Yuanhang Yao

As the power industry continues to advance rapidly, large-scale generators are evolving toward higher voltage levels and greater capacity. The heat accumulation associated with high voltage and large capacity accelerates the aging of the main insulation. It is necessary to enhance the thermal conductivity (λ) and dielectric properties of existing main insulation materials. This work focuses on investigating the effects of varying addition levels of two different-sized BN particles on the λ and dielectric properties of the mica tape composite dielectric. The experimental findings demonstrate a progressive enhancement in the λ of the mica tape corresponding to the incremental addition of h-BN concentration. When the doping concentration reaches 20 wt.%, the λ of the two h-BN-doped mica tape (h-BN/MT) reaches a maximum of 0.382 W/(m·K), 0.4 W/(m·K), respectively, which enhances the λ of the contrasting pure mica tape (0.199 W/(m·K)) by 91.95% and 101.01%, respectively. In terms of electrical insulation properties, both sizes of h-BN/MT perform well, with breakdown strength above 32 kV/mm. Furthermore, the second-order thermal conductivity model of mica tape doped with different sizes of h-BN was constructed by combining the Halpin–Tsai model with the Series model, which allows the calculation of λ of mica tape composites doped with different sizes of h-BN. This work provides a novel structural design approach for preparing mica tape composite dielectric that simultaneously exhibits high λ and high insulation properties.

This article investigates the application of the pulse voltage method for detecting interturn short-circuit faults in the high-voltage windings of dry-type voltage transformers. We determined the characterization parameters of the high-voltage windings of dry-type voltage transformers and trends in the variation of the characterization parameters with frequency in the presence and absence of faults. The viability of using the pulse voltage method for the detection of interturn short-circuit faults in dry-type voltage transformers was analyzed. A pulse voltage test platform was designed to analyze the response voltage waveforms using pulse-oscillating voltage experiments on transformers with various short-circuit faults. The results demonstrate that during a turn-to-turn short circuit, the equivalent resistance and inductance of a high-voltage winding are significantly lowered. When employing the pulse voltage method to investigate interturn short-circuit faults, tiny inductors are connected in parallel to produce an oscillating voltage waveform that is more uniform. Upon incurring a short circuit between turns, the pulse’s oscillating voltage frequency increases. The greater the number of turns in the short-circuit fault is, the more significant the effect of the test.

With the wide application of energy storage equipment in modern electronic and electrical systems, developing polymer-based dielectric capacitors with high-power density and rapid charge and discharge capabilities has become important. However, there are significant challenges in synergistic optimization of conventional polymer-based composites, specifically in terms of their breakdown and dielectric properties. As the basis of dielectrics, all-organic polymers have become a research hotspot in recent years, showing broad development prospects in the fields of dielectric and energy storage. This paper reviews the research progress of all-organic polymer dielectrics from the perspective of material preparation methods, with emphasis on strategies that enhance both dielectric and energy storage performance. By dividing all-organic polymer dielectrics into linear polymer dielectrics and nonlinear polymer dielectrics, the paper describes the effects of three structures (blending, filling, and multilayer) on the dielectric and energy storage properties of all-organic polymer dielectrics. Based on the above research progress, the energy storage applications of all-organic dielectrics are summarized and their prospects discussed.