Maya Puspitasari Izaak
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Maya Puspitasari Izaak has a total of 35 co-authors. Here are the top co-authors by number of shared publications:
- Yohanes Edi Gunanto
Department of Teacher Professional Program (PPG), Faculty of Education, Universitas Pelita Harapan, Tangerang, Indonesia
6 shared publications - Wisnu Ari Adi
Research Center for Energy Materials, National Research and Innovation Agency, Kawasan Sains Teknologi Habibie, Serpong, Indonesia
4 shared publications Henni Sitompul
University of Pelita Harapan
3 shared publications- Jan Setiawan
Research Center for Energy Materials, National Research and Innovation Agency (BRIN), South Tangerang, Indonesia
3 shared publications Ade Mulyawan
National Research and Innovation Agency
2 shared publications- Harun Sitompul
State University of Medan
2 shared publications
Latest Publications
- 25 July 2025
- Published by Wiley in Physica Status Solidi (a)
- Vol. 223 (2)
The Addition of Yttrium Ions Doping to Increase the Stability of Particle Size and its Effect on the Magnetic Properties and Reflection Loss in the Co 0.5 Ni 0.5 Ti (1− x ) Y x O 3
Yttrium‐doped nickel cobalt titanate with a nominal composition of Ni 0.5 Co 0.5 Ti (2‐ x ) Y x O 3 ( x = 0.0; 0.025; 0.050 and 0.075) is synthesized by the solid‐state reaction method using mechanical milling from NiO, Co 3 O 4 , Y 2 O 3 , and TiO 2 powders as raw materials in a mole ratio. The effect of Y 3+ doping on particle size stability, structural, magnetic properties, and microwave absorption characteristics of the perovskite Ni 0.5 Co 0.5 Ti (2‐ x ) Y x O 3 has been studied in this research. All samples are investigated using X‐ray diffraction, scanning electron microscope, energy dispersive spectroscopy, vibration sample magnetometer, and vector network analyzer. It is found that all samples show a single phase with a hexagonal structure. The presence of Y 3+ ions dopant can inhibit polygonal particles, and it is able to maintain the particle size stable. In contrast, this material's magnetic properties and microwave absorption capabilities do not experience significant changes with the presence of Y 3+ ions dopant.
- 25 July 2025
- Published by Wiley in Physica Status Solidi (a)
- Vol. 223 (2)
The Addition of Yttrium Ions Doping to Increase the Stability of Particle Size and its Effect on the Magnetic Properties and Reflection Loss in the Co 0.5 Ni 0.5 Ti (1− x ) Y x O 3
Yttrium‐doped nickel cobalt titanate with a nominal composition of Ni 0.5 Co 0.5 Ti (2‐ x ) Y x O 3 ( x = 0.0; 0.025; 0.050 and 0.075) is synthesized by the solid‐state reaction method using mechanical milling from NiO, Co 3 O 4 , Y 2 O 3 , and TiO 2 powders as raw materials in a mole ratio. The effect of Y 3+ doping on particle size stability, structural, magnetic properties, and microwave absorption characteristics of the perovskite Ni 0.5 Co 0.5 Ti (2‐ x ) Y x O 3 has been studied in this research. All samples are investigated using X‐ray diffraction, scanning electron microscope, energy dispersive spectroscopy, vibration sample magnetometer, and vector network analyzer. It is found that all samples show a single phase with a hexagonal structure. The presence of Y 3+ ions dopant can inhibit polygonal particles, and it is able to maintain the particle size stable. In contrast, this material's magnetic properties and microwave absorption capabilities do not experience significant changes with the presence of Y 3+ ions dopant.
- 17 June 2025
- Published by Trans Tech Publications, Ltd. in Materials Science Forum
- Vol. 1152, 39-44
Structural, Dielectric, and Magnetic Characterization of Ba0.6Sr0.4Fe11.50Al0.50O19/MoS2 Composite
In this paper, a Ba0.6Sr0.4Fe11.50Al0.50O19/MoS2 composite with a weight ratio of 1:9 has been successfully created. The Ba0.6Sr0.4Fe11.50Al0.50O19/MoS2 was synthesized in HEM for 35 hours before sintered at 1000°C for 5 hours. The Ba0.6Sr0.4Fe11.50Al0.50O19/MoS2 composite was characterized using XRD for phase formation, crystal structure, and lattice parameters. Based on the XRD results, the Ba0.6Sr0.4Fe11.50Al0.50O19/MoS2 composite has two phases with different crystal structures. SEM characterization for surface morphology and particle size. SEM results show heterogeneous particles, but the particle size is not uniform at 0.2-0.6 µm. Measurements of the dielectric constant and dielectric loss are shown as a function of frequency. VSM is used to characterize samples magnetically. The VSM results show ferromagnetic behaviour in the Ba0.6Sr0.4Fe11.50Al0.50O19/MoS2 composite with the value of Mr, Ms, and Hc are about 20 emu/g, 40.769 emu/g, and 4.08 kOe, respectively.
- 17 June 2025
- Published by Trans Tech Publications, Ltd. in Materials Science Forum
- Vol. 1152, 39-44
Structural, Dielectric, and Magnetic Characterization of Ba0.6Sr0.4Fe11.50Al0.50O19/MoS2 Composite
In this paper, a Ba0.6Sr0.4Fe11.50Al0.50O19/MoS2 composite with a weight ratio of 1:9 has been successfully created. The Ba0.6Sr0.4Fe11.50Al0.50O19/MoS2 was synthesized in HEM for 35 hours before sintered at 1000°C for 5 hours. The Ba0.6Sr0.4Fe11.50Al0.50O19/MoS2 composite was characterized using XRD for phase formation, crystal structure, and lattice parameters. Based on the XRD results, the Ba0.6Sr0.4Fe11.50Al0.50O19/MoS2 composite has two phases with different crystal structures. SEM characterization for surface morphology and particle size. SEM results show heterogeneous particles, but the particle size is not uniform at 0.2-0.6 µm. Measurements of the dielectric constant and dielectric loss are shown as a function of frequency. VSM is used to characterize samples magnetically. The VSM results show ferromagnetic behaviour in the Ba0.6Sr0.4Fe11.50Al0.50O19/MoS2 composite with the value of Mr, Ms, and Hc are about 20 emu/g, 40.769 emu/g, and 4.08 kOe, respectively.
- 19 May 2025
- Published by Trans Tech Publications, Ltd. in Solid State Phenomena
- Vol. 371, 121-130
Hard-Soft Magnetic Composite as Microwave Absorber in S-Band and C-Band
This research discusses synthesizing and characterizing magnetic hard-soft composite materials (Ba0.6Sr0.4Fe11.5Al0.5O19/NiFe2O4) applied as microwave absorbers at S-band and C-band frequencies. The mechanical alloying method for sample synthesis uses a high-energy ball mill and sintering at high temperatures. Characterization of the crystal structure was done using an X-ray diffractometer. The Ba0.6Sr0.4Fe11.5Al0.5O19 sample (hard magnetic) has a hexagonal structure, while the NiFe2O4 (soft magnetic) has a cubic structure. SEM analysis revealed a heterogeneous form with particle sizes ranging from 0.4 to 0.8 µm. Magnetization at room temperature was characterized using a vibrating-sample magnetometer (VSM). The magnetization saturation (Ms), magnetic remanent (Mr), and field coercivity (Hc) are 54.22 emu/g, 21.68 emu/g, and 0.876 kOe, respectively. Microwave absorption characterized using vector network analysis (VNA) shows that the hard-soft magnetic composite sample (Ba0.6Sr0.4Fe11.5Al0.5O19/NiFe2O4) has a minimum reflection loss (RLmin) value of -29.86 dB for the S-band and -18.76 dB for the C-band area with an effective bandwidth reaching 2.34 GHz.
- 19 May 2025
- Published by Trans Tech Publications, Ltd. in Solid State Phenomena
- Vol. 371, 121-130
Hard-Soft Magnetic Composite as Microwave Absorber in S-Band and C-Band
This research discusses synthesizing and characterizing magnetic hard-soft composite materials (Ba0.6Sr0.4Fe11.5Al0.5O19/NiFe2O4) applied as microwave absorbers at S-band and C-band frequencies. The mechanical alloying method for sample synthesis uses a high-energy ball mill and sintering at high temperatures. Characterization of the crystal structure was done using an X-ray diffractometer. The Ba0.6Sr0.4Fe11.5Al0.5O19 sample (hard magnetic) has a hexagonal structure, while the NiFe2O4 (soft magnetic) has a cubic structure. SEM analysis revealed a heterogeneous form with particle sizes ranging from 0.4 to 0.8 µm. Magnetization at room temperature was characterized using a vibrating-sample magnetometer (VSM). The magnetization saturation (Ms), magnetic remanent (Mr), and field coercivity (Hc) are 54.22 emu/g, 21.68 emu/g, and 0.876 kOe, respectively. Microwave absorption characterized using vector network analysis (VNA) shows that the hard-soft magnetic composite sample (Ba0.6Sr0.4Fe11.5Al0.5O19/NiFe2O4) has a minimum reflection loss (RLmin) value of -29.86 dB for the S-band and -18.76 dB for the C-band area with an effective bandwidth reaching 2.34 GHz.
- 12 November 2024
- Published by IOP Publishing in Physica Scripta
- Vol. 99 (12) , 125940
Improvement of microwave absorbing capability on the soft magnetic/hard magnetic/perovskite composites
This paper reports an increase in the ability to absorb microwaves from a composite made of combination between soft and hard magnetic materials, perovskite material, and an epoxy as matrix of composite, Ni0.5Zn0.5Fe2O4/Ba0.6Sr0.4Fe9.5Al0.5MnTiO19/FeTiO3/epoxy (NBFE) with a wt% ratio of 5:3:2:10. Composite samples were made using the mechanical alloying method with milling techniques and sintered at a temperature of 1000 °C for 5 h. NBFE composites were studied to increase the ability to absorb microwaves at 2–18 GHz frequencies with thickness variations of 1 mm and 2 mm. The results obtained, the composite sample Ni0.5Zn0.5Fe2O4/Ba0.6Sr0.4Fe9.5Al0.5MnTiO19/FeTiO3/epoxy has the ability to absorb microwaves with the best reflection loss value −37.47 dB with a bandwidth almost reaches 11.32 GHz in the 2–18 GHz frequency range.
- 12 November 2024
- Published by IOP Publishing in Physica Scripta
- Vol. 99 (12) , 125940
Improvement of microwave absorbing capability on the soft magnetic/hard magnetic/perovskite composites
This paper reports an increase in the ability to absorb microwaves from a composite made of combination between soft and hard magnetic materials, perovskite material, and an epoxy as matrix of composite, Ni0.5Zn0.5Fe2O4/Ba0.6Sr0.4Fe9.5Al0.5MnTiO19/FeTiO3/epoxy (NBFE) with a wt% ratio of 5:3:2:10. Composite samples were made using the mechanical alloying method with milling techniques and sintered at a temperature of 1000 °C for 5 h. NBFE composites were studied to increase the ability to absorb microwaves at 2–18 GHz frequencies with thickness variations of 1 mm and 2 mm. The results obtained, the composite sample Ni0.5Zn0.5Fe2O4/Ba0.6Sr0.4Fe9.5Al0.5MnTiO19/FeTiO3/epoxy has the ability to absorb microwaves with the best reflection loss value −37.47 dB with a bandwidth almost reaches 11.32 GHz in the 2–18 GHz frequency range.
- Open Access
- 3 January 2024
- Published by IOP Publishing in Physica Scripta
- Vol. 99 (2) , 025002
The Impact of Al3+ ion substitution on microwave absorption of hexaferrite compound Ba0.6Sr0.4Fe12−xAlxO19 (x = 0.25, 0.50, 0.75, and 1.00)
This paper discusses the impact of Al3+ ion substitution on Fe3+ ions in the hexaferrite compound Ba0.6Sr0.4Fe12−xAlxO19 on the reflection loss value and bandwidth in absorbing microwaves. Hexaferrite Ba0.6Sr0.4Fe12−xAlxO19 (x = 0.25, 0.50, 0.75, and 1.00) was synthesized by high-energy ball milling (HEBM) for forty hours, followed by sintering at 1000 °C in the air for five hours. Then, the crystal structure, formed phase, surface morphology, magnetization, and ability to absorb microwaves in the X-band region were successively characterized. All samples (x = 0.25, 0.50, 0.75, and 1.00) had a single phase with a hexagonal crystal structure. The particle size remained heterogeneous, ranging from 200 to 300 nm, with a platelet-like shape. The maximum amount of magnetic energy that could be absorbed by the material (Ms) increases from x = 0.25 to 0.75 and then decreases slightly for x = 1.00. The maximum value of reflection loss (RLmax) decreases as x increases. For x = 0.25, RLmax is − 16.17 dB (f = 11.06 GHz) with a bandwidth of 3.56 GHz, whereas for x = 1.0, RLmax is −13.94 dB (f = 11.14 GHz) with a bandwidth of 1.68 GHz.
- 3 January 2024
- Published by IOP Publishing in Physica Scripta
- Vol. 99 (2) , 025002
Open AccessThe Impact of Al3+ ion substitution on microwave absorption of hexaferrite compound Ba0.6Sr0.4Fe12−xAlxO19 (x = 0.25, 0.50, 0.75, and 1.00)
This paper discusses the impact of Al3+ ion substitution on Fe3+ ions in the hexaferrite compound Ba0.6Sr0.4Fe12−xAlxO19 on the reflection loss value and bandwidth in absorbing microwaves. Hexaferrite Ba0.6Sr0.4Fe12−xAlxO19 (x = 0.25, 0.50, 0.75, and 1.00) was synthesized by high-energy ball milling (HEBM) for forty hours, followed by sintering at 1000 °C in the air for five hours. Then, the crystal structure, formed phase, surface morphology, magnetization, and ability to absorb microwaves in the X-band region were successively characterized. All samples (x = 0.25, 0.50, 0.75, and 1.00) had a single phase with a hexagonal crystal structure. The particle size remained heterogeneous, ranging from 200 to 300 nm, with a platelet-like shape. The maximum amount of magnetic energy that could be absorbed by the material (Ms) increases from x = 0.25 to 0.75 and then decreases slightly for x = 1.00. The maximum value of reflection loss (RLmax) decreases as x increases. For x = 0.25, RLmax is − 16.17 dB (f = 11.06 GHz) with a bandwidth of 3.56 GHz, whereas for x = 1.0, RLmax is −13.94 dB (f = 11.14 GHz) with a bandwidth of 1.68 GHz.
- Open Access
- 1 November 2022
- Published by IOP Publishing in Journal of Physics: Conference Series
- Vol. 2377 (1) , 012066
The Competence of Prospective Physics Teachers in Making Interactive Teaching Materials in The PSAL Science Course
Teaching materials are one of the essential components of learning. The use of appropriate teaching materials is one aspect that can help achieve the learning objectives that have been formulated. Therefore, teachers as learning designers must be able to choose and provide appropriate teaching materials for the instructional learning objectives to be achieved. Students of the Physics Education study program are prospective teacher students who teach in schools, so students should be able to make appropriate teaching materials that can be used in the learning process. The teaching materials to be designed must, of course, be by the characteristics of students and by technological developments. This study aims to describe and analyze students’ abilities in designing interactive teaching materials in PSAL science courses. The research method used is descriptive qualitative. The results of data analysis show that, on average, students get a high score on aspects of completeness of identity, aspects of introduction, and aspects of the appearance of teaching materials. Teaching materials designed by students get low scores on content feasibility and assessment aspects. It happens because the ability of students to adjust the content of teaching materials to the learning objectives and assessment of learning contained in the teaching materials is still lacking.
- 1 November 2022
- Published by IOP Publishing in Journal of Physics: Conference Series
- Vol. 2377 (1) , 012066
Open AccessThe Competence of Prospective Physics Teachers in Making Interactive Teaching Materials in The PSAL Science Course
Teaching materials are one of the essential components of learning. The use of appropriate teaching materials is one aspect that can help achieve the learning objectives that have been formulated. Therefore, teachers as learning designers must be able to choose and provide appropriate teaching materials for the instructional learning objectives to be achieved. Students of the Physics Education study program are prospective teacher students who teach in schools, so students should be able to make appropriate teaching materials that can be used in the learning process. The teaching materials to be designed must, of course, be by the characteristics of students and by technological developments. This study aims to describe and analyze students’ abilities in designing interactive teaching materials in PSAL science courses. The research method used is descriptive qualitative. The results of data analysis show that, on average, students get a high score on aspects of completeness of identity, aspects of introduction, and aspects of the appearance of teaching materials. Teaching materials designed by students get low scores on content feasibility and assessment aspects. It happens because the ability of students to adjust the content of teaching materials to the learning objectives and assessment of learning contained in the teaching materials is still lacking.
- Open Access
- 22 July 2022
- Published by Universitas Pelita Harapan in Polyglot: Jurnal Ilmiah
- Vol. 18 (2) , 269-283
IMPLEMENTATION OF EDUCATIVE ASSESSMENT IN PHYSICS EDUCATION STUDY PROGRAM UPH DURING ONLINE LEARNING
Assessment is the collection of information about student learning outcomes. Educative assessment should enable students to respond as images of God and challenge them to grow and learn more. The purpose of this study is to describe the implementation of educative assessment in the Physics Education Study Program during the 2020/2021 academic year at the University of Pelita Harapan. This study used descriptive qualitative research methods. The Implementation of educative assessments were carried out through interdisciplinary assessment in some courses, mid-term and final-term personal reflections in all physics courses, vlogs in material physics courses as mid-term assessments, and used Moodle for review and weekly quizzes. Based on students’ feedback, it was known that the interdisciplinary assessment makes students understand the learning material deeper, more comprehensively, and integrated. The interdisciplinary assessment also makes the task load less overwhelming, especially during online learning. Vlogs as a mid-term assessment open space for students to be more creative and expressive to share knowledge in public, stimulate students' curiosity about learning material, and make students grow in their skills to find, summarize, and publish information digitally. At the end of the term, all of the students’ learning outcomes resulted in good and excellent grades. Bahasa Indonesia AbstrakPenilaian adalah pengumpulan informasi tentang hasil belajar siswa. Penilaian Edukatif memampukan siswa untuk merespon sebagai gambar Tuhan dan menantang mereka untuk tumbuh dan belajar lebih giat. Penelitian ini bertujuan untuk mendeskripsikan pengimplementasian penilaian edukatif pada Program Studi Pendidikan Fisika selama tahun ajaran 2020/2021 di Universitas Pelita Harapan dengan menggunakan metode penelitian deskriptif kualitatif. Penilaian edukatif dilakukan melalui penilaian interdisipliner pada beberapa mata kuliah, pembuatan refleksi pribadi pada tengah dan akhir semester pada semua mata kuliah fisika, Pembuatan vlog pada mata kuliah fisika material sebagai penilaian tengah semester, dan penggunaan moodle untuk review dan kuis mingguan. Berdasarkan umpan balik mahasiswa, diketahui bahwa penilaian interdisipliner membuat mereka memahami materi pembelajaran lebih dalam, lebih komprehensif dan terintegrasi. Penilaian interdisipliner juga membuat beban tugas tidak terlalu berat, terutama selama pembelajaran online. Pembuatan vlog sebagai penilaian tengah semester membuka ruang bagi mahasiswa untuk lebih kreatif dan ekspresif untuk berbagi ilmu di depan umum, merangsang rasa ingin tahu terhadap materi pembelajaran, dan menumbuhkan keterampilan mahasiswa dalam menemukan, merangkum, dan mempublikasikan informasi secara digital. Pada akhir semester, semua mahasiswa lulus dengan nilai yang baik dan sangat baik.
- 22 July 2022
- Published by Universitas Pelita Harapan in Polyglot: Jurnal Ilmiah
- Vol. 18 (2) , 269-283
Open AccessIMPLEMENTATION OF EDUCATIVE ASSESSMENT IN PHYSICS EDUCATION STUDY PROGRAM UPH DURING ONLINE LEARNING
Assessment is the collection of information about student learning outcomes. Educative assessment should enable students to respond as images of God and challenge them to grow and learn more. The purpose of this study is to describe the implementation of educative assessment in the Physics Education Study Program during the 2020/2021 academic year at the University of Pelita Harapan. This study used descriptive qualitative research methods. The Implementation of educative assessments were carried out through interdisciplinary assessment in some courses, mid-term and final-term personal reflections in all physics courses, vlogs in material physics courses as mid-term assessments, and used Moodle for review and weekly quizzes. Based on students’ feedback, it was known that the interdisciplinary assessment makes students understand the learning material deeper, more comprehensively, and integrated. The interdisciplinary assessment also makes the task load less overwhelming, especially during online learning. Vlogs as a mid-term assessment open space for students to be more creative and expressive to share knowledge in public, stimulate students' curiosity about learning material, and make students grow in their skills to find, summarize, and publish information digitally. At the end of the term, all of the students’ learning outcomes resulted in good and excellent grades. Bahasa Indonesia AbstrakPenilaian adalah pengumpulan informasi tentang hasil belajar siswa. Penilaian Edukatif memampukan siswa untuk merespon sebagai gambar Tuhan dan menantang mereka untuk tumbuh dan belajar lebih giat. Penelitian ini bertujuan untuk mendeskripsikan pengimplementasian penilaian edukatif pada Program Studi Pendidikan Fisika selama tahun ajaran 2020/2021 di Universitas Pelita Harapan dengan menggunakan metode penelitian deskriptif kualitatif. Penilaian edukatif dilakukan melalui penilaian interdisipliner pada beberapa mata kuliah, pembuatan refleksi pribadi pada tengah dan akhir semester pada semua mata kuliah fisika, Pembuatan vlog pada mata kuliah fisika material sebagai penilaian tengah semester, dan penggunaan moodle untuk review dan kuis mingguan. Berdasarkan umpan balik mahasiswa, diketahui bahwa penilaian interdisipliner membuat mereka memahami materi pembelajaran lebih dalam, lebih komprehensif dan terintegrasi. Penilaian interdisipliner juga membuat beban tugas tidak terlalu berat, terutama selama pembelajaran online. Pembuatan vlog sebagai penilaian tengah semester membuka ruang bagi mahasiswa untuk lebih kreatif dan ekspresif untuk berbagi ilmu di depan umum, merangsang rasa ingin tahu terhadap materi pembelajaran, dan menumbuhkan keterampilan mahasiswa dalam menemukan, merangkum, dan mempublikasikan informasi secara digital. Pada akhir semester, semua mahasiswa lulus dengan nilai yang baik dan sangat baik.
- Open Access
- 1 January 2021
- Published by IOP Publishing in Journal of Physics: Conference Series
- Vol. 1751 (1) , 012066
Impact of Mn4+ ion substitution on La0.4Sr0.6Fe1-xMnxO3 perovskite conductivity (x = 0.2, 0.4 and 0.6) as a solid fuel cell cathode
The samples La0.4Sr0.6Fe1-xMnxO3 (x = 0.2, 0.4, and 0.6) as solid fuel cell cathodes have been successfully synthesized and characterized. Samples were made using the solid-state reaction method with the wet milling technique. X-ray diffraction is used to see the phases formed. Surface morphology in the form of particle shape and size is characterized using scanning electron microscopy, while electronic conductivity at room temperature is measured by measuring its resistivity. Sample x = 0.4 has a single phase, while two other samples, x = 0.2 and 0.6 are still detected secondary phase. Surface morphology has a heterogeneous grain shape with a size between 63-250 nm. The best electronic conductivity at room temperature is obtained at a composition of x = 0.4 of 3.39 x 10-3 S.cm-1 so that it can be used as a candidate material for a solid fuel cell cathode.
- 1 January 2021
- Published by IOP Publishing in Journal of Physics: Conference Series
- Vol. 1751 (1) , 012066
Open AccessImpact of Mn4+ ion substitution on La0.4Sr0.6Fe1-xMnxO3 perovskite conductivity (x = 0.2, 0.4 and 0.6) as a solid fuel cell cathode
The samples La0.4Sr0.6Fe1-xMnxO3 (x = 0.2, 0.4, and 0.6) as solid fuel cell cathodes have been successfully synthesized and characterized. Samples were made using the solid-state reaction method with the wet milling technique. X-ray diffraction is used to see the phases formed. Surface morphology in the form of particle shape and size is characterized using scanning electron microscopy, while electronic conductivity at room temperature is measured by measuring its resistivity. Sample x = 0.4 has a single phase, while two other samples, x = 0.2 and 0.6 are still detected secondary phase. Surface morphology has a heterogeneous grain shape with a size between 63-250 nm. The best electronic conductivity at room temperature is obtained at a composition of x = 0.4 of 3.39 x 10-3 S.cm-1 so that it can be used as a candidate material for a solid fuel cell cathode.
- Open Access
- 20 June 2020
- Published by Lembaga Penelitian dan Pengabdian kepada Masyarakat ITS in Jurnal Fisika dan Aplikasinya
- Vol. 16 (2) , 67
The synthesis of TiO2 nanoparticles by Milling and Coprecipitation Mixed Method
Ilmenite type Fe2O3 waste (which is processed from natural iron sand) was processed into TiO2 nanoparticles powder carried out by leaching with HCl and then using high-energy milling (HEM) for 50 hours. The characteristics of the powder such as particle size, size distribution and phases were analyzed using various techniques such as XRD, SEM, EDS and particle size analyzer. Synthesis and characterization of ilmenite type iron sand have been successfully made into TiO2 by milling and coprecipitation mixed method. The purity level of TiO2 was obtained by 85.01%. Particle size of TiO2 was approximately 500 nm.
- 20 June 2020
- Published by Lembaga Penelitian dan Pengabdian kepada Masyarakat ITS in Jurnal Fisika dan Aplikasinya
- Vol. 16 (2) , 67
Open AccessThe synthesis of TiO2 nanoparticles by Milling and Coprecipitation Mixed Method
Ilmenite type Fe2O3 waste (which is processed from natural iron sand) was processed into TiO2 nanoparticles powder carried out by leaching with HCl and then using high-energy milling (HEM) for 50 hours. The characteristics of the powder such as particle size, size distribution and phases were analyzed using various techniques such as XRD, SEM, EDS and particle size analyzer. Synthesis and characterization of ilmenite type iron sand have been successfully made into TiO2 by milling and coprecipitation mixed method. The purity level of TiO2 was obtained by 85.01%. Particle size of TiO2 was approximately 500 nm.