Serhii Dovholap
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Serhii Dovholap has a total of 21 co-authors. Here are the top co-authors by number of shared publications:
- Olena Ivanenko
National Technical University of Ukraine “Igor Sikorsky Kyiv Polytechnic Institute
7 shared publications - Sergii Plashykhin
National Technical University of Ukraine “Igor Sikorsky Kyiv Polytechnic Institute
3 shared publications - Tetyana Overchenko
Національний технічний університет України «Київський політехнічний інститут імені Ігоря Сікорського
3 shared publications - Andrii I. Trypolskyi
Department of Heterogeneous Catalysis, L.V. Pisarzhevsky Institute of Physical Chemistry, National Academy of Sciences of Ukraine, 31 Nauky Ave., 03028 Kyiv, Ukraine
2 shared publications - Anton Karvatskii
National Technical University of Ukraine “Igor Sikorsky Kyiv Polytechnic Institute
2 shared publications - I. O. Mikulionok
National Technical University of Ukraine “Igor Sikorsky Kyiv Polytechnic Institute”; The Gas Institute of the National Academy of Sciences of Ukraine
2 shared publications
Latest Publications
- Open Access
- 27 May 2024
- Published by OU Scientific Route in EUREKA: Physics and Engineering
- No. 3,p. 17-35
Development of an innovative catalyst for neutralization of carbon monoxide in multi-chamber kilns of electrode blanks
The article outlines the possibility of achieving a comprehensive solution to environmental problems, specifically by neutralizing toxic carbon monoxide and treating wastewater generated during metallurgical production. The use of spent iron sulfate-containing etching solutions allows the creation of effective and affordable manganese-ferrite catalyst systems on a zeolite carrier. The novelty of the study is the use of "green" chemicals – ferrates that include iron (VI) and have great potential in environmentally friendly water treatment technologies. The use of potassium ferrate reduces the need for an alkaline reagent to produce a ferritic material. Confirmation of the composition of the main elements of catalysts was carried out using qualitative X-ray phase and micro-X-ray spectral analysis. The use of an innovative manganese-ferrite catalyst to neutralize carbon monoxide obtained using potassium ferrate provides a successful solution to the problem of toxic gas emission in electrode manufacturing technology and creates pathways for the transition to a circular economy. The cost-effectiveness and environmental friendliness of using the proposed catalyst on a zeolites carrier in a reactor located in the fire channels of the chambers of the Riedhammer multi-chamber furnaces for burning electrode blanks are demonstrated. The preparation of a catalyst from spent sorbents for purifying manganese-containing natural water emphasizes its sustainable nature and contribution to solving environmental problems in the context of production processes. The safety of burial or storage in landfills of ferritic sludge sediments as an analog of magnetite distributed in the earth's crust further emphasizes the importance of the proposed method
- 27 May 2024
- Published by OU Scientific Route in EUREKA: Physics and Engineering
- No. 3,p. 17-35
Open AccessDevelopment of an innovative catalyst for neutralization of carbon monoxide in multi-chamber kilns of electrode blanks
The article outlines the possibility of achieving a comprehensive solution to environmental problems, specifically by neutralizing toxic carbon monoxide and treating wastewater generated during metallurgical production. The use of spent iron sulfate-containing etching solutions allows the creation of effective and affordable manganese-ferrite catalyst systems on a zeolite carrier. The novelty of the study is the use of "green" chemicals – ferrates that include iron (VI) and have great potential in environmentally friendly water treatment technologies. The use of potassium ferrate reduces the need for an alkaline reagent to produce a ferritic material. Confirmation of the composition of the main elements of catalysts was carried out using qualitative X-ray phase and micro-X-ray spectral analysis. The use of an innovative manganese-ferrite catalyst to neutralize carbon monoxide obtained using potassium ferrate provides a successful solution to the problem of toxic gas emission in electrode manufacturing technology and creates pathways for the transition to a circular economy. The cost-effectiveness and environmental friendliness of using the proposed catalyst on a zeolites carrier in a reactor located in the fire channels of the chambers of the Riedhammer multi-chamber furnaces for burning electrode blanks are demonstrated. The preparation of a catalyst from spent sorbents for purifying manganese-containing natural water emphasizes its sustainable nature and contribution to solving environmental problems in the context of production processes. The safety of burial or storage in landfills of ferritic sludge sediments as an analog of magnetite distributed in the earth's crust further emphasizes the importance of the proposed method
- Open Access
- 1 March 2024
- Published by Walter de Gruyter GmbH in Architecture, Civil Engineering, Environment
- Vol. 17 (1) , 83-90
Developmet the Complex Technology for Highly Concentrated Acid Solutions of Electroplating Industry
The paper presents the results of research on the application of ion-exchange processes for the extraction of iron (II) and copper (II) ions from liquid acid wastes of electroplating production. In the course of experimental studies, it was shown that with an increase in the concentration of sulfuric acid, the total exchangeable dynamic capacity (TEDC) of the cationite significantly decreases both during the sorption of iron ions and during the sorption of copper ions. At the same time, an increase in the iron (II) ions concentration leads to a significant increase in TEDC – even with a sulfuric acid concentration of 8–13 g/dm 3 , TEDC reached the level of 1.35 g-eq/dm 3 , which corresponds to the sorption level of neutral dilute solutions. However, it can be seen from the total concentration that the efficiency of sorption of metals from acidic solutions remains quite high and increases with the increase of the initial total content of sorbed ions. The main indicator used when choosing an ion exchange method is the possibility of effective regeneration of the cation exchange material. When using a 5% solution of sulfuric acid already at the specific consumption of the regeneration solution, it was possible to achieve a degree of regeneration at the level of 95–98%, and when using a 10% solution, the degree of regeneration reached 100%. According to the research results, a technological scheme for processing regeneration solutions by precipitation of metals from regeneration solutions into magnetites in a ferritizer reactor was proposed.
- 1 March 2024
- Published by Walter de Gruyter GmbH in Architecture, Civil Engineering, Environment
- Vol. 17 (1) , 83-90
Open AccessDevelopmet the Complex Technology for Highly Concentrated Acid Solutions of Electroplating Industry
The paper presents the results of research on the application of ion-exchange processes for the extraction of iron (II) and copper (II) ions from liquid acid wastes of electroplating production. In the course of experimental studies, it was shown that with an increase in the concentration of sulfuric acid, the total exchangeable dynamic capacity (TEDC) of the cationite significantly decreases both during the sorption of iron ions and during the sorption of copper ions. At the same time, an increase in the iron (II) ions concentration leads to a significant increase in TEDC – even with a sulfuric acid concentration of 8–13 g/dm 3 , TEDC reached the level of 1.35 g-eq/dm 3 , which corresponds to the sorption level of neutral dilute solutions. However, it can be seen from the total concentration that the efficiency of sorption of metals from acidic solutions remains quite high and increases with the increase of the initial total content of sorbed ions. The main indicator used when choosing an ion exchange method is the possibility of effective regeneration of the cation exchange material. When using a 5% solution of sulfuric acid already at the specific consumption of the regeneration solution, it was possible to achieve a degree of regeneration at the level of 95–98%, and when using a 10% solution, the degree of regeneration reached 100%. According to the research results, a technological scheme for processing regeneration solutions by precipitation of metals from regeneration solutions into magnetites in a ferritizer reactor was proposed.
- Open Access
- 22 December 2023
- Published by Private Company Technology Center in Eastern-European Journal of Enterprise Technologies
- Vol. 6 (10 (126)) , 17-26
Devising a comprehensive technology for treating industrial iron sulfate-containing effluents of galvanic production
The object of the research is complex electrochemical and ferritic decontamination of iron sulfate-containing waters. Processing of liquid waste is carried out by electrochemical treatment using two- and three-chamber electrolyzers. This paper investigates the processes of electrodialysis purification of simulated solutions with an FeSO4 compound concentration of 5 g/dm3 and an H2SO4 compound concentration of 300–2100 mg-equiv/dm3. A plate made of stainless steel was used as the cathode, and a plate made of titanium covered with ruthenium oxide and lead was used as the anode. It is shown that the highest current yield of electrodialysis products of 84.5 % was obtained when using a three-chamber electrolyzer with MA-41 anion exchange membranes. It was found that when using the specified electrolyzer, the concentration gradient, the value of which is directly proportional to the difference in the concentrations of the initial solutions filled with the electrode chambers, has a significant effect on the process of separation of impurities. It is shown that for a two-chamber electrolyzer, the current output reaches 72 %, which is explained by the harmful effect of a significant concentration gradient and is manifested in the rapid mechanical blocking of the membrane and the slowing down of the ion migration process, as well as the increase in energy consumption. In a two-chamber electrolyzer, H2SO4 with a concentration of 18.3 % was obtained, which is suitable for repeated use in etching baths. It was found that as a result of electrodialysis separation and additional oxidation, it is advisable to use concentrated iron sulfate solutions for obtaining ferrite material of a crystalline structure with particle sizes of 2–20 μm. Within the framework of the circular economy, an ecologically safe technology for decontamination of industrial iron-containing sulfate solutions of galvanic production using a complex of electrodialysis and ferrite methods is proposed
- 22 December 2023
- Published by Private Company Technology Center in Eastern-European Journal of Enterprise Technologies
- Vol. 6 (10 (126)) , 17-26
Open AccessDevising a comprehensive technology for treating industrial iron sulfate-containing effluents of galvanic production
The object of the research is complex electrochemical and ferritic decontamination of iron sulfate-containing waters. Processing of liquid waste is carried out by electrochemical treatment using two- and three-chamber electrolyzers. This paper investigates the processes of electrodialysis purification of simulated solutions with an FeSO4 compound concentration of 5 g/dm3 and an H2SO4 compound concentration of 300–2100 mg-equiv/dm3. A plate made of stainless steel was used as the cathode, and a plate made of titanium covered with ruthenium oxide and lead was used as the anode. It is shown that the highest current yield of electrodialysis products of 84.5 % was obtained when using a three-chamber electrolyzer with MA-41 anion exchange membranes. It was found that when using the specified electrolyzer, the concentration gradient, the value of which is directly proportional to the difference in the concentrations of the initial solutions filled with the electrode chambers, has a significant effect on the process of separation of impurities. It is shown that for a two-chamber electrolyzer, the current output reaches 72 %, which is explained by the harmful effect of a significant concentration gradient and is manifested in the rapid mechanical blocking of the membrane and the slowing down of the ion migration process, as well as the increase in energy consumption. In a two-chamber electrolyzer, H2SO4 with a concentration of 18.3 % was obtained, which is suitable for repeated use in etching baths. It was found that as a result of electrodialysis separation and additional oxidation, it is advisable to use concentrated iron sulfate solutions for obtaining ferrite material of a crystalline structure with particle sizes of 2–20 μm. Within the framework of the circular economy, an ecologically safe technology for decontamination of industrial iron-containing sulfate solutions of galvanic production using a complex of electrodialysis and ferrite methods is proposed
- Open Access
- 10 December 2023
- Published by Kyiv National University of Construction and Architecture in Problems of Water supply, Sewerage and Hydraulic
- No. 45,p. 15-23
Change in dispersion of synthetic magnetite particles from the conditions of precipitation from iron sulfate-containing solutions
В роботі проаналізовано проблеми реагентного методу очищення стічних вод підприємств машинобудівного профілю, та наведені переваги магнітосорбційного методу в порівнянні з реагентним методом. Магнітосорбційний метод, заснований на обробці рідини часточками феромагнітного матеріалу з ціллю сорбції на їх поверхні речовин, які підлягають вилученню, добре себе зарекомендував не тільки в очищенні стічних вод від домішок важких металів, а й від нафтопродуктів, ПАР, радіоізотопів, завислих речовин. Ефективність процесів очистки води залежить від властивостей частинок сорбенту таких як дисперсність, сорбційна ємність і магнітні властивості частинок. В роботі наведені результати по дисперсності частинок. Проведені дослідження зміни дисперсності частинок синтетичного магнетиту, отриманих при різних умовах, таких як час зберігання, температура, рН, співвідношення К=[Fe2+]:[Fe3+], солевміст, природа осаджувача. Показано, що зі збільшенням часу зберігання кількість дрібних частинок менше 10 мкм зменшується, а великих – збільшується внаслідок проходження процесів рекристалізації. Визначено, що при 20 без впливу магнітного поля утворюється суспензія з максимальним вмістом частинок діаметром 10 мкм, при температурі 40 – 70 в суспензії переважають частинки з розміром 8 – 10 мкм, з підвищенням рН розчину кількість дрібних частинок в суспензії зростає. І, навпаки, зі збільшенням солевмісту крупність частинок збільшується зі зменшенням долі дрібних частинок майже вдвічі. Зазначено, що при К=0,8; 2,0 в розчині формується найбільша кількість частинок (біля 60 %) з розміром 10 мкм. Показано, що з використанням NaOH формується максимальна кількість частинок крупніше 20 мкм.
- 10 December 2023
- Published by Kyiv National University of Construction and Architecture in Problems of Water supply, Sewerage and Hydraulic
- No. 45,p. 15-23
Open AccessChange in dispersion of synthetic magnetite particles from the conditions of precipitation from iron sulfate-containing solutions
В роботі проаналізовано проблеми реагентного методу очищення стічних вод підприємств машинобудівного профілю, та наведені переваги магнітосорбційного методу в порівнянні з реагентним методом. Магнітосорбційний метод, заснований на обробці рідини часточками феромагнітного матеріалу з ціллю сорбції на їх поверхні речовин, які підлягають вилученню, добре себе зарекомендував не тільки в очищенні стічних вод від домішок важких металів, а й від нафтопродуктів, ПАР, радіоізотопів, завислих речовин. Ефективність процесів очистки води залежить від властивостей частинок сорбенту таких як дисперсність, сорбційна ємність і магнітні властивості частинок. В роботі наведені результати по дисперсності частинок. Проведені дослідження зміни дисперсності частинок синтетичного магнетиту, отриманих при різних умовах, таких як час зберігання, температура, рН, співвідношення К=[Fe2+]:[Fe3+], солевміст, природа осаджувача. Показано, що зі збільшенням часу зберігання кількість дрібних частинок менше 10 мкм зменшується, а великих – збільшується внаслідок проходження процесів рекристалізації. Визначено, що при 20 без впливу магнітного поля утворюється суспензія з максимальним вмістом частинок діаметром 10 мкм, при температурі 40 – 70 в суспензії переважають частинки з розміром 8 – 10 мкм, з підвищенням рН розчину кількість дрібних частинок в суспензії зростає. І, навпаки, зі збільшенням солевмісту крупність частинок збільшується зі зменшенням долі дрібних частинок майже вдвічі. Зазначено, що при К=0,8; 2,0 в розчині формується найбільша кількість частинок (біля 60 %) з розміром 10 мкм. Показано, що з використанням NaOH формується максимальна кількість частинок крупніше 20 мкм.
- Open Access
- 19 January 2023
- Published by OU Scientific Route in EUREKA: Physics and Engineering
- No. 1,p. 13-23
The development of carbon monoxide oxidation reactor for multi-chamber furnaces for baking electrode blanks
The article highlights the development of cheap affordable highly efficient catalytic oxidation system of harmful components of industrial flue gases of carbon graphite enterprises, its design features according to the parameters of furnace equipment, which will significantly improve the environmental safety of metallurgical and machine-building enterprises. The presented calculation and design solutions, in addition to carbon production, can be used in environmental protection technologies at other environmentally hazardous facilities to neutralize toxic emissions. The paper presents the calculation of the catalytic CO oxidation reactor made for the real flow rate of flue gases with temperature range 270−390 ºC, which come out of the combustion chamber of the Riedhammer "first fire" kiln, heated by the flue gases. For such medium exothermic processes, mass and heat transfer between gas flow and the outer surface of the catalyst grains is sufficient intense. In this case for description of the catalytic process in the reactor is sufficient to use quasi-homogeneous single-phase model. The model of plug-flow reactor with a fixed bed of catalyst was used to calculate the flow parameters of the gas mixture through a reactor loaded with a composite zeolite-based manganese-oxide catalyst in the process of catalytic CO oxidation. The calculation results obtained using the software CHEMCAD 7.1.5 were almost identical to the previously made calculation. The peculiarity of the suggested solution was the use of the designed catalytic reactor for treatment of large volume of flue gases with low concentrations of CO at the companies of electrode carbon graphite production
- 19 January 2023
- Published by OU Scientific Route in EUREKA: Physics and Engineering
- No. 1,p. 13-23
Open AccessThe development of carbon monoxide oxidation reactor for multi-chamber furnaces for baking electrode blanks
The article highlights the development of cheap affordable highly efficient catalytic oxidation system of harmful components of industrial flue gases of carbon graphite enterprises, its design features according to the parameters of furnace equipment, which will significantly improve the environmental safety of metallurgical and machine-building enterprises. The presented calculation and design solutions, in addition to carbon production, can be used in environmental protection technologies at other environmentally hazardous facilities to neutralize toxic emissions. The paper presents the calculation of the catalytic CO oxidation reactor made for the real flow rate of flue gases with temperature range 270−390 ºC, which come out of the combustion chamber of the Riedhammer "first fire" kiln, heated by the flue gases. For such medium exothermic processes, mass and heat transfer between gas flow and the outer surface of the catalyst grains is sufficient intense. In this case for description of the catalytic process in the reactor is sufficient to use quasi-homogeneous single-phase model. The model of plug-flow reactor with a fixed bed of catalyst was used to calculate the flow parameters of the gas mixture through a reactor loaded with a composite zeolite-based manganese-oxide catalyst in the process of catalytic CO oxidation. The calculation results obtained using the software CHEMCAD 7.1.5 were almost identical to the previously made calculation. The peculiarity of the suggested solution was the use of the designed catalytic reactor for treatment of large volume of flue gases with low concentrations of CO at the companies of electrode carbon graphite production
- Open Access
- 20 May 2021
- Published by Igor Sikorsky Kyiv Polytechnic Institute in Ecology, human, society
- p. 161-163
Use of chromium-ferrite catalyst for cleaning flue gases of metallurgical production
The work presents the results of the study of a carbon monoxide conversion catalyst based on gas concrete modified with chromium ferrite. The paper also described the environmental aspects of the negative impact of CO on the human body. The emission sources were analyzed and the existing ways of reducing CO emissions into the atomosphere were described. The raw material for the chromium-ferrite catalyst can be sludge from the treatment facilities of galvanic production, after the treatment of wastewater by the ferritic method. The process of chromium-ferritic catalyst production consisted in treatment of natural material with mixture of 0.028M K2Cr2O7 and 0.332M FeSO4 solutions during 1 h, after that the precipitate of chromium ferrite was precipitated on zeolite with 25% NH4OH solution. The experiments were carried out in an apparatus which included a thermal chamber in which a constant required temperature was maintained at 200-400 ° C. The volume rate of gas flow was 1-5 dm3 / min. The concentration of reaction products was analyzed with a gas analyzer. Immediately before the catalytic experiment the catalyst grains were heat-treated at 450°С for 2:00. As a result of the studies it was found that the maximum degree of oxidation of CO at 390 ° C was 82.4%. There was also a significant increase in oxidation efficiency observed from temperature 275 ° C to 325 ° C, there was a sharp jump in oxidation at 275 ° C from 55% to 73%, indicating the optimum temperature mode of use of chrome-ferrite catalyst in the temperature range from 325 ° C to 390 ° C.As a result of studies it was determined that chrome-ferrite catalyst is effective for conversion of flue gas CO and confirms the prospects of using ferrite with predetermined efficiency as catalyst. The advantages of this catalyst are its inertness and stability in the environment, will not create problems with disposal after use. Editorial note (2026): This abstract was prepared for reference purposes using artificial intelligence technology, based on the original publication, without the involvement of the author(s).
- 20 May 2021
- Published by Igor Sikorsky Kyiv Polytechnic Institute in Ecology, human, society
- p. 161-163
Open AccessUse of chromium-ferrite catalyst for cleaning flue gases of metallurgical production
The work presents the results of the study of a carbon monoxide conversion catalyst based on gas concrete modified with chromium ferrite. The paper also described the environmental aspects of the negative impact of CO on the human body. The emission sources were analyzed and the existing ways of reducing CO emissions into the atomosphere were described. The raw material for the chromium-ferrite catalyst can be sludge from the treatment facilities of galvanic production, after the treatment of wastewater by the ferritic method. The process of chromium-ferritic catalyst production consisted in treatment of natural material with mixture of 0.028M K2Cr2O7 and 0.332M FeSO4 solutions during 1 h, after that the precipitate of chromium ferrite was precipitated on zeolite with 25% NH4OH solution. The experiments were carried out in an apparatus which included a thermal chamber in which a constant required temperature was maintained at 200-400 ° C. The volume rate of gas flow was 1-5 dm3 / min. The concentration of reaction products was analyzed with a gas analyzer. Immediately before the catalytic experiment the catalyst grains were heat-treated at 450°С for 2:00. As a result of the studies it was found that the maximum degree of oxidation of CO at 390 ° C was 82.4%. There was also a significant increase in oxidation efficiency observed from temperature 275 ° C to 325 ° C, there was a sharp jump in oxidation at 275 ° C from 55% to 73%, indicating the optimum temperature mode of use of chrome-ferrite catalyst in the temperature range from 325 ° C to 390 ° C.As a result of studies it was determined that chrome-ferrite catalyst is effective for conversion of flue gas CO and confirms the prospects of using ferrite with predetermined efficiency as catalyst. The advantages of this catalyst are its inertness and stability in the environment, will not create problems with disposal after use. Editorial note (2026): This abstract was prepared for reference purposes using artificial intelligence technology, based on the original publication, without the involvement of the author(s).
- 1 January 2021
- Published by Admiral Makarov National University of Shipbuilding in Collection of Scientific Publications NUS
- No. 4,p. 82-91
INNOVATIVE TECHNOLOGIES OF FLUE GAS NEUTRALIZATION IN CARBON GRAPHITE PRODUCING UNITS
- 1 January 2021
- Published by Admiral Makarov National University of Shipbuilding in Collection of Scientific Publications NUS
- No. 4,p. 82-91
INNOVATIVE TECHNOLOGIES OF FLUE GAS NEUTRALIZATION IN CARBON GRAPHITE PRODUCING UNITS