A 1.05-to-3.2 GHz All-Digital PLL for DDR5 Registering Clock Driver With a Self-Biased Supply-Noise-Compensating Ring DCO
- 28 October 2021
- journal article
- research article
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Circuits and Systems II: Express Briefs
- Vol. 69 (3) , 759-763
Abstract
This brief presents an all-digital PLL (AD-PLL) for a DDR5 registering clock driver (RCD) with a self-biased supply-noise-compensation (SNC) technique. By combining two Nagata current sources that have opposite dependency on supply variations, it offers a constant current to a ring oscillator over a wide range of supply voltage. Thereby, the dynamic voltage droop due to variations in workload is compensated while a voltage margin for mass production is improved. Since the SNC technique operates independently of the PLL loop bandwidth without using feedback, the proposed AD-PLL is free from the stability problem associated with bandwidth overlapping. Quantitative analyses on static and dynamic characteristics of the proposed SNC technique and relevant design considerations are addressed. Fabricated in the 28-nm CMOS technology, the AD-PLL occupies an active area of 0.06 mm 2 and consumes 12.1 mW at 3.0 GHz with a 1.1 V supply voltage. The power-supply-noise-attenuation (PSNA) is measured as 40 dB and the integrated rms jitter of 271 fs is observed.Keywords
Funding Information
- ONE Semiconductor
This publication has 13 references indexed in Scilit:
- Fractional-N DPLL-Based Low-Power Clocking Architecture for 1–14 Gb/s Multi-Standard TransmitterIEEE Journal of Solid-State Circuits, 2017
- A simple current reference with low sensitivity to supply voltage and temperature2017
- A supply noise insensitive PLL with a rail-to-rail swing ring oscillator and a wideband noise suppression loop2017
- Simple reference current source insensitive to power supply voltage variation - improved Minoru Nagata current source2016
- 19.5 A 3.2GHz digital phase-locked loop with background supply-noise cancellation2016
- 19.4 A 0.17-to-3.5mW 0.15-to-5GHz SoC PLL with 15dB built-in supply noise rejection and self-bandwidth control in 14nm CMOS2016
- 15.2 A 0.012mm2 3.1mW bang-bang digital fractional-N PLL with a power-supply-noise cancellation technique and a walking-one-phase-selection fractional frequency divider2014
- 15.3 A 2.4GHz ADPLL with digital-regulated supply-noise-insensitive and temperature-self-compensated ring DCO2014
- 5.6 Adaptive clocking system for improved power efficiency in a 28nm x86-64 microprocessor2014
- A 0.7-to-3.5 GHz 0.6-to-2.8 mW Highly Digital Phase-Locked Loop With Bandwidth TrackingIEEE Journal of Solid-State Circuits, 2011