GKGulmira Kenzhibayeva

Gulmira Kenzhibayeva

*This is an algorithmically generated author record based on publicly available information.

Gulmira Kenzhibayeva has a total of 19 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    КОМПЛЕКСНАЯ ЭКОЛОГИЧЕСКАЯ ОЦЕНКА ТЕХНОГЕННЫХ ОТХОДОВ ПРОМЫШЛЕННЫХ ПРЕДПРИЯТИЙ И ИХ ВЛИЯНИЕ НА ОКРУЖАЮЩУЮ СРЕДУ (НА ПРИМЕРЕ Г. ШЫМКЕНТА)

    by Сабыр Балыбек, Гульмира Кенжибаева, Айсулу Абдуова, Жақсылық Пернебаев, Анар Есимова, Есенбек Есимов

    This article presents an environmental assessment of technogenic waste generated by industrial enterprises in the city of Shymkent, considering its classification and environmental impact. The relevance of the study is driven by industrial growth and increasing waste volumes, which intensify pressure on air, soil, and water resources. An analysis of industrial enterprises by environmental hazard categories in accordance with the Environmental Code of the Republic of Kazakhstan was conducted. In addition, the main sources of waste generation, including metallurgical, oil refining, and chemical enterprises, were identified. The characteristics of current and historically accumulated waste were also examined. Based on field and laboratory investigations, exceedances of pollutant concentrations were identified, confirming environmental risks. In addition, remote sensing data were used to detect unauthorized waste disposal sites. The findings highlight the need to improve the waste management system and implement environmental monitoring methods to ensure the sustainable development of the region. Keywords: technogenic waste, environmental assessment, industry, pollution.

  • RESEARCH INTO THE TECHNOLOGY OF PRODUCING FIRE-RESISTANT MODIFIED YARN IN THEPRODUCTION OF CARPET TEXTILES

    by Г.с. Кенжибаева, М.т. Сихимбаев

    Бұл мақалада кілем тоқу өндірісінде қолданылатын полипропилен негізіндегі синтетикалық жіптердің технологиясы және олардың өртке төзімділігін арттыру жолдары зерттелді. Полипропилен талшықтарындағы физика-механикалық қасиеттерін атап айтқанда тозуға төзімділігі мен беріктігі және экономикалық тиімділігі жоғары болғанымен, олардың жанғыштығы негізгі кеміліктерінің бірі болып келеді. Соған байланысты талшық құрамын антиперендік қоспалармен модификациялау, технологиялық параметірлерін оңтайландыру қарастырылады.Зерттеу барасында полипропилен балқымасындағы көміртек, кремний диоксиді мен алюминий оксиді негізіндегі антиперендер енгізіліп, әр түрлі тығыздықтағы жіптер жасалады. Экструзия, созу, текстурлау мен термобекіту кезеңін жекелеп жіп сапасы анықталады. Жүргізілген тәжірибелер нәтижесінде жіптің тығыздығы артқан сайын жану уақыты мен температурасының өзгеру заңдылықтары айқындалады. Зерттеу нәтижелері бойынша құрамында 92,7c/o полипропилен, 3c/o көміртек, 0,3c/o SıO2, 1c/o Al2O3 1c/o жұмсартқыш және 2c/o бояу бар No4 үлгі ең тиімді өртке төзімді материал ретінде анықталады. Ұсынылған технология бойынша кілем жіптерінің өртке төзімділігін арттырып, олардың пайдалану қауіпсіздігін жақсартуға мүмкіндік береді. Сондай ақ мұндағы ұсынылатын технологиялық құрамы мен өндірістік процестің тұрақтылығын қамтамасыз ету, дайын өнім сапасын арттыруға мүмкіндік береді. Осы алынған нәтижелер кілем өндірісінде қауіпсіз, ұзақ мерзімді және бәсекеге қабілетті өнімдер ретінде шығаруға негіз болады.

  • Open Access

    Exploring the synergistic impact of carbon, SiO 2 , and Al 2 O 3 fillers on the properties of melt-spun polypropylene filaments

    by Makpal Sikhimbayeva, Ramazan Erdem, Gulmira Kenzhibayeva, Mariyam Yeziyeva, Ahmet Çoşgun

    The current study investigates the effects of incorporating various fillers of carbon, silica, and alumina into polypropylene (PP) filaments produced via melt-spinning, aiming to enhance their thermal and mechanical properties. Both single-type and multifiller systems were employed to assess individual and synergistic impacts on composite filament performance. PP filaments were fabricated under optimized processing conditions, and their morphological, structural, thermal, and mechanical behaviors were systematically evaluated using scanning electron microscopy combined with energy dispersive spectroscopy, Fourier transform infrared spectroscopy, and tensile tests. The results revealed that multifiller combinations significantly improved the thermal stability and mechanical strength of PP filaments, outperforming single-filler systems at equivalent loading levels (4.3 wt.%). The best-performing sample, containing a synergistic blend of all three fillers, achieved the highest thermal decomposition temperature (541°C), a notable increase in tensile strength (57 MPa), and preserved elongation at break (350%). Thermogravimetric and differential scanning colorimetric analyses confirmed the improvements in thermal resistance and melting behavior associated with optimized multifiller incorporation. In contrast, single-filler filaments, especially those with high alumina content, demonstrated limited reinforcement effects and pronounced brittleness due to poor dispersion and agglomeration.

  • Open Access

    Study of textile carpet combustion process

    by M. T. Sikhimbayeva, G. S. Kenzhibayeva, R. Erdem

    Currently, synthetic carpet products are widely used in the home, as they compare favorably with natural ones in terms of technical characteristics. This is due to their high durability, lack of tendency to rot, wide range of colors and relatively low cost of production. However, the ease, ignition and increased flammability of most synthetic carpet products result in rapid spread of fire through them, igniting other products and objects in the vicinity. The sources of the fire are usually matches, cigarettes, careless handling of fire, and short circuits. In this regard, the purpose of the study is to investigate the combustion process of textile synthetic carpet products of "Bal Textile" LLP with justification of the most rational methods of flammability and combustibility assessment. Subject of research: processes of thermo-oxidative destruction of modified polypropylene textile materials and their relationship with fire hazard properties, flammability of fiber-forming polymers. The combustion process of synthetic carpet products of Bal Textile LLP with different Heat Set yarn densities and pile lengths were investigated. Based on the research we have done, it has been concluded that the higher the pile of the carpet, the higher the level of combustion. Carpets melt when ignited and are also colored as a black liquid. The value of the conducted research is that on their basis it is possible to classify materials by degree of combustibility (flammability) and to develop requirements for synthetic carpet products of LLP "Bal Textile" of reduced fire hazard taking into account their possible application in practice.

  • Enriched plum filling for the confectionery

    by R.S. Alibekov, G.S. Kenzhibayeva, A.A. Utebaeva, K.A. Urazbayeva, L.M. Tursynbay, D.A. Kulanova

    The useful nutritional value of plum is related to the most quantity of vitamins like Vitamin A - beta carotene, Thiamin (B1), Riboflavin (B2), Niacin (B3), Pantothenic acid (B5), Vitamin B6, Folate (B9), Vitamin C, Vitamin E, Vitamin K; and minerals: Ca, Fe, Mg, Mn, Ph, K, Na and other. Plum is available in the receipts of various confectioneries: sweets, caramels, creams, jellies, cookies and others. The objective of the presented study was to develop a new of natural origin with antioxidants capacity - plum filling for the confectionery. Sensory assessment of the researched samples was provided by “JustAbout-Right-Test” questionnaire for the following main characteristics: taste, colour, odour, texture or consistence and acceptance of the product. Organoleptic and physicochemical characteristics were analyzed in accordance with the GOST 32741-2014 (Interstate standard) requirements. The content of mineral substances was determined by the method of Mass-spectrometry with inductively coupled plasma (ICP-MS) and using a Scanning Electron Microscope (SEM). As a result of the «Just-About-Right-Test» most of the respondents selected a plum filling sample with gelatin and lemon. This statement was confirmed by organoleptic and physicochemical characteristics. The mass-spectrometry database verified availability of essential macro- and microelements: sodium, magnesium, phosphorus, sulphur, potassium, calcium, iron and other. The proposed plum filling has wide range applications, as inside and outside for the covering of confectionery, thereby organoleptic properties and nutritional value of final product could be enriched.


  • Open Access

    Method for Introducing Non-metallic Particles into Composite Coatings

    by M.S. Sataev, Sh.T. Koshkarbayeva, N. K. Sarypbekova, G. S. Kenzhibayeva, G. A. Kambarova, A. Zh. Suigenbayeva

    Oriental Journal of Chemistry is a peer reviewed quarterly research journal of pure and applied chemistry. It publishes standard research papers in almost all thrust areas of current chemistry of academic and commercial importance. It provides a platform for rapid publication of quality research papers, reviews and chemistry letters. Oriental Journal of Chemistry is abstracted and indexed in almost all reputed National and International agencies.