Junju Xie
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Junju Xie has a total of 64 co-authors. Here are the top co-authors by number of shared publications:
Kewei Li
Institute of Geophysics, China Earthquake Administration, Beijing, China
4 shared publications- Xiaojun Li
Key Laboratory of Urban Security and Disaster Engineering, Ministry of Education, Beijing University of Technology, Beijing 100124, China
4 shared publications Wencai Wang
3 shared publicationsXiaojun Li
3 shared publicationsZhao An
3 shared publicationsGuoliang Lin
Yunnan Earthquake Administration, Kunming, China
2 shared publications
Latest Publications
- 10 November 2026
- Published by Seismological Society of America (SSA) in Bulletin of the Seismological Society of America
Short-Distance Attenuation Characteristics and Ground-Motion Model for Induced Earthquakes in the Rongxian Shale-Gas Region, Sichuan Basin, China
The Rongxian shale gas field in the southern Sichuan basin has experienced increasing induced seismicity, with frequent earthquakes adversely impacting local communities and even causing casualties. In this study, we investigate the short-distance attenuation characteristics of strong ground motions from induced earthquakes with local magnitudes (ML) ranging from 2.0 to 3.9, using 7249 high-quality recordings selected from a total of 11,161 accelerograms captured by a dense network of 52 microelectromechanical systems accelerometers. To ensure data reliability, we evaluate a deep-learning denoising technique for the acceleration records and apply a magnitude-dependent usable-period cutoff. Our analysis reveals that the induced earthquakes in Rongxian exhibit regional attenuation and source-scaling features distinct from those of the selected reference ground-motion models (GMMs). Specifically, the BSSA14 model (Boore, Stewart, et al., 2014), developed within the Next Generation Attenuation-West2 project, shows distance-dependent residual trends for peak ground acceleration (PGA) and selected short-period intensity measures, whereas the induced-seismicity NAA18 model (Novakovic et al., 2018) provides a more compatible reference but retains period- and magnitude-dependent residuals. To address these discrepancies, we developed a region-specific GMM using nonlinear mixed-effects regression. Within the observed moment magnitude range (Mw 1.8–3.7), the model successfully reproduces the main attenuation and source-scaling behavior of horizontal RotD50 PGA, peak ground velocity, and spectral accelerations with residuals generally centered near zero. For larger-magnitude scenarios, the GMM smoothly transitions from the empirically calibrated model to relative magnitude–distance scaling derived from regional stochastic simulations, with extrapolated predictions explicitly distinguished from the empirical calibration range. These findings highlight the ground-motion characteristics of induced seismicity in the Rongxian shale-gas region and provide a regional ground-motion basis for rapidly estimating short-distance shaking and the spatial extent of felt or affected areas, including the consideration of selected source-model epistemic uncertainty beyond the observed magnitude range.
- 10 November 2026
- Published by Seismological Society of America (SSA) in Bulletin of the Seismological Society of America
Short-Distance Attenuation Characteristics and Ground-Motion Model for Induced Earthquakes in the Rongxian Shale-Gas Region, Sichuan Basin, China
The Rongxian shale gas field in the southern Sichuan basin has experienced increasing induced seismicity, with frequent earthquakes adversely impacting local communities and even causing casualties. In this study, we investigate the short-distance attenuation characteristics of strong ground motions from induced earthquakes with local magnitudes (ML) ranging from 2.0 to 3.9, using 7249 high-quality recordings selected from a total of 11,161 accelerograms captured by a dense network of 52 microelectromechanical systems accelerometers. To ensure data reliability, we evaluate a deep-learning denoising technique for the acceleration records and apply a magnitude-dependent usable-period cutoff. Our analysis reveals that the induced earthquakes in Rongxian exhibit regional attenuation and source-scaling features distinct from those of the selected reference ground-motion models (GMMs). Specifically, the BSSA14 model (Boore, Stewart, et al., 2014), developed within the Next Generation Attenuation-West2 project, shows distance-dependent residual trends for peak ground acceleration (PGA) and selected short-period intensity measures, whereas the induced-seismicity NAA18 model (Novakovic et al., 2018) provides a more compatible reference but retains period- and magnitude-dependent residuals. To address these discrepancies, we developed a region-specific GMM using nonlinear mixed-effects regression. Within the observed moment magnitude range (Mw 1.8–3.7), the model successfully reproduces the main attenuation and source-scaling behavior of horizontal RotD50 PGA, peak ground velocity, and spectral accelerations with residuals generally centered near zero. For larger-magnitude scenarios, the GMM smoothly transitions from the empirically calibrated model to relative magnitude–distance scaling derived from regional stochastic simulations, with extrapolated predictions explicitly distinguished from the empirical calibration range. These findings highlight the ground-motion characteristics of induced seismicity in the Rongxian shale-gas region and provide a regional ground-motion basis for rapidly estimating short-distance shaking and the spatial extent of felt or affected areas, including the consideration of selected source-model epistemic uncertainty beyond the observed magnitude range.
- Open Access
Analysis of Plastic Damage in Tunnel Portal Sections Under Obliquely Incident SV Waves
The tunnel portal section is one of the most seismically vulnerable parts of a tunnel, where strong earthquakes may trigger slope instability and induce plastic damage in the tunnel lining. Based on viscous-spring artificial boundary theory, a seismic oblique-incidence method applicable to tunnel portal sections is developed by incorporating the effects of slope topography. A three-dimensional finite element model is then established to investigate the seismic response and damage mechanisms of the tunnel portal section subjected to obliquely incident SV waves. The numerical calculation results in this study indicate that fully connected plastic deformation zones eventually develop in both the original slope site and the slope site with a tunnel structure, leading to slope instability characterized by downward sliding of the rock mass along a slip surface. However, in the presence of a tunnel structure, plastic deformation initiates simultaneously at the slope toe and near the tunnel portal. The maximum plastic strain is concentrated near the tunnel portal. Both topographic amplification and the accumulation of sliding debris markedly aggravate lining damage. The seismic-wave incidence angle, ground conditions and seismic-wave spectral characteristics all have pronounced effects on plastic deformation in both the slope site and tunnel lining at the tunnel portal section. In addition, tensile damage is more pronounced and extends over a wider area than compressive damage. At shear-wave velocities of 450–550 m/s in the upper soft-rock site, the damage zone is approximately two to three times the horizontal projection length of the slope, which is identified as the primary damage zone and should be regarded as a key seismic fortification area in tunnel design.
Open AccessAnalysis of Plastic Damage in Tunnel Portal Sections Under Obliquely Incident SV Waves
The tunnel portal section is one of the most seismically vulnerable parts of a tunnel, where strong earthquakes may trigger slope instability and induce plastic damage in the tunnel lining. Based on viscous-spring artificial boundary theory, a seismic oblique-incidence method applicable to tunnel portal sections is developed by incorporating the effects of slope topography. A three-dimensional finite element model is then established to investigate the seismic response and damage mechanisms of the tunnel portal section subjected to obliquely incident SV waves. The numerical calculation results in this study indicate that fully connected plastic deformation zones eventually develop in both the original slope site and the slope site with a tunnel structure, leading to slope instability characterized by downward sliding of the rock mass along a slip surface. However, in the presence of a tunnel structure, plastic deformation initiates simultaneously at the slope toe and near the tunnel portal. The maximum plastic strain is concentrated near the tunnel portal. Both topographic amplification and the accumulation of sliding debris markedly aggravate lining damage. The seismic-wave incidence angle, ground conditions and seismic-wave spectral characteristics all have pronounced effects on plastic deformation in both the slope site and tunnel lining at the tunnel portal section. In addition, tensile damage is more pronounced and extends over a wider area than compressive damage. At shear-wave velocities of 450–550 m/s in the upper soft-rock site, the damage zone is approximately two to three times the horizontal projection length of the slope, which is identified as the primary damage zone and should be regarded as a key seismic fortification area in tunnel design.
- 10 July 2026
- Published by Seismological Society of America (SSA) in Bulletin of the Seismological Society of America
Strong-Motion Attenuation Characteristics in Sichuan Basin Derived from Densely Distributed Records and Its Implications for Ground-Motion Modeling
Despite being located in a stable tectonic zone, the Sichuan basin is surrounded by several major faults. During the 2008 Wenchuan earthquake, the isoseismal intensities attenuated more slowly eastward into the Sichuan basin than westward. Nevertheless, this effect has not been well assessed due to the long-term lack of strong-motion records. In this study, we investigate the strong ground motion attenuation characteristics in the Sichuan basin using densely distributed records from ten moderate-to-large earthquakes recorded in recent years, including the 2022 Ms 6.1 Lushan earthquake and the 2022 Ms 6.8 Luding earthquake. Our data show that attenuation in the basin exhibits a plateau at source distances of 80–160 km at periods up to approximately 0.5 s. Analysis of the time histories indicates that the observed plateau is attributable to constructive interference between the direct wave and the postcritical reflection from the Moho discontinuity. We also observed lower anelastic attenuation rates and significantly smaller within-event variability for the Sichuan basin than western and southern Sichuan, based on mixed-effects ground-motion models developed for the regions. These results are consistent with the more homogeneous crustal structure and gentler topography of the basin. We recommend a four-segment geometric attenuation function with distance breakpoints at 80, 150, and 240 km for the Sichuan basin, as it provides a statistically superior fit and more effectively captures the complex characteristics of far-field attenuation compared with the conventional three-segment model.
- 10 July 2026
- Published by Seismological Society of America (SSA) in Bulletin of the Seismological Society of America
Strong-Motion Attenuation Characteristics in Sichuan Basin Derived from Densely Distributed Records and Its Implications for Ground-Motion Modeling
Despite being located in a stable tectonic zone, the Sichuan basin is surrounded by several major faults. During the 2008 Wenchuan earthquake, the isoseismal intensities attenuated more slowly eastward into the Sichuan basin than westward. Nevertheless, this effect has not been well assessed due to the long-term lack of strong-motion records. In this study, we investigate the strong ground motion attenuation characteristics in the Sichuan basin using densely distributed records from ten moderate-to-large earthquakes recorded in recent years, including the 2022 Ms 6.1 Lushan earthquake and the 2022 Ms 6.8 Luding earthquake. Our data show that attenuation in the basin exhibits a plateau at source distances of 80–160 km at periods up to approximately 0.5 s. Analysis of the time histories indicates that the observed plateau is attributable to constructive interference between the direct wave and the postcritical reflection from the Moho discontinuity. We also observed lower anelastic attenuation rates and significantly smaller within-event variability for the Sichuan basin than western and southern Sichuan, based on mixed-effects ground-motion models developed for the regions. These results are consistent with the more homogeneous crustal structure and gentler topography of the basin. We recommend a four-segment geometric attenuation function with distance breakpoints at 80, 150, and 240 km for the Sichuan basin, as it provides a statistically superior fit and more effectively captures the complex characteristics of far-field attenuation compared with the conventional three-segment model.
- 17 July 2025
- Published by American Geophysical Union (AGU) in Journal of Geophysical Research: Solid Earth
- Vol. 130 (7)
An Ensemble Deep Learning‐Based Acoustic Emission Picking Model Reveals Migratory Foreshocks on Large‐Scale Laboratory Fault
Acoustic emissions (AEs) occurring during the frictional stick‐slip experiment are crucial for predicting fault failure and understanding the nucleation mechanism of laboratory‐scale earthquakes. However, detecting and picking their primary arrival phase (P‐phase) in a complete manner remains a challenging task, especially when processing large data sets from a multi‐channel continuous AE recording system throughout the laboratory earthquake cycles. In this study, we propose an Ensemble Deep Learning (EDL)‐based supervised model named “AEbagging,” which comprises two individual feature extraction Deep Neural Networks serving as an encoder, and an EDL‐based decoder for laboratory earthquake detection and phase picking. We conduct biaxial stick‐slip experiment on a 0.85 m saw‐cut granodiorite fault. By applying our model to the eight stick‐slip events, we demonstrate its powerful capability in event detection and phase‐picking. With the stacked pre‐seismic AE sequences from the model‐generated AE catalogs, we not only observe a precursory decrease in the ‐value but also a migratory foreshock process from the lower right segment of the fault toward the upper left end during the nucleation phase. We discuss the possibility that such migratory foreshock activities are related to stress heterogeneities induced by fault surface roughness. This work demonstrates that the AEbagging model not only contributes to a better understanding of the spatiotemporal evolution of seismicity during laboratory fault instability, but also has potential for broad application in disciplines ranging from engineering to geophysics.
- 17 July 2025
- Published by American Geophysical Union (AGU) in Journal of Geophysical Research: Solid Earth
- Vol. 130 (7)
An Ensemble Deep Learning‐Based Acoustic Emission Picking Model Reveals Migratory Foreshocks on Large‐Scale Laboratory Fault
Acoustic emissions (AEs) occurring during the frictional stick‐slip experiment are crucial for predicting fault failure and understanding the nucleation mechanism of laboratory‐scale earthquakes. However, detecting and picking their primary arrival phase (P‐phase) in a complete manner remains a challenging task, especially when processing large data sets from a multi‐channel continuous AE recording system throughout the laboratory earthquake cycles. In this study, we propose an Ensemble Deep Learning (EDL)‐based supervised model named “AEbagging,” which comprises two individual feature extraction Deep Neural Networks serving as an encoder, and an EDL‐based decoder for laboratory earthquake detection and phase picking. We conduct biaxial stick‐slip experiment on a 0.85 m saw‐cut granodiorite fault. By applying our model to the eight stick‐slip events, we demonstrate its powerful capability in event detection and phase‐picking. With the stacked pre‐seismic AE sequences from the model‐generated AE catalogs, we not only observe a precursory decrease in the ‐value but also a migratory foreshock process from the lower right segment of the fault toward the upper left end during the nucleation phase. We discuss the possibility that such migratory foreshock activities are related to stress heterogeneities induced by fault surface roughness. This work demonstrates that the AEbagging model not only contributes to a better understanding of the spatiotemporal evolution of seismicity during laboratory fault instability, but also has potential for broad application in disciplines ranging from engineering to geophysics.
- Open Access
- 6 May 2025
- Published by Elsevier in Soil Dynamics and Earthquake Engineering
- Vol. 196
Usability of records by China earthquake early warning network for ground motion modeling
- 6 May 2025
- Published by Elsevier in Soil Dynamics and Earthquake Engineering
- Vol. 196
Open AccessUsability of records by China earthquake early warning network for ground motion modeling
- 20 February 2025
- Published by Seismological Society of America (SSA) in Seismological Research Letters
- Vol. 96 (4) , 2115-2127
Source Parameters and Ground-Motion Simulation of the 2023 Mw 5.5 Pingyuan Earthquake in the North China Plain
The North China Plain (NCP) is a tectonically active region that has experienced several devastating earthquakes over the last century. However, its seismic activity has been relatively low for nearly half a century since the 1976 Mw 7.6 and 7.0 Tangshan earthquakes. In August 2023, an Mw 5.5 earthquake struck Pingyuan County, Shandong Province. It was the largest earthquake in the NCP in the last 40 yr and resulted in unexpected ground shaking. This event was well recorded by local strong-motion accelerometers and regional broadband seismometers, providing a valuable opportunity to investigate its seismogenesis and assess seismic hazards in the NCP. In this study, we determine the source parameters of the Mw 5.5 Pingyuan earthquake and investigate the effects of unconsolidated sediments on ground motions. Using the Cut-And-Paste inversion and depth-phase waveform modeling methods, we accurately determine the focal mechanism and depth of the earthquake. Our results indicate right-lateral strike-slip motion on a deep-seated fault with a focal depth of 17 km. Ground-motion simulations, based on the determined source parameters and a detailed 3D velocity model, reveal significant ground-motion amplification in sedimentary basins, correlating with the thickness of unconsolidated sediments. Our study underscores the importance of subsurface structures in ground-motion prediction and seismic hazard assessment, particularly in the context of future large earthquakes in the NCP.
- 20 February 2025
- Published by Seismological Society of America (SSA) in Seismological Research Letters
- Vol. 96 (4) , 2115-2127
Source Parameters and Ground-Motion Simulation of the 2023 Mw 5.5 Pingyuan Earthquake in the North China Plain
The North China Plain (NCP) is a tectonically active region that has experienced several devastating earthquakes over the last century. However, its seismic activity has been relatively low for nearly half a century since the 1976 Mw 7.6 and 7.0 Tangshan earthquakes. In August 2023, an Mw 5.5 earthquake struck Pingyuan County, Shandong Province. It was the largest earthquake in the NCP in the last 40 yr and resulted in unexpected ground shaking. This event was well recorded by local strong-motion accelerometers and regional broadband seismometers, providing a valuable opportunity to investigate its seismogenesis and assess seismic hazards in the NCP. In this study, we determine the source parameters of the Mw 5.5 Pingyuan earthquake and investigate the effects of unconsolidated sediments on ground motions. Using the Cut-And-Paste inversion and depth-phase waveform modeling methods, we accurately determine the focal mechanism and depth of the earthquake. Our results indicate right-lateral strike-slip motion on a deep-seated fault with a focal depth of 17 km. Ground-motion simulations, based on the determined source parameters and a detailed 3D velocity model, reveal significant ground-motion amplification in sedimentary basins, correlating with the thickness of unconsolidated sediments. Our study underscores the importance of subsurface structures in ground-motion prediction and seismic hazard assessment, particularly in the context of future large earthquakes in the NCP.
- Open Access
- 12 January 2023
- Published by Frontiers Media SA in Frontiers in Earth Science
- Vol. 10
Quantification of rupture directivity effects on strong ground motion during the 8 January 2022 MS6.9 Menyuan earthquake in Qinghai, China
On 8 January 2022, an MS6.9 earthquake occurred in the Menyuan county, Qinghai province at the northeastern margin of the Tibetan Plateau. A dense observatory network consisting of accelerographs and intensity meters has obtained many acceleration recordings in this region, which previously had only a few strong motion recordings. Using acceleration data recorded by 141 accelerographs and micro-electro mechanical system (MEMS)-based intensity meters within 100 km of the causative fault, we investigated the spatial distribution and attenuation characteristics of the near-source ground motion during this event. The observed response spectra were compared with the prediction obtained using the NGA-West2 models. It was found that, in the long-period section of >1.0 s, the acceleration response spectra in the rupture forward direction (southeast of the epicenter) were greater than the prediction, while observations on the northwest side were lower than the prediction. Through the spatial distribution of the ground motion and quantitative analysis of the residuals, we found that the rupture directivity effects on the ground motions were controlled by the spatial azimuth relative to the fault and the along-strike projected length of the rupture, which mainly affected the long-period portion of the >1.0 s. In the rupture forward direction, the spectral accelerations (SAs) with periods of 1.0–10.0 s were enhanced to 1.18–1.56 times the average. In the backward direction (northwest of the epicenter), the SAs with periods of 1.0–10.0 s were only 0.63–0.86 times the average. The rupture directivity effects during the MS6.9 (MW6.6) earthquake exhibited an obvious period-dependence and narrowband characteristics, and the amplification effects were the strongest at 5.0 s. The amplification factors in the straight forward directions were underestimated by the empirical model. Two typical velocity pulse records were observed in the rupture forward direction, and their response spectra were significantly amplified at long periods of greater than 1.0 s, with peak amplification values of 4.0–6.0 near the characteristic period of the pulses. This amplification was related to the resonance excited by a specific periodic pulse. Our study provides a reference of quantifying near-source effects for both moderate and major shallow crustal earthquakes by using MEMS recordings in this region.
- 12 January 2023
- Published by Frontiers Media SA in Frontiers in Earth Science
- Vol. 10
Open AccessQuantification of rupture directivity effects on strong ground motion during the 8 January 2022 MS6.9 Menyuan earthquake in Qinghai, China
On 8 January 2022, an MS6.9 earthquake occurred in the Menyuan county, Qinghai province at the northeastern margin of the Tibetan Plateau. A dense observatory network consisting of accelerographs and intensity meters has obtained many acceleration recordings in this region, which previously had only a few strong motion recordings. Using acceleration data recorded by 141 accelerographs and micro-electro mechanical system (MEMS)-based intensity meters within 100 km of the causative fault, we investigated the spatial distribution and attenuation characteristics of the near-source ground motion during this event. The observed response spectra were compared with the prediction obtained using the NGA-West2 models. It was found that, in the long-period section of >1.0 s, the acceleration response spectra in the rupture forward direction (southeast of the epicenter) were greater than the prediction, while observations on the northwest side were lower than the prediction. Through the spatial distribution of the ground motion and quantitative analysis of the residuals, we found that the rupture directivity effects on the ground motions were controlled by the spatial azimuth relative to the fault and the along-strike projected length of the rupture, which mainly affected the long-period portion of the >1.0 s. In the rupture forward direction, the spectral accelerations (SAs) with periods of 1.0–10.0 s were enhanced to 1.18–1.56 times the average. In the backward direction (northwest of the epicenter), the SAs with periods of 1.0–10.0 s were only 0.63–0.86 times the average. The rupture directivity effects during the MS6.9 (MW6.6) earthquake exhibited an obvious period-dependence and narrowband characteristics, and the amplification effects were the strongest at 5.0 s. The amplification factors in the straight forward directions were underestimated by the empirical model. Two typical velocity pulse records were observed in the rupture forward direction, and their response spectra were significantly amplified at long periods of greater than 1.0 s, with peak amplification values of 4.0–6.0 near the characteristic period of the pulses. This amplification was related to the resonance excited by a specific periodic pulse. Our study provides a reference of quantifying near-source effects for both moderate and major shallow crustal earthquakes by using MEMS recordings in this region.
- Open Access
- 4 January 2023
- Published by Frontiers Media SA in Frontiers in Earth Science
- Vol. 10
Seismic response analysis of slope sites exposed to obliquely incident P waves
This study proposes a seismic input method for layered slope sites exposed to obliquely-incident seismic waves which transforms the waves into equivalent nodal forces that act on the truncated boundary of a finite element model. The equivalent nodal forces at the left and right boundaries are obtained by combining the free field response of a one-dimensional layered model with a viscoelastic boundary. The equivalent nodal forces at the bottom boundary are obtained by combining the incident wave field with the viscoelastic boundary. This proposed seismic input method for slope sites exposed to obliquely incident seismic waves is implemented with the aid of MATLAB software; it is applied to the seismic response analysis of slope sites in the commercial finite element ABAQUS software. The calculation results are compared with the reference solutions obtained by using the extended model to verify the correctness of the established seismic input method. The proposed seismic input method is then employed to investigate the influencing factors of the seismic response of layered slope sites exposed to oblique incidence P waves. The results show that the angle of incidence, location of the interface between soft and hard rocks, and impedance ratio have significant effects on the seismic landslide.
- 4 January 2023
- Published by Frontiers Media SA in Frontiers in Earth Science
- Vol. 10
Open AccessSeismic response analysis of slope sites exposed to obliquely incident P waves
This study proposes a seismic input method for layered slope sites exposed to obliquely-incident seismic waves which transforms the waves into equivalent nodal forces that act on the truncated boundary of a finite element model. The equivalent nodal forces at the left and right boundaries are obtained by combining the free field response of a one-dimensional layered model with a viscoelastic boundary. The equivalent nodal forces at the bottom boundary are obtained by combining the incident wave field with the viscoelastic boundary. This proposed seismic input method for slope sites exposed to obliquely incident seismic waves is implemented with the aid of MATLAB software; it is applied to the seismic response analysis of slope sites in the commercial finite element ABAQUS software. The calculation results are compared with the reference solutions obtained by using the extended model to verify the correctness of the established seismic input method. The proposed seismic input method is then employed to investigate the influencing factors of the seismic response of layered slope sites exposed to oblique incidence P waves. The results show that the angle of incidence, location of the interface between soft and hard rocks, and impedance ratio have significant effects on the seismic landslide.