Jean-Luc Kouyoumji
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Jean-Luc Kouyoumji has a total of 25 co-authors. Here are the top co-authors by number of shared publications:
- Alessandro Pracucci
Levery s.r.l. Società Benefit, Bellaria-Igea Marina, Italy, Italy
2 shared publications - Ana Gallego Fernández
ENAR Envolventes Arquitectónicas, C/Chile, 10, 28290 Madrid, Spain
2 shared publications - Arsenio Navarro Muedra
AIMPLAS Technological Institute of Polymers, 46980 Valencia, Spain
2 shared publications - Delphine Bard Hagberg
Division of Engineering Acoustics, Lund University, P.O. Box 118, 221 00 Lund, Sweden
2 shared publications - Julen Astudillo Larraz
TECNALIA, Basque Research and Technology Alliance (BRTA), Area Anardi 5, 20730 Azpeitia, Spain
2 shared publications - Laura Vandi
Focchi Spa, Via Cornacchiara 805, 47824 Rimini, Italy
2 shared publications
Latest Publications
- Open Access
Design and Simulation for Technological Integration of Bio-Based Components in Façade System Modules
Driven by environmental sustainability concerns, the integration of bio-based components in curtain wall systems is gaining traction in both research and the construction market. This paper explores the development and validation of a bio-based façade system within the Basajaun H2020 project (2019–2024). The project aimed to demonstrate the feasibility of introducing environmentally friendly bio-based components into the mature curtain wall façade industry. The paper focuses on identifying technological solutions for replacing key components such as frame profiles, insulation, and the tightness system with bio-based and less environmentally impactful alternatives, presenting the results achieved in the façade system design of the Basajaun project. These solutions aimed at creating a bio-composite-based curtain wall façade that adheres to the current building envelope standards and normative, implementing diverse façade typologies for vision panels, opaque sections, and integrated windows and, moreover, engineering the prefabrication process for industrialization and enabling wider market replication and simplified transport and installation. The results demonstrate that the Basajaun façade successfully integrates selected components and meets the performance requirements set by regulations: the façade is designed to withstand a maximum and typical wind load of 3.5 kN/m2 and a typical load of 1.5 kN/m2, the weighted sound reduction index obtained is Rw = 44 dB, and the thermal transmittance of the vision façade is 0.74 W/m2K while that of the entire opaque façade is 0.27 W/m2K (an additional internal wall is required to achieve the requested thermal transmittance)—the values are in accordance with reference standards and design requirements. However, questions remain regarding the workability of bio-based profiles as a commercially viable, ready-to-market solution that can replace traditional aluminum profiles in the curtain wall façade industry.
Open AccessDesign and Simulation for Technological Integration of Bio-Based Components in Façade System Modules
Driven by environmental sustainability concerns, the integration of bio-based components in curtain wall systems is gaining traction in both research and the construction market. This paper explores the development and validation of a bio-based façade system within the Basajaun H2020 project (2019–2024). The project aimed to demonstrate the feasibility of introducing environmentally friendly bio-based components into the mature curtain wall façade industry. The paper focuses on identifying technological solutions for replacing key components such as frame profiles, insulation, and the tightness system with bio-based and less environmentally impactful alternatives, presenting the results achieved in the façade system design of the Basajaun project. These solutions aimed at creating a bio-composite-based curtain wall façade that adheres to the current building envelope standards and normative, implementing diverse façade typologies for vision panels, opaque sections, and integrated windows and, moreover, engineering the prefabrication process for industrialization and enabling wider market replication and simplified transport and installation. The results demonstrate that the Basajaun façade successfully integrates selected components and meets the performance requirements set by regulations: the façade is designed to withstand a maximum and typical wind load of 3.5 kN/m2 and a typical load of 1.5 kN/m2, the weighted sound reduction index obtained is Rw = 44 dB, and the thermal transmittance of the vision façade is 0.74 W/m2K while that of the entire opaque façade is 0.27 W/m2K (an additional internal wall is required to achieve the requested thermal transmittance)—the values are in accordance with reference standards and design requirements. However, questions remain regarding the workability of bio-based profiles as a commercially viable, ready-to-market solution that can replace traditional aluminum profiles in the curtain wall façade industry.
- Open Access
- 26 March 2024
- Published by MDPI AG in Preprints.org
Design and Simulation for Technological Integration of Bio‐Based Components in Façade System Modules
Driven by environmental sustainability concerns, the integration of biobased components in curtain wall systems is gaining traction in both research and the construction market. This paper explores the development and validation of a bio-based façade system within the Basajaun H2020 project. The project aimed to demonstrate the feasibility of introducing environmentally friendly bio-based components into the mature curtain wall façade industry. The paper focuses on identifying technological solutions for replacing key components such as profiles, insulation, and the tightness system with bio-based and less environmental impact alternatives presenting the results achieved in the façade system design of the Basajaun project funded by European Union. These solutions aimed at creating a bio-composite-based curtain wall façade that adheres to current building envelope standards and normative; to implement diverse façade typologies for vision panels, opaque sections, and integrated windows; to engineer the prefabrication process for industrialization, enabling wider market replication and simplified transport and installation. The results demonstrate that the Basajaun façade successfully integrates selected components and meets the performance requirements set by regulations. However, questions remain regarding the workability of bio-based profiles as a commercially viable, ready-to-market solution that can replace traditional aluminum profiles in the curtain wall façade industry.
- 26 March 2024
- Published by MDPI AG in Preprints.org
Open AccessDesign and Simulation for Technological Integration of Bio‐Based Components in Façade System Modules
Driven by environmental sustainability concerns, the integration of biobased components in curtain wall systems is gaining traction in both research and the construction market. This paper explores the development and validation of a bio-based façade system within the Basajaun H2020 project. The project aimed to demonstrate the feasibility of introducing environmentally friendly bio-based components into the mature curtain wall façade industry. The paper focuses on identifying technological solutions for replacing key components such as profiles, insulation, and the tightness system with bio-based and less environmental impact alternatives presenting the results achieved in the façade system design of the Basajaun project funded by European Union. These solutions aimed at creating a bio-composite-based curtain wall façade that adheres to current building envelope standards and normative; to implement diverse façade typologies for vision panels, opaque sections, and integrated windows; to engineer the prefabrication process for industrialization, enabling wider market replication and simplified transport and installation. The results demonstrate that the Basajaun façade successfully integrates selected components and meets the performance requirements set by regulations. However, questions remain regarding the workability of bio-based profiles as a commercially viable, ready-to-market solution that can replace traditional aluminum profiles in the curtain wall façade industry.
- Open Access
Acoustic Performance Investigation of a CLT-Based Three-Floor Building
The acoustic performance of a CLT-based building mockup was investigated within the scope of the ADIVBois acoustic technical commission with the objective of defining wood building constructions fulfilling requirements. The CLT-based building is a three-floor construction with four rooms on each level. Measurements from junction characterization to airborne and impact sound insulations were taken. The implemented floor systems were first tested in a laboratory to evaluate their acoustic performance. Predictions based on the EN ISO 12354-1 and -2 standards were compared to building acoustic measurements. The effect of using the tapping machine and the rubber ball as impact sources was investigated both in laboratory and in the CLT-based building mockup. The effect of the apparent post between rooms is also presented with an associated simple approach to take it into account in predictions. This paper summarizes the obtained results.
Open AccessAcoustic Performance Investigation of a CLT-Based Three-Floor Building
The acoustic performance of a CLT-based building mockup was investigated within the scope of the ADIVBois acoustic technical commission with the objective of defining wood building constructions fulfilling requirements. The CLT-based building is a three-floor construction with four rooms on each level. Measurements from junction characterization to airborne and impact sound insulations were taken. The implemented floor systems were first tested in a laboratory to evaluate their acoustic performance. Predictions based on the EN ISO 12354-1 and -2 standards were compared to building acoustic measurements. The effect of using the tapping machine and the rubber ball as impact sources was investigated both in laboratory and in the CLT-based building mockup. The effect of the apparent post between rooms is also presented with an associated simple approach to take it into account in predictions. This paper summarizes the obtained results.
- Open Access
- 10 July 2022
- Published by MDPI AG in Applied Sciences
- Vol. 12 (14) , 6983
Prediction of Sound Insulation Using Artificial Neural Networks—Part II: Lightweight Wooden Façade Structures
A prediction model based on artificial neural networks is adapted to forecast the acoustic performance of airborne sound insulation of various lightweight wooden façade walls. A total of 100 insulation curves were used to develop the prediction model. The data are laboratory measurements of façade walls in one-third-octave bands (50 Hz–5 kHz). For each façade wall, geometric and physical information (material type, dimensions, thicknesses, densities, and more) are used as input parameters. The model shows a satisfactory predictive capability for airborne sound reduction. A higher accuracy is obtained at middle frequencies (250 Hz–1 kHz), while lower and higher frequency ranges often show higher deviations. The weighted airborne sound reduction index () of façades can be estimated with a maximum difference of 3 dB. Sometimes, the model shows high variations within fundamental and critical frequencies that influence the predictive precision. A sensitivity analysis is implemented to investigate the significance of parameters in insulation estimations. The material density (i.e., cross-laminated timber panel, gypsum board), thickness of the insulation materials, thickness and spacing between interior studs and the total density of façades are factors of significant weight on predictions. The results also emphasize the importance of façade thickness and the total density of the clustered exterior layers.- 10 July 2022
- Published by MDPI AG in Applied Sciences
- Vol. 12 (14) , 6983
Open AccessPrediction of Sound Insulation Using Artificial Neural Networks—Part II: Lightweight Wooden Façade Structures
A prediction model based on artificial neural networks is adapted to forecast the acoustic performance of airborne sound insulation of various lightweight wooden façade walls. A total of 100 insulation curves were used to develop the prediction model. The data are laboratory measurements of façade walls in one-third-octave bands (50 Hz–5 kHz). For each façade wall, geometric and physical information (material type, dimensions, thicknesses, densities, and more) are used as input parameters. The model shows a satisfactory predictive capability for airborne sound reduction. A higher accuracy is obtained at middle frequencies (250 Hz–1 kHz), while lower and higher frequency ranges often show higher deviations. The weighted airborne sound reduction index () of façades can be estimated with a maximum difference of 3 dB. Sometimes, the model shows high variations within fundamental and critical frequencies that influence the predictive precision. A sensitivity analysis is implemented to investigate the significance of parameters in insulation estimations. The material density (i.e., cross-laminated timber panel, gypsum board), thickness of the insulation materials, thickness and spacing between interior studs and the total density of façades are factors of significant weight on predictions. The results also emphasize the importance of façade thickness and the total density of the clustered exterior layers. - Open Access
- 6 April 2022
- Published by MDPI AG in Sustainability
- Vol. 14 (7) , 4358
The Future of Wood Construction: Opportunities and Barriers Based on Surveys in Europe and Chile
The demand for wood has increased in recent years due to new technical possibilities and environmental concerns. This paper provides an analysis of the factors that affect the use of wood in the construction sector, and an assessment of their importance in individual countries and for groups of stakeholders. The study covers the technical, societal, political, economic, and gender aspects of wood construction, with the aim of increasing global understanding regarding national differences, the current situation, and the potential for further development. The subject was investigated using a survey, and the most important opportunities for and barriers to growth in the use of wood in the construction sector were selected, following a statistical analysis. The results indicate strong regional and cultural differences regarding the acceptance of some of the opportunities and barriers related to the development of wood construction. The findings indicate that there is a need to promote wood construction based on its technical and economic benefits rather than its societal ones. On the other hand, the current societal barriers should be addressed as a priority, together with the establishment of common and harmonized policies. The results of this study, therefore, will contribute to the generation of regional-sensitive information that can be useful for policymakers when updating the building codes in their individual countries.
- 6 April 2022
- Published by MDPI AG in Sustainability
- Vol. 14 (7) , 4358
Open AccessThe Future of Wood Construction: Opportunities and Barriers Based on Surveys in Europe and Chile
The demand for wood has increased in recent years due to new technical possibilities and environmental concerns. This paper provides an analysis of the factors that affect the use of wood in the construction sector, and an assessment of their importance in individual countries and for groups of stakeholders. The study covers the technical, societal, political, economic, and gender aspects of wood construction, with the aim of increasing global understanding regarding national differences, the current situation, and the potential for further development. The subject was investigated using a survey, and the most important opportunities for and barriers to growth in the use of wood in the construction sector were selected, following a statistical analysis. The results indicate strong regional and cultural differences regarding the acceptance of some of the opportunities and barriers related to the development of wood construction. The findings indicate that there is a need to promote wood construction based on its technical and economic benefits rather than its societal ones. On the other hand, the current societal barriers should be addressed as a priority, together with the establishment of common and harmonized policies. The results of this study, therefore, will contribute to the generation of regional-sensitive information that can be useful for policymakers when updating the building codes in their individual countries.
- Open Access
Prediction of Sound Insulation Using Artificial Neural Networks—Part I: Lightweight Wooden Floor Structures
The artificial neural networks approach is applied to estimate the acoustic performance for airborne and impact sound insulation curves of different lightweight wooden floors. The prediction model is developed based on 252 standardized laboratory measurement curves in one-third octave bands (50–5000 Hz). Physical and geometric characteristics of each floor structure (materials, thickness, density, dimensions, mass and more) are utilized as network parameters. The predictive capability is satisfactory, and the model can estimate airborne sound better than impact sound cases especially in the middle-frequency range (250–1000 Hz), while higher frequency bands often show high errors. The forecast of the weighted airborne sound reduction index was calculated with a maximum error of 2 dB. However, the error increased up to 5 dB in the worse case prediction of the weighted normalized impact sound pressure level . The model showed high variations near the fundamental and critical frequency areas which affect the accuracy. A feature attribution analysis explored the essential parameters on estimation of sound insulation. The thickness of the insulation materials, the density of cross-laminated timber slab and the concrete floating floors and the total density of floor structures seem to affect predictions the most. A comparison between wet and dry floor solution systems indicated the importance of the upper part of floors to estimate airborne and impact sound in low frequencies.Open AccessPrediction of Sound Insulation Using Artificial Neural Networks—Part I: Lightweight Wooden Floor Structures
The artificial neural networks approach is applied to estimate the acoustic performance for airborne and impact sound insulation curves of different lightweight wooden floors. The prediction model is developed based on 252 standardized laboratory measurement curves in one-third octave bands (50–5000 Hz). Physical and geometric characteristics of each floor structure (materials, thickness, density, dimensions, mass and more) are utilized as network parameters. The predictive capability is satisfactory, and the model can estimate airborne sound better than impact sound cases especially in the middle-frequency range (250–1000 Hz), while higher frequency bands often show high errors. The forecast of the weighted airborne sound reduction index was calculated with a maximum error of 2 dB. However, the error increased up to 5 dB in the worse case prediction of the weighted normalized impact sound pressure level . The model showed high variations near the fundamental and critical frequency areas which affect the accuracy. A feature attribution analysis explored the essential parameters on estimation of sound insulation. The thickness of the insulation materials, the density of cross-laminated timber slab and the concrete floating floors and the total density of floor structures seem to affect predictions the most. A comparison between wet and dry floor solution systems indicated the importance of the upper part of floors to estimate airborne and impact sound in low frequencies.