CKChanghyun Kim

Changhyun Kim

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Changhyun Kim has a total of 28 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Bias-Polarity-Dependent Electrical Characteristics of 1x nm DRAM Capacitors for Robust Cryogenic Memory Applications

    by Soohong Eo, Jingyu Park, Sangwon Lee, Changwook Kim, Seonhaeng Lee, Namhyun Lee, Yoon Kim, Myounggon Kang, Rock-Hyun Baek, Changhyun Kim, et al.

    This study explores the electrical behavior of capacitors with symmetric trilayer dielectrics in 1x nm dynamic random access memories (DRAMs) for cryogenic computing. Depositing a lower dielectric layer on top of the bottom electrode (BE) triggers oxygen vacancy defect generation via a chemical reaction. Electrical measurements over a wide temperature range (370–77 K) elucidated the impact of these defects on the conduction. Applying a positive voltage to the top electrode (TE) induces more charges due to electrons trapped near the BE, leading to a faster capacitance increase. The bias-polarity-dependent transport properties of the trilayer exhibit trap-assisted tunneling (TAT) in the low-voltage regime, transitioning to Poole–Frenkel (PF) emission, and ultimately Fowler–Nordheim (FN) tunneling in the high-voltage regime. We observed weakening of abundant traps near the BE interfacial barrier, allowing PF conduction to dominate over TAT. Under constant voltage stress (CVS), the substantial accumulation of trapped electrons near the BE interface accelerates toward the opposite plate because of the electric field. This resulted in increased current due to defect generation near the TE, thereby making the capacitor vulnerable to stress. Overall, the data retention of DRAM is expected to improve because of the lower current at 77 K. However, careful design of the BE interface is critical for leakage current and stress susceptibility.


  • Open Access

    Current-Voltage Modeling of DRAM Cell Transistor Using Genetic Algorithm and Deep Learning

    by Jun Hui Park, Jung Nam Kim, Seonhaeng Lee, Gang-Jun Kim, Namhyun Lee, Rock-Hyun Baek, Dae Hwan Kim, Changhyun Kim, Myounggon Kang, Yoon Kim

    Accurate current-voltage ( I-V ) modeling based on the Berkeley short-channel insulated-gate field-effect transistor model (BSIM) is pivotal for integrated circuit simulation. However, the current BSIM model does not support a buried-channel-array transistor (BCAT), which is the structure of the state-of-the-art commercial dynamic random access memory (DRAM) cell transistor. In this work, we propose an intelligent I-V modeling technique that combines genetic algorithm (GA) and deep learning (DL). This hybrid technique facilitates both optimization of BSIM parameter and accurate I-V modeling, even for devices not originally supported by BSIM. Additionally, we extended application of the DL to model one of the principal degradation mechanisms of transistor, the hot-carrier degradation (HCD). The successful modeling results of I-V characteristic and device degradation demonstrated that devices not supported by BSIM can be accurately modeled for integrated circuit simulations.


  • Fowler–Nordheim Stress-Induced Degradation of Buried-Channel-Array Transistors in DRAM Cell for Cryogenic Memory Applications

    by Sungju Choi, Ga Won Yang, Sangwon Lee, Jingyu Park, Changwook Kim, Jun Park, Hyun-Seok Choi, Namhyun Lee, Gang-Jun Kim, Yoon Kim, et al.

    The degradation of the fin-type buried-channel-array transistor (BCAT) in dynamic random access memory (DRAM) cell is investigated under Fowler–Nordheim stress at various temperatures, including 77 K. While the increase in the OFF current is dominated by the Shockley–Read–Hall junction leakage, the threshold voltage shift ( ${\Delta} \textit{V}_{\textit{T}}$ ) comprises a positive component due to the interface trap generation and a negative component resulting from the electric field concentration-induced charge trapping into the gate insulator bulk, with respective activation energies of 0.22 and 0.13 eV. Furthermore, based on the consistency between the experimentally decomposed ${\Delta} \textit{V}_{\textit{T}}$ components and the simulated ones, it is found that the anode hole injection dominates the degradations of the wordline-active operation and refresh time in cryogenic DRAM.


  • A 1.05-to-3.2 GHz All-Digital PLL for DDR5 Registering Clock Driver With a Self-Biased Supply-Noise-Compensating Ring DCO

    by Yeonggeun Song, Han-Gon Ko, Changhyun Kim, Deog-Kyoon Jeong

    This brief presents an all-digital PLL (AD-PLL) for a DDR5 registering clock driver (RCD) with a self-biased supply-noise-compensation (SNC) technique. By combining two Nagata current sources that have opposite dependency on supply variations, it offers a constant current to a ring oscillator over a wide range of supply voltage. Thereby, the dynamic voltage droop due to variations in workload is compensated while a voltage margin for mass production is improved. Since the SNC technique operates independently of the PLL loop bandwidth without using feedback, the proposed AD-PLL is free from the stability problem associated with bandwidth overlapping. Quantitative analyses on static and dynamic characteristics of the proposed SNC technique and relevant design considerations are addressed. Fabricated in the 28-nm CMOS technology, the AD-PLL occupies an active area of 0.06 mm 2 and consumes 12.1 mW at 3.0 GHz with a 1.1 V supply voltage. The power-supply-noise-attenuation (PSNA) is measured as 40 dB and the integrated rms jitter of 271 fs is observed.


  • A 4-Gb/s/pin low-power memory I/O interface using 4-level simultaneous bi-directional signaling

    by Jin-Hyun Kim, Sua Kim, Woo-Seop Kim, Jung-Hwan Choi, Hong-Sun Hwang, Changhyun Kim, Suki Kim

    This paper presents a simultaneous bi-directional (SBD) 4-level I/O interface for high-speed DRAMs. The data rate of 4 Gb/s/pin was demonstrated using a 500-MHz clock generator and a full CMOS rail-to-rail power swing. The power consumed by the I/O circuit was measured to be 28 mW/pin, when connected to a 10-pF load, at a 1.8-V supply voltage. The transmitter uses a 4-level push-pull linear output driver and a 4-level automatic impedance controller, achieving the reduction of driver currents and the voltage margin as large as 200 mV. The receiver employs a hierarchical sampling scheme, wherein a differential amplifier selects three out of six reference voltage levels. This scheme ensures minimized sampling power and a wide common-mode sampling range. The 6-level reference voltage for sampling is generated by the combination of the transmitter replica. The proposed I/O interface circuits are fabricated using a 0.10-/spl mu/m, 2-metal layers DRAM process, and the active area is 330 /spl times/ 66 /spl mu/m/sup 2/. It exhibits 200 mV /spl times/ 690 ps eye windows on the given channel with a 1.8-V supply voltage.