized process conditions. This study used correlation analysis and causal discovery to determine amorphous silicon nitride (a-SiN) deposition parameters for GaN high-electron-mobility transistor (HEMT) devices, comparing their interpretability. To simultaneously optimize the breakdown voltage, hysteresis voltage difference, and sheet resistance, experiments were conducted by varying the SiH4 flow rate, applied radiofrequency (RF) power, postannealing temperature, and annealing time. A genetic algorithm (GA) was used to optimize a Gaussian process (GP) model trained on 10 datasets. The yielded optimal conditions were as follows: SiH4 flow rate of 1.45–1.65 SCCM, a RF power of 58–62 W, postannealing temperature of 700°C, and annealing time of 1–5 min. The mechanism underlying the optimal conditions was elucidated by analyzing relationships among independent variables, objective functions, and intermediate variables using correlation analysis and causal discovery with DirectLiNGAM. Both methods identified consistent intermediate factors, with causal discovery providing a quantitative hypothesis confirming the correlation analysis and improving interpretability.

  • Top Cited Papers
    Open Access

    AlGaN/GaN HEMT on a free-standing GaN substrate with record 85.2% power-added efficiency at 2.45 GHz

    by Toshihiro Ohki, Atsushi Yamada, Yuichi Minoura, Yusuke Kumazaki, Kenji Saito, Masaru Sato

    An AlGaN/GaN high-electron-mobility transistor (HEMT) on a free-standing GaN substrate achieved impressive power-added and drain efficiencies of 85.2% and 89.0%, respectively, at 2.45 GHz. We improved the GaN channel quality by reducing the C concentration and eliminated the buffer leakage path by removing the residual Si at the substrate-epitaxial layer interface. These improvements, combined with the reduction in dislocation density and the elimination of the nucleation layer by using a free-standing GaN substrate, contributed to the enhanced efficiency. To the best of our knowledge, the achieved efficiency represents the highest reported for GaN-based discrete HEMTs in this frequency band.


  • 37.1-dBm W-Band Power Amplifier Module Using GaN-Based HEMTs Stabilized With Resistive Back Metal for Broadband Wireless Applications

    by Yasuhiro Nakasha, Yusuke Kumazaki, Shiro Ozaki, Naoya Okamoto, Naoki Hara, Atsushi Yamada, Toshihiro Ohki

    This letter presents a four-way W-band power amplifier (PA) module that packages GaN-based high electron mobility transistor (HEMT) millimeter-wave monolithic integrated circuits (MMICs) designed with coplanar waveguides (CPWs). A resistive-back-metal (RBM) layer was formed on the back side of the MMICs to keep stable in the module even without using substrate vias. The verification of the effect of the RBM layer was performed using CPW-based MMIC test chips. The assembled PA module, where millimeter-wave components, such as a waveguide (WG) combiner/divider and a WG-to-microstrip line transition, were optimized to reduce losses and flatten frequency responses, demonstrated stable and broadband characteristics in a frequency range of 88–100 GHz. A peak output power (POUT) of 37.1 dBm with a power-added efficiency (PAE) of 9.9% was achieved at a frequency of 92 GHz and a bias voltage (VDS) of 15 V. VDS was set to 20 V to enhance the power performance of the PA module, achieving a peak POUT of 38.8 dBm with a PAE of 8.1%. To the best of our knowledge, the PA module exhibited the highest peak POUT value among W-band single PA modules with a bandwidth (BW) of more than 10 GHz.


  • Open Access

    High-power and efficiency W-band InAlGaN/AlN/GaN high-electron-mobility transistors for future high-capacity wireless communications

    by Yusuke Kumazaki, Shiro Ozaki, Yasuhiro Nakasha, Naoya Okamoto, Atsushi Yamada, Toshihiro Ohki

    This study describes high-power and high-efficiency W-band InAlGaN/AlN/GaN high-electron-mobility transistors (HEMTs) for future sub-terahertz wireless communications. A low-thermal-budget selective-area growth (SAG) process was developed to obtain low contact resistance with low trap states. Transmission lines and substrate structures were optimized to obtain high-thermal conductivity and low substrate resonance. Consequently, a high output power of 28.7 dBm (742 mW), output power density of 4.6 W mm−1, and power-added efficiency (PAE) of 28.0% were achieved with pre-matched InAlGaN/AlN/GaN HEMTs at 90 GHz, which were superior combination of output power and PAE compared to the conventional high-temperature SAG process.


  • 31 W/mm at 8 GHz in InAlGaN/GaN HEMT With Thermal CVD SiNx Passivation

    by Atsushi Yamada, Yuichi Minoura, Naoko Kurahashi, Yoichi Kamada, Toshihiro Ohki, Masaru Sato, Norikazu Nakamura

    The study reports the findings on a quaternary InAlGaN/GaN high electron mobility transistor (HEMT) employing a thermal chemical vapor deposition (TCVD) silicon nitride (SiN x ) passivation with a record high output power density of 31.0 W/mm in the X-band. We compared the two different SiN x passivation methods, namely, TCVD deposition, and plasma-enhanced CVD (PECVD) deposition, for InAlGaN/GaN HEMTs and investigated the effects on device performance. PECVD SiN x passivation caused a considerable degradation of the two-dimensional electron gas (2DEG) mobility. However, TCVD SiN x could suppress the degradation of 2DEG mobility, resulting in a low sheet resistance of 293 ohm/sq. with a high 2DEG mobility of 2048 cm 2 V -1 s -1 . Furthermore, InAlGaN/GaN HEMT with TCVD SiN x passivation exhibited a high-drain current of 1230 mA/mm even after off-state stress due to the reduced current collapse and low sheet resistance. The off-state breakdown voltage increased from 169 to 227 V on using TCVD SiN x despite an increase in the maximum drain current, resulting in a high voltage of 90 V at radiofrequency. We successfully demonstrated the state-of-the-art high output power density GaN-based HEMTs with an InAlGaN barrier and TCVD SiN x passivation. Our results revealed that TCVD SiN x passivation can facilitate the application of InAlGaN/GaN HEMTs for high-power amplifiers.


  • Enhancement of two-dimensional electron gas mobility using strain reduced AlGaN barriers grown by metalorganic vapor phase epitaxy under nitrogen atmosphere

    by Atsushi Yamada, Junya Yaita, Junji Kotani

    We demonstrated high-electron-mobility transistors (HEMTs) with enhanced two-dimensional electron gas (2DEG) mobility using a low-strain AlGaN barrier grown by metalorganic vapor phase epitaxy under a nitrogen atmosphere. We investigated the effects of the growth temperature under a nitrogen atmosphere on the electrical properties of AlGaN-HEMT structures, focusing on 2DEG mobility. At growth temperatures below 855 °C, the 2DEG mobility decreased with decreasing growth temperature owing to an increase in the threading dislocation density. However, at growth temperatures above 855 °C, the 2DEG mobility decreased with increasing growth temperature. This finding was attributed to the compressive strain in the GaN channel, which increased with increasing growth temperature owing to the increased tensile strain in the AlGaN barriers. We concluded that temperatures around 855 °C are suitable for AlGaN barrier growth under nitrogen atmosphere. Finally, we achieved the highest 2DEG mobility of 2182 cm 2 V −1 s −1 with a low sheet resistance of 406 Ω sq −1 . using an Al 0.41 Ga 0.59 N barrier.