Felix Schölderle
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Felix Schölderle has a total of 37 co-authors. Here are the top co-authors by number of shared publications:
Kai Zosseder
10 shared publicationsDaniela Pfrang
7 shared publications- Kai Zosseder
Chair of Hydrogeology, Technical University of Munich, Munich, Germany
6 shared publications - Charlotte M. Krawczyk
GFZ Helmholtz Centre for Geosciences, Potsdam, 14467, Germany
5 shared publications - Christopher Wollin
GFZ Helmholtz Centre for Geosciences
4 shared publications - Thomas Reinsch
Fraunhofer IEG, Research Institution for Energy Infrastructures and Geothermal Systems, Bochum, Germany
4 shared publications
Latest Publications
- Open Access
- 29 July 2026
- Published by Springer Nature in Geothermal Energy
- Vol. 14 (1) , 23
Linking transmissibility and hydraulically active zones in the deep geothermal reservoir in Bavaria
- 29 July 2026
- Published by Springer Nature in Geothermal Energy
- Vol. 14 (1) , 23
Open AccessLinking transmissibility and hydraulically active zones in the deep geothermal reservoir in Bavaria
- Open Access
- 10 June 2026
- Published by Copernicus GmbH
Seven Years of Fiber Optic Monitoring in Highly Deviated Deep Geothermal Wells: Hard-Won Lessons from Deployment to Long-Term Data Integrity
In autumn 2019, fiber-optic cables with both single-mode and multi-mode fibers were permanently installed in an urban multi-well project in Munich, southern Germany, which was under construction at the time. One cable was cemented in place behind the casing to a depth of 700 meters, a practice commonly seen in the oil and gas industry but rare in geothermal energy. Meanwhile, a second cable was permanently suspended in a deviated, 3.7 km long (measured depth) and 2.9 km deep (true vertical depth) production well within the thermal water stream to bottom end. The newly installation was specifically designed and optimized for this purpose. Since then, DTS data, as well as pressure/temperature data from a Fabry-Pérot PT gauge spliced into the cable, have been continuously measured during shut-in, testing, and production phases of the well. DDSS/DAS data were also collected as part of various campaigns, including water injection tests and vertical seismic profiling. In 2023, a third well at the site, an injection well with up to 69° deviation with a more challenging geometry (no production casing in the reservoir “open hole” and large outbreaks), was reequipped with an additional cable including two Fabry-Pérot gauges and integrated into the underground monitoring infrastructure.This contribution presents key learnings from seven years of continuous fiber-optic monitoring across all operational phases of a geothermal site. We discuss installation concepts and their practical trade-offs, including the challenges of data acquisition and interpretation in a complex urban geothermal setting: distinguishing dynamic strain from thermally induced signals, pump and flow signatures, and other operational states remains a central analytical challenge. The long-term performance of the permanently installed cables is evaluated with respect to fiber integrity, signal degradation, and the risks associated with well interventions as pump changes over a seven-year period. We further assess the potential and current limitations of single-mode DTS in our setting. On the application side, we examine which conventional downhole logging operations can be replaced or validated by the permanent monitoring system, and what benefit continuous monitoring provides for reservoir management and operational decision-making. Finally, we provide an outlook on the planned completion of the site's monitoring infrastructure and the scientific and operational objectives we aim to address with the expanded multi-well fiber-optic network.
- 10 June 2026
- Published by Copernicus GmbH
Open AccessSeven Years of Fiber Optic Monitoring in Highly Deviated Deep Geothermal Wells: Hard-Won Lessons from Deployment to Long-Term Data Integrity
In autumn 2019, fiber-optic cables with both single-mode and multi-mode fibers were permanently installed in an urban multi-well project in Munich, southern Germany, which was under construction at the time. One cable was cemented in place behind the casing to a depth of 700 meters, a practice commonly seen in the oil and gas industry but rare in geothermal energy. Meanwhile, a second cable was permanently suspended in a deviated, 3.7 km long (measured depth) and 2.9 km deep (true vertical depth) production well within the thermal water stream to bottom end. The newly installation was specifically designed and optimized for this purpose. Since then, DTS data, as well as pressure/temperature data from a Fabry-Pérot PT gauge spliced into the cable, have been continuously measured during shut-in, testing, and production phases of the well. DDSS/DAS data were also collected as part of various campaigns, including water injection tests and vertical seismic profiling. In 2023, a third well at the site, an injection well with up to 69° deviation with a more challenging geometry (no production casing in the reservoir “open hole” and large outbreaks), was reequipped with an additional cable including two Fabry-Pérot gauges and integrated into the underground monitoring infrastructure.This contribution presents key learnings from seven years of continuous fiber-optic monitoring across all operational phases of a geothermal site. We discuss installation concepts and their practical trade-offs, including the challenges of data acquisition and interpretation in a complex urban geothermal setting: distinguishing dynamic strain from thermally induced signals, pump and flow signatures, and other operational states remains a central analytical challenge. The long-term performance of the permanently installed cables is evaluated with respect to fiber integrity, signal degradation, and the risks associated with well interventions as pump changes over a seven-year period. We further assess the potential and current limitations of single-mode DTS in our setting. On the application side, we examine which conventional downhole logging operations can be replaced or validated by the permanent monitoring system, and what benefit continuous monitoring provides for reservoir management and operational decision-making. Finally, we provide an outlook on the planned completion of the site's monitoring infrastructure and the scientific and operational objectives we aim to address with the expanded multi-well fiber-optic network.
- Open Access
- 10 June 2026
- Published by Copernicus GmbH
Beyond Conventional Monitoring: Permanent Fibre Optic Sensing in a Geothermal Reservoir During Production and Injection
In deep geothermal wells, conventional downhole data is commonly very limited, especially during long-term plant operation. Since 2021, permanently installed fibre optic cables in one production and one injection well at a hydrogeothermal site in Munich have enabled continuous DTS (Distributed Temperature Sensing) measurements along the entire borehole length (~4 km) as well as pressure monitoring at reservoir depth at 3000 m MD (measured depth) using Fabry–Pérot gauges. In addition, several DDSS (Distributed Dynamic Strain Sensing) campaigns were conducted during different operational stages of the geothermal plant. In this contribution, we present borehole and reservoir processes derived from this unique long-term fibre optic dataset and discuss their implications for reservoir characterization and geothermal field development.Different approaches were applied to resolve production and injection zones within the reservoir at high spatial resolution. These include energy and mass balance modelling of temperature profiles during production, thermal slug tracking to derive fluid velocities and flow contributions, and analysis of borehole warmback during shut-in periods. DTS-derived results provide rapid and robust characterization of flow zones and extend beyond the spatial and temporal limitations of conventional flowmeter logging. In addition, low-frequency DDSS (LF-DDSS) measurements reveal highly detailed flow dynamics and previously unresolved flow processes within the wells and reservoir. In the injection well, 78 % of the injection happens in the upper 120 m MD of the 1000 m long reservoir section. In the lower half, free convection cells dominate in the wellbore during steady injection and a 40 m thick localized hydraulic anomaly even shows 1 l/s of inflow into the wellbore from the formation.Furthermore, the temporal evolution of the production/injection temperature and flow zones indicates dynamic changes in reservoir properties during plant operation. Pressure data from fibre optic gauges enables repeated pressure transient analysis (PTA) of shut-in phases. These show that long-term operation has significantly increased the transmissivity of one of the wells and suggest an altered flow regime. The measurements further provide an important basis for calibration and validation of 3D thermo-hydraulic numerical models of the entire six-well system at the Munich plant.Overall, the presented results show how the applied methodical approaches can improve the geological and reservoir understanding of deep geothermal systems in the Bavarian Molasse Basin and will support future reservoir engineering, field development, and forecasting of long-term well performance.
- 10 June 2026
- Published by Copernicus GmbH
Open AccessBeyond Conventional Monitoring: Permanent Fibre Optic Sensing in a Geothermal Reservoir During Production and Injection
In deep geothermal wells, conventional downhole data is commonly very limited, especially during long-term plant operation. Since 2021, permanently installed fibre optic cables in one production and one injection well at a hydrogeothermal site in Munich have enabled continuous DTS (Distributed Temperature Sensing) measurements along the entire borehole length (~4 km) as well as pressure monitoring at reservoir depth at 3000 m MD (measured depth) using Fabry–Pérot gauges. In addition, several DDSS (Distributed Dynamic Strain Sensing) campaigns were conducted during different operational stages of the geothermal plant. In this contribution, we present borehole and reservoir processes derived from this unique long-term fibre optic dataset and discuss their implications for reservoir characterization and geothermal field development.Different approaches were applied to resolve production and injection zones within the reservoir at high spatial resolution. These include energy and mass balance modelling of temperature profiles during production, thermal slug tracking to derive fluid velocities and flow contributions, and analysis of borehole warmback during shut-in periods. DTS-derived results provide rapid and robust characterization of flow zones and extend beyond the spatial and temporal limitations of conventional flowmeter logging. In addition, low-frequency DDSS (LF-DDSS) measurements reveal highly detailed flow dynamics and previously unresolved flow processes within the wells and reservoir. In the injection well, 78 % of the injection happens in the upper 120 m MD of the 1000 m long reservoir section. In the lower half, free convection cells dominate in the wellbore during steady injection and a 40 m thick localized hydraulic anomaly even shows 1 l/s of inflow into the wellbore from the formation.Furthermore, the temporal evolution of the production/injection temperature and flow zones indicates dynamic changes in reservoir properties during plant operation. Pressure data from fibre optic gauges enables repeated pressure transient analysis (PTA) of shut-in phases. These show that long-term operation has significantly increased the transmissivity of one of the wells and suggest an altered flow regime. The measurements further provide an important basis for calibration and validation of 3D thermo-hydraulic numerical models of the entire six-well system at the Munich plant.Overall, the presented results show how the applied methodical approaches can improve the geological and reservoir understanding of deep geothermal systems in the Bavarian Molasse Basin and will support future reservoir engineering, field development, and forecasting of long-term well performance.
- Open Access
- 14 March 2026
- Published by Copernicus GmbH
Characterising the Heterogeneity of Transmissibility and Hydraulically Active Zones in the Deep Geothermal Reservoir in Bavaria
The Upper Jurassic-Lower Cretaceous (Malm-Purbeck) reservoir of the North Alpine Foreland Basin (NAFB) in Bavaria represents one of Europe’s most important deep hydrothermal reservoirs for sustainable heat supply. Reservoir transmissibility shows strong spatial variability and remains insufficiently characterized. In particular, the linkage between basin-scale transmissibility, vertically resolved hydraulically active zones, and their sequence stratigraphic context has not yet been systematically investigated. This gap is addressed by integrating transmissibility, hydraulically active zones, and a sequence-stratigraphic framework to provide a comprehensive characterisation of the reservoir.Transmissibility values were derived from pressure transient analyses of geothermal and research well tests, resulting in a harmonised dataset of 57 high-quality measurements across the NAFB. These data were used to generate a basin-wide probabilistic transmissibility map using Empirical Bayesian Indicator Kriging (EBIK), a geostatistical approach that explicitly accounts for spatial uncertainty and is well-suited for sparse datasets. The resulting map confirms a general decrease in transmissibility with increasing burial depth from north to south, while also revealing regional deviations from this trend.To resolve reservoir heterogeneity at the vertical scale, flowmeter measurements from 14 wells were analysed to identify hydraulically active zones and quantify their relative contribution to total flow. By distributing total well transmissibility according to flow contribution and zone thickness, transmissibility values were converted into permeability for individual hydraulically active zones. This approach reveals a systematic decrease in permeability with depth, characterized by distinct regional reservoir types previously identified by multivariate statistical analyses.Hydraulically active zones were further positioned within a sequence-stratigraphic framework, enabling basin-scale correlation. The results demonstrate that hydraulically active zones occur predominantly within specific sequence-stratigraphic intervals, while deeper units contribute progressively less to flow. Although sequence-stratigraphy does not directly control permeability magnitude, it provides a consistent framework for understanding the vertical distribution of flow zones. Overall, this study provides the first integrated basin-scale assessment linking transmissibility, hydraulically active zones, and sequence stratigraphy in the NAFB. The results significantly improve reservoir characterisation, form a robust basis for static and dynamic modelling, and will be a key component of a decision support model for deep geothermal energy in the future.
- 14 March 2026
- Published by Copernicus GmbH
Open AccessCharacterising the Heterogeneity of Transmissibility and Hydraulically Active Zones in the Deep Geothermal Reservoir in Bavaria
The Upper Jurassic-Lower Cretaceous (Malm-Purbeck) reservoir of the North Alpine Foreland Basin (NAFB) in Bavaria represents one of Europe’s most important deep hydrothermal reservoirs for sustainable heat supply. Reservoir transmissibility shows strong spatial variability and remains insufficiently characterized. In particular, the linkage between basin-scale transmissibility, vertically resolved hydraulically active zones, and their sequence stratigraphic context has not yet been systematically investigated. This gap is addressed by integrating transmissibility, hydraulically active zones, and a sequence-stratigraphic framework to provide a comprehensive characterisation of the reservoir.Transmissibility values were derived from pressure transient analyses of geothermal and research well tests, resulting in a harmonised dataset of 57 high-quality measurements across the NAFB. These data were used to generate a basin-wide probabilistic transmissibility map using Empirical Bayesian Indicator Kriging (EBIK), a geostatistical approach that explicitly accounts for spatial uncertainty and is well-suited for sparse datasets. The resulting map confirms a general decrease in transmissibility with increasing burial depth from north to south, while also revealing regional deviations from this trend.To resolve reservoir heterogeneity at the vertical scale, flowmeter measurements from 14 wells were analysed to identify hydraulically active zones and quantify their relative contribution to total flow. By distributing total well transmissibility according to flow contribution and zone thickness, transmissibility values were converted into permeability for individual hydraulically active zones. This approach reveals a systematic decrease in permeability with depth, characterized by distinct regional reservoir types previously identified by multivariate statistical analyses.Hydraulically active zones were further positioned within a sequence-stratigraphic framework, enabling basin-scale correlation. The results demonstrate that hydraulically active zones occur predominantly within specific sequence-stratigraphic intervals, while deeper units contribute progressively less to flow. Although sequence-stratigraphy does not directly control permeability magnitude, it provides a consistent framework for understanding the vertical distribution of flow zones. Overall, this study provides the first integrated basin-scale assessment linking transmissibility, hydraulically active zones, and sequence stratigraphy in the NAFB. The results significantly improve reservoir characterisation, form a robust basis for static and dynamic modelling, and will be a key component of a decision support model for deep geothermal energy in the future.
- Open Access
- 14 March 2026
- Published by Copernicus GmbH
Sequence-stratigraphic control on facies and karst in Europe’s largest geothermal carbonate reservoir: The Malm Reservoir of the South German Molasse Basin (greater Munich area)
The Upper Jurassic to Lower Cretaceous (Purbeck) sedimentary succession of the South German Molasse Basin, here referred as the Malm Reservoir, hosts one of the largest hydrothermal resources in continental Europe. It exhibits strong heterogeneity driven by depositional facies variability within a sequence stratigraphic framework, diagenetic overprint including karst horizon development, and structural elements typical for foreland sedimentary basins. The GIGA-M project aims to study the deep geothermal reservoir of the greater Munich area through integrated well data and large-scale 3D seismic interpretation, providing the geological basis for a reservoir management model enabling synergetic geothermal utilisation. Hydraulically active zones in the most productive geothermal wells are commonly observed within karstified intervals (Hörbrand et al., 2025, Schölderle et al., 2023) and are therefore commonly described as one of the main reasons for the exceptional productivity of the reservoir. Facies architecture and Mesozoic to Cenozoic faults further influence reservoir heterogeneity and fluid flow. Karst horizons are unevenly distributed throughout the reservoir, indicating a complex interplay of syn-depositional and diagenetic controls that is common in many karstified carbonate reservoirs worldwide.This study evaluates how sequence stratigraphy, facies architecture, and karst development control flow zones and matrix porosity in the Malm Reservoir. The analysis focuses on stratigraphic and facies organisation and karst characterisation. Available well data and recent studies indicate that fault systems and fractures play only a minor role in the hydraulic behaviour of the Malm Reservoir; consequently, they are not a primary focus of this study. Our workflow integrates geophysical well logs, mud-log descriptions, and borehole image logs to identify and classify karst features in wells and, where flow data are available, to correlate karst categories with observed flow zones. This approach enables the recognition of karst horizons associated with enhanced porosity and permeability, directly relevant to reservoir quality and well-interference assessment.A regional sequence stratigraphic framework (Wolpert et al, 2022; Wolpert, 2020) is used to link relative sea-level changes to facies distribution within the carbonate ramp system. Facies associations primarily control matrix porosity and storage properties, whereas sequence boundaries mark exposure surfaces and sedimentary gaps where karst can develop. While early diagenetic karst may initiate at sequence boundaries, the most extensive karst development is interpreted to result from prolonged subaerial exposure of the reservoir during the Cretaceous, highlighting the critical importance of identifying and differentiating sequence boundaries according to their timing and duration of exposure. This Cretaceous karst generation is considered the main candidate for the laterally extensive karst systems that cross-cut facies boundaries and form the main geothermal flow zones, as confirmed by flow observations in wells. These karst horizons exert a first-order control on transmissivity and hydraulic connectivity. Within the GIGA-M project, this stratigraphic and karst framework provides the geological basis for developing facies- and karst-probability maps calibrated with existing and future GIGA-M 3D seismic data, enabling the assessment of flow connectivity and well interference and supporting geothermal reservoir management at the greater Munich area scale.
- 14 March 2026
- Published by Copernicus GmbH
Open AccessSequence-stratigraphic control on facies and karst in Europe’s largest geothermal carbonate reservoir: The Malm Reservoir of the South German Molasse Basin (greater Munich area)
The Upper Jurassic to Lower Cretaceous (Purbeck) sedimentary succession of the South German Molasse Basin, here referred as the Malm Reservoir, hosts one of the largest hydrothermal resources in continental Europe. It exhibits strong heterogeneity driven by depositional facies variability within a sequence stratigraphic framework, diagenetic overprint including karst horizon development, and structural elements typical for foreland sedimentary basins. The GIGA-M project aims to study the deep geothermal reservoir of the greater Munich area through integrated well data and large-scale 3D seismic interpretation, providing the geological basis for a reservoir management model enabling synergetic geothermal utilisation. Hydraulically active zones in the most productive geothermal wells are commonly observed within karstified intervals (Hörbrand et al., 2025, Schölderle et al., 2023) and are therefore commonly described as one of the main reasons for the exceptional productivity of the reservoir. Facies architecture and Mesozoic to Cenozoic faults further influence reservoir heterogeneity and fluid flow. Karst horizons are unevenly distributed throughout the reservoir, indicating a complex interplay of syn-depositional and diagenetic controls that is common in many karstified carbonate reservoirs worldwide.This study evaluates how sequence stratigraphy, facies architecture, and karst development control flow zones and matrix porosity in the Malm Reservoir. The analysis focuses on stratigraphic and facies organisation and karst characterisation. Available well data and recent studies indicate that fault systems and fractures play only a minor role in the hydraulic behaviour of the Malm Reservoir; consequently, they are not a primary focus of this study. Our workflow integrates geophysical well logs, mud-log descriptions, and borehole image logs to identify and classify karst features in wells and, where flow data are available, to correlate karst categories with observed flow zones. This approach enables the recognition of karst horizons associated with enhanced porosity and permeability, directly relevant to reservoir quality and well-interference assessment.A regional sequence stratigraphic framework (Wolpert et al, 2022; Wolpert, 2020) is used to link relative sea-level changes to facies distribution within the carbonate ramp system. Facies associations primarily control matrix porosity and storage properties, whereas sequence boundaries mark exposure surfaces and sedimentary gaps where karst can develop. While early diagenetic karst may initiate at sequence boundaries, the most extensive karst development is interpreted to result from prolonged subaerial exposure of the reservoir during the Cretaceous, highlighting the critical importance of identifying and differentiating sequence boundaries according to their timing and duration of exposure. This Cretaceous karst generation is considered the main candidate for the laterally extensive karst systems that cross-cut facies boundaries and form the main geothermal flow zones, as confirmed by flow observations in wells. These karst horizons exert a first-order control on transmissivity and hydraulic connectivity. Within the GIGA-M project, this stratigraphic and karst framework provides the geological basis for developing facies- and karst-probability maps calibrated with existing and future GIGA-M 3D seismic data, enabling the assessment of flow connectivity and well interference and supporting geothermal reservoir management at the greater Munich area scale.
- Open Access
- 14 March 2026
- Published by Copernicus GmbH
From Heterogeneous Well Data to Probabilistic 3D Temperature Modelling of the Bavarian Molasse Basin for Geothermal Exploration
Reliable subsurface temperature models are a key prerequisite for geothermal exploration, reservoir assessment, and broader subsurface energy applications. Within the GeoChaNce research project, we present an integrated geological and thermal characterization of the Bavarian part of the North Alpine Foreland Basin (NAFB), combining petrophysical analyses of a large heterogeneous well dataset with advanced geostatistical modelling approaches.The thermal analysis focuses on developing a fully volumetric 3D temperature model that covers depths ranging from 300 m to 5000 m true vertical depth. The temperature dataset comprises 196 bottom-hole temperature (BHT) values, which were corrected using Monte Carlo methods to account for uncertainty, and 19 high-quality continuous temperature logs, including wireline and fiber-optic measurements. To robustly account for data heterogeneity and measurement uncertainty, particularly in the error-prone BHT correction methods, Empirical Bayesian Kriging (EBK) was applied within a 3D framework. The model was computed on a 100 × 100 × 100 m voxel grid and provides probabilistic temperature distributions for P10, P50, and P90 scenarios. Cross-validation using a leave-one-out approach yields a mean standard error of 5.6 K, with more than 87% of predictions falling within the modelled 90% confidence interval.The resulting temperature model reproduces well-known regional thermal anomalies of the Molasse Basin, including positive anomalies in the Munich and Landshut areas and a pronounced negative anomaly associated with the Wasserburg Trough. In addition, a 3D Empirical Bayesian Indicator Kriging approach was used to derive probability maps for reaching specific temperature thresholds (e.g., 80 °C and 100 °C), providing a robust probabilistic framework for geothermal assessment.Ongoing work focuses on coupling the solely statistical EBK temperature model with lithology-specific thermal conductivity data derived from laboratory measurements, mixing-law models, and petrophysical interpretations of logging data. This will allow calibration of the temperature field, derivation of regional heat-flow densities, and calculation of horizon-based temperature gradients. The GeoChaNce results provide an improved, uncertainty-aware thermal framework for the Bavarian Molasse Basin, contributing to more reliable geothermal resource assessments and forming a key component for a future geothermal decision-support system for the reservoir.
- 14 March 2026
- Published by Copernicus GmbH
Open AccessFrom Heterogeneous Well Data to Probabilistic 3D Temperature Modelling of the Bavarian Molasse Basin for Geothermal Exploration
Reliable subsurface temperature models are a key prerequisite for geothermal exploration, reservoir assessment, and broader subsurface energy applications. Within the GeoChaNce research project, we present an integrated geological and thermal characterization of the Bavarian part of the North Alpine Foreland Basin (NAFB), combining petrophysical analyses of a large heterogeneous well dataset with advanced geostatistical modelling approaches.The thermal analysis focuses on developing a fully volumetric 3D temperature model that covers depths ranging from 300 m to 5000 m true vertical depth. The temperature dataset comprises 196 bottom-hole temperature (BHT) values, which were corrected using Monte Carlo methods to account for uncertainty, and 19 high-quality continuous temperature logs, including wireline and fiber-optic measurements. To robustly account for data heterogeneity and measurement uncertainty, particularly in the error-prone BHT correction methods, Empirical Bayesian Kriging (EBK) was applied within a 3D framework. The model was computed on a 100 × 100 × 100 m voxel grid and provides probabilistic temperature distributions for P10, P50, and P90 scenarios. Cross-validation using a leave-one-out approach yields a mean standard error of 5.6 K, with more than 87% of predictions falling within the modelled 90% confidence interval.The resulting temperature model reproduces well-known regional thermal anomalies of the Molasse Basin, including positive anomalies in the Munich and Landshut areas and a pronounced negative anomaly associated with the Wasserburg Trough. In addition, a 3D Empirical Bayesian Indicator Kriging approach was used to derive probability maps for reaching specific temperature thresholds (e.g., 80 °C and 100 °C), providing a robust probabilistic framework for geothermal assessment.Ongoing work focuses on coupling the solely statistical EBK temperature model with lithology-specific thermal conductivity data derived from laboratory measurements, mixing-law models, and petrophysical interpretations of logging data. This will allow calibration of the temperature field, derivation of regional heat-flow densities, and calculation of horizon-based temperature gradients. The GeoChaNce results provide an improved, uncertainty-aware thermal framework for the Bavarian Molasse Basin, contributing to more reliable geothermal resource assessments and forming a key component for a future geothermal decision-support system for the reservoir.
- Open Access
- 5 May 2025
- Published by Springer Nature in Geothermal Energy
- Vol. 13 (1) , 1-41
Productivity zoning and petrophysical assessment in the Munich metropolitan area for hydro-geothermal utilization using multivariate methods
The North Alpine Foreland Basin in Bavaria is one of Europe’s most important deep reservoirs for hydrogeothermal energy utilization for district heating. Most of the plants are located in the Munich metropolitan region, where there are both favorable geological conditions and a high demand for heat due to the urban character. However, the region's potential is far from fully utilized and extensive geothermal development is thus planned in the city of Munich and the surrounding municipalities. Reliable productivity prognoses help to ensure that this development is sustainable and efficient. We use the dense and comprehensive drilling data set in the region to derive a productivity zonation using multivariate methods. To do this, we derive geophysical and hydraulic parameters from the existing borehole measurements and combine them with hydrochemical, historical and technical data to derive a set of 24 individual parameters. For this parameter set, we carry out a principal component analysis (PCA) and single linkage hierarchical cluster analysis (HCA). The PCA reduces the data set to six main factors, which explain 80% of the data set variability. Of those, the most important factors fa1, fa2, and fa3, which explain 53% of the data set variability, contain mainly geological (fa1), hydrochemical (fa2), and technical parameters (fa3). The HCA reveals four main clusters, with clusters 3 and 2 in the north, 1 in the center of the study area, and 4 in the south. The spatial location of these clusters fits very well with the zoning assumed in the previous assessment analysis ‘Masterplan Geothermal Energy‘. Cluster 2 behaves very similar to cluster 3, but is separated from it by a different hydrochemistry (fa2). In addition, two outliers were identified at two doublets in the north of the study area, which are distinguished from the main clusters in one case by differing hydrochemistry and in the other case by differing hydraulic and thermal conditions. Furthermore, a sub-cluster of cluster 4 is the only one that scatters across the entire study area. However, this can be explained by factors that do not directly influence the productivity of the boreholes concerned. Our results indicate that we can divide the reservoir from north to south into three productivity types A to C, where we derive different outflow temperatures and porosities from regression equations of depth trends. Graphical Abstract
- 5 May 2025
- Published by Springer Nature in Geothermal Energy
- Vol. 13 (1) , 1-41
Open AccessProductivity zoning and petrophysical assessment in the Munich metropolitan area for hydro-geothermal utilization using multivariate methods
The North Alpine Foreland Basin in Bavaria is one of Europe’s most important deep reservoirs for hydrogeothermal energy utilization for district heating. Most of the plants are located in the Munich metropolitan region, where there are both favorable geological conditions and a high demand for heat due to the urban character. However, the region's potential is far from fully utilized and extensive geothermal development is thus planned in the city of Munich and the surrounding municipalities. Reliable productivity prognoses help to ensure that this development is sustainable and efficient. We use the dense and comprehensive drilling data set in the region to derive a productivity zonation using multivariate methods. To do this, we derive geophysical and hydraulic parameters from the existing borehole measurements and combine them with hydrochemical, historical and technical data to derive a set of 24 individual parameters. For this parameter set, we carry out a principal component analysis (PCA) and single linkage hierarchical cluster analysis (HCA). The PCA reduces the data set to six main factors, which explain 80% of the data set variability. Of those, the most important factors fa1, fa2, and fa3, which explain 53% of the data set variability, contain mainly geological (fa1), hydrochemical (fa2), and technical parameters (fa3). The HCA reveals four main clusters, with clusters 3 and 2 in the north, 1 in the center of the study area, and 4 in the south. The spatial location of these clusters fits very well with the zoning assumed in the previous assessment analysis ‘Masterplan Geothermal Energy‘. Cluster 2 behaves very similar to cluster 3, but is separated from it by a different hydrochemistry (fa2). In addition, two outliers were identified at two doublets in the north of the study area, which are distinguished from the main clusters in one case by differing hydrochemistry and in the other case by differing hydraulic and thermal conditions. Furthermore, a sub-cluster of cluster 4 is the only one that scatters across the entire study area. However, this can be explained by factors that do not directly influence the productivity of the boreholes concerned. Our results indicate that we can divide the reservoir from north to south into three productivity types A to C, where we derive different outflow temperatures and porosities from regression equations of depth trends. Graphical Abstract
- Open Access
- 20 January 2025
- Published by Copernicus GmbH
A Fiber-Optic Approach for Cement Placement Monitoring of Deep Boreholes
Reliable well completion technologies are mandatory for the safe and sustainable use of subsurface reservoirs. Achieving subsurface well integrity requires displacing the entire drilling mud with homogenous cement. For this purpose, surface pump parameters (rate, density, pressure, and volume) are generally measured, yielding average values along the borehole. Here, distributed fiber-optic sensing offers new continuous monitoring options with dense spatial sampling within a borehole.In the GFK-monitor project (https://gfk-monitor.de/en/), we investigated the primary cementation of an 874 m surface casing at a geothermal well in Munich, Germany. A 699 m long fiber optic cable, implemented by the Geothermie Allianz Bayern (GAB), was attached to the outside of the casing in the annulus between the casing and formation and cemented. This allowed for monitoring distributed dynamic strain rate (DDSS or DAS) throughout cement placement with a sampling rate of 1000 Hz and a spatial resolution of 1 m.We analyzed the average vibration energy in the borehole by DDSS data using a root mean square approach in rolling windows for different frequency bands. Linear features with two different characteristics appear prominently in the frequency band between 0.2-0.3 Hz. One feature, which we named the “slow feature”, shows a varying slope resulting in velocities ranging from 2.5 to 6 m/s. In contrast, the accordingly called “fast feature” indicates a relatively constant velocity of around 6 m/s.To better understand these features, a theoretical model was developed that simulates the rising velocity of fluids along the annulus. This model uses a cumulative approach and considers the cement pumping rate, borehole geometry, and timings from the daily reports. We assume, that the predicted minimum velocity is required to fill the whole breakout volume. This means that the faster the velocity the smaller the flow paths cross section.A comparison of data and models reveals that the varying velocities of the "slow feature" correlate with velocities predicted by using the borehole geometry from the caliper log. The rather constant “fast feature” correlates instead with the predicted velocity of the model based on a uniform borehole geometry with the smallest possible radius, the drill diameter, which thus neglects all breakouts.In summary, due to the nearly constant pumping rate during the monitoring campaign, we hypothesize that different rising velocities result from variations in the cross-sectional area of the flow path. Based on our observations, the majority of the water spacer does not flush the borehole breakouts. With a good match to the minimum required velocity, these breakouts are filled by the first arriving cement. The following cement, with the same density, rises again on the fastest track. Thus, measuring the cement rising velocities with fiber optics and comparing them to the minimum required velocity from modeling might be a new tool to assess displacement efficiency in real-time.
- 20 January 2025
- Published by Copernicus GmbH
Open AccessA Fiber-Optic Approach for Cement Placement Monitoring of Deep Boreholes
Reliable well completion technologies are mandatory for the safe and sustainable use of subsurface reservoirs. Achieving subsurface well integrity requires displacing the entire drilling mud with homogenous cement. For this purpose, surface pump parameters (rate, density, pressure, and volume) are generally measured, yielding average values along the borehole. Here, distributed fiber-optic sensing offers new continuous monitoring options with dense spatial sampling within a borehole.In the GFK-monitor project (https://gfk-monitor.de/en/), we investigated the primary cementation of an 874 m surface casing at a geothermal well in Munich, Germany. A 699 m long fiber optic cable, implemented by the Geothermie Allianz Bayern (GAB), was attached to the outside of the casing in the annulus between the casing and formation and cemented. This allowed for monitoring distributed dynamic strain rate (DDSS or DAS) throughout cement placement with a sampling rate of 1000 Hz and a spatial resolution of 1 m.We analyzed the average vibration energy in the borehole by DDSS data using a root mean square approach in rolling windows for different frequency bands. Linear features with two different characteristics appear prominently in the frequency band between 0.2-0.3 Hz. One feature, which we named the “slow feature”, shows a varying slope resulting in velocities ranging from 2.5 to 6 m/s. In contrast, the accordingly called “fast feature” indicates a relatively constant velocity of around 6 m/s.To better understand these features, a theoretical model was developed that simulates the rising velocity of fluids along the annulus. This model uses a cumulative approach and considers the cement pumping rate, borehole geometry, and timings from the daily reports. We assume, that the predicted minimum velocity is required to fill the whole breakout volume. This means that the faster the velocity the smaller the flow paths cross section.A comparison of data and models reveals that the varying velocities of the "slow feature" correlate with velocities predicted by using the borehole geometry from the caliper log. The rather constant “fast feature” correlates instead with the predicted velocity of the model based on a uniform borehole geometry with the smallest possible radius, the drill diameter, which thus neglects all breakouts.In summary, due to the nearly constant pumping rate during the monitoring campaign, we hypothesize that different rising velocities result from variations in the cross-sectional area of the flow path. Based on our observations, the majority of the water spacer does not flush the borehole breakouts. With a good match to the minimum required velocity, these breakouts are filled by the first arriving cement. The following cement, with the same density, rises again on the fastest track. Thus, measuring the cement rising velocities with fiber optics and comparing them to the minimum required velocity from modeling might be a new tool to assess displacement efficiency in real-time.
- Open Access
- 20 January 2025
- Published by Copernicus GmbH
Operational Monitoring of Thermal Dynamics in Deep Geothermal Production and Injection Wells with Fiber Optics from the Surface to the Reservoir
In order to gain insights into the hydraulic and thermal long-term behavior of deep geothermal boreholes during operation, a fiber-optic monitoring (FOM) system was implemented at the Stadtwerke Munich's (SWM) geothermal plant 'Schäftlarnstrasse' in the national project Geothermal-Alliance Bavaria (GAB). The permanently installed fiber optic cables enable continuous measuring of the temperature in boreholes with high spatial and temporal resolution via Distributed Temperature Sensing (DTS) and of acoustics/vibration via Distributed Acoustic Sensing (DAS). In 2019, one production and one injection well were equipped with FOM in different setups and have been collecting data since then. In the injector, the cable was cemented behind the anchor pipe in the upper section of the borehole, whereas the producer was equipped with a fiber-optic cable until the total depth of the reservoir. Additionally, a fiber-optic gauge provides pressure and temperature at the top of the reservoir in this well.Among other things, precise inflow profiling in the reservoir section of the producer could be carried out using the temperature data, which helps deepen the understanding of the hydraulic behavior of the reservoir. Changes over time in the temperature of the produced thermal water can be traced back to changes in the hydraulically active zones or inflow temperatures in the reservoir. Other factors that influence the wellhead temperature, such as borehole heat losses to the surrounding rock, can be quantified using the DTS data.At the beginning of 2024, a third fiber-optic cable will be installed in an injection well at the Schäftlarnstrasse geothermal site. A similar setup as in the production well will allow for continuous measuring in the entire borehole until total depth (TD) and pressure and temperature from p/T gauges at the top of the reservoir and at TD. Therefore, both production and injection conditions in the reservoir and wellbore will be continuously monitored at all depths using DTS and DAS for the first time.We present the first interpretations of the data collected from the newly installed FOM in the injection well as well as insights into the long-term monitoring of the hydraulic and thermal dynamics in the production well to underline the importance of permanent downhole monitoring to ensure efficient and sustainable use of the geothermal reservoir.
- 20 January 2025
- Published by Copernicus GmbH
Open AccessOperational Monitoring of Thermal Dynamics in Deep Geothermal Production and Injection Wells with Fiber Optics from the Surface to the Reservoir
In order to gain insights into the hydraulic and thermal long-term behavior of deep geothermal boreholes during operation, a fiber-optic monitoring (FOM) system was implemented at the Stadtwerke Munich's (SWM) geothermal plant 'Schäftlarnstrasse' in the national project Geothermal-Alliance Bavaria (GAB). The permanently installed fiber optic cables enable continuous measuring of the temperature in boreholes with high spatial and temporal resolution via Distributed Temperature Sensing (DTS) and of acoustics/vibration via Distributed Acoustic Sensing (DAS). In 2019, one production and one injection well were equipped with FOM in different setups and have been collecting data since then. In the injector, the cable was cemented behind the anchor pipe in the upper section of the borehole, whereas the producer was equipped with a fiber-optic cable until the total depth of the reservoir. Additionally, a fiber-optic gauge provides pressure and temperature at the top of the reservoir in this well.Among other things, precise inflow profiling in the reservoir section of the producer could be carried out using the temperature data, which helps deepen the understanding of the hydraulic behavior of the reservoir. Changes over time in the temperature of the produced thermal water can be traced back to changes in the hydraulically active zones or inflow temperatures in the reservoir. Other factors that influence the wellhead temperature, such as borehole heat losses to the surrounding rock, can be quantified using the DTS data.At the beginning of 2024, a third fiber-optic cable will be installed in an injection well at the Schäftlarnstrasse geothermal site. A similar setup as in the production well will allow for continuous measuring in the entire borehole until total depth (TD) and pressure and temperature from p/T gauges at the top of the reservoir and at TD. Therefore, both production and injection conditions in the reservoir and wellbore will be continuously monitored at all depths using DTS and DAS for the first time.We present the first interpretations of the data collected from the newly installed FOM in the injection well as well as insights into the long-term monitoring of the hydraulic and thermal dynamics in the production well to underline the importance of permanent downhole monitoring to ensure efficient and sustainable use of the geothermal reservoir.
- Open Access
- 20 January 2025
- Published by Copernicus GmbH
The Uncertainty of Temperature Predictions and the Influence of Flow Zones on the Production Temperature in a Low Enthalpy Geothermal Field
Besides the amount of a thermal fluid produced and its chemical composition, temperature is one of the key parameters for the utilization of hydrothermal heat. This applies in particular to geothermal fields with low temperature/low enthalpy, as too low extraction temperatures can mean the failure of a project, while higher temperatures can enable electricity generation or generally better economic efficiency. This concerns the undisturbed (natural) temperature in the reservoir as well as that of the produced fluid at the surface, which depends on the well completion, the undisturbed reservoir temperature, and the depth and contributions of hydraulically active zones. Subsequently, improved forecasts of both the undisturbed temperature and the production temperature with a valid estimate of their uncertainty are required to provide a reliable basis for field development and risk assessment.In the national projects Geothermal-Alliance Bavaria and KompakT, we studied the temperatures in the North Alpine Foreland Basin in Bavaria, Germany. The carbonate rocks form one of Europe’s most important reservoirs for the use of deep geothermal energy, and projects for district heating and electricity generation have been realized here for more than 30 years.We developed a good practice workflow for the correction of low-quality bottom hole temperature (BHT) values based on a probabilistic Monte Carlo approach. Using this workflow, we corrected BHTs from over 300 hydrocarbon and geothermal wells and predicted the natural temperature field inside the study area. The resulting temperature model is based on risk scenarios and contains a range of uncertainty, the extent of which depends on the uncertainty of the correction input parameters at the individual locations.To study the short-term and long-term thermal behavior in the reservoir and the wellbore during production conditions, in 2019, a fiber optic cable was installed below the pump into the reservoir of a geothermal production well. We used distributed temperature sensing (DTS) to observe the hydraulically active zones and to thermally derive their contribution to the available heat amount.The knowledge gained underlines the importance of flow zone characterization and can be used to improve existing temperature models and estimate what temperatures can really be expected during extraction.
- 20 January 2025
- Published by Copernicus GmbH
Open AccessThe Uncertainty of Temperature Predictions and the Influence of Flow Zones on the Production Temperature in a Low Enthalpy Geothermal Field
Besides the amount of a thermal fluid produced and its chemical composition, temperature is one of the key parameters for the utilization of hydrothermal heat. This applies in particular to geothermal fields with low temperature/low enthalpy, as too low extraction temperatures can mean the failure of a project, while higher temperatures can enable electricity generation or generally better economic efficiency. This concerns the undisturbed (natural) temperature in the reservoir as well as that of the produced fluid at the surface, which depends on the well completion, the undisturbed reservoir temperature, and the depth and contributions of hydraulically active zones. Subsequently, improved forecasts of both the undisturbed temperature and the production temperature with a valid estimate of their uncertainty are required to provide a reliable basis for field development and risk assessment.In the national projects Geothermal-Alliance Bavaria and KompakT, we studied the temperatures in the North Alpine Foreland Basin in Bavaria, Germany. The carbonate rocks form one of Europe’s most important reservoirs for the use of deep geothermal energy, and projects for district heating and electricity generation have been realized here for more than 30 years.We developed a good practice workflow for the correction of low-quality bottom hole temperature (BHT) values based on a probabilistic Monte Carlo approach. Using this workflow, we corrected BHTs from over 300 hydrocarbon and geothermal wells and predicted the natural temperature field inside the study area. The resulting temperature model is based on risk scenarios and contains a range of uncertainty, the extent of which depends on the uncertainty of the correction input parameters at the individual locations.To study the short-term and long-term thermal behavior in the reservoir and the wellbore during production conditions, in 2019, a fiber optic cable was installed below the pump into the reservoir of a geothermal production well. We used distributed temperature sensing (DTS) to observe the hydraulically active zones and to thermally derive their contribution to the available heat amount.The knowledge gained underlines the importance of flow zone characterization and can be used to improve existing temperature models and estimate what temperatures can really be expected during extraction.