Ramazan Erdem
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Ramazan Erdem has a total of 27 co-authors. Here are the top co-authors by number of shared publications:
- Ahmet Çoşgun
Department of Mechanical Engineering, Faculty of Engineering, Akdeniz University, 07058 Antalya, Türkiye
3 shared publications - Mariyam Yeziyeva
Akdeniz University
3 shared publications - Gulmira Kenzhibayeva
Южно-Казахстанский исследовательский университет имени М.Ауэзова
2 shared publications - Makpal Sikhimbayeva
М.Әуезов атындағы Оңтүстік Қазақстан Университеті, Шымкент, Қазақстан
2 shared publications - N.E. Botabayev
M. Auezov South-Kazakhstan University
2 shared publications - A.K. Absallimova
Южно-Казахстанский университет им.М.Ауэзова,Шымкент,Казахстан
1 shared publication
Latest Publications
- 15 October 2026
- Published by Tekstil Ve Konfeksiyon in TEKSTİL VE KONFEKSİYON
- Vol. 36 (3) , 202-217
Development of Electromagnetic Shielding Knitted Fabrics and Conceptual Design Proposals for Ergonomic Maternity Clothing
Current study focuses on developing conductive weft-knitted fabrics with electromagnetic shielding properties for potential use in ergonomic maternity clothing. Conductive core-spun yarns were produced by wrapping 40 µm stainless steel wires with cotton fibers via ring spinning and knitted into single jersey, rib (1×1), and interlock structures. The fabrics' electromagnetic shielding effectiveness (EMSE) and surface resistivity were tested across 0.1 to 3 GHz. Fabrics with higher conductive yarn content showed lower surface resistivity (down to 6.54 × 10⁴ Ω) and higher EMSE, with the best-performing sample achieving 10.09 dB. Shielding effectiveness was strongest at lower frequencies, gradually decreasing as frequency increased. Interlock and rib structures outperformed single jersey due to their denser configurations. Building on these results, a conceptual collection of ergonomic maternity dresses was suggested, emphasizing protection, comfort, sustainability, and the needs of pregnant women.
- 15 October 2026
- Published by Tekstil Ve Konfeksiyon in TEKSTİL VE KONFEKSİYON
- Vol. 36 (3) , 202-217
Development of Electromagnetic Shielding Knitted Fabrics and Conceptual Design Proposals for Ergonomic Maternity Clothing
Current study focuses on developing conductive weft-knitted fabrics with electromagnetic shielding properties for potential use in ergonomic maternity clothing. Conductive core-spun yarns were produced by wrapping 40 µm stainless steel wires with cotton fibers via ring spinning and knitted into single jersey, rib (1×1), and interlock structures. The fabrics' electromagnetic shielding effectiveness (EMSE) and surface resistivity were tested across 0.1 to 3 GHz. Fabrics with higher conductive yarn content showed lower surface resistivity (down to 6.54 × 10⁴ Ω) and higher EMSE, with the best-performing sample achieving 10.09 dB. Shielding effectiveness was strongest at lower frequencies, gradually decreasing as frequency increased. Interlock and rib structures outperformed single jersey due to their denser configurations. Building on these results, a conceptual collection of ergonomic maternity dresses was suggested, emphasizing protection, comfort, sustainability, and the needs of pregnant women.
- 30 September 2026
- Published by Dulaty University in Mechanics and Technologies
- No. 3,p. 304-319
REVIEW OF INNOVATIVE DEVELOPMENTS IN THE TEXTILE INDUSTRY
В данной обзорной статье представлен систематизированный анализ современных инновационных разработок в текстильной промышленности с акцентом на функциональные, интеллектуальные и многослойные композиционные материалы. Выявлено, что современный вектор развития отрасли сместился от создания новых волокон к глубокой модификации существующих структур с применением нанотехнологий, металлосодержащих покрытий и биополимеров. В работе классифицированы основные направления «нео-текстиля»: электронный, активный и эко-техно текстиль. Особое внимание уделено механизмам формирования электропроводимости, антибактериальности и термочувствительности тканей методами магнетронного распыления и химического осаждения. Проведённый обзор доказывает, что интеграция сенсорных структур и носимой электроники позволяет создавать адаптивные системы для медицины, нефтегазового сектора и спорта. Полученные результаты подчеркивают необходимость перехода к экологически безопасным методам модификации и могут служить научно-технологической основой для внедрения «умных» материалов в промышленное производство.
- 30 September 2026
- Published by Dulaty University in Mechanics and Technologies
- No. 3,p. 304-319
REVIEW OF INNOVATIVE DEVELOPMENTS IN THE TEXTILE INDUSTRY
В данной обзорной статье представлен систематизированный анализ современных инновационных разработок в текстильной промышленности с акцентом на функциональные, интеллектуальные и многослойные композиционные материалы. Выявлено, что современный вектор развития отрасли сместился от создания новых волокон к глубокой модификации существующих структур с применением нанотехнологий, металлосодержащих покрытий и биополимеров. В работе классифицированы основные направления «нео-текстиля»: электронный, активный и эко-техно текстиль. Особое внимание уделено механизмам формирования электропроводимости, антибактериальности и термочувствительности тканей методами магнетронного распыления и химического осаждения. Проведённый обзор доказывает, что интеграция сенсорных структур и носимой электроники позволяет создавать адаптивные системы для медицины, нефтегазового сектора и спорта. Полученные результаты подчеркивают необходимость перехода к экологически безопасным методам модификации и могут служить научно-технологической основой для внедрения «умных» материалов в промышленное производство.
- 30 September 2026
- Published by Wiley in Coloration Technology
Natural dyeing of bacterial cellulose membranes with cochineal insect–derived pigment
The growing demand for sustainable textile materials has increased interest in bacterial cellulose (BC) as a renewable alternative to conventional cellulosic fibres. However, the coloration of BC with animal‐derived natural dyes remains insufficiently explored. In this study, Kombucha‐derived BC membranes were dyed with cochineal ( Dactylopius coccus ) pigment after mordanting with potassium aluminium sulphate, iron(II) sulphate or copper sulphate. The membranes were characterised by “SEM‐EDX”, FTIR spectroscopy, CIELab colour measurements, UV transmittance, tensile testing, water contact angle and apparent surface free energy analyses. SEM observations confirmed that the nanofibrillar BC structure was preserved after pretreatment, mordanting and dyeing, while EDX verified the incorporation of Al, Fe and Cu ions into the cellulose matrix. FTIR spectra indicated that the cellulose backbone remained intact following all treatments. The alum‐mordanted membrane showed the highest colour strength (K/S = 21.87), whereas iron and copper mordants produced darker, brownish shades. Mordanting markedly enhanced UV shielding, with the copper‐mordanted membrane exhibiting the lowest UVA (0.05%) and UVB (0.07%) transmittance. Although oxidative pretreatment reduced tensile strength from 20.55 to 14.51 MPa, iron mordanting partially restored it to 19.60 MPa. H 2 O 2 pretreatment increased surface wettability by reducing the water contact angle from 56.7° to 51.8°, whereas glycerol treatment substantially increased apparent hydrophobicity. The iron‐mordanted membrane displayed the highest contact angle (118.9°) and lowest surface free energy (11.8 mJ m −2 ). Overall, cochineal dyeing combined with appropriate mordant selection offers a promising route for producing sustainable, coloured and multifunctional BC membranes with improved optical, mechanical and surface properties for textile applications.
- 30 September 2026
- Published by Wiley in Coloration Technology
Natural dyeing of bacterial cellulose membranes with cochineal insect–derived pigment
The growing demand for sustainable textile materials has increased interest in bacterial cellulose (BC) as a renewable alternative to conventional cellulosic fibres. However, the coloration of BC with animal‐derived natural dyes remains insufficiently explored. In this study, Kombucha‐derived BC membranes were dyed with cochineal ( Dactylopius coccus ) pigment after mordanting with potassium aluminium sulphate, iron(II) sulphate or copper sulphate. The membranes were characterised by “SEM‐EDX”, FTIR spectroscopy, CIELab colour measurements, UV transmittance, tensile testing, water contact angle and apparent surface free energy analyses. SEM observations confirmed that the nanofibrillar BC structure was preserved after pretreatment, mordanting and dyeing, while EDX verified the incorporation of Al, Fe and Cu ions into the cellulose matrix. FTIR spectra indicated that the cellulose backbone remained intact following all treatments. The alum‐mordanted membrane showed the highest colour strength (K/S = 21.87), whereas iron and copper mordants produced darker, brownish shades. Mordanting markedly enhanced UV shielding, with the copper‐mordanted membrane exhibiting the lowest UVA (0.05%) and UVB (0.07%) transmittance. Although oxidative pretreatment reduced tensile strength from 20.55 to 14.51 MPa, iron mordanting partially restored it to 19.60 MPa. H 2 O 2 pretreatment increased surface wettability by reducing the water contact angle from 56.7° to 51.8°, whereas glycerol treatment substantially increased apparent hydrophobicity. The iron‐mordanted membrane displayed the highest contact angle (118.9°) and lowest surface free energy (11.8 mJ m −2 ). Overall, cochineal dyeing combined with appropriate mordant selection offers a promising route for producing sustainable, coloured and multifunctional BC membranes with improved optical, mechanical and surface properties for textile applications.
- Open Access
- 30 October 2025
- Published by SAGE Publications in Textile Research Journal
- Vol. 96 (21-22) , 2213-2224
Exploring the synergistic impact of carbon, SiO 2 , and Al 2 O 3 fillers on the properties of melt-spun polypropylene filaments
The current study investigates the effects of incorporating various fillers of carbon, silica, and alumina into polypropylene (PP) filaments produced via melt-spinning, aiming to enhance their thermal and mechanical properties. Both single-type and multifiller systems were employed to assess individual and synergistic impacts on composite filament performance. PP filaments were fabricated under optimized processing conditions, and their morphological, structural, thermal, and mechanical behaviors were systematically evaluated using scanning electron microscopy combined with energy dispersive spectroscopy, Fourier transform infrared spectroscopy, and tensile tests. The results revealed that multifiller combinations significantly improved the thermal stability and mechanical strength of PP filaments, outperforming single-filler systems at equivalent loading levels (4.3 wt.%). The best-performing sample, containing a synergistic blend of all three fillers, achieved the highest thermal decomposition temperature (541°C), a notable increase in tensile strength (57 MPa), and preserved elongation at break (350%). Thermogravimetric and differential scanning colorimetric analyses confirmed the improvements in thermal resistance and melting behavior associated with optimized multifiller incorporation. In contrast, single-filler filaments, especially those with high alumina content, demonstrated limited reinforcement effects and pronounced brittleness due to poor dispersion and agglomeration.
- 30 October 2025
- Published by SAGE Publications in Textile Research Journal
- Vol. 96 (21-22) , 2213-2224
Open AccessExploring the synergistic impact of carbon, SiO 2 , and Al 2 O 3 fillers on the properties of melt-spun polypropylene filaments
The current study investigates the effects of incorporating various fillers of carbon, silica, and alumina into polypropylene (PP) filaments produced via melt-spinning, aiming to enhance their thermal and mechanical properties. Both single-type and multifiller systems were employed to assess individual and synergistic impacts on composite filament performance. PP filaments were fabricated under optimized processing conditions, and their morphological, structural, thermal, and mechanical behaviors were systematically evaluated using scanning electron microscopy combined with energy dispersive spectroscopy, Fourier transform infrared spectroscopy, and tensile tests. The results revealed that multifiller combinations significantly improved the thermal stability and mechanical strength of PP filaments, outperforming single-filler systems at equivalent loading levels (4.3 wt.%). The best-performing sample, containing a synergistic blend of all three fillers, achieved the highest thermal decomposition temperature (541°C), a notable increase in tensile strength (57 MPa), and preserved elongation at break (350%). Thermogravimetric and differential scanning colorimetric analyses confirmed the improvements in thermal resistance and melting behavior associated with optimized multifiller incorporation. In contrast, single-filler filaments, especially those with high alumina content, demonstrated limited reinforcement effects and pronounced brittleness due to poor dispersion and agglomeration.
- Open Access
- 20 March 2025
- Published by Almaty Technological University JSC in The Journal of Almaty Technological University
- Vol. 147 (1) , 143-152
Research of the improved properties of warknitted bandage (fittex) after copper modification
Modification of textile materials using nanostructured metal coatings is a relevant area aimed at creating products with antibacterial properties. In this work, the properties of the warp-knitted Fittex bandage were improved after treatment with a copper complex solution, which caused a growing need for effective and safe dressings for medical use. The purpose of the study was to improve the main property of the warp-knitted Fittex bandage by treating with a copper complex solution to create medical dressings with increased cost-effectiveness and improved protective properties. The main attention was paid to the uniformity of the distribution of copper nanoparticles over the surface of the knitted bandage, their size and effect on the characteristics. The scientific originality of the work lies in the development of a method for applying a copper coating that provides long-term antibacterial activity without affecting the structural and mechanical properties of the fabric. Practical innovation necessitated the use of a modified bandage in medical practice for prevention. The research methodology, material processing, dipping method in copper complex solution with subsequent drying, and the use of spectral analysis methods such as infrared spectroscopy and elemental analysis to study the surface structure and distribution of copper nanoparticles. To evaluate the antibacterial properties, tests were carried out for activity against various pathogenic studies. The results of the study showed the spread of copper particles on the surface of the knitted bandage and their adhesion. The antibacterial properties of the modified knitted bandage were significantly enhanced, while maintaining mechanical characteristics such as elasticity and strength. The analysis of the results shows the prospects for using the modified bandage to expand the range of medical products. The value of the work lies in the development of an effective approach to using the properties of a warp-knitted bandage through copper modification. The research results contribute to the development of textile functionalization technology and open up new opportunities for creating safe materials for medical purposes, providing improved protection and safety for patients.
- 20 March 2025
- Published by Almaty Technological University JSC in The Journal of Almaty Technological University
- Vol. 147 (1) , 143-152
Open AccessResearch of the improved properties of warknitted bandage (fittex) after copper modification
Modification of textile materials using nanostructured metal coatings is a relevant area aimed at creating products with antibacterial properties. In this work, the properties of the warp-knitted Fittex bandage were improved after treatment with a copper complex solution, which caused a growing need for effective and safe dressings for medical use. The purpose of the study was to improve the main property of the warp-knitted Fittex bandage by treating with a copper complex solution to create medical dressings with increased cost-effectiveness and improved protective properties. The main attention was paid to the uniformity of the distribution of copper nanoparticles over the surface of the knitted bandage, their size and effect on the characteristics. The scientific originality of the work lies in the development of a method for applying a copper coating that provides long-term antibacterial activity without affecting the structural and mechanical properties of the fabric. Practical innovation necessitated the use of a modified bandage in medical practice for prevention. The research methodology, material processing, dipping method in copper complex solution with subsequent drying, and the use of spectral analysis methods such as infrared spectroscopy and elemental analysis to study the surface structure and distribution of copper nanoparticles. To evaluate the antibacterial properties, tests were carried out for activity against various pathogenic studies. The results of the study showed the spread of copper particles on the surface of the knitted bandage and their adhesion. The antibacterial properties of the modified knitted bandage were significantly enhanced, while maintaining mechanical characteristics such as elasticity and strength. The analysis of the results shows the prospects for using the modified bandage to expand the range of medical products. The value of the work lies in the development of an effective approach to using the properties of a warp-knitted bandage through copper modification. The research results contribute to the development of textile functionalization technology and open up new opportunities for creating safe materials for medical purposes, providing improved protection and safety for patients.
- 30 June 2024
- Published by Dulaty University in Mechanics and Technologies
- No. 2,p. 313-326
CHANGES IN THE CALORIMETRIC CHARACTERISTICS OF TEXTILES DURING ANTIBACTERIAL TREATMENT WITH METAL NANOPARTICLES
This review presents the effect of metal nanoparticles in the process of dyeing textile fibers with traditional dyes on color change, color stability and biocidal potentials. The latest achievements in the use of metal nanoparticles as new classes of dyes and antimicrobial agents, and their influence on the calorimetric and antibacterial characteristics of various textile materials are also presented. New approaches to the functionalization of textile materials by methods of green synthesis of LF of various metals using plant extracts are proposed. The use of plant extracts for the manufacture of metal nanoparticles is simple, convenient, inexpensive, easily scalable, less energy-intensive, environmentally friendly, minimizes the use of unsafe materials and maximizes the efficiency of the process. LF-Ag processing enhances the color reproduction of materials, as well as improves resistance to light and washing, which suggests that these methods can overcome the limitations of traditional dyeing processes.
- 30 June 2024
- Published by Dulaty University in Mechanics and Technologies
- No. 2,p. 313-326
CHANGES IN THE CALORIMETRIC CHARACTERISTICS OF TEXTILES DURING ANTIBACTERIAL TREATMENT WITH METAL NANOPARTICLES
This review presents the effect of metal nanoparticles in the process of dyeing textile fibers with traditional dyes on color change, color stability and biocidal potentials. The latest achievements in the use of metal nanoparticles as new classes of dyes and antimicrobial agents, and their influence on the calorimetric and antibacterial characteristics of various textile materials are also presented. New approaches to the functionalization of textile materials by methods of green synthesis of LF of various metals using plant extracts are proposed. The use of plant extracts for the manufacture of metal nanoparticles is simple, convenient, inexpensive, easily scalable, less energy-intensive, environmentally friendly, minimizes the use of unsafe materials and maximizes the efficiency of the process. LF-Ag processing enhances the color reproduction of materials, as well as improves resistance to light and washing, which suggests that these methods can overcome the limitations of traditional dyeing processes.
- 30 June 2024
- Published by Dulaty University in Mechanics and Technologies
- No. 2,p. 380-388
RETROSPECTIVE ANALYSIS OF SCIENTIFIC RESEARCH ON THE DEVELOPMENT OF SPECIAL CLOTHING FOR THE CONSTRUCTION INDUSTRY
The article has a review character on definition of reliability of special purpose products intended for workers of construction industry. In this article the prerequisites of choice, substantiation of directions of scientific researches on improvement of methods of designing and manufacturing of special clothes in order to provide safety of life activity of builders are defined. The conducted review has shown essential disadvantages of the used methods providing safety of special clothes and has revealed a degree of their dependence on those or other factors. Among the above-mentioned factors include selected materials, manufacturing technologies that have a significant impact on the properties of the designed special clothing. For this purpose it is proposed to use the methodology in which the weight coefficients are assigned to the indicators by numerical variation from 10 to 0 with 0.5 interval. Due to this methodology weighting coefficients are determined and calculated by the significance of the main and additional factors, which in turn have a significant impact on the functional properties of the designed special clothing. Keywords: special clothing, materials, products, prod
- 30 June 2024
- Published by Dulaty University in Mechanics and Technologies
- No. 2,p. 380-388
RETROSPECTIVE ANALYSIS OF SCIENTIFIC RESEARCH ON THE DEVELOPMENT OF SPECIAL CLOTHING FOR THE CONSTRUCTION INDUSTRY
The article has a review character on definition of reliability of special purpose products intended for workers of construction industry. In this article the prerequisites of choice, substantiation of directions of scientific researches on improvement of methods of designing and manufacturing of special clothes in order to provide safety of life activity of builders are defined. The conducted review has shown essential disadvantages of the used methods providing safety of special clothes and has revealed a degree of their dependence on those or other factors. Among the above-mentioned factors include selected materials, manufacturing technologies that have a significant impact on the properties of the designed special clothing. For this purpose it is proposed to use the methodology in which the weight coefficients are assigned to the indicators by numerical variation from 10 to 0 with 0.5 interval. Due to this methodology weighting coefficients are determined and calculated by the significance of the main and additional factors, which in turn have a significant impact on the functional properties of the designed special clothing. Keywords: special clothing, materials, products, prod
- Open Access
- 17 June 2024
- Published by Almaty Technological University JSC in The Journal of Almaty Technological University
- Vol. 144 (2) , 155-164
Study of textile carpet combustion process
Currently, synthetic carpet products are widely used in the home, as they compare favorably with natural ones in terms of technical characteristics. This is due to their high durability, lack of tendency to rot, wide range of colors and relatively low cost of production. However, the ease, ignition and increased flammability of most synthetic carpet products result in rapid spread of fire through them, igniting other products and objects in the vicinity. The sources of the fire are usually matches, cigarettes, careless handling of fire, and short circuits. In this regard, the purpose of the study is to investigate the combustion process of textile synthetic carpet products of "Bal Textile" LLP with justification of the most rational methods of flammability and combustibility assessment. Subject of research: processes of thermo-oxidative destruction of modified polypropylene textile materials and their relationship with fire hazard properties, flammability of fiber-forming polymers. The combustion process of synthetic carpet products of Bal Textile LLP with different Heat Set yarn densities and pile lengths were investigated. Based on the research we have done, it has been concluded that the higher the pile of the carpet, the higher the level of combustion. Carpets melt when ignited and are also colored as a black liquid. The value of the conducted research is that on their basis it is possible to classify materials by degree of combustibility (flammability) and to develop requirements for synthetic carpet products of LLP "Bal Textile" of reduced fire hazard taking into account their possible application in practice.
- 17 June 2024
- Published by Almaty Technological University JSC in The Journal of Almaty Technological University
- Vol. 144 (2) , 155-164
Open AccessStudy of textile carpet combustion process
Currently, synthetic carpet products are widely used in the home, as they compare favorably with natural ones in terms of technical characteristics. This is due to their high durability, lack of tendency to rot, wide range of colors and relatively low cost of production. However, the ease, ignition and increased flammability of most synthetic carpet products result in rapid spread of fire through them, igniting other products and objects in the vicinity. The sources of the fire are usually matches, cigarettes, careless handling of fire, and short circuits. In this regard, the purpose of the study is to investigate the combustion process of textile synthetic carpet products of "Bal Textile" LLP with justification of the most rational methods of flammability and combustibility assessment. Subject of research: processes of thermo-oxidative destruction of modified polypropylene textile materials and their relationship with fire hazard properties, flammability of fiber-forming polymers. The combustion process of synthetic carpet products of Bal Textile LLP with different Heat Set yarn densities and pile lengths were investigated. Based on the research we have done, it has been concluded that the higher the pile of the carpet, the higher the level of combustion. Carpets melt when ignited and are also colored as a black liquid. The value of the conducted research is that on their basis it is possible to classify materials by degree of combustibility (flammability) and to develop requirements for synthetic carpet products of LLP "Bal Textile" of reduced fire hazard taking into account their possible application in practice.
- 4 March 2022
- Published by Taylor & Francis in The Journal of the Textile Institute
- Vol. 114 (3) , 441-454
Electrospinning of antibacterial scaffolds composed of poly (L-lactide-co-ε-caprolactone)/collagen type I/silver doped hydroxyapatite particles: potential material for bone tissue engineering
In current study, various types of electrospun scaffolds have been prepared including poly(L-lactide-co-ε-caprolactone), collagen type I, hydroxyapatite nanoparticles (HAp) and silver doped hydroxyapatite particles (Ag-HAp). 13C-NMR, 1H-NMR, FT-IR, XRD, TEM and EDS analyses were performed to characterize the synthesized copolymer and nanoparticles. SEM analysis revealed that the greatest fiber diameter (761 ± 434 nm) was yielded for PLCL fibers, on the other hand, smallest diameter (151 ± 91 nm) was measured for PLCL/COL/Ag-HAp based fibers. According to contact angle test, the existence of collagen and HAp in the blend improved the hydrophilicity of the electrospun scaffolds. The highest tensile strength value (28 MPa) was determined for PLCL/COL based scaffold in the machine direction. Antibacterial efficiency of PLCL/COL/Ag-HAp scaffold was evaluated against gram-positive (Staphylococcus aureus) and gram-negative (Escherichia coli) bacteria and remarkable bactericidal effect (99.99%) has been recorded. Graphical Abstract
- 4 March 2022
- Published by Taylor & Francis in The Journal of the Textile Institute
- Vol. 114 (3) , 441-454
Electrospinning of antibacterial scaffolds composed of poly (L-lactide-co-ε-caprolactone)/collagen type I/silver doped hydroxyapatite particles: potential material for bone tissue engineering
In current study, various types of electrospun scaffolds have been prepared including poly(L-lactide-co-ε-caprolactone), collagen type I, hydroxyapatite nanoparticles (HAp) and silver doped hydroxyapatite particles (Ag-HAp). 13C-NMR, 1H-NMR, FT-IR, XRD, TEM and EDS analyses were performed to characterize the synthesized copolymer and nanoparticles. SEM analysis revealed that the greatest fiber diameter (761 ± 434 nm) was yielded for PLCL fibers, on the other hand, smallest diameter (151 ± 91 nm) was measured for PLCL/COL/Ag-HAp based fibers. According to contact angle test, the existence of collagen and HAp in the blend improved the hydrophilicity of the electrospun scaffolds. The highest tensile strength value (28 MPa) was determined for PLCL/COL based scaffold in the machine direction. Antibacterial efficiency of PLCL/COL/Ag-HAp scaffold was evaluated against gram-positive (Staphylococcus aureus) and gram-negative (Escherichia coli) bacteria and remarkable bactericidal effect (99.99%) has been recorded. Graphical Abstract