Jianli Guo
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Jianli Guo has a total of 27 co-authors. Here are the top co-authors by number of shared publications:
- Hidekazu Mimura
The University of Tokyo
5 shared publications - Gota Yamaguchi
Riken SPring-8 Center, Sayo-cho, Japan
3 shared publications - Hiroto Motoyama
Research Center for Advanced Science and Technology, The University of Tokyo 2 , Meguro, Tokyo 153-8904
3 shared publications - Satoru Egawa
Research Center for Advanced Science and Technology (RCAST), The University of Tokyo 1 , 4-6-1 Komaba, Meguro City, Tokyo 153-8904
3 shared publications - Yusuke Matsuzawa
Technology Center, Natsume Optical Corporation 4 , Iida, Nagano 399-2413
3 shared publications - Makina Yabashi
Japan Synchrotron Radiation Research Institute
2 shared publications
Latest Publications
- 1 November 2026
- Published by AIP Publishing in Review of Scientific Instruments
- Vol. 97 (11)
Fabrication of ultrahigh precision master mandrel toward sub-10 arcsec x-ray Wolter mirror for x-ray telescope
X-ray telescopes with sub-10-arcsec angular resolution are required for detailed observations of high temperature celestial objects and high-energy phenomena in space. The angular resolution of an x-ray telescope depends on the figure accuracy of focusing optics, such as Wolter mirrors. In this research, a master mandrel was corrected to improve the figure accuracy of a Wolter mirror fabricated from the mandrel by nickel electroforming process. A nozzle-type elastic emission machining system was developed and applied to the figure correction over a limited area of the mandrel (110 mm in the longitudinal direction, 10° in the circumferential direction). The longitudinal figure accuracy of the mandrel was improved from 15–20 nm to ∼3 nm in Root Mean Square (RMS) value. A surface profiler system was developed to evaluate the longitudinal figure accuracy of Wolter mirrors. The measurement repeatability was 0.8 nm (RMS), which is sufficient for the evaluation of the figure accuracy. The figure accuracy of the Wolter mirror in the corrected area was evaluated to be 9.8 nm (RMS), and the slope error was 6.2 μrad (RMS). The imaging performance of a 2° azimuthal range in the corrected area of the Wolter mirror was evaluated by an x-ray focusing experiment at the 1-km beamline of BL29XU at SPring-8. The angular resolution was 4.3 ± 0.3 arcsec in half power diameter, which agreed with the angular resolution evaluated by ray-tracing simulation with the figure profile of the Wolter mirror evaluated by the developed surface profiler system. This agreement demonstrates that the developed surface profiler accurately measures the figure errors that affect the optical performance of the Wolter mirror.
- 1 November 2026
- Published by AIP Publishing in Review of Scientific Instruments
- Vol. 97 (11)
Fabrication of ultrahigh precision master mandrel toward sub-10 arcsec x-ray Wolter mirror for x-ray telescope
X-ray telescopes with sub-10-arcsec angular resolution are required for detailed observations of high temperature celestial objects and high-energy phenomena in space. The angular resolution of an x-ray telescope depends on the figure accuracy of focusing optics, such as Wolter mirrors. In this research, a master mandrel was corrected to improve the figure accuracy of a Wolter mirror fabricated from the mandrel by nickel electroforming process. A nozzle-type elastic emission machining system was developed and applied to the figure correction over a limited area of the mandrel (110 mm in the longitudinal direction, 10° in the circumferential direction). The longitudinal figure accuracy of the mandrel was improved from 15–20 nm to ∼3 nm in Root Mean Square (RMS) value. A surface profiler system was developed to evaluate the longitudinal figure accuracy of Wolter mirrors. The measurement repeatability was 0.8 nm (RMS), which is sufficient for the evaluation of the figure accuracy. The figure accuracy of the Wolter mirror in the corrected area was evaluated to be 9.8 nm (RMS), and the slope error was 6.2 μrad (RMS). The imaging performance of a 2° azimuthal range in the corrected area of the Wolter mirror was evaluated by an x-ray focusing experiment at the 1-km beamline of BL29XU at SPring-8. The angular resolution was 4.3 ± 0.3 arcsec in half power diameter, which agreed with the angular resolution evaluated by ray-tracing simulation with the figure profile of the Wolter mirror evaluated by the developed surface profiler system. This agreement demonstrates that the developed surface profiler accurately measures the figure errors that affect the optical performance of the Wolter mirror.
- 1 February 2026
- Published by AIP Publishing in Review of Scientific Instruments
- Vol. 97 (2)
High-speed imaging of cutting and electrical discharge machining (EDM) in thin metals and fluids using high-intensity 100 keV x rays
Conventional machining methods, such as cutting and electrical discharge machining (EDM), have significantly contributed to the manufacturing industry for a long time. Despite their extensive development history, the underlying machining mechanisms remain unclear because direct observation of actual cutting and EDM processes inside metals and fluids has been impossible. In this study, we employed an intense, high-energy x-ray beam from an undulator source to visualize the motion of tools and the processing surfaces during cutting and EDM processes. The 100-keV x rays with a flux density of 1013 photons/mm2 enabled non-destructive observation inside metals at a high frame rate of 5000 fps. This study demonstrates that conventional metal machining processes, including interactions under fluids, the motion of tools, and the change of the processing surface during drilling and small-hole EDM, can be observed clearly. The developed x-ray imaging system can be applied to analyzing various actual machining phenomena in both traditional and non-traditional processes.
- 1 February 2026
- Published by AIP Publishing in Review of Scientific Instruments
- Vol. 97 (2)
High-speed imaging of cutting and electrical discharge machining (EDM) in thin metals and fluids using high-intensity 100 keV x rays
Conventional machining methods, such as cutting and electrical discharge machining (EDM), have significantly contributed to the manufacturing industry for a long time. Despite their extensive development history, the underlying machining mechanisms remain unclear because direct observation of actual cutting and EDM processes inside metals and fluids has been impossible. In this study, we employed an intense, high-energy x-ray beam from an undulator source to visualize the motion of tools and the processing surfaces during cutting and EDM processes. The 100-keV x rays with a flux density of 1013 photons/mm2 enabled non-destructive observation inside metals at a high frame rate of 5000 fps. This study demonstrates that conventional metal machining processes, including interactions under fluids, the motion of tools, and the change of the processing surface during drilling and small-hole EDM, can be observed clearly. The developed x-ray imaging system can be applied to analyzing various actual machining phenomena in both traditional and non-traditional processes.
- Open Access
- 7 January 2025
- Published by AIP Publishing in Journal of Applied Physics
- Vol. 137 (1)
Study on chemical mechanism of processing silicon by PMMA in water
In a previous study, an eco-friendly planarization method for glass and silicon was proposed, utilizing the chemical properties of polymethyl methacrylate (PMMA) in water. Atomically flat, defect-free glass and silicon surfaces were observed using atomic force microscopy, indicating that the underlying processing phenomenon is based on chemical reactions. To date, PMMA remains the only material capable of achieving such surface flattening in water. Understanding the chemical processing mechanism is crucial for improving processing conditions and identifying other suitable polymer materials. In this study, ATR-FTIR spectroscopy and XPS were employed to analyze both the PMMA and the processed silicon surfaces. Based on various observations, we concluded that the O = C–O–C groups on the PMMA surface undergo hydrolysis during processing in water, leading to their rupture. This rupture creates active sites on the PMMA surface, which promote the formation of C–O–Si bonds between the PMMA and the silicon surface, facilitating the removal of silicon atoms.
- 7 January 2025
- Published by AIP Publishing in Journal of Applied Physics
- Vol. 137 (1)
Open AccessStudy on chemical mechanism of processing silicon by PMMA in water
In a previous study, an eco-friendly planarization method for glass and silicon was proposed, utilizing the chemical properties of polymethyl methacrylate (PMMA) in water. Atomically flat, defect-free glass and silicon surfaces were observed using atomic force microscopy, indicating that the underlying processing phenomenon is based on chemical reactions. To date, PMMA remains the only material capable of achieving such surface flattening in water. Understanding the chemical processing mechanism is crucial for improving processing conditions and identifying other suitable polymer materials. In this study, ATR-FTIR spectroscopy and XPS were employed to analyze both the PMMA and the processed silicon surfaces. Based on various observations, we concluded that the O = C–O–C groups on the PMMA surface undergo hydrolysis during processing in water, leading to their rupture. This rupture creates active sites on the PMMA surface, which promote the formation of C–O–Si bonds between the PMMA and the silicon surface, facilitating the removal of silicon atoms.
- Open Access
- 5 November 2023
- Published by Japan Society for Precision Engineering in Journal of the Japan Society for Precision Engineering
- Vol. 89 (11) , 844-849
Observation of Particle Behavior between Tool and Workpiece in Ultra-Precision Local Machining of Glass Surfaces Using Organic Abrasive
Organic abrasive machining (OAM) is a local machining method using organic abrasives and elastic rotating tool with a small-diameter, which is applicable to high-spatial-resolution figure correction of high-precision optical surfaces owing to its low machining rate and small spot size. In order to clarify the machining mechanism of OAM, the particle behavior between the tool and a transparent workpiece was observed in-situ using a microscopic observation system with a high-speed camera. First, the elastic contact area between the tool and workpiece surface was calculated based on Hertzian elastic contact theory, and the tool size for the observation experiment was determined. Next, a microscopic optical system was constructed and the velocity distribution of particles was obtained by in-situ observation. The particles moved linearly along the direction of tool rotation and the speed distribution had a narrow peak width at the center of the contact area. The ratio of particle speed to tool surface speed was independent of the tool rotation conditions (500 rpm to 2000 rpm). The particle speed distribution had a similar profile to the depth distribution of the stationary machining spot.
- 5 November 2023
- Published by Japan Society for Precision Engineering in Journal of the Japan Society for Precision Engineering
- Vol. 89 (11) , 844-849
Open AccessObservation of Particle Behavior between Tool and Workpiece in Ultra-Precision Local Machining of Glass Surfaces Using Organic Abrasive
Organic abrasive machining (OAM) is a local machining method using organic abrasives and elastic rotating tool with a small-diameter, which is applicable to high-spatial-resolution figure correction of high-precision optical surfaces owing to its low machining rate and small spot size. In order to clarify the machining mechanism of OAM, the particle behavior between the tool and a transparent workpiece was observed in-situ using a microscopic observation system with a high-speed camera. First, the elastic contact area between the tool and workpiece surface was calculated based on Hertzian elastic contact theory, and the tool size for the observation experiment was determined. Next, a microscopic optical system was constructed and the velocity distribution of particles was obtained by in-situ observation. The particles moved linearly along the direction of tool rotation and the speed distribution had a narrow peak width at the center of the contact area. The ratio of particle speed to tool surface speed was independent of the tool rotation conditions (500 rpm to 2000 rpm). The particle speed distribution had a similar profile to the depth distribution of the stationary machining spot.
- 28 February 2022
- Published by AIP Publishing in Applied Physics Letters
- Vol. 120 (9) , 094105
Atomic-level smoothing of glass and silicon surfaces by water polishing with an acrylic polymer plate
Polishing techniques have been used since antiquity but remain important in high-value manufacturing processes in optics and semiconductor fields. State-of-the-art polishing enables the production of atomically flat surfaces of even advanced materials, such as diamond, SiC, and GaN, by exploiting the exceptional chemical characteristics of particle surfaces, fluid solutions, and pad surfaces. Although various effective chemical reactions are employed, chemical reactivities of organic polymer surfaces have not been thoroughly explored. We demonstrate a water-only and slurry-less polishing technique using an acrylic polymer plate. We investigated the possibility of glass processing with several polymer materials and found that normal acrylic polymers have remarkable properties for polishing. Glass and silicon surfaces with atomic-level flatness can be produced using only an acrylic polymer plate and water. We believe that the developed polishing methods will become popular in the future because they are simple and cost-effective processes.
- 28 February 2022
- Published by AIP Publishing in Applied Physics Letters
- Vol. 120 (9) , 094105
Atomic-level smoothing of glass and silicon surfaces by water polishing with an acrylic polymer plate
Polishing techniques have been used since antiquity but remain important in high-value manufacturing processes in optics and semiconductor fields. State-of-the-art polishing enables the production of atomically flat surfaces of even advanced materials, such as diamond, SiC, and GaN, by exploiting the exceptional chemical characteristics of particle surfaces, fluid solutions, and pad surfaces. Although various effective chemical reactions are employed, chemical reactivities of organic polymer surfaces have not been thoroughly explored. We demonstrate a water-only and slurry-less polishing technique using an acrylic polymer plate. We investigated the possibility of glass processing with several polymer materials and found that normal acrylic polymers have remarkable properties for polishing. Glass and silicon surfaces with atomic-level flatness can be produced using only an acrylic polymer plate and water. We believe that the developed polishing methods will become popular in the future because they are simple and cost-effective processes.