Haifeng Fang
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Haifeng Fang has a total of 32 co-authors. Here are the top co-authors by number of shared publications:
Lihua Cai
College of Mechanical Engineering Jiangsu University of Science & Technology Zhenjiang Jiangsu China
3 shared publications- H. N. Yin
College of Mechanical Engineering, Jiangsu University of Science & Technology, Zhenjiang, Jiangsu, 212100, China
2 shared publications - Jihua Fan
Jiangsu University of Science and Technology
2 shared publications Mingqiang Wang
2 shared publications- Changxin Chen
School of Mechatronics and Power Engineering, Jiangsu University of Science and Technology, Zhangjiagang, China
1 shared publication Dianxu Ruan
Shazhou Professional Institute of Technology Suzhou Jiangsu China
1 shared publication
Latest Publications
- Open Access
- 1 May 2026
- Published by Academic World Research in Journal of Applied Fluid Mechanics
- Vol. 19 (5) , 1188-1204
Optimization of Bubble Tube Design for Enhanced Wafer Cleaning Tank Performance
The structural design of bubble tubes plays a crucial role in optimizing the operational efficiency of bubble systems and improving wafer cleanliness in semiconductor cleaning equipment. This study explores the impact of three distinct bubble tube geometries on system performance under identical operating conditions and a fixed number of bubble holes, aiming to identify the optimal configuration. A coupled computational fluid dynamics and population balance model simulation approach was employed to model key multiphase flow parameters. The analysis focused on gas distribution patterns, bubble size dispersion, and velocity profiles within the cleaning tank. Results reveal that the bubble tube geometry significantly influences multiphase flow behavior. Among the examined designs, the U-shaped elbow tube, featuring multiple bends, enables a broader spatial layout and a larger effective surface area within the tank. This configuration achieves improved gas retention, more uniform bubble size distribution, and enhanced flow homogeneity. Furthermore, the study evaluated the effects of process parameters, including gas flow rate, aperture diameter, and aperture spacing, based on the U-shaped elbow tube design. The findings indicate that both gas flow rate and aperture diameter are positively correlated with gas dispersion and bubble size, but inversely related to flow uniformity. The optimal operating conditions determined were a gas flow rate of 9 L, an aperture diameter of 1 mm, and an aperture spacing of 46 mm. Overall, this research provides valuable insights into the structural optimization of porous bubble tubes and the evaluation of nitrogen bubbling processes, contributing to improved wafer cleaning efficiency.
- 1 May 2026
- Published by Academic World Research in Journal of Applied Fluid Mechanics
- Vol. 19 (5) , 1188-1204
Open AccessOptimization of Bubble Tube Design for Enhanced Wafer Cleaning Tank Performance
The structural design of bubble tubes plays a crucial role in optimizing the operational efficiency of bubble systems and improving wafer cleanliness in semiconductor cleaning equipment. This study explores the impact of three distinct bubble tube geometries on system performance under identical operating conditions and a fixed number of bubble holes, aiming to identify the optimal configuration. A coupled computational fluid dynamics and population balance model simulation approach was employed to model key multiphase flow parameters. The analysis focused on gas distribution patterns, bubble size dispersion, and velocity profiles within the cleaning tank. Results reveal that the bubble tube geometry significantly influences multiphase flow behavior. Among the examined designs, the U-shaped elbow tube, featuring multiple bends, enables a broader spatial layout and a larger effective surface area within the tank. This configuration achieves improved gas retention, more uniform bubble size distribution, and enhanced flow homogeneity. Furthermore, the study evaluated the effects of process parameters, including gas flow rate, aperture diameter, and aperture spacing, based on the U-shaped elbow tube design. The findings indicate that both gas flow rate and aperture diameter are positively correlated with gas dispersion and bubble size, but inversely related to flow uniformity. The optimal operating conditions determined were a gas flow rate of 9 L, an aperture diameter of 1 mm, and an aperture spacing of 46 mm. Overall, this research provides valuable insights into the structural optimization of porous bubble tubes and the evaluation of nitrogen bubbling processes, contributing to improved wafer cleaning efficiency.
- Open Access
- 23 November 2025
- Published by Wiley in Asia-Pacific Journal of Chemical Engineering
- Vol. 21 (1)
Research on Optimization of Flow Field and Combustion Performance in Boilers With Combined Near‐Wall Air Supply Systems
In the pulverized coal boiler industry, reducing NO x emissions has become a critical objective. Although low‐NO x combustion technologies are effective, they may lead to localized high‐temperature corrosion. To address this issue, near‐wall air supply technology has been introduced, which involves injecting an appropriate amount of air near the furnace walls to form a protective oxidizing layer, thereby diluting fuel concentration to prevent the formation of localized hot spots and preventing reductive gases from contacting water‐cooled walls, thus reducing the deposition of corrosive materials. This study innovatively proposes the concept of a combined near‐wall air supply system, designing three layout forms—square, crisscross, and triangular configurations—based on different application scenarios, and adjusts the positions of nozzles on the front, rear, left, and right walls as well as the jet velocities to evaluate their impact on the boiler's combustion characteristics. Simulation results show that with a crisscross configuration and nozzles installed on all four walls, combined with a jet velocity of 5 m/s, the most effective promotion of uniform temperature distribution can be achieved, avoiding material failure due to localized overheating and enhancing overall combustion efficiency. This approach not only reduces NO x emissions by approximately 10% but also decreases the concentration of reductive atmospheres that cause high‐temperature corrosion. This demonstrates that the optimized near‐wall air supply system significantly improves boiler performance.
- 23 November 2025
- Published by Wiley in Asia-Pacific Journal of Chemical Engineering
- Vol. 21 (1)
Open AccessResearch on Optimization of Flow Field and Combustion Performance in Boilers With Combined Near‐Wall Air Supply Systems
In the pulverized coal boiler industry, reducing NO x emissions has become a critical objective. Although low‐NO x combustion technologies are effective, they may lead to localized high‐temperature corrosion. To address this issue, near‐wall air supply technology has been introduced, which involves injecting an appropriate amount of air near the furnace walls to form a protective oxidizing layer, thereby diluting fuel concentration to prevent the formation of localized hot spots and preventing reductive gases from contacting water‐cooled walls, thus reducing the deposition of corrosive materials. This study innovatively proposes the concept of a combined near‐wall air supply system, designing three layout forms—square, crisscross, and triangular configurations—based on different application scenarios, and adjusts the positions of nozzles on the front, rear, left, and right walls as well as the jet velocities to evaluate their impact on the boiler's combustion characteristics. Simulation results show that with a crisscross configuration and nozzles installed on all four walls, combined with a jet velocity of 5 m/s, the most effective promotion of uniform temperature distribution can be achieved, avoiding material failure due to localized overheating and enhancing overall combustion efficiency. This approach not only reduces NO x emissions by approximately 10% but also decreases the concentration of reductive atmospheres that cause high‐temperature corrosion. This demonstrates that the optimized near‐wall air supply system significantly improves boiler performance.
- 20 November 2025
- Published by Elsevier in Applied Thermal Engineering
- Vol. 284
Performance of lithium-ion battery cooling plates based on topology optimization and bionic design
- 20 November 2025
- Published by Elsevier in Applied Thermal Engineering
- Vol. 284
Performance of lithium-ion battery cooling plates based on topology optimization and bionic design
- 20 November 2024
- Published by Elsevier in Flow Measurement and Instrumentation
- Vol. 101
Transmission channel and nozzle optimization of silicon drying cylinder based on CFD
- 20 November 2024
- Published by Elsevier in Flow Measurement and Instrumentation
- Vol. 101
Transmission channel and nozzle optimization of silicon drying cylinder based on CFD
- 5 October 2024
- Published by SAGE Publications in Journal of Reinforced Plastics and Composites
- Vol. 45 (3-4) , 747-764
Research on the impact mechanism and parameter optimization of RTP structure layer fusion process
Fiber-reinforced thermoplastic composite pipes (RTP) possess a complex multilayer structure. Apart from the melting process of the reinforced layer, the melting process between the inner and outer layers and the reinforced layer is equally crucial. Factors such as heating time, heating temperature, and pipe diameter significantly influence the degree of tight bonding between these layers. The purpose of this study is to investigate the influence mechanism of the fusion process between the three main layers of RTP and to perform parameter optimization analysis. First, Box-Behnken response surface method and finite element analysis were used to obtain the softened layer thickness under different parameters and to couple the influence mechanism of process parameters on the softened layer thickness. Then, single parameter sensitivity analysis was used to reveal the influence mechanism of each parameter change on the softened layer thickness of the pipe, and then the coupling analysis of the process parameters was carried out. The analysis results show that the softened layer thickness is most sensitive to the change of heating temperature, followed by heating time and pipe diameter. Finally, the optimal parameter combination was obtained through the expected function method, and experiments were conducted on finished pipes.
- 5 October 2024
- Published by SAGE Publications in Journal of Reinforced Plastics and Composites
- Vol. 45 (3-4) , 747-764
Research on the impact mechanism and parameter optimization of RTP structure layer fusion process
Fiber-reinforced thermoplastic composite pipes (RTP) possess a complex multilayer structure. Apart from the melting process of the reinforced layer, the melting process between the inner and outer layers and the reinforced layer is equally crucial. Factors such as heating time, heating temperature, and pipe diameter significantly influence the degree of tight bonding between these layers. The purpose of this study is to investigate the influence mechanism of the fusion process between the three main layers of RTP and to perform parameter optimization analysis. First, Box-Behnken response surface method and finite element analysis were used to obtain the softened layer thickness under different parameters and to couple the influence mechanism of process parameters on the softened layer thickness. Then, single parameter sensitivity analysis was used to reveal the influence mechanism of each parameter change on the softened layer thickness of the pipe, and then the coupling analysis of the process parameters was carried out. The analysis results show that the softened layer thickness is most sensitive to the change of heating temperature, followed by heating time and pipe diameter. Finally, the optimal parameter combination was obtained through the expected function method, and experiments were conducted on finished pipes.
- 18 July 2024
- Published by Springer Nature in Journal of Vibration Engineering & Technologies
- Vol. 12 (S2) , 1751-1765
Absolute Nodal Coordinate Formulation Based on Moving Least Square Method for Plane Flexible Beam
- 18 July 2024
- Published by Springer Nature in Journal of Vibration Engineering & Technologies
- Vol. 12 (S2) , 1751-1765
Absolute Nodal Coordinate Formulation Based on Moving Least Square Method for Plane Flexible Beam
- 7 May 2024
- Published by Emerald Publishing in International Journal of Clothing Science and Technology
- Vol. 36 (4) , 582-598
Structure analysis of double comb about jet spinning machine based on CFD
Purpose: As a new type of spinning machine, the jet spinning machine absorbs the carding system of the rotating cup spinning series and the nozzle part of the jet spinning. This paper aims to intends to introduce the double carding structure currently studied by the rotating cup spinning into the jet spinning machine, and analyze the influence of the nozzle characteristic number on the flow field in the double carding structure to verify the advantages of the double carding structure.Design/methodology/approach: The simulation is used to evaluate the performance of single/double split jet spinning and nozzle feature number, verify the technical advantages of double split jet spinning and evaluate the influence of nozzle feature number on flow field. The influence of the nozzle characteristic number on the flow pattern in the four models is compared. The advantages and disadvantages of a conventional single comb and a double comb with a bypass channel on the longer side of the transport channel as an additional air supply channel are also evaluated.Findings: At present, the double comb technology of rotary cup spinning is being studied at home and abroad to improve the spinning quality and improve the difficult problem of mixed yarn with large difference in processing fiber properties. At present, the jet spinning machine combines the advantages of rotary cup spinning and jet spinning, absorbing the comb system of rotary cup spinning series and the nozzle part of jet spinning. Therefore, it is found that the introduction of the double-split structure into the wool jet spinning has research value to improve the spinning quality.Originality/value: The purpose of this paper is to refer to the previous research on the double comb structure in rotary spinning, and to apply the double comb structure in the new jet spinning machine to improve the spinning quality. The simulation is used to evaluate the performance of single/double split jet spinning and nozzle feature number, verify the technical advantages of double split jet spinning and evaluate the influence of nozzle feature number on flow field.
- 7 May 2024
- Published by Emerald Publishing in International Journal of Clothing Science and Technology
- Vol. 36 (4) , 582-598
Structure analysis of double comb about jet spinning machine based on CFD
Purpose: As a new type of spinning machine, the jet spinning machine absorbs the carding system of the rotating cup spinning series and the nozzle part of the jet spinning. This paper aims to intends to introduce the double carding structure currently studied by the rotating cup spinning into the jet spinning machine, and analyze the influence of the nozzle characteristic number on the flow field in the double carding structure to verify the advantages of the double carding structure.Design/methodology/approach: The simulation is used to evaluate the performance of single/double split jet spinning and nozzle feature number, verify the technical advantages of double split jet spinning and evaluate the influence of nozzle feature number on flow field. The influence of the nozzle characteristic number on the flow pattern in the four models is compared. The advantages and disadvantages of a conventional single comb and a double comb with a bypass channel on the longer side of the transport channel as an additional air supply channel are also evaluated.Findings: At present, the double comb technology of rotary cup spinning is being studied at home and abroad to improve the spinning quality and improve the difficult problem of mixed yarn with large difference in processing fiber properties. At present, the jet spinning machine combines the advantages of rotary cup spinning and jet spinning, absorbing the comb system of rotary cup spinning series and the nozzle part of jet spinning. Therefore, it is found that the introduction of the double-split structure into the wool jet spinning has research value to improve the spinning quality.Originality/value: The purpose of this paper is to refer to the previous research on the double comb structure in rotary spinning, and to apply the double comb structure in the new jet spinning machine to improve the spinning quality. The simulation is used to evaluate the performance of single/double split jet spinning and nozzle feature number, verify the technical advantages of double split jet spinning and evaluate the influence of nozzle feature number on flow field.
- 25 April 2024
- Published by Elsevier in Ocean Engineering
- Vol. 305
Research on cable dynamic response of a catenary anchor leg mooring system based on ANCF
- 25 April 2024
- Published by Elsevier in Ocean Engineering
- Vol. 305
Research on cable dynamic response of a catenary anchor leg mooring system based on ANCF
- Open Access
- 1 January 2024
- Published by National Library of Serbia in Thermal Science
- Vol. 28 (2 Part A) , 851-861
Comparative analysis of cooling effect of battery module cooling plate structures
In order to investigate the impact of cooling plate channel structural parameters on the cooling performance of battery modules, a heat generation model for LiFePO4 batteries was established. Based on the model, the 1C discharge process of LiFePO4 batteries at room temperature (25?) was simulated, and relevant heat release data were obtained. On this basis, three different cooling plate structures (Model A, Model B, Model C) were designed, and the cooling performance of the cooling liquid (50% water and 50% ethylene glycol) for the battery module was analyzed by simulation at different mass-flow rates (0.15 kg/s, 0.18 kg/s, 0.21 kg/s), along with the pressure, temperature difference and flow rate of the cooling channel. The results showed that the uniformity of the flow rate in the channel can reduce the temperature difference. Under the same mass-flow rate, the temperature difference of the battery module on the same surface between Model A and Model C was 1.1?, but too many channels would increase the pressure drop. The pressure drop of Model C was more than 10 times that of Model B. Therefore, it is necessary to design the channel structure reasonably while ensuring the heat dissipation effect. Finally, based on the simulation results, beneficial suggestions for the cooling and cooling plate design and manufacture of energy storage container battery modules are proposed.
- 1 January 2024
- Published by National Library of Serbia in Thermal Science
- Vol. 28 (2 Part A) , 851-861
Open AccessComparative analysis of cooling effect of battery module cooling plate structures
In order to investigate the impact of cooling plate channel structural parameters on the cooling performance of battery modules, a heat generation model for LiFePO4 batteries was established. Based on the model, the 1C discharge process of LiFePO4 batteries at room temperature (25?) was simulated, and relevant heat release data were obtained. On this basis, three different cooling plate structures (Model A, Model B, Model C) were designed, and the cooling performance of the cooling liquid (50% water and 50% ethylene glycol) for the battery module was analyzed by simulation at different mass-flow rates (0.15 kg/s, 0.18 kg/s, 0.21 kg/s), along with the pressure, temperature difference and flow rate of the cooling channel. The results showed that the uniformity of the flow rate in the channel can reduce the temperature difference. Under the same mass-flow rate, the temperature difference of the battery module on the same surface between Model A and Model C was 1.1?, but too many channels would increase the pressure drop. The pressure drop of Model C was more than 10 times that of Model B. Therefore, it is necessary to design the channel structure reasonably while ensuring the heat dissipation effect. Finally, based on the simulation results, beneficial suggestions for the cooling and cooling plate design and manufacture of energy storage container battery modules are proposed.
- Open Access
- 18 March 2022
- Published by Wiley in Computational Intelligence and Neuroscience
- Vol. 2022, 1-10
A Small Network MicronNet-BF of Traffic Sign Classification
One of a very significant computer vision task in many real-world applications is traffic sign recognition. With the development of deep neural networks, state-of-art performance traffic sign recognition has been provided in recent five years. Getting very high accuracy in object classification is not a dream any more. However, one of the key challenges is becoming making the deep neural network suitable for an embedded system. As a result, a small neural network with as less parameters as possible and high accuracy needs to be explored. In this paper, the MicronNet which is a small but powerful convolutional neural network is improved by batch normalization and factorization, and the proposed MicronNet-BN-Factorization (MicronNet-BF) takes advantages about reducing parameters and improving accuracy. The effect of image brightness is reduced for feature recognition by the elimination of mean and variance of each input layer in MicronNet via BN. A lower number of parameters are realized with the replacement of convolutional layers in MicronNet, which is the inspiration of factorization. In addition, data augmentation is also been changed to get higher accuracy. Most important, the experiment shows that the accuracy of MicronNet-BF is 99.383% on German traffic sign recognition benchmark (GTSRB) which is much higher than the original MicronNet (98.9%), and the most influence factor is batch normalization after the confirmation of orthogonal experimental. Furthermore, the handsome training efficiency and generality of MicronNet-BF indicate the wide application in embedded scenarios.
- 18 March 2022
- Published by Wiley in Computational Intelligence and Neuroscience
- Vol. 2022, 1-10
Open AccessA Small Network MicronNet-BF of Traffic Sign Classification
One of a very significant computer vision task in many real-world applications is traffic sign recognition. With the development of deep neural networks, state-of-art performance traffic sign recognition has been provided in recent five years. Getting very high accuracy in object classification is not a dream any more. However, one of the key challenges is becoming making the deep neural network suitable for an embedded system. As a result, a small neural network with as less parameters as possible and high accuracy needs to be explored. In this paper, the MicronNet which is a small but powerful convolutional neural network is improved by batch normalization and factorization, and the proposed MicronNet-BN-Factorization (MicronNet-BF) takes advantages about reducing parameters and improving accuracy. The effect of image brightness is reduced for feature recognition by the elimination of mean and variance of each input layer in MicronNet via BN. A lower number of parameters are realized with the replacement of convolutional layers in MicronNet, which is the inspiration of factorization. In addition, data augmentation is also been changed to get higher accuracy. Most important, the experiment shows that the accuracy of MicronNet-BF is 99.383% on German traffic sign recognition benchmark (GTSRB) which is much higher than the original MicronNet (98.9%), and the most influence factor is batch normalization after the confirmation of orthogonal experimental. Furthermore, the handsome training efficiency and generality of MicronNet-BF indicate the wide application in embedded scenarios.