Xiaopeng Li
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Xiaopeng Li has a total of 54 co-authors. Here are the top co-authors by number of shared publications:
- Heguo Li
State Key Laboratory of NBC Protection for Civilian, Institute of Chemical Defense, Beijing 100191, China
9 shared publications - Min Zhang
State Key Laboratory of NBC Protection for Civilian, Institute of Chemical Defense, Beijing 100191, China
5 shared publications - Yue Zhao
State Key Laboratory of NBC Protection for Civilian, Institute of Chemical Defense, Beijing 100191, China
5 shared publications - Zenghe Li
College of Chemistry Beijing University of Chemical Technology Beijing P. R. China
3 shared publications - Zuohui Ji
Research Institute of Aerospace Special Materials and Processing Technology, Beijing 100074, China
3 shared publications - Shouxin Zhang
State Key Laboratory of NBC Protection for Civilian
2 shared publications
Latest Publications
- Open Access
Polymers for Detecting or Protecting Against Chemical Warfare Agents: Recent Advances and Future Perspectives
The persistent threat of chemical warfare agents (CWAs) drives the need for advanced detection and protective technologies. Polymers, with their tunable structures, ease of functionalization, and lightweight nature, have emerged as a versatile platform in this field. This review systematically summarizes recent progress in polymer-based materials for CWA sensing and protection, with emphasis on interaction mechanisms and structure–property relationships. In the realm of sensing, the working principles of polymer-based systems are rooted in electron transfer, hydrogen bonding, fluorescence quenching, and colorimetric response. Conductive polymers enable chemiresistive detection through charge transfer; hydrogen-bond acidic polymers provide selective recognition of organophosphorus agents; conjugated polymers exploit fluorescence quenching via the “molecular wire” effect; and polydiacetylenes offer visible color changes for naked-eye detection. Representative materials and their performance metrics are critically compared. For protection and decontamination, current polymer systems are designed around four synergistic mechanisms: barrier action, physical adsorption, filtration, and catalytic degradation. Barrier layers based on crosslinked networks or graphene/MOF composites suppress agent permeation while maintaining breathability. Porous polymers such as polymers of intrinsic microporosity (PIMs) and coordination polymers provide high-capacity adsorption through tailored surface functionality. Electrospun nanofiber membranes effectively filter aerosolized agents with low air resistance. Catalytic composites incorporating Zr-MOFs or single-atom catalysts enable hydrolysis of nerve agents and oxidation of blister agents under ambient conditions, with recent advances achieving self-buffering and solid-state operation. Despite significant advances, challenges remain in selectivity, environmental stability, and balancing protection with wearer comfort. Future directions point toward multifunctional systems that integrate detection, protection, and self-detoxification within wearable polymer platforms for next-generation chemical defense.
Open AccessPolymers for Detecting or Protecting Against Chemical Warfare Agents: Recent Advances and Future Perspectives
The persistent threat of chemical warfare agents (CWAs) drives the need for advanced detection and protective technologies. Polymers, with their tunable structures, ease of functionalization, and lightweight nature, have emerged as a versatile platform in this field. This review systematically summarizes recent progress in polymer-based materials for CWA sensing and protection, with emphasis on interaction mechanisms and structure–property relationships. In the realm of sensing, the working principles of polymer-based systems are rooted in electron transfer, hydrogen bonding, fluorescence quenching, and colorimetric response. Conductive polymers enable chemiresistive detection through charge transfer; hydrogen-bond acidic polymers provide selective recognition of organophosphorus agents; conjugated polymers exploit fluorescence quenching via the “molecular wire” effect; and polydiacetylenes offer visible color changes for naked-eye detection. Representative materials and their performance metrics are critically compared. For protection and decontamination, current polymer systems are designed around four synergistic mechanisms: barrier action, physical adsorption, filtration, and catalytic degradation. Barrier layers based on crosslinked networks or graphene/MOF composites suppress agent permeation while maintaining breathability. Porous polymers such as polymers of intrinsic microporosity (PIMs) and coordination polymers provide high-capacity adsorption through tailored surface functionality. Electrospun nanofiber membranes effectively filter aerosolized agents with low air resistance. Catalytic composites incorporating Zr-MOFs or single-atom catalysts enable hydrolysis of nerve agents and oxidation of blister agents under ambient conditions, with recent advances achieving self-buffering and solid-state operation. Despite significant advances, challenges remain in selectivity, environmental stability, and balancing protection with wearer comfort. Future directions point toward multifunctional systems that integrate detection, protection, and self-detoxification within wearable polymer platforms for next-generation chemical defense.
- 1 January 2026
- Published by Engineered Science Publisher in Engineered Science
Integrating Molecular Simulations, Interpretable Machine Learning and Metal-Organic Framework Identifier Analysis for the Discovery of Hydrophobic Metal-Organic Frameworks with High Adsorption Capacity for Sulfur Mustard Simulants
A data-driven framework combining simulations, machine learning, and metal-organic framework identifier reveals structural features governing toxic simulant adsorption in metal-organic frameworks.
- 1 January 2026
- Published by Engineered Science Publisher in Engineered Science
Integrating Molecular Simulations, Interpretable Machine Learning and Metal-Organic Framework Identifier Analysis for the Discovery of Hydrophobic Metal-Organic Frameworks with High Adsorption Capacity for Sulfur Mustard Simulants
A data-driven framework combining simulations, machine learning, and metal-organic framework identifier reveals structural features governing toxic simulant adsorption in metal-organic frameworks.
- Top Cited PapersOpen Access
- 20 November 2025
- Published by Frontiers Media SA in Frontiers in Materials
- Vol. 12, 1672938
Polymer-based nuclear radiation shielding materials: state-of-the-art and emerging trends for engineering applications
The continuous advancement of science and technology has led to the widespread application of nuclear technology across a diverse spectrum of fields, including scientific research, industrial processes, and particularly the medical domain for diagnostics and therapeutics. This proliferation, while beneficial, necessitates stringent protective measures for personnel who may be exposed to various forms of ionizing radiation, such as X-rays, γ-rays, and neutrons. In this context, polymer-based composite materials have emerged as a pivotal class of shielding solutions. These materials are typically fabricated by incorporating functional fillers—containing elements with high atomic numbers for photon attenuation or neutron-absorbing isotopes—into a continuous polymer matrix. This design strategy synergizes the processability and lightweight nature of polymers with the superior radiation shielding efficacy of the dispersed fillers, thereby offering robust and adaptable protection for individuals in nuclear-related occupations. This paper provides a comprehensive analysis of this material system. It begins by elucidating the fundamental attenuation and shielding mechanisms that govern the interaction of radiation with matter, establishing the theoretical foundation for material design. Subsequently, the paper offers a detailed review of the development history and recent research progress in polymer-based radiation shielding, tracing its evolution from conventional lead-impregnated rubbers to modern nanocomposites. The current research status of various material types is systematically summarized, highlighting technical achievements and innovative breakthroughs, such as the use of multi-layered structures or hybrid fillers. Furthermore, the paper analyzes the critical selection criteria for polymer matrices, considering factors like radiation resistance, thermal stability, and mechanical properties. Finally, it synthesizes the key challenges that remain to be addressed in current materials and provides a forward-looking perspective on future development directions, aiming to guide subsequent research and development efforts in this critical field.
- 20 November 2025
- Published by Frontiers Media SA in Frontiers in Materials
- Vol. 12, 1672938
Top Cited PapersOpen AccessPolymer-based nuclear radiation shielding materials: state-of-the-art and emerging trends for engineering applications
The continuous advancement of science and technology has led to the widespread application of nuclear technology across a diverse spectrum of fields, including scientific research, industrial processes, and particularly the medical domain for diagnostics and therapeutics. This proliferation, while beneficial, necessitates stringent protective measures for personnel who may be exposed to various forms of ionizing radiation, such as X-rays, γ-rays, and neutrons. In this context, polymer-based composite materials have emerged as a pivotal class of shielding solutions. These materials are typically fabricated by incorporating functional fillers—containing elements with high atomic numbers for photon attenuation or neutron-absorbing isotopes—into a continuous polymer matrix. This design strategy synergizes the processability and lightweight nature of polymers with the superior radiation shielding efficacy of the dispersed fillers, thereby offering robust and adaptable protection for individuals in nuclear-related occupations. This paper provides a comprehensive analysis of this material system. It begins by elucidating the fundamental attenuation and shielding mechanisms that govern the interaction of radiation with matter, establishing the theoretical foundation for material design. Subsequently, the paper offers a detailed review of the development history and recent research progress in polymer-based radiation shielding, tracing its evolution from conventional lead-impregnated rubbers to modern nanocomposites. The current research status of various material types is systematically summarized, highlighting technical achievements and innovative breakthroughs, such as the use of multi-layered structures or hybrid fillers. Furthermore, the paper analyzes the critical selection criteria for polymer matrices, considering factors like radiation resistance, thermal stability, and mechanical properties. Finally, it synthesizes the key challenges that remain to be addressed in current materials and provides a forward-looking perspective on future development directions, aiming to guide subsequent research and development efforts in this critical field.
- Open Access
Surface Modification of Poly(ethylene-alt-tetrafluoroethylene) by Atmospheric Pressure Dielectric Barrier Discharge Plasma
The fluororesin membrane emerges as an ideal chemical-protective clothing material due to its excellent permeation resistance. However, using a fluororesin membrane with a low surface energy for compounding fabrics is very challenging. Herein, we demonstrate a strategy to modify the surface of a poly(ethylene-alt-tetrafluoroethylene) (ETFE) membrane by the atmospheric pressure dielectric barrier discharge (DBD) of plasma under different working voltages, processing times, and concentrations of acrylic acid (AA) in a helium (He) atmosphere. The increase in the hydrophilicity of the ETFE membrane is confirmed by the wettability test, which shows a significant decrease in the water contact angle, from 96° to 50°, after plasma modification. The interfacial T-peel strength of an ETFE membrane composited with polyester fabric increased from 0.53 N/cm to 13.64 N/cm after plasma modification. Significantly, the T-peel strength of the composite using a modified ETFE membrane with ultrasonic washing could still reach 11.75 N/cm. Various characterization methods clearly disclosed the physical and chemical changes on the ETFE membrane surface, such as introducing the polar -COOH group at a nano-level, improving the roughness, decreasing the ratios of the F/C element, and increasing the ratios of the O/C element, suggesting using nano-level grafted polyacrylic acid (g-PAA) on the surface of the membrane by DBD.
Open AccessSurface Modification of Poly(ethylene-alt-tetrafluoroethylene) by Atmospheric Pressure Dielectric Barrier Discharge Plasma
The fluororesin membrane emerges as an ideal chemical-protective clothing material due to its excellent permeation resistance. However, using a fluororesin membrane with a low surface energy for compounding fabrics is very challenging. Herein, we demonstrate a strategy to modify the surface of a poly(ethylene-alt-tetrafluoroethylene) (ETFE) membrane by the atmospheric pressure dielectric barrier discharge (DBD) of plasma under different working voltages, processing times, and concentrations of acrylic acid (AA) in a helium (He) atmosphere. The increase in the hydrophilicity of the ETFE membrane is confirmed by the wettability test, which shows a significant decrease in the water contact angle, from 96° to 50°, after plasma modification. The interfacial T-peel strength of an ETFE membrane composited with polyester fabric increased from 0.53 N/cm to 13.64 N/cm after plasma modification. Significantly, the T-peel strength of the composite using a modified ETFE membrane with ultrasonic washing could still reach 11.75 N/cm. Various characterization methods clearly disclosed the physical and chemical changes on the ETFE membrane surface, such as introducing the polar -COOH group at a nano-level, improving the roughness, decreasing the ratios of the F/C element, and increasing the ratios of the O/C element, suggesting using nano-level grafted polyacrylic acid (g-PAA) on the surface of the membrane by DBD.
- Open Access
- 24 January 2025
- Published by MDPI AG in Nanomaterials
- Vol. 15 (3) , 183
A Multi-Method Approach to Analyzing MOFs for Chemical Warfare Simulant Capture: Molecular Simulation, Machine Learning, and Molecular Fingerprints
Mustard gas (HD) is a well-known chemical warfare agent, recognized for its extreme toxicity and severe hazards. Metal–organic frameworks (MOFs), with their unique structural properties, show significant potential for HD adsorption applications. Due to the extreme hazards of HD, most experimental studies focus on its simulants, but molecular simulation research on these simulants remains limited. Simulation analyses of simulants can uncover structure–performance relationships and enable experimental validation, optimizing methods, and improving material design and performance predictions. This study integrates molecular simulations, machine learning (ML), and molecular fingerprinting (MFs) to identify MOFs with high adsorption performance for the HD simulant diethyl sulfide (DES), followed by in-depth structural analysis and comparison. First, MOFs are categorized into Top, Middle, and Bottom materials based on their adsorption efficiency. Univariate analysis, machine learning, and molecular fingerprinting are then used to identify and compare the distinguishing features and fingerprints of each category. Univariate analysis helps identify the optimal structural ranges of Top and Bottom materials, providing a reference for initial material screening. Machine learning feature importance analysis, combined with SHAP methods, identifies the key features that most significantly influence model predictions across categories, offering valuable insights for future material design. Molecular fingerprint analysis reveals critical fingerprint combinations, showing that adsorption performance is optimized when features such as metal oxides, nitrogen-containing heterocycles, six-membered rings, and C=C double bonds co-exist. The integrated analysis using HTCS, ML, and MFs provides new perspectives for designing high-performance MOFs and demonstrates significant potential for developing materials for the adsorption of CWAs and their simulants.
- 24 January 2025
- Published by MDPI AG in Nanomaterials
- Vol. 15 (3) , 183
Open AccessA Multi-Method Approach to Analyzing MOFs for Chemical Warfare Simulant Capture: Molecular Simulation, Machine Learning, and Molecular Fingerprints
Mustard gas (HD) is a well-known chemical warfare agent, recognized for its extreme toxicity and severe hazards. Metal–organic frameworks (MOFs), with their unique structural properties, show significant potential for HD adsorption applications. Due to the extreme hazards of HD, most experimental studies focus on its simulants, but molecular simulation research on these simulants remains limited. Simulation analyses of simulants can uncover structure–performance relationships and enable experimental validation, optimizing methods, and improving material design and performance predictions. This study integrates molecular simulations, machine learning (ML), and molecular fingerprinting (MFs) to identify MOFs with high adsorption performance for the HD simulant diethyl sulfide (DES), followed by in-depth structural analysis and comparison. First, MOFs are categorized into Top, Middle, and Bottom materials based on their adsorption efficiency. Univariate analysis, machine learning, and molecular fingerprinting are then used to identify and compare the distinguishing features and fingerprints of each category. Univariate analysis helps identify the optimal structural ranges of Top and Bottom materials, providing a reference for initial material screening. Machine learning feature importance analysis, combined with SHAP methods, identifies the key features that most significantly influence model predictions across categories, offering valuable insights for future material design. Molecular fingerprint analysis reveals critical fingerprint combinations, showing that adsorption performance is optimized when features such as metal oxides, nitrogen-containing heterocycles, six-membered rings, and C=C double bonds co-exist. The integrated analysis using HTCS, ML, and MFs provides new perspectives for designing high-performance MOFs and demonstrates significant potential for developing materials for the adsorption of CWAs and their simulants.
- Open Access
Preparation of Thermal Conductivity-Enhanced, Microencapsulated Phase Change Materials Using Cellulose-Assisted Graphene Dispersion for Thermal Regulation in Textiles
To improve the poor thermal conductivity of microencapsulated phase change materials (MPCMs), a strategy was designed with effective combinations between graphene nanosheets (GNs) and shells to prepare thermally conductive MPCMs–GNs by using cellulose nanofibers (CNFs) to assist GN dispersion. The experiments and theoretical calculations both illustrated that CNFs effectively prevented GNs from aggregating due to the strong Van der Walls interactions between CNFs and GNs. The morphologies and structures of MPCMs with and without GNs were characterized by SEM, FTIR and XRD. The thermal properties of MPCMs were evaluated by DSC, TG, and a thermal conductivity test. The MPCMs with 10 wt.% GNs exhibited a melting enthalpy as high as 187.2 J/g and a thermal conductivity as high as 1.214 (W/m⋅K). The results indicate that the prepared MPCMs possessed a good thermal stability. In addition, MPCMs–GNs exhibited outstanding mechanical properties using a nano-indentation test. With an excellent melting enthalpy and thermal conductivity, the prepared MPCMs–GNs/textile showed a potential ability to be used for comfort thermal regulation.
Open AccessPreparation of Thermal Conductivity-Enhanced, Microencapsulated Phase Change Materials Using Cellulose-Assisted Graphene Dispersion for Thermal Regulation in Textiles
To improve the poor thermal conductivity of microencapsulated phase change materials (MPCMs), a strategy was designed with effective combinations between graphene nanosheets (GNs) and shells to prepare thermally conductive MPCMs–GNs by using cellulose nanofibers (CNFs) to assist GN dispersion. The experiments and theoretical calculations both illustrated that CNFs effectively prevented GNs from aggregating due to the strong Van der Walls interactions between CNFs and GNs. The morphologies and structures of MPCMs with and without GNs were characterized by SEM, FTIR and XRD. The thermal properties of MPCMs were evaluated by DSC, TG, and a thermal conductivity test. The MPCMs with 10 wt.% GNs exhibited a melting enthalpy as high as 187.2 J/g and a thermal conductivity as high as 1.214 (W/m⋅K). The results indicate that the prepared MPCMs possessed a good thermal stability. In addition, MPCMs–GNs exhibited outstanding mechanical properties using a nano-indentation test. With an excellent melting enthalpy and thermal conductivity, the prepared MPCMs–GNs/textile showed a potential ability to be used for comfort thermal regulation.
- Open Access
Design and Computational Validation of γ-Ray Shielding Effectiveness in Heavy Metal/Rare Earth Oxide–Natural Rubber Composites
This study involved the preparation of natural rubber-based composites incorporating varying proportions of heavy metals and rare earth oxides (Sm2O3, Ta2O5, and Bi2O3). The investigation analyzed several parameters of the samples, including mass attenuation coefficients (general, photoelectric absorption, and scattering), linear attenuation coefficients (μ), half-value layers (HVLs), tenth-value layers (TVLs), mean free paths (MFPs), and radiation protection efficiencies (RPEs), utilizing the Monte Carlo simulation software Geant4 and the WinXCom database across a gamma-ray energy spectrum of 40–150 keV. The study also compared the computational discrepancies among these measurements. Compared to rubber composites doped with single-component fillers, multi-component mixed shielding materials significantly mitigate the shielding deficiencies observed with single-component materials, thereby broadening the γ-ray energy spectrum for which the composites provide effective shielding. Subsequently, the simulation outcomes were juxtaposed with experimental data derived from a 133Ba (80 keV) γ-source. The findings reveal that the simulated results align closely with the experimental observations. When compared to the WinXCom database, the Geant4 software demonstrates superior accuracy in deriving radiation shielding parameters and notably enhances experimental efficiency.
Open AccessDesign and Computational Validation of γ-Ray Shielding Effectiveness in Heavy Metal/Rare Earth Oxide–Natural Rubber Composites
This study involved the preparation of natural rubber-based composites incorporating varying proportions of heavy metals and rare earth oxides (Sm2O3, Ta2O5, and Bi2O3). The investigation analyzed several parameters of the samples, including mass attenuation coefficients (general, photoelectric absorption, and scattering), linear attenuation coefficients (μ), half-value layers (HVLs), tenth-value layers (TVLs), mean free paths (MFPs), and radiation protection efficiencies (RPEs), utilizing the Monte Carlo simulation software Geant4 and the WinXCom database across a gamma-ray energy spectrum of 40–150 keV. The study also compared the computational discrepancies among these measurements. Compared to rubber composites doped with single-component fillers, multi-component mixed shielding materials significantly mitigate the shielding deficiencies observed with single-component materials, thereby broadening the γ-ray energy spectrum for which the composites provide effective shielding. Subsequently, the simulation outcomes were juxtaposed with experimental data derived from a 133Ba (80 keV) γ-source. The findings reveal that the simulated results align closely with the experimental observations. When compared to the WinXCom database, the Geant4 software demonstrates superior accuracy in deriving radiation shielding parameters and notably enhances experimental efficiency.
- Open Access
Boosted Chemical Protective Properties Using Interface Constructed between Ti3C2Tx MXene and Natural Rubber
Rubbers are extensively applied in chemical protective clothing (CPC) due to their eye-catching anti-penetration of chemicals. However, their impermeability, particularly that of natural rubber (NR), is unsatisfactory. In this work, we demonstrate the facile construction of Ti3C2Tx MXene/NR interface using a plant-scale and feasible method combining latex mixing, emulsion flocculation, and flat-plate vulcanisation. The above crafts achieved a homogeneous dispersion of Ti3C2Tx MXene in the NR matrix in a single layer, thereby constructing a strong interfacial interaction between Ti3C2Tx MXene and NR, which induced the formation of a robust three-dimensional (3D) network in the composite. The anti-swelling capacity of the 3D cross-linked network structure and the layered structure of Ti3C2Tx MXene effectively prolonged the permeation path of toxic chemicals. Compared with pure NR, the nanocomposite with 1 wt% of Ti3C2Tx MXene showed substantially enhanced breakthrough times of toluene, dichloromethane, and concentrated sulfuric acid (increased by 140%, 178.6%, and 92.5%, respectively). Furthermore, its tensile strength, elongation at break, and shore hardness increased by 7.847 MPa, 194%, and 12 HA, respectively. Taken together with the satisfactory anti-permeability, tensile strength, elongation at break, and shore hardness, the resulting Ti3C2Tx MXene/NR nanocomposites hold promise for application to long-term and high-strength CPC in the chemical industry and military fields.
Open AccessBoosted Chemical Protective Properties Using Interface Constructed between Ti3C2Tx MXene and Natural Rubber
Rubbers are extensively applied in chemical protective clothing (CPC) due to their eye-catching anti-penetration of chemicals. However, their impermeability, particularly that of natural rubber (NR), is unsatisfactory. In this work, we demonstrate the facile construction of Ti3C2Tx MXene/NR interface using a plant-scale and feasible method combining latex mixing, emulsion flocculation, and flat-plate vulcanisation. The above crafts achieved a homogeneous dispersion of Ti3C2Tx MXene in the NR matrix in a single layer, thereby constructing a strong interfacial interaction between Ti3C2Tx MXene and NR, which induced the formation of a robust three-dimensional (3D) network in the composite. The anti-swelling capacity of the 3D cross-linked network structure and the layered structure of Ti3C2Tx MXene effectively prolonged the permeation path of toxic chemicals. Compared with pure NR, the nanocomposite with 1 wt% of Ti3C2Tx MXene showed substantially enhanced breakthrough times of toluene, dichloromethane, and concentrated sulfuric acid (increased by 140%, 178.6%, and 92.5%, respectively). Furthermore, its tensile strength, elongation at break, and shore hardness increased by 7.847 MPa, 194%, and 12 HA, respectively. Taken together with the satisfactory anti-permeability, tensile strength, elongation at break, and shore hardness, the resulting Ti3C2Tx MXene/NR nanocomposites hold promise for application to long-term and high-strength CPC in the chemical industry and military fields.
- Open Access
Non-Toxic and Flexible Radiation-Shielding Composites Based on Natural Rubber Containing Elemental W Fillers for Efficient Shielding against X/γ-rays
Conventional radiation-shielding composites usually contain lead, which results in high toxicity and poor portability. Tungsten (W) is an ideal radiation-shielding element that can replace lead due to its high atomic number and non-toxicity. In this work, radiation-shielding composites were prepared using natural rubber (NR) as a matrix and three different particle size powders, namely W, WO3 and WC, as fillers. The results show that, for X-rays, the linear attenuation coefficient of radiation-shielding composites based on natural rubber containing WC with a particle size of 50 μm (50 WC/NR) is 27.005 cm−1 at an X-ray tube voltage of 40 kV, which is more than 14 times the linear attenuation coefficient of NR. For γ-rays, a linear attenuation coefficient of 50 WC/NR achieves 8.320 cm−1 at 81 keV, which is over 55 times the linear attenuation coefficient of NR. In addition, 50 WC/NR had the highest elongation at break at 548.989% and had the lowest hardness at 62 HA. In summary, 50 WC/NR can be used as an alternative to traditional radiation-shielding materials containing lead and has wide application prospects.
Open AccessNon-Toxic and Flexible Radiation-Shielding Composites Based on Natural Rubber Containing Elemental W Fillers for Efficient Shielding against X/γ-rays
Conventional radiation-shielding composites usually contain lead, which results in high toxicity and poor portability. Tungsten (W) is an ideal radiation-shielding element that can replace lead due to its high atomic number and non-toxicity. In this work, radiation-shielding composites were prepared using natural rubber (NR) as a matrix and three different particle size powders, namely W, WO3 and WC, as fillers. The results show that, for X-rays, the linear attenuation coefficient of radiation-shielding composites based on natural rubber containing WC with a particle size of 50 μm (50 WC/NR) is 27.005 cm−1 at an X-ray tube voltage of 40 kV, which is more than 14 times the linear attenuation coefficient of NR. For γ-rays, a linear attenuation coefficient of 50 WC/NR achieves 8.320 cm−1 at 81 keV, which is over 55 times the linear attenuation coefficient of NR. In addition, 50 WC/NR had the highest elongation at break at 548.989% and had the lowest hardness at 62 HA. In summary, 50 WC/NR can be used as an alternative to traditional radiation-shielding materials containing lead and has wide application prospects.
- Open Access
Surface Modification of ETFE Membrane and PTFE Membrane by Atmospheric DBD Plasma
Fluorine resin membranes with excellent chemical resistance have great potential for the application of high-performance chemical protective clothing. However, it is difficult to integrate fluorine resins into other materials such as fabrics due to their lower surface energy and poor bondability, making the fabrication of composite fabrics and the further seal splicing challenging. In this study, atmospheric pressure dielectric barrier discharge (DBD) plasma in helium (He) and helium/acrylic acid (He/AA) mixture atmospheres were used to modify two kinds of fluorine resins, ethylene tetrafluoroethylene (ETFE) and polytetrafluoroethylene (PTFE) membrane. The surface chemical properties, physical morphology, hydrophilicity and adhesion strength of the fluororesin membranes before and after plasma treatments were systematically analyzed. The results showed that the plasma treatment can modify the membrane surface at the nanoscale level without damaging the main body of the membrane. The hydrophilicity of the plasma-treated membrane was improved with the water contact angle decreasing from 95.83° to 49.9° for the ETFE membrane and from 109.9° to 67.8° for the PTFE membrane, respectively. The He plasma creates active sites on the membrane surface as well as etching the membrane surface, increasing the surface roughness. The He/AA plasma treatment introduces two types of polyacrylic acid (PAA)—deposited polyacrylic acid (d-PAA) and grafted polyacrylic acid (g-PAA)—on the membrane surface. Even after ultrasonic washing with acetone, g-PAA still existed stably and, as a result, improved the polarity and adhesion strength of fluororesin membranes. This work provides useful insights into the modification mechanism of DBD plasma on fluorine resins, with implications for developing effective strategies of integrating fluorine resin membrane to chemical protective clothing fabrics.
Open AccessSurface Modification of ETFE Membrane and PTFE Membrane by Atmospheric DBD Plasma
Fluorine resin membranes with excellent chemical resistance have great potential for the application of high-performance chemical protective clothing. However, it is difficult to integrate fluorine resins into other materials such as fabrics due to their lower surface energy and poor bondability, making the fabrication of composite fabrics and the further seal splicing challenging. In this study, atmospheric pressure dielectric barrier discharge (DBD) plasma in helium (He) and helium/acrylic acid (He/AA) mixture atmospheres were used to modify two kinds of fluorine resins, ethylene tetrafluoroethylene (ETFE) and polytetrafluoroethylene (PTFE) membrane. The surface chemical properties, physical morphology, hydrophilicity and adhesion strength of the fluororesin membranes before and after plasma treatments were systematically analyzed. The results showed that the plasma treatment can modify the membrane surface at the nanoscale level without damaging the main body of the membrane. The hydrophilicity of the plasma-treated membrane was improved with the water contact angle decreasing from 95.83° to 49.9° for the ETFE membrane and from 109.9° to 67.8° for the PTFE membrane, respectively. The He plasma creates active sites on the membrane surface as well as etching the membrane surface, increasing the surface roughness. The He/AA plasma treatment introduces two types of polyacrylic acid (PAA)—deposited polyacrylic acid (d-PAA) and grafted polyacrylic acid (g-PAA)—on the membrane surface. Even after ultrasonic washing with acetone, g-PAA still existed stably and, as a result, improved the polarity and adhesion strength of fluororesin membranes. This work provides useful insights into the modification mechanism of DBD plasma on fluorine resins, with implications for developing effective strategies of integrating fluorine resin membrane to chemical protective clothing fabrics.